common/splash_source.c

   1 /*
   2  * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
   3  *
   4  * Authors: Igor Grinberg <grinberg@compulab.co.il>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <bmp_layout.h>
  11 #include <errno.h>
  12 #include <fs.h>
  13 #include <fdt_support.h>
  14 #include <image.h>
  15 #include <nand.h>
  16 #include <sata.h>
  17 #include <spi.h>
  18 #include <spi_flash.h>
  19 #include <splash.h>
  20 #include <usb.h>
  21
  22 DECLARE_GLOBAL_DATA_PTR;
  23
  24 #ifdef CONFIG_SPI_FLASH
  25 static struct spi_flash *sf;
  26 static int splash_sf_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
  27 {
  28         if (!sf) {
  29                 sf = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
  30                                      CONFIG_SF_DEFAULT_CS,
  31                                      CONFIG_SF_DEFAULT_SPEED,
  32                                      CONFIG_SF_DEFAULT_MODE);
  33                 if (!sf)
  34                         return -ENODEV;
  35         }
  36
  37         return spi_flash_read(sf, offset, read_size, (void *)bmp_load_addr);
  38 }
  39 #else
  40 static int splash_sf_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
  41 {
  42         debug("%s: sf support not available\n", __func__);
  43         return -ENOSYS;
  44 }
  45 #endif
  46
  47 #ifdef CONFIG_CMD_NAND
  48 static int splash_nand_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
  49 {
  50         return nand_read_skip_bad(nand_info[nand_curr_device], offset,
  51                                   &read_size, NULL,
  52                                   nand_info[nand_curr_device]->size,
  53                                   (u_char *)bmp_load_addr);
  54 }
  55 #else
  56 static int splash_nand_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
  57 {
  58         debug("%s: nand support not available\n", __func__);
  59         return -ENOSYS;
  60 }
  61 #endif
  62
  63 static int splash_storage_read_raw(struct splash_location *location,
  64                                u32 bmp_load_addr, size_t read_size)
  65 {
  66         u32 offset;
  67
  68         if (!location)
  69                 return -EINVAL;
  70
  71         offset = location->offset;
  72         switch (location->storage) {
  73         case SPLASH_STORAGE_NAND:
  74                 return splash_nand_read_raw(bmp_load_addr, offset, read_size);
  75         case SPLASH_STORAGE_SF:
  76                 return splash_sf_read_raw(bmp_load_addr, offset, read_size);
  77         default:
  78                 printf("Unknown splash location\n");
  79         }
  80
  81         return -EINVAL;
  82 }
  83
  84 static int splash_load_raw(struct splash_location *location, u32 bmp_load_addr)
  85 {
  86         struct bmp_header *bmp_hdr;
  87         int res;
  88         size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
  89
  90         if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
  91                 goto splash_address_too_high;
  92
  93         res = splash_storage_read_raw(location, bmp_load_addr, bmp_header_size);
  94         if (res < 0)
  95                 return res;
  96
  97         bmp_hdr = (struct bmp_header *)bmp_load_addr;
  98         bmp_size = le32_to_cpu(bmp_hdr->file_size);
  99
 100         if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
 101                 goto splash_address_too_high;
 102
 103         return splash_storage_read_raw(location, bmp_load_addr, bmp_size);
 104
 105 splash_address_too_high:
 106         printf("Error: splashimage address too high. Data overwrites U-Boot and/or placed beyond DRAM boundaries.\n");
 107
 108         return -EFAULT;
 109 }
 110
 111 static int splash_select_fs_dev(struct splash_location *location)
 112 {
 113         int res;
 114
 115         switch (location->storage) {
 116         case SPLASH_STORAGE_MMC:
 117                 res = fs_set_blk_dev("mmc", location->devpart, FS_TYPE_ANY);
 118                 break;
 119         case SPLASH_STORAGE_USB:
 120                 res = fs_set_blk_dev("usb", location->devpart, FS_TYPE_ANY);
 121                 break;
 122         case SPLASH_STORAGE_SATA:
 123                 res = fs_set_blk_dev("sata", location->devpart, FS_TYPE_ANY);
 124                 break;
 125         case SPLASH_STORAGE_NAND:
 126                 if (location->ubivol != NULL)
 127                         res = fs_set_blk_dev("ubi", NULL, FS_TYPE_UBIFS);
 128                 else
 129                         res = -ENODEV;
 130                 break;
 131         default:
 132                 printf("Error: unsupported location storage.\n");
 133                 return -ENODEV;
 134         }
 135
 136         if (res)
 137                 printf("Error: could not access storage.\n");
 138
 139         return res;
 140 }
 141
 142 #ifdef CONFIG_USB_STORAGE
 143 static int splash_init_usb(void)
 144 {
 145         int err;
 146
 147         err = usb_init();
 148         if (err)
 149                 return err;
 150
 151 #ifndef CONFIG_DM_USB
 152         err = usb_stor_scan(1) < 0 ? -ENODEV : 0;
 153 #endif
 154
 155         return err;
 156 }
 157 #else
 158 static inline int splash_init_usb(void)
 159 {
 160         printf("Cannot load splash image: no USB support\n");
 161         return -ENOSYS;
 162 }
 163 #endif
 164
 165 #ifdef CONFIG_CMD_SATA
 166 static int splash_init_sata(void)
 167 {
 168         return sata_initialize();
 169 }
 170 #else
 171 static inline int splash_init_sata(void)
 172 {
 173         printf("Cannot load splash image: no SATA support\n");
 174         return -ENOSYS;
 175 }
 176 #endif
 177
 178 #ifdef CONFIG_CMD_UBIFS
 179 static int splash_mount_ubifs(struct splash_location *location)
 180 {
 181         int res;
 182         char cmd[32];
 183
 184         sprintf(cmd, "ubi part %s", location->mtdpart);
 185         res = run_command(cmd, 0);
 186         if (res)
 187                 return res;
 188
 189         sprintf(cmd, "ubifsmount %s", location->ubivol);
 190         res = run_command(cmd, 0);
 191
 192         return res;
 193 }
 194
 195 static inline int splash_umount_ubifs(void)
 196 {
 197         return run_command("ubifsumount", 0);
 198 }
 199 #else
 200 static inline int splash_mount_ubifs(struct splash_location *location)
 201 {
 202         printf("Cannot load splash image: no UBIFS support\n");
 203         return -ENOSYS;
 204 }
 205
 206 static inline int splash_umount_ubifs(void)
 207 {
 208         printf("Cannot unmount UBIFS: no UBIFS support\n");
 209         return -ENOSYS;
 210 }
 211 #endif
 212
 213 #define SPLASH_SOURCE_DEFAULT_FILE_NAME         "splash.bmp"
 214
 215 static int splash_load_fs(struct splash_location *location, u32 bmp_load_addr)
 216 {
 217         int res = 0;
 218         loff_t bmp_size;
 219         loff_t actread;
 220         char *splash_file;
 221
 222         splash_file = getenv("splashfile");
 223         if (!splash_file)
 224                 splash_file = SPLASH_SOURCE_DEFAULT_FILE_NAME;
 225
 226         if (location->storage == SPLASH_STORAGE_USB)
 227                 res = splash_init_usb();
 228
 229         if (location->storage == SPLASH_STORAGE_SATA)
 230                 res = splash_init_sata();
 231
 232         if (location->ubivol != NULL)
 233                 res = splash_mount_ubifs(location);
 234
 235         if (res)
 236                 return res;
 237
 238         res = splash_select_fs_dev(location);
 239         if (res)
 240                 goto out;
 241
 242         res = fs_size(splash_file, &bmp_size);
 243         if (res) {
 244                 printf("Error (%d): cannot determine file size\n", res);
 245                 goto out;
 246         }
 247
 248         if (bmp_load_addr + bmp_size >= gd->start_addr_sp) {
 249                 printf("Error: splashimage address too high. Data overwrites U-Boot and/or placed beyond DRAM boundaries.\n");
 250                 res = -EFAULT;
 251                 goto out;
 252         }
 253
 254         splash_select_fs_dev(location);
 255         res = fs_read(splash_file, bmp_load_addr, 0, 0, &actread);
 256
 257 out:
 258         if (location->ubivol != NULL)
 259                 splash_umount_ubifs();
 260
 261         return res;
 262 }
 263
 264 /**
 265  * select_splash_location - return the splash location based on board support
 266  *                          and env variable "splashsource".
 267  *
 268  * @locations:          An array of supported splash locations.
 269  * @size:               Size of splash_locations array.
 270  *
 271  * @return: If a null set of splash locations is given, or
 272  *          splashsource env variable is set to unsupported value
 273  *                      return NULL.
 274  *          If splashsource env variable is not defined
 275  *                      return the first entry in splash_locations as default.
 276  *          If splashsource env variable contains a supported value
 277  *                      return the location selected by splashsource.
 278  */
 279 static struct splash_location *select_splash_location(
 280                             struct splash_location *locations, uint size)
 281 {
 282         int i;
 283         char *env_splashsource;
 284
 285         if (!locations || size == 0)
 286                 return NULL;
 287
 288         env_splashsource = getenv("splashsource");
 289         if (env_splashsource == NULL)
 290                 return &locations[0];
 291
 292         for (i = 0; i < size; i++) {
 293                 if (!strcmp(locations[i].name, env_splashsource))
 294                         return &locations[i];
 295         }
 296
 297         printf("splashsource env variable set to unsupported value\n");
 298         return NULL;
 299 }
 300
 301 #ifdef CONFIG_FIT
 302 static int splash_load_fit(struct splash_location *location, u32 bmp_load_addr)
 303 {
 304         int res;
 305         int node_offset;
 306         int splash_offset;
 307         int splash_size;
 308         struct image_header *img_header;
 309         const u32 *fit_header;
 310         u32 fit_size;
 311         const size_t header_size = sizeof(struct image_header);
 312
 313         /* Read in image header */
 314         res = splash_storage_read_raw(location, bmp_load_addr, header_size);
 315         if (res < 0)
 316                 return res;
 317
 318         img_header = (struct image_header *)bmp_load_addr;
 319         fit_size = fdt_totalsize(img_header);
 320
 321         /* Read in entire FIT */
 322         fit_header = (const u32 *)(bmp_load_addr + header_size);
 323         res = splash_storage_read_raw(location, (u32)fit_header, fit_size);
 324         if (res < 0)
 325                 return res;
 326
 327         res = fit_check_format(fit_header);
 328         if (!res) {
 329                 debug("Could not find valid FIT image\n");
 330                 return -EINVAL;
 331         }
 332
 333         node_offset = fit_image_get_node(fit_header, location->name);
 334         if (node_offset < 0) {
 335                 debug("Could not find splash image '%s' in FIT\n",
 336                       location->name);
 337                 return -ENOENT;
 338         }
 339
 340         res = fit_image_get_data_offset(fit_header, node_offset,
 341                                         &splash_offset);
 342         if (res < 0) {
 343                 printf("Failed to load splash image (err=%d)\n", res);
 344                 return res;
 345         }
 346
 347         res = fit_image_get_data_size(fit_header, node_offset, &splash_size);
 348         if (res < 0) {
 349                 printf("Failed to load splash image (err=%d)\n", res);
 350                 return res;
 351         }
 352
 353         /* Align data offset to 4-byte boundrary */
 354         fit_size = fdt_totalsize(fit_header);
 355         fit_size = (fit_size + 3) & ~3;
 356
 357         /* Read in the splash data */
 358         location->offset = (location->offset + fit_size + splash_offset);
 359         res = splash_storage_read_raw(location, bmp_load_addr , splash_size);
 360         if (res < 0)
 361                 return res;
 362
 363         return 0;
 364 }
 365 #endif /* CONFIG_FIT */
 366
 367 /**
 368  * splash_source_load - load splash image from a supported location.
 369  *
 370  * Select a splash image location based on the value of splashsource environment
 371  * variable and the board supported splash source locations, and load a
 372  * splashimage to the address pointed to by splashimage environment variable.
 373  *
 374  * @locations:          An array of supported splash locations.
 375  * @size:               Size of splash_locations array.
 376  *
 377  * @return: 0 on success, negative value on failure.
 378  */
 379 int splash_source_load(struct splash_location *locations, uint size)
 380 {
 381         struct splash_location *splash_location;
 382         char *env_splashimage_value;
 383         u32 bmp_load_addr;
 384
 385         env_splashimage_value = getenv("splashimage");
 386         if (env_splashimage_value == NULL)
 387                 return -ENOENT;
 388
 389         bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
 390         if (bmp_load_addr == 0) {
 391                 printf("Error: bad splashimage address specified\n");
 392                 return -EFAULT;
 393         }
 394
 395         splash_location = select_splash_location(locations, size);
 396         if (!splash_location)
 397                 return -EINVAL;
 398
 399         if (splash_location->flags == SPLASH_STORAGE_RAW)
 400                 return splash_load_raw(splash_location, bmp_load_addr);
 401         else if (splash_location->flags == SPLASH_STORAGE_FS)
 402                 return splash_load_fs(splash_location, bmp_load_addr);
 403 #ifdef CONFIG_FIT
 404         else if (splash_location->flags == SPLASH_STORAGE_FIT)
 405                 return splash_load_fit(splash_location, bmp_load_addr);
 406 #endif
 407         return -EINVAL;
 408 }