configs/phycore-rk3288_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_ROCKCHIP=y
   3 CONFIG_SYS_MALLOC_F_LEN=0x2000
   4 CONFIG_ROCKCHIP_RK3288=y
   5 CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y
   6 CONFIG_TARGET_PHYCORE_RK3288=y
   7 CONFIG_SPL_STACK_R_ADDR=0x80000
   8 CONFIG_DEFAULT_DEVICE_TREE="rk3288-phycore-rdk"
   9 CONFIG_DEBUG_UART=y
  10 CONFIG_SILENT_CONSOLE=y
  11 CONFIG_CONSOLE_MUX=y
  12 # CONFIG_DISPLAY_CPUINFO is not set
  13 CONFIG_SPL_STACK_R=y
  14 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
  15 CONFIG_SPL_I2C_SUPPORT=y
  16 CONFIG_SPL_POWER_SUPPORT=y
  17 # CONFIG_CMD_IMLS is not set
  18 CONFIG_CMD_GPT=y
  19 CONFIG_CMD_MMC=y
  20 CONFIG_CMD_SF=y
  21 CONFIG_CMD_SPI=y
  22 CONFIG_CMD_I2C=y
  23 CONFIG_CMD_USB=y
  24 CONFIG_CMD_GPIO=y
  25 # CONFIG_CMD_SETEXPR is not set
  26 CONFIG_CMD_CACHE=y
  27 CONFIG_CMD_TIME=y
  28 CONFIG_CMD_PMIC=y
  29 CONFIG_CMD_REGULATOR=y
  30 # CONFIG_SPL_DOS_PARTITION is not set
  31 # CONFIG_SPL_ISO_PARTITION is not set
  32 # CONFIG_SPL_EFI_PARTITION is not set
  33 CONFIG_SPL_PARTITION_UUIDS=y
  34 CONFIG_SPL_OF_CONTROL=y
  35 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
  36 CONFIG_REGMAP=y
  37 CONFIG_SPL_REGMAP=y
  38 CONFIG_SYSCON=y
  39 CONFIG_SPL_SYSCON=y
  40 # CONFIG_SPL_SIMPLE_BUS is not set
  41 CONFIG_CLK=y
  42 CONFIG_SPL_CLK=y
  43 CONFIG_ROCKCHIP_GPIO=y
  44 CONFIG_SYS_I2C_ROCKCHIP=y
  45 CONFIG_MMC_DW=y
  46 CONFIG_MMC_DW_ROCKCHIP=y
  47 CONFIG_DM_ETH=y
  48 CONFIG_ETH_DESIGNWARE=y
  49 CONFIG_GMAC_ROCKCHIP=y
  50 CONFIG_PINCTRL=y
  51 CONFIG_SPL_PINCTRL=y
  52 # CONFIG_SPL_PINCTRL_FULL is not set
  53 CONFIG_PINCTRL_ROCKCHIP_RK3288=y
  54 CONFIG_DM_PMIC=y
  55 CONFIG_PMIC_RK8XX=y
  56 CONFIG_DM_REGULATOR_FIXED=y
  57 CONFIG_REGULATOR_RK8XX=y
  58 CONFIG_PWM_ROCKCHIP=y
  59 CONFIG_RAM=y
  60 CONFIG_SPL_RAM=y
  61 CONFIG_DEBUG_UART_BASE=0xff690000
  62 CONFIG_DEBUG_UART_CLOCK=24000000
  63 CONFIG_DEBUG_UART_SHIFT=2
  64 CONFIG_SYS_NS16550=y
  65 CONFIG_SYSRESET=y
  66 CONFIG_USB=y
  67 CONFIG_USB_STORAGE=y
  68 CONFIG_USE_TINY_PRINTF=y
  69 CONFIG_CMD_DHRYSTONE=y
  70 CONFIG_ERRNO_STR=y