2 * Copyright (c) 2013, Google Inc.
4 * (C) Copyright 2008 Semihalf
6 * (C) Copyright 2000-2006
7 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
9 * SPDX-License-Identifier: GPL-2.0+
13 #include <fdt_support.h>
19 #ifndef CONFIG_SYS_FDT_PAD
20 #define CONFIG_SYS_FDT_PAD 0x3000
23 DECLARE_GLOBAL_DATA_PTR
;
25 static void fdt_error(const char *msg
)
29 puts(" - must RESET the board to recover.\n");
32 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
33 static const image_header_t
*image_get_fdt(ulong fdt_addr
)
35 const image_header_t
*fdt_hdr
= map_sysmem(fdt_addr
, 0);
37 image_print_contents(fdt_hdr
);
39 puts(" Verifying Checksum ... ");
40 if (!image_check_hcrc(fdt_hdr
)) {
41 fdt_error("fdt header checksum invalid");
45 if (!image_check_dcrc(fdt_hdr
)) {
46 fdt_error("fdt checksum invalid");
51 if (!image_check_type(fdt_hdr
, IH_TYPE_FLATDT
)) {
52 fdt_error("uImage is not a fdt");
55 if (image_get_comp(fdt_hdr
) != IH_COMP_NONE
) {
56 fdt_error("uImage is compressed");
59 if (fdt_check_header((void *)image_get_data(fdt_hdr
)) != 0) {
60 fdt_error("uImage data is not a fdt");
68 * boot_fdt_add_mem_rsv_regions - Mark the memreserve sections as unusable
69 * @lmb: pointer to lmb handle, will be used for memory mgmt
70 * @fdt_blob: pointer to fdt blob base address
72 * Adds the memreserve regions in the dtb to the lmb block. Adding the
73 * memreserve regions prevents u-boot from using them to store the initrd
76 void boot_fdt_add_mem_rsv_regions(struct lmb
*lmb
, void *fdt_blob
)
81 if (fdt_check_header(fdt_blob
) != 0)
84 total
= fdt_num_mem_rsv(fdt_blob
);
85 for (i
= 0; i
< total
; i
++) {
86 if (fdt_get_mem_rsv(fdt_blob
, i
, &addr
, &size
) != 0)
88 printf(" reserving fdt memory region: addr=%llx size=%llx\n",
89 (unsigned long long)addr
, (unsigned long long)size
);
90 lmb_reserve(lmb
, addr
, size
);
95 * boot_relocate_fdt - relocate flat device tree
96 * @lmb: pointer to lmb handle, will be used for memory mgmt
97 * @of_flat_tree: pointer to a char* variable, will hold fdt start address
98 * @of_size: pointer to a ulong variable, will hold fdt length
100 * boot_relocate_fdt() allocates a region of memory within the bootmap and
101 * relocates the of_flat_tree into that region, even if the fdt is already in
102 * the bootmap. It also expands the size of the fdt by CONFIG_SYS_FDT_PAD
105 * of_flat_tree and of_size are set to final (after relocation) values
111 int boot_relocate_fdt(struct lmb
*lmb
, char **of_flat_tree
, ulong
*of_size
)
113 void *fdt_blob
= *of_flat_tree
;
114 void *of_start
= NULL
;
118 int disable_relocation
= 0;
124 if (fdt_check_header(fdt_blob
) != 0) {
125 fdt_error("image is not a fdt");
129 /* position on a 4K boundary before the alloc_current */
130 /* Pad the FDT by a specified amount */
131 of_len
= *of_size
+ CONFIG_SYS_FDT_PAD
;
133 /* If fdt_high is set use it to select the relocation address */
134 fdt_high
= getenv("fdt_high");
136 void *desired_addr
= (void *)simple_strtoul(fdt_high
, NULL
, 16);
138 if (((ulong
) desired_addr
) == ~0UL) {
139 /* All ones means use fdt in place */
141 lmb_reserve(lmb
, (ulong
)of_start
, of_len
);
142 disable_relocation
= 1;
143 } else if (desired_addr
) {
145 (void *)(ulong
) lmb_alloc_base(lmb
, of_len
, 0x1000,
146 (ulong
)desired_addr
);
147 if (of_start
== NULL
) {
148 puts("Failed using fdt_high value for Device Tree");
153 (void *)(ulong
) lmb_alloc(lmb
, of_len
, 0x1000);
157 (void *)(ulong
) lmb_alloc_base(lmb
, of_len
, 0x1000,
158 getenv_bootm_mapsize()
159 + getenv_bootm_low());
162 if (of_start
== NULL
) {
163 puts("device tree - allocation error\n");
167 if (disable_relocation
) {
169 * We assume there is space after the existing fdt to use
172 fdt_set_totalsize(of_start
, of_len
);
173 printf(" Using Device Tree in place at %p, end %p\n",
174 of_start
, of_start
+ of_len
- 1);
176 debug("## device tree at %p ... %p (len=%ld [0x%lX])\n",
177 fdt_blob
, fdt_blob
+ *of_size
- 1, of_len
, of_len
);
179 printf(" Loading Device Tree to %p, end %p ... ",
180 of_start
, of_start
+ of_len
- 1);
182 err
= fdt_open_into(fdt_blob
, of_start
, of_len
);
184 fdt_error("fdt move failed");
190 *of_flat_tree
= of_start
;
193 set_working_fdt_addr(*of_flat_tree
);
201 * boot_get_fdt - main fdt handling routine
202 * @argc: command argument count
203 * @argv: command argument list
204 * @arch: architecture (IH_ARCH_...)
205 * @images: pointer to the bootm images structure
206 * @of_flat_tree: pointer to a char* variable, will hold fdt start address
207 * @of_size: pointer to a ulong variable, will hold fdt length
209 * boot_get_fdt() is responsible for finding a valid flat device tree image.
210 * Curently supported are the following ramdisk sources:
211 * - multicomponent kernel/ramdisk image,
212 * - commandline provided address of decicated ramdisk image.
215 * 0, if fdt image was found and valid, or skipped
216 * of_flat_tree and of_size are set to fdt start address and length if
217 * fdt image is found and valid
219 * 1, if fdt image is found but corrupted
220 * of_flat_tree and of_size are set to 0 if no fdt exists
222 int boot_get_fdt(int flag
, int argc
, char * const argv
[], uint8_t arch
,
223 bootm_headers_t
*images
, char **of_flat_tree
, ulong
*of_size
)
225 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
226 const image_header_t
*fdt_hdr
;
227 ulong load
, load_end
;
228 ulong image_start
, image_data
, image_end
;
231 char *fdt_blob
= NULL
;
233 #if defined(CONFIG_FIT)
234 const char *fit_uname_config
= images
->fit_uname_cfg
;
235 const char *fit_uname_fdt
= NULL
;
239 const char *select
= NULL
;
241 *of_flat_tree
= NULL
;
246 if (select
|| genimg_has_config(images
)) {
247 #if defined(CONFIG_FIT)
250 * If the FDT blob comes from the FIT image and the
251 * FIT image address is omitted in the command line
252 * argument, try to use ramdisk or os FIT image
253 * address or default load address.
255 if (images
->fit_uname_rd
)
256 default_addr
= (ulong
)images
->fit_hdr_rd
;
257 else if (images
->fit_uname_os
)
258 default_addr
= (ulong
)images
->fit_hdr_os
;
260 default_addr
= load_addr
;
262 if (fit_parse_conf(select
, default_addr
,
263 &fdt_addr
, &fit_uname_config
)) {
264 debug("* fdt: config '%s' from image at 0x%08lx\n",
265 fit_uname_config
, fdt_addr
);
266 } else if (fit_parse_subimage(select
, default_addr
,
267 &fdt_addr
, &fit_uname_fdt
)) {
268 debug("* fdt: subimage '%s' from image at 0x%08lx\n",
269 fit_uname_fdt
, fdt_addr
);
273 fdt_addr
= simple_strtoul(select
, NULL
, 16);
274 debug("* fdt: cmdline image address = 0x%08lx\n",
277 #if defined(CONFIG_FIT)
279 /* use FIT configuration provided in first bootm
282 fdt_addr
= map_to_sysmem(images
->fit_hdr_os
);
283 fdt_noffset
= fit_get_node_from_config(images
,
286 if (fdt_noffset
== -ENOLINK
)
288 else if (fdt_noffset
< 0)
292 debug("## Checking for 'FDT'/'FDT Image' at %08lx\n",
295 /* copy from dataflash if needed */
296 fdt_addr
= genimg_get_image(fdt_addr
);
299 * Check if there is an FDT image at the
300 * address provided in the second bootm argument
301 * check image type, for FIT images get a FIT node.
303 buf
= map_sysmem(fdt_addr
, 0);
304 switch (genimg_get_format(buf
)) {
305 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
306 case IMAGE_FORMAT_LEGACY
:
307 /* verify fdt_addr points to a valid image header */
308 printf("## Flattened Device Tree from Legacy Image at %08lx\n",
310 fdt_hdr
= image_get_fdt(fdt_addr
);
315 * move image data to the load address,
316 * make sure we don't overwrite initial image
318 image_start
= (ulong
)fdt_hdr
;
319 image_data
= (ulong
)image_get_data(fdt_hdr
);
320 image_end
= image_get_image_end(fdt_hdr
);
322 load
= image_get_load(fdt_hdr
);
323 load_end
= load
+ image_get_data_size(fdt_hdr
);
325 if (load
== image_start
||
326 load
== image_data
) {
327 fdt_blob
= (char *)image_data
;
331 if ((load
< image_end
) && (load_end
> image_start
)) {
332 fdt_error("fdt overwritten");
336 debug(" Loading FDT from 0x%08lx to 0x%08lx\n",
339 memmove((void *)load
,
341 image_get_data_size(fdt_hdr
));
346 case IMAGE_FORMAT_FIT
:
348 * This case will catch both: new uImage format
349 * (libfdt based) and raw FDT blob (also libfdt
352 #if defined(CONFIG_FIT)
353 /* check FDT blob vs FIT blob */
354 if (fit_check_format(buf
)) {
357 fdt_noffset
= fit_image_load(images
,
358 fdt_addr
, &fit_uname_fdt
,
360 arch
, IH_TYPE_FLATDT
,
361 BOOTSTAGE_ID_FIT_FDT_START
,
362 FIT_LOAD_OPTIONAL
, &load
, &len
);
364 images
->fit_hdr_fdt
= map_sysmem(fdt_addr
, 0);
365 images
->fit_uname_fdt
= fit_uname_fdt
;
366 images
->fit_noffset_fdt
= fdt_noffset
;
375 debug("* fdt: raw FDT blob\n");
376 printf("## Flattened Device Tree blob at %08lx\n",
381 puts("ERROR: Did not find a cmdline Flattened Device Tree\n");
385 printf(" Booting using the fdt blob at %#08lx\n", fdt_addr
);
386 fdt_blob
= map_sysmem(fdt_addr
, 0);
387 } else if (images
->legacy_hdr_valid
&&
388 image_check_type(&images
->legacy_hdr_os_copy
,
390 ulong fdt_data
, fdt_len
;
393 * Now check if we have a legacy multi-component image,
394 * get second entry data start address and len.
396 printf("## Flattened Device Tree from multi component Image at %08lX\n",
397 (ulong
)images
->legacy_hdr_os
);
399 image_multi_getimg(images
->legacy_hdr_os
, 2, &fdt_data
,
402 fdt_blob
= (char *)fdt_data
;
403 printf(" Booting using the fdt at 0x%p\n", fdt_blob
);
405 if (fdt_check_header(fdt_blob
) != 0) {
406 fdt_error("image is not a fdt");
410 if (fdt_totalsize(fdt_blob
) != fdt_len
) {
411 fdt_error("fdt size != image size");
415 debug("## No Flattened Device Tree\n");
419 debug("## No Flattened Device Tree\n");
423 *of_flat_tree
= fdt_blob
;
424 *of_size
= fdt_totalsize(fdt_blob
);
425 debug(" of_flat_tree at 0x%08lx size 0x%08lx\n",
426 (ulong
)*of_flat_tree
, *of_size
);
431 *of_flat_tree
= NULL
;
437 * Verify the device tree.
439 * This function is called after all device tree fix-ups have been enacted,
440 * so that the final device tree can be verified. The definition of "verified"
441 * is up to the specific implementation. However, it generally means that the
442 * addresses of some of the devices in the device tree are compared with the
443 * actual addresses at which U-Boot has placed them.
445 * Returns 1 on success, 0 on failure. If 0 is returned, U-boot will halt the
448 __weak
int ft_verify_fdt(void *fdt
)
453 __weak
int arch_fixup_fdt(void *blob
)
458 int image_setup_libfdt(bootm_headers_t
*images
, void *blob
,
459 int of_size
, struct lmb
*lmb
)
461 ulong
*initrd_start
= &images
->initrd_start
;
462 ulong
*initrd_end
= &images
->initrd_end
;
466 if (fdt_chosen(blob
) < 0) {
467 printf("ERROR: /chosen node create failed\n");
470 if (arch_fixup_fdt(blob
) < 0) {
471 printf("ERROR: arch-specific fdt fixup failed\n");
474 if (IMAGE_OF_BOARD_SETUP
) {
475 fdt_ret
= ft_board_setup(blob
, gd
->bd
);
477 printf("ERROR: board-specific fdt fixup failed: %s\n",
478 fdt_strerror(fdt_ret
));
482 if (IMAGE_OF_SYSTEM_SETUP
) {
483 if (ft_system_setup(blob
, gd
->bd
)) {
484 printf("ERROR: system-specific fdt fixup failed: %s\n",
485 fdt_strerror(fdt_ret
));
489 fdt_fixup_ethernet(blob
);
491 /* Delete the old LMB reservation */
492 lmb_free(lmb
, (phys_addr_t
)(u32
)(uintptr_t)blob
,
493 (phys_size_t
)fdt_totalsize(blob
));
495 ret
= fdt_shrink_to_minimum(blob
);
500 if (*initrd_start
&& *initrd_end
) {
501 of_size
+= FDT_RAMDISK_OVERHEAD
;
502 fdt_set_totalsize(blob
, of_size
);
504 /* Create a new LMB reservation */
505 lmb_reserve(lmb
, (ulong
)blob
, of_size
);
507 fdt_initrd(blob
, *initrd_start
, *initrd_end
);
508 if (!ft_verify_fdt(blob
))
511 #if defined(CONFIG_SOC_KEYSTONE)
512 if (IMAGE_OF_BOARD_SETUP
)
513 ft_board_setup_ex(blob
, gd
->bd
);
518 printf(" - must RESET the board to recover.\n\n");