common/board_r.c

   1 /*
   2  * Copyright (c) 2011 The Chromium OS Authors.
   3  * (C) Copyright 2002-2006
   4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   5  *
   6  * (C) Copyright 2002
   7  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   8  * Marius Groeger <mgroeger@sysgo.de>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #include <common.h>
  14 /* TODO: can we just include all these headers whether needed or not? */
  15 #if defined(CONFIG_CMD_BEDBUG)
  16 #include <bedbug/type.h>
  17 #endif
  18 #include <console.h>
  19 #ifdef CONFIG_HAS_DATAFLASH
  20 #include <dataflash.h>
  21 #endif
  22 #include <dm.h>
  23 #include <environment.h>
  24 #include <fdtdec.h>
  25 #if defined(CONFIG_CMD_IDE)
  26 #include <ide.h>
  27 #endif
  28 #include <initcall.h>
  29 #ifdef CONFIG_PS2KBD
  30 #include <keyboard.h>
  31 #endif
  32 #if defined(CONFIG_CMD_KGDB)
  33 #include <kgdb.h>
  34 #endif
  35 #include <logbuff.h>
  36 #include <malloc.h>
  37 #include <mapmem.h>
  38 #ifdef CONFIG_BITBANGMII
  39 #include <miiphy.h>
  40 #endif
  41 #include <mmc.h>
  42 #include <nand.h>
  43 #include <onenand_uboot.h>
  44 #include <scsi.h>
  45 #include <serial.h>
  46 #include <spi.h>
  47 #include <stdio_dev.h>
  48 #include <trace.h>
  49 #include <watchdog.h>
  50 #ifdef CONFIG_CMD_AMBAPP
  51 #include <ambapp.h>
  52 #endif
  53 #ifdef CONFIG_ADDR_MAP
  54 #include <asm/mmu.h>
  55 #endif
  56 #include <asm/sections.h>
  57 #ifdef CONFIG_X86
  58 #include <asm/init_helpers.h>
  59 #endif
  60 #include <dm/root.h>
  61 #include <linux/compiler.h>
  62 #include <linux/err.h>
  63 #ifdef CONFIG_AVR32
  64 #include <asm/arch/mmu.h>
  65 #endif
  66
  67 DECLARE_GLOBAL_DATA_PTR;
  68
  69 #if defined(CONFIG_SPARC)
  70 extern int prom_init(void);
  71 #endif
  72
  73 ulong monitor_flash_len;
  74
  75 __weak int board_flash_wp_on(void)
  76 {
  77         /*
  78          * Most flashes can't be detected when write protection is enabled,
  79          * so provide a way to let U-Boot gracefully ignore write protected
  80          * devices.
  81          */
  82         return 0;
  83 }
  84
  85 __weak void cpu_secondary_init_r(void)
  86 {
  87 }
  88
  89 static int initr_secondary_cpu(void)
  90 {
  91         /*
  92          * after non-volatile devices & environment is setup and cpu code have
  93          * another round to deal with any initialization that might require
  94          * full access to the environment or loading of some image (firmware)
  95          * from a non-volatile device
  96          */
  97         /* TODO: maybe define this for all archs? */
  98         cpu_secondary_init_r();
  99
 100         return 0;
 101 }
 102
 103 static int initr_trace(void)
 104 {
 105 #ifdef CONFIG_TRACE
 106         trace_init(gd->trace_buff, CONFIG_TRACE_BUFFER_SIZE);
 107 #endif
 108
 109         return 0;
 110 }
 111
 112 static int initr_reloc(void)
 113 {
 114         /* tell others: relocation done */
 115         gd->flags |= GD_FLG_RELOC | GD_FLG_FULL_MALLOC_INIT;
 116
 117         return 0;
 118 }
 119
 120 #ifdef CONFIG_ARM
 121 /*
 122  * Some of these functions are needed purely because the functions they
 123  * call return void. If we change them to return 0, these stubs can go away.
 124  */
 125 static int initr_caches(void)
 126 {
 127         /* Enable caches */
 128         enable_caches();
 129         return 0;
 130 }
 131 #endif
 132
 133 __weak int fixup_cpu(void)
 134 {
 135         return 0;
 136 }
 137
 138 static int initr_reloc_global_data(void)
 139 {
 140 #ifdef __ARM__
 141         monitor_flash_len = _end - __image_copy_start;
 142 #elif defined(CONFIG_NDS32)
 143         monitor_flash_len = (ulong)&_end - (ulong)&_start;
 144 #elif !defined(CONFIG_SANDBOX) && !defined(CONFIG_NIOS2)
 145         monitor_flash_len = (ulong)&__init_end - gd->relocaddr;
 146 #endif
 147 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
 148         /*
 149          * The gd->cpu pointer is set to an address in flash before relocation.
 150          * We need to update it to point to the same CPU entry in RAM.
 151          * TODO: why not just add gd->reloc_ofs?
 152          */
 153         gd->arch.cpu += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
 154
 155         /*
 156          * If we didn't know the cpu mask & # cores, we can save them of
 157          * now rather than 'computing' them constantly
 158          */
 159         fixup_cpu();
 160 #endif
 161 #ifdef CONFIG_SYS_EXTRA_ENV_RELOC
 162         /*
 163          * Some systems need to relocate the env_addr pointer early because the
 164          * location it points to will get invalidated before env_relocate is
 165          * called.  One example is on systems that might use a L2 or L3 cache
 166          * in SRAM mode and initialize that cache from SRAM mode back to being
 167          * a cache in cpu_init_r.
 168          */
 169         gd->env_addr += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
 170 #endif
 171         return 0;
 172 }
 173
 174 static int initr_serial(void)
 175 {
 176         serial_initialize();
 177         return 0;
 178 }
 179
 180 #if defined(CONFIG_PPC) || defined(CONFIG_M68K)
 181 static int initr_trap(void)
 182 {
 183         /*
 184          * Setup trap handlers
 185          */
 186 #if defined(CONFIG_PPC)
 187         trap_init(gd->relocaddr);
 188 #else
 189         trap_init(CONFIG_SYS_SDRAM_BASE);
 190 #endif
 191         return 0;
 192 }
 193 #endif
 194
 195 #ifdef CONFIG_ADDR_MAP
 196 static int initr_addr_map(void)
 197 {
 198         init_addr_map();
 199
 200         return 0;
 201 }
 202 #endif
 203
 204 #ifdef CONFIG_LOGBUFFER
 205 unsigned long logbuffer_base(void)
 206 {
 207         return gd->ram_top - LOGBUFF_LEN;
 208 }
 209
 210 static int initr_logbuffer(void)
 211 {
 212         logbuff_init_ptrs();
 213         return 0;
 214 }
 215 #endif
 216
 217 #ifdef CONFIG_POST
 218 static int initr_post_backlog(void)
 219 {
 220         post_output_backlog();
 221         return 0;
 222 }
 223 #endif
 224
 225 #ifdef CONFIG_SYS_DELAYED_ICACHE
 226 static int initr_icache_enable(void)
 227 {
 228         return 0;
 229 }
 230 #endif
 231
 232 #if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
 233 static int initr_unlock_ram_in_cache(void)
 234 {
 235         unlock_ram_in_cache();  /* it's time to unlock D-cache in e500 */
 236         return 0;
 237 }
 238 #endif
 239
 240 #ifdef CONFIG_PCI
 241 static int initr_pci(void)
 242 {
 243 #ifndef CONFIG_DM_PCI
 244         pci_init();
 245 #endif
 246
 247         return 0;
 248 }
 249 #endif
 250
 251 #ifdef CONFIG_WINBOND_83C553
 252 static int initr_w83c553f(void)
 253 {
 254         /*
 255          * Initialise the ISA bridge
 256          */
 257         initialise_w83c553f();
 258         return 0;
 259 }
 260 #endif
 261
 262 static int initr_barrier(void)
 263 {
 264 #ifdef CONFIG_PPC
 265         /* TODO: Can we not use dmb() macros for this? */
 266         asm("sync ; isync");
 267 #endif
 268         return 0;
 269 }
 270
 271 static int initr_malloc(void)
 272 {
 273         ulong malloc_start;
 274
 275 #ifdef CONFIG_SYS_MALLOC_F_LEN
 276         debug("Pre-reloc malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
 277               gd->malloc_ptr / 1024);
 278 #endif
 279         /* The malloc area is immediately below the monitor copy in DRAM */
 280         malloc_start = gd->relocaddr - TOTAL_MALLOC_LEN;
 281         mem_malloc_init((ulong)map_sysmem(malloc_start, TOTAL_MALLOC_LEN),
 282                         TOTAL_MALLOC_LEN);
 283         return 0;
 284 }
 285
 286 static int initr_console_record(void)
 287 {
 288 #if defined(CONFIG_CONSOLE_RECORD)
 289         return console_record_init();
 290 #else
 291         return 0;
 292 #endif
 293 }
 294
 295 #ifdef CONFIG_SYS_NONCACHED_MEMORY
 296 static int initr_noncached(void)
 297 {
 298         noncached_init();
 299         return 0;
 300 }
 301 #endif
 302
 303 #ifdef CONFIG_DM
 304 static int initr_dm(void)
 305 {
 306         /* Save the pre-reloc driver model and start a new one */
 307         gd->dm_root_f = gd->dm_root;
 308         gd->dm_root = NULL;
 309 #ifdef CONFIG_TIMER
 310         gd->timer = NULL;
 311 #endif
 312         return dm_init_and_scan(false);
 313 }
 314 #endif
 315
 316 static int initr_bootstage(void)
 317 {
 318         /* We cannot do this before initr_dm() */
 319         bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
 320
 321         return 0;
 322 }
 323
 324 __weak int power_init_board(void)
 325 {
 326         return 0;
 327 }
 328
 329 static int initr_announce(void)
 330 {
 331         debug("Now running in RAM - U-Boot at: %08lx\n", gd->relocaddr);
 332         return 0;
 333 }
 334
 335 #ifdef CONFIG_NEEDS_MANUAL_RELOC
 336 static int initr_manual_reloc_cmdtable(void)
 337 {
 338         fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
 339                        ll_entry_count(cmd_tbl_t, cmd));
 340         return 0;
 341 }
 342 #endif
 343
 344 #if !defined(CONFIG_SYS_NO_FLASH)
 345 static int initr_flash(void)
 346 {
 347         ulong flash_size = 0;
 348         bd_t *bd = gd->bd;
 349
 350         puts("Flash: ");
 351
 352         if (board_flash_wp_on())
 353                 printf("Uninitialized - Write Protect On\n");
 354         else
 355                 flash_size = flash_init();
 356
 357         print_size(flash_size, "");
 358 #ifdef CONFIG_SYS_FLASH_CHECKSUM
 359         /*
 360         * Compute and print flash CRC if flashchecksum is set to 'y'
 361         *
 362         * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 363         */
 364         if (getenv_yesno("flashchecksum") == 1) {
 365                 printf("  CRC: %08X", crc32(0,
 366                         (const unsigned char *) CONFIG_SYS_FLASH_BASE,
 367                         flash_size));
 368         }
 369 #endif /* CONFIG_SYS_FLASH_CHECKSUM */
 370         putc('\n');
 371
 372         /* update start of FLASH memory    */
 373 #ifdef CONFIG_SYS_FLASH_BASE
 374         bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
 375 #endif
 376         /* size of FLASH memory (final value) */
 377         bd->bi_flashsize = flash_size;
 378
 379 #if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
 380         /* Make a update of the Memctrl. */
 381         update_flash_size(flash_size);
 382 #endif
 383
 384
 385 #if defined(CONFIG_OXC) || defined(CONFIG_RMU)
 386         /* flash mapped at end of memory map */
 387         bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size;
 388 #elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
 389         bd->bi_flashoffset = monitor_flash_len; /* reserved area for monitor */
 390 #endif
 391         return 0;
 392 }
 393 #endif
 394
 395 #if defined(CONFIG_PPC) && !defined(CONFIG_DM_SPI)
 396 static int initr_spi(void)
 397 {
 398         /* PPC does this here */
 399 #ifdef CONFIG_SPI
 400 #if !defined(CONFIG_ENV_IS_IN_EEPROM)
 401         spi_init_f();
 402 #endif
 403         spi_init_r();
 404 #endif
 405         return 0;
 406 }
 407 #endif
 408
 409 #ifdef CONFIG_CMD_NAND
 410 /* go init the NAND */
 411 static int initr_nand(void)
 412 {
 413         puts("NAND:  ");
 414         nand_init();
 415         return 0;
 416 }
 417 #endif
 418
 419 #if defined(CONFIG_CMD_ONENAND)
 420 /* go init the NAND */
 421 static int initr_onenand(void)
 422 {
 423         puts("NAND:  ");
 424         onenand_init();
 425         return 0;
 426 }
 427 #endif
 428
 429 #ifdef CONFIG_GENERIC_MMC
 430 static int initr_mmc(void)
 431 {
 432         puts("MMC:   ");
 433         mmc_initialize(gd->bd);
 434         return 0;
 435 }
 436 #endif
 437
 438 #ifdef CONFIG_HAS_DATAFLASH
 439 static int initr_dataflash(void)
 440 {
 441         AT91F_DataflashInit();
 442         dataflash_print_info();
 443         return 0;
 444 }
 445 #endif
 446
 447 /*
 448  * Tell if it's OK to load the environment early in boot.
 449  *
 450  * If CONFIG_OF_CONFIG is defined, we'll check with the FDT to see
 451  * if this is OK (defaulting to saying it's OK).
 452  *
 453  * NOTE: Loading the environment early can be a bad idea if security is
 454  *       important, since no verification is done on the environment.
 455  *
 456  * @return 0 if environment should not be loaded, !=0 if it is ok to load
 457  */
 458 static int should_load_env(void)
 459 {
 460 #ifdef CONFIG_OF_CONTROL
 461         return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 1);
 462 #elif defined CONFIG_DELAY_ENVIRONMENT
 463         return 0;
 464 #else
 465         return 1;
 466 #endif
 467 }
 468
 469 static int initr_env(void)
 470 {
 471         /* initialize environment */
 472         if (should_load_env())
 473                 env_relocate();
 474         else
 475                 set_default_env(NULL);
 476 #ifdef CONFIG_OF_CONTROL
 477         setenv_addr("fdtcontroladdr", gd->fdt_blob);
 478 #endif
 479
 480         /* Initialize from environment */
 481         load_addr = getenv_ulong("loadaddr", 16, load_addr);
 482 #if defined(CONFIG_SYS_EXTBDINFO)
 483 #if defined(CONFIG_405GP) || defined(CONFIG_405EP)
 484 #if defined(CONFIG_I2CFAST)
 485         /*
 486          * set bi_iic_fast for linux taking environment variable
 487          * "i2cfast" into account
 488          */
 489         {
 490                 char *s = getenv("i2cfast");
 491
 492                 if (s && ((*s == 'y') || (*s == 'Y'))) {
 493                         gd->bd->bi_iic_fast[0] = 1;
 494                         gd->bd->bi_iic_fast[1] = 1;
 495                 }
 496         }
 497 #endif /* CONFIG_I2CFAST */
 498 #endif /* CONFIG_405GP, CONFIG_405EP */
 499 #endif /* CONFIG_SYS_EXTBDINFO */
 500         return 0;
 501 }
 502
 503 #ifdef CONFIG_SYS_BOOTPARAMS_LEN
 504 static int initr_malloc_bootparams(void)
 505 {
 506         gd->bd->bi_boot_params = (ulong)malloc(CONFIG_SYS_BOOTPARAMS_LEN);
 507         if (!gd->bd->bi_boot_params) {
 508                 puts("WARNING: Cannot allocate space for boot parameters\n");
 509                 return -ENOMEM;
 510         }
 511         return 0;
 512 }
 513 #endif
 514
 515 static int initr_jumptable(void)
 516 {
 517         jumptable_init();
 518         return 0;
 519 }
 520
 521 #if defined(CONFIG_API)
 522 static int initr_api(void)
 523 {
 524         /* Initialize API */
 525         api_init();
 526         return 0;
 527 }
 528 #endif
 529
 530 /* enable exceptions */
 531 #if defined(CONFIG_ARM) || defined(CONFIG_AVR32)
 532 static int initr_enable_interrupts(void)
 533 {
 534         enable_interrupts();
 535         return 0;
 536 }
 537 #endif
 538
 539 #ifdef CONFIG_CMD_NET
 540 static int initr_ethaddr(void)
 541 {
 542         bd_t *bd = gd->bd;
 543
 544         /* kept around for legacy kernels only ... ignore the next section */
 545         eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
 546 #ifdef CONFIG_HAS_ETH1
 547         eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr);
 548 #endif
 549 #ifdef CONFIG_HAS_ETH2
 550         eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr);
 551 #endif
 552 #ifdef CONFIG_HAS_ETH3
 553         eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr);
 554 #endif
 555 #ifdef CONFIG_HAS_ETH4
 556         eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr);
 557 #endif
 558 #ifdef CONFIG_HAS_ETH5
 559         eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr);
 560 #endif
 561         return 0;
 562 }
 563 #endif /* CONFIG_CMD_NET */
 564
 565 #ifdef CONFIG_CMD_KGDB
 566 static int initr_kgdb(void)
 567 {
 568         puts("KGDB:  ");
 569         kgdb_init();
 570         return 0;
 571 }
 572 #endif
 573
 574 #if defined(CONFIG_STATUS_LED)
 575 static int initr_status_led(void)
 576 {
 577 #if defined(STATUS_LED_BOOT)
 578         status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
 579 #else
 580         status_led_init();
 581 #endif
 582         return 0;
 583 }
 584 #endif
 585
 586 #if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
 587 extern int do_ambapp_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 588
 589 static int initr_ambapp_print(void)
 590 {
 591         puts("AMBA:\n");
 592         do_ambapp_print(NULL, 0, 0, NULL);
 593
 594         return 0;
 595 }
 596 #endif
 597
 598 #if defined(CONFIG_CMD_SCSI)
 599 static int initr_scsi(void)
 600 {
 601         puts("SCSI:  ");
 602         scsi_init();
 603
 604         return 0;
 605 }
 606 #endif
 607
 608 #if defined(CONFIG_CMD_DOC)
 609 static int initr_doc(void)
 610 {
 611         puts("DOC:   ");
 612         doc_init();
 613         return 0;
 614 }
 615 #endif
 616
 617 #ifdef CONFIG_BITBANGMII
 618 static int initr_bbmii(void)
 619 {
 620         bb_miiphy_init();
 621         return 0;
 622 }
 623 #endif
 624
 625 #ifdef CONFIG_CMD_NET
 626 static int initr_net(void)
 627 {
 628         puts("Net:   ");
 629         eth_initialize();
 630 #if defined(CONFIG_RESET_PHY_R)
 631         debug("Reset Ethernet PHY\n");
 632         reset_phy();
 633 #endif
 634         return 0;
 635 }
 636 #endif
 637
 638 #ifdef CONFIG_POST
 639 static int initr_post(void)
 640 {
 641         post_run(NULL, POST_RAM | post_bootmode_get(0));
 642         return 0;
 643 }
 644 #endif
 645
 646 #if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
 647 static int initr_pcmcia(void)
 648 {
 649         puts("PCMCIA:");
 650         pcmcia_init();
 651         return 0;
 652 }
 653 #endif
 654
 655 #if defined(CONFIG_CMD_IDE)
 656 static int initr_ide(void)
 657 {
 658 #ifdef  CONFIG_IDE_8xx_PCCARD
 659         puts("PCMCIA:");
 660 #else
 661         puts("IDE:   ");
 662 #endif
 663 #if defined(CONFIG_START_IDE)
 664         if (board_start_ide())
 665                 ide_init();
 666 #else
 667         ide_init();
 668 #endif
 669         return 0;
 670 }
 671 #endif
 672
 673 #if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
 674 /*
 675  * Export available size of memory for Linux, taking into account the
 676  * protected RAM at top of memory
 677  */
 678 int initr_mem(void)
 679 {
 680         ulong pram = 0;
 681         char memsz[32];
 682
 683 # ifdef CONFIG_PRAM
 684         pram = getenv_ulong("pram", 10, CONFIG_PRAM);
 685 # endif
 686 # if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
 687         /* Also take the logbuffer into account (pram is in kB) */
 688         pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
 689 # endif
 690         sprintf(memsz, "%ldk", (long int) ((gd->ram_size / 1024) - pram));
 691         setenv("mem", memsz);
 692
 693         return 0;
 694 }
 695 #endif
 696
 697 #ifdef CONFIG_CMD_BEDBUG
 698 static int initr_bedbug(void)
 699 {
 700         bedbug_init();
 701
 702         return 0;
 703 }
 704 #endif
 705
 706 #ifdef CONFIG_PS2KBD
 707 static int initr_kbd(void)
 708 {
 709         puts("PS/2:  ");
 710         kbd_init();
 711         return 0;
 712 }
 713 #endif
 714
 715 static int run_main_loop(void)
 716 {
 717 #ifdef CONFIG_SANDBOX
 718         sandbox_main_loop_init();
 719 #endif
 720         /* main_loop() can return to retry autoboot, if so just run it again */
 721         for (;;)
 722                 main_loop();
 723         return 0;
 724 }
 725
 726 /*
 727  * Over time we hope to remove these functions with code fragments and
 728  * stub funtcions, and instead call the relevant function directly.
 729  *
 730  * We also hope to remove most of the driver-related init and do it if/when
 731  * the driver is later used.
 732  *
 733  * TODO: perhaps reset the watchdog in the initcall function after each call?
 734  */
 735 init_fnc_t init_sequence_r[] = {
 736         initr_trace,
 737         initr_reloc,
 738         /* TODO: could x86/PPC have this also perhaps? */
 739 #ifdef CONFIG_ARM
 740         initr_caches,
 741         /* Note: For Freescale LS2 SoCs, new MMU table is created in DDR.
 742          *       A temporary mapping of IFC high region is since removed,
 743          *       so environmental variables in NOR flash is not availble
 744          *       until board_init() is called below to remap IFC to high
 745          *       region.
 746          */
 747 #endif
 748         initr_reloc_global_data,
 749 #if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
 750         initr_unlock_ram_in_cache,
 751 #endif
 752         initr_barrier,
 753         initr_malloc,
 754         initr_console_record,
 755 #ifdef CONFIG_SYS_NONCACHED_MEMORY
 756         initr_noncached,
 757 #endif
 758         bootstage_relocate,
 759 #ifdef CONFIG_DM
 760         initr_dm,
 761 #endif
 762         initr_bootstage,
 763 #if defined(CONFIG_ARM) || defined(CONFIG_NDS32)
 764         board_init,     /* Setup chipselects */
 765 #endif
 766         /*
 767          * TODO: printing of the clock inforamtion of the board is now
 768          * implemented as part of bdinfo command. Currently only support for
 769          * davinci SOC's is added. Remove this check once all the board
 770          * implement this.
 771          */
 772 #ifdef CONFIG_CLOCKS
 773         set_cpu_clk_info, /* Setup clock information */
 774 #endif
 775         stdio_init_tables,
 776         initr_serial,
 777         initr_announce,
 778         INIT_FUNC_WATCHDOG_RESET
 779 #ifdef CONFIG_NEEDS_MANUAL_RELOC
 780         initr_manual_reloc_cmdtable,
 781 #endif
 782 #if defined(CONFIG_PPC) || defined(CONFIG_M68K)
 783         initr_trap,
 784 #endif
 785 #ifdef CONFIG_ADDR_MAP
 786         initr_addr_map,
 787 #endif
 788 #if defined(CONFIG_BOARD_EARLY_INIT_R)
 789         board_early_init_r,
 790 #endif
 791         INIT_FUNC_WATCHDOG_RESET
 792 #ifdef CONFIG_LOGBUFFER
 793         initr_logbuffer,
 794 #endif
 795 #ifdef CONFIG_POST
 796         initr_post_backlog,
 797 #endif
 798         INIT_FUNC_WATCHDOG_RESET
 799 #ifdef CONFIG_SYS_DELAYED_ICACHE
 800         initr_icache_enable,
 801 #endif
 802 #if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT)
 803         /*
 804          * Do early PCI configuration _before_ the flash gets initialised,
 805          * because PCU ressources are crucial for flash access on some boards.
 806          */
 807         initr_pci,
 808 #endif
 809 #ifdef CONFIG_WINBOND_83C553
 810         initr_w83c553f,
 811 #endif
 812 #ifdef CONFIG_ARCH_EARLY_INIT_R
 813         arch_early_init_r,
 814 #endif
 815         power_init_board,
 816 #ifndef CONFIG_SYS_NO_FLASH
 817         initr_flash,
 818 #endif
 819         INIT_FUNC_WATCHDOG_RESET
 820 #if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_X86) || \
 821         defined(CONFIG_SPARC)
 822         /* initialize higher level parts of CPU like time base and timers */
 823         cpu_init_r,
 824 #endif
 825 #ifdef CONFIG_PPC
 826         initr_spi,
 827 #endif
 828 #ifdef CONFIG_CMD_NAND
 829         initr_nand,
 830 #endif
 831 #ifdef CONFIG_CMD_ONENAND
 832         initr_onenand,
 833 #endif
 834 #ifdef CONFIG_GENERIC_MMC
 835         initr_mmc,
 836 #endif
 837 #ifdef CONFIG_HAS_DATAFLASH
 838         initr_dataflash,
 839 #endif
 840         initr_env,
 841 #ifdef CONFIG_SYS_BOOTPARAMS_LEN
 842         initr_malloc_bootparams,
 843 #endif
 844         INIT_FUNC_WATCHDOG_RESET
 845         initr_secondary_cpu,
 846 #if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
 847         mac_read_from_eeprom,
 848 #endif
 849         INIT_FUNC_WATCHDOG_RESET
 850 #if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT)
 851         /*
 852          * Do pci configuration
 853          */
 854         initr_pci,
 855 #endif
 856         stdio_add_devices,
 857         initr_jumptable,
 858 #ifdef CONFIG_API
 859         initr_api,
 860 #endif
 861         console_init_r,         /* fully init console as a device */
 862 #ifdef CONFIG_DISPLAY_BOARDINFO_LATE
 863         show_board_info,
 864 #endif
 865 #ifdef CONFIG_ARCH_MISC_INIT
 866         arch_misc_init,         /* miscellaneous arch-dependent init */
 867 #endif
 868 #ifdef CONFIG_MISC_INIT_R
 869         misc_init_r,            /* miscellaneous platform-dependent init */
 870 #endif
 871         INIT_FUNC_WATCHDOG_RESET
 872 #ifdef CONFIG_CMD_KGDB
 873         initr_kgdb,
 874 #endif
 875         interrupt_init,
 876 #if defined(CONFIG_ARM) || defined(CONFIG_AVR32)
 877         initr_enable_interrupts,
 878 #endif
 879 #if defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32) || defined(CONFIG_M68K)
 880         timer_init,             /* initialize timer */
 881 #endif
 882 #if defined(CONFIG_STATUS_LED)
 883         initr_status_led,
 884 #endif
 885         /* PPC has a udelay(20) here dating from 2002. Why? */
 886 #ifdef CONFIG_CMD_NET
 887         initr_ethaddr,
 888 #endif
 889 #ifdef CONFIG_BOARD_LATE_INIT
 890         board_late_init,
 891 #endif
 892 #if defined(CONFIG_CMD_AMBAPP)
 893         ambapp_init_reloc,
 894 #if defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
 895         initr_ambapp_print,
 896 #endif
 897 #endif
 898 #ifdef CONFIG_CMD_SCSI
 899         INIT_FUNC_WATCHDOG_RESET
 900         initr_scsi,
 901 #endif
 902 #ifdef CONFIG_CMD_DOC
 903         INIT_FUNC_WATCHDOG_RESET
 904         initr_doc,
 905 #endif
 906 #ifdef CONFIG_BITBANGMII
 907         initr_bbmii,
 908 #endif
 909 #ifdef CONFIG_CMD_NET
 910         INIT_FUNC_WATCHDOG_RESET
 911         initr_net,
 912 #endif
 913 #ifdef CONFIG_POST
 914         initr_post,
 915 #endif
 916 #if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
 917         initr_pcmcia,
 918 #endif
 919 #if defined(CONFIG_CMD_IDE)
 920         initr_ide,
 921 #endif
 922 #ifdef CONFIG_LAST_STAGE_INIT
 923         INIT_FUNC_WATCHDOG_RESET
 924         /*
 925          * Some parts can be only initialized if all others (like
 926          * Interrupts) are up and running (i.e. the PC-style ISA
 927          * keyboard).
 928          */
 929         last_stage_init,
 930 #endif
 931 #ifdef CONFIG_CMD_BEDBUG
 932         INIT_FUNC_WATCHDOG_RESET
 933         initr_bedbug,
 934 #endif
 935 #if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
 936         initr_mem,
 937 #endif
 938 #ifdef CONFIG_PS2KBD
 939         initr_kbd,
 940 #endif
 941 #if defined(CONFIG_SPARC)
 942         prom_init,
 943 #endif
 944         run_main_loop,
 945 };
 946
 947 void board_init_r(gd_t *new_gd, ulong dest_addr)
 948 {
 949 #ifdef CONFIG_NEEDS_MANUAL_RELOC
 950         int i;
 951 #endif
 952
 953 #ifdef CONFIG_AVR32
 954         mmu_init_r(dest_addr);
 955 #endif
 956
 957 #if !defined(CONFIG_X86) && !defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
 958         gd = new_gd;
 959 #endif
 960
 961 #ifdef CONFIG_NEEDS_MANUAL_RELOC
 962         for (i = 0; i < ARRAY_SIZE(init_sequence_r); i++)
 963                 init_sequence_r[i] += gd->reloc_off;
 964 #endif
 965
 966         if (initcall_run_list(init_sequence_r))
 967                 hang();
 968
 969         /* NOTREACHED - run_main_loop() does not return */
 970         hang();
 971 }