configs/taurus_defconfig

   1 CONFIG_ARM=y
   2 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
   3 # CONFIG_SPL_USE_ARCH_MEMSET is not set
   4 CONFIG_ARCH_AT91=y
   5 CONFIG_TARGET_TAURUS=y
   6 CONFIG_SPL_GPIO_SUPPORT=y
   7 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   8 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   9 CONFIG_SPL_SERIAL_SUPPORT=y
  10 CONFIG_SPL_NAND_SUPPORT=y
  11 CONFIG_SPL_SPI_FLASH_SUPPORT=y
  12 CONFIG_SPL_SPI_SUPPORT=y
  13 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
  14 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS"
  15 CONFIG_BOOTDELAY=3
  16 # CONFIG_DISPLAY_BOARDINFO is not set
  17 CONFIG_BOARD_EARLY_INIT_F=y
  18 CONFIG_SPL=y
  19 CONFIG_HUSH_PARSER=y
  20 CONFIG_SYS_PROMPT="U-Boot> "
  21 # CONFIG_CMD_BDI is not set
  22 CONFIG_CMD_BOOTZ=y
  23 # CONFIG_CMD_IMI is not set
  24 # CONFIG_CMD_IMLS is not set
  25 # CONFIG_CMD_LOADS is not set
  26 CONFIG_CMD_SF=y
  27 CONFIG_CMD_SPI=y
  28 CONFIG_CMD_USB=y
  29 CONFIG_CMD_DFU=y
  30 # CONFIG_CMD_FPGA is not set
  31 # CONFIG_CMD_SOURCE is not set
  32 # CONFIG_CMD_SETEXPR is not set
  33 CONFIG_CMD_DHCP=y
  34 CONFIG_CMD_PING=y
  35 # CONFIG_DOS_PARTITION is not set
  36 CONFIG_OF_CONTROL=y
  37 CONFIG_OF_EMBED=y
  38 CONFIG_DFU_NAND=y
  39 # CONFIG_MMC is not set
  40 CONFIG_SPI_FLASH=y
  41 CONFIG_SPI_FLASH_STMICRO=y
  42 CONFIG_USB=y
  43 CONFIG_USB_STORAGE=y
  44 CONFIG_USB_GADGET=y
  45 CONFIG_USB_GADGET_DOWNLOAD=y
  46 CONFIG_G_DNL_MANUFACTURER="Siemens AG"
  47 CONFIG_G_DNL_VENDOR_NUM=0x0908
  48 CONFIG_G_DNL_PRODUCT_NUM=0x02d2
  49 CONFIG_USE_TINY_PRINTF=y