configs/ga10h_v1_1_defconfig

   1 # The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand,
   2 # sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot.
   3 #
   4 # This defconfig is for the v1.1 pcb with an a33 soc.
   5 CONFIG_SPL=y
   6 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
   7 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600"
   8 CONFIG_USB_MUSB_SUNXI=y
   9 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
  10 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
  11 CONFIG_AXP_GPIO=y
  12 CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0"
  13 CONFIG_VIDEO_LCD_PANEL_LVDS=y
  14 CONFIG_VIDEO_LCD_DCLK_PHASE=0
  15 CONFIG_VIDEO_LCD_POWER="PH7"
  16 CONFIG_VIDEO_LCD_BL_EN="PH6"
  17 CONFIG_VIDEO_LCD_BL_PWM="PH0"
  18 #CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n
  19 CONFIG_ARM=y
  20 CONFIG_ARCH_SUNXI=y
  21 CONFIG_MACH_SUN8I_A33=y
  22 CONFIG_DRAM_CLK=432
  23 # zq = 0x3bbb
  24 CONFIG_DRAM_ZQ=15291
  25 CONFIG_DRAM_ODT_EN=y
  26 # Wifi power
  27 CONFIG_AXP221_DLDO1_VOLT=3300
  28 # aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP
  29 CONFIG_AXP221_ALDO1_VOLT=3000