doc/README.lynxkdi

   1                            LYNX KDI SUPPORT
   2
   3                     Last Update: July 20, 2003
   4 =======================================================================
   5
   6 This file describes support for LynuxWorks KDI within U-Boot. Support
   7 is enabled by defining CONFIG_LYNXKDI.
   8
   9
  10 LYNXOS AND BLUECAT SUPPORTED
  11 ============================
  12 Both LynxOS and BlueCat linux KDIs are supported. The implementation
  13 automatically detects which is being booted. When you use mkimage
  14 you should specify "lynxos" for both (see target-specific notes).
  15
  16
  17 SUPPORTED ARCHITECTURE/TARGETS
  18 ==============================
  19 The following targets have been tested:
  20
  21 -PowerPC  MPC8260ADS
  22
  23
  24 FILES TO LOOK AT
  25 ================
  26 include/lynxkdi.h    -defines a simple struct passed to a kdi.
  27 common/lynxkdi.c     -implements the call to the kdi.
  28 common/cmd_bootm.c   -top-level command implementation ("bootm").
  29
  30
  31 ====================================================================
  32 TARGET SPECIFIC NOTES
  33 ====================================================================
  34
  35 MPC8260ADS
  36 ===========
  37 The default LynxOS and BlueCat implementations require some
  38 modifications to the config file.
  39
  40 Edit include/configs/MPC8260ADS.h to use the following:
  41
  42 #define CFG_IMMR        0xFA200000
  43 #define CFG_BCSR        0xFA100000
  44 #define CFG_BR1_PRELIM  0xFA101801
  45
  46 When creating a LynxOS or BlueCat u-boot image using mkimage,
  47 you must specify the following:
  48
  49 Both:    -A ppc -O lynxos -T kernel -C none
  50 LynxOS:  -a 0x00004000 -e 0x00004020
  51 BlueCat: -a 0x00500000 -e 0x00507000
  52
  53 To pass the MAC address to BlueCat you should define the
  54 "fcc2_ether_addr" parameter in the "bootargs" environment
  55 variable. E.g.:
  56
  57 ==> setenv bootargs fcc2_ether_addr=00:11:22:33:44:55:66