configs/at91sam9m10g45ek_nandflash_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_AT91=y
   3 CONFIG_TARGET_AT91SAM9M10G45EK=y
   4 CONFIG_SYS_MALLOC_F_LEN=0x2000
   5 CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
   6 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH"
   7 CONFIG_BOOTDELAY=3
   8 # CONFIG_CONSOLE_MUX is not set
   9 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  10 # CONFIG_DISPLAY_BOARDINFO is not set
  11 CONFIG_HUSH_PARSER=y
  12 CONFIG_SYS_PROMPT="U-Boot> "
  13 # CONFIG_CMD_BDI is not set
  14 CONFIG_CMD_BOOTZ=y
  15 # CONFIG_CMD_IMI is not set
  16 # CONFIG_CMD_IMLS is not set
  17 # CONFIG_CMD_LOADS is not set
  18 # CONFIG_CMD_FLASH is not set
  19 CONFIG_CMD_MMC=y
  20 CONFIG_CMD_USB=y
  21 # CONFIG_CMD_FPGA is not set
  22 # CONFIG_CMD_SETEXPR is not set
  23 CONFIG_CMD_DHCP=y
  24 CONFIG_CMD_PING=y
  25 CONFIG_CMD_FAT=y
  26 CONFIG_OF_CONTROL=y
  27 CONFIG_DM=y
  28 CONFIG_CLK=y
  29 CONFIG_CLK_AT91=y
  30 CONFIG_AT91_UTMI=y
  31 CONFIG_DM_GPIO=y
  32 CONFIG_AT91_GPIO=y
  33 CONFIG_DM_MMC=y
  34 CONFIG_GENERIC_ATMEL_MCI=y
  35 CONFIG_DM_ETH=y
  36 CONFIG_MACB=y
  37 CONFIG_PINCTRL=y
  38 CONFIG_PINCTRL_AT91=y
  39 CONFIG_DM_SERIAL=y
  40 CONFIG_DEBUG_UART=y
  41 CONFIG_DEBUG_UART_ATMEL=y
  42 CONFIG_DEBUG_UART_BASE=0xffffee00
  43 CONFIG_DEBUG_UART_CLOCK=132000000
  44 CONFIG_DEBUG_UART_BOARD_INIT=y
  45 CONFIG_DEBUG_UART_ANNOUNCE=y
  46 CONFIG_ATMEL_USART=y
  47 CONFIG_USB=y
  48 CONFIG_DM_USB=y
  49 CONFIG_USB_EHCI_HCD=y
  50 CONFIG_USB_STORAGE=y
  51 CONFIG_LCD=y