doc/README.m5475evb

   1 Freescale MCF5475EVB ColdFire Development Board
   2 ================================================
   3
   4 TsiChung Liew(Tsi-Chung.Liew@freescale.com)
   5 Created Jan 08, 2008
   6 ===========================================
   7
   8
   9 Changed files:
  10 ==============
  11
  12 - board/freescale/m547xevb/m547xevb.c   Dram setup, IDE pre init, and PCI init
  13 - board/freescale/m547xevb/mii.c        MII init
  14 - board/freescale/m547xevb/Makefile     Makefile
  15 - board/freescale/m547xevb/config.mk    config make
  16 - board/freescale/m547xevb/u-boot.lds   Linker description
  17
  18 - arch/m68k/cpu/mcf547x_8x/cpu.c                        cpu specific code
  19 - arch/m68k/cpu/mcf547x_8x/cpu_init.c           Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
  20 - arch/m68k/cpu/mcf547x_8x/interrupts.c         cpu specific interrupt support
  21 - arch/m68k/cpu/mcf547x_8x/slicetimer.c         Timer support
  22 - arch/m68k/cpu/mcf547x_8x/speed.c              system, pci, flexbus, and cpu clock
  23 - arch/m68k/cpu/mcf547x_8x/Makefile             Makefile
  24 - arch/m68k/cpu/mcf547x_8x/config.mk            config make
  25 - arch/m68k/cpu/mcf547x_8x/start.S              start up assembly code
  26
  27 - doc/README.m5475evb                   This readme file
  28
  29 - drivers/dma/MCD_dmaApi.c              DMA API functions
  30 - drivers/dma/MCD_tasks.c               DMA Tasks
  31 - drivers/dma/MCD_tasksInit.c           DMA Tasks Init
  32 - drivers/net/fsl_mcdmafec.c            ColdFire common DMA FEC driver
  33 - drivers/serial/mcfuart.c              ColdFire common UART driver
  34
  35 - include/MCD_dma.h                     DMA header file
  36 - include/MCD_progCheck.h               DMA header file
  37 - include/MCD_tasksInit.h               DMA header file
  38 - include/asm-m68k/bitops.h             Bit operation function export
  39 - include/asm-m68k/byteorder.h          Byte order functions
  40 - include/asm-m68k/errno.h              Error Number definition
  41 - include/asm-m68k/fec.h                FEC structure and definition
  42 - include/asm-m68k/fsl_i2c.h            I2C structure and definition
  43 - include/asm-m68k/fsl_mcddmafec.h      DMA FEC structure and definition
  44 - include/asm-m68k/global_data.h        Global data structure
  45 - include/asm-m68k/immap.h              ColdFire specific header file and driver macros
  46 - include/asm-m68k/immap_547x_8x.h      mcf547x_8x specific header file
  47 - include/asm-m68k/io.h                 io functions
  48 - include/asm-m68k/m547x_8x.h           mcf547x_8x specific header file
  49 - include/asm-m68k/posix_types.h        Posix
  50 - include/asm-m68k/processor.h          header file
  51 - include/asm-m68k/ptrace.h             Exception structure
  52 - include/asm-m68k/rtc.h                Realtime clock header file
  53 - include/asm-m68k/string.h             String function export
  54 - include/asm-m68k/timer.h              Timer structure and definition
  55 - include/asm-m68k/types.h              Data types definition
  56 - include/asm-m68k/uart.h               Uart structure and definition
  57 - include/asm-m68k/u-boot.h             u-boot structure
  58
  59 - include/configs/M5475EVB.h            Board specific configuration file
  60
  61 - arch/m68k/lib/board.c                 board init function
  62 - arch/m68k/lib/cache.c
  63 - arch/m68k/lib/interrupts                      Coldfire common interrupt functions
  64 - arch/m68k/lib/m68k_linux.c
  65 - arch/m68k/lib/traps.c                 Exception init code
  66
  67 1 MCF547x specific Options/Settings
  68 ====================================
  69 1.1 pre-loader is no longer suppoer in thie coldfire family
  70
  71 1.2 Configuration settings for M5475EVB Development Board
  72 CONFIG_MCF547x_8x       -- define for all MCF547x_8x CPUs
  73 CONFIG_M547x            -- define for all Freescale MCF547x CPUs
  74 CONFIG_M5475            -- define for M5475EVB board
  75
  76 CONFIG_MCFUART          -- define to use common CF Uart driver
  77 CONFIG_SYS_UART_PORT            -- define UART port number, start with 0, 1 and 2
  78 CONFIG_BAUDRATE         -- define UART baudrate
  79
  80 CONFIG_FSLDMAFEC        -- define to use common dma FEC driver
  81 CONFIG_NET_MULTI        -- define to use multi FEC in u-boot
  82 CONFIG_MII              -- enable to use MII driver
  83 CONFIG_CF_DOMII         -- enable to use MII feature in cmd_mii.c
  84 CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
  85 CONFIG_SYS_RX_ETH_BUFFER        -- Set FEC Receive buffer
  86 CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
  87 CONFIG_SYS_FEC0_PINMUX          -- Set FEC0 Pin configuration
  88 CONFIG_SYS_FEC1_PINMUX          -- Set FEC1 Pin configuration
  89 CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
  90 CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register
  91 MCFFEC_TOUT_LOOP        -- set FEC timeout loop
  92 CONFIG_HAS_ETH1         -- define to enable second FEC in u-boot
  93
  94 CONFIG_CMD_USB          -- enable USB commands
  95 CONFIG_USB_OHCI_NEW     -- enable USB OHCI driver
  96 CONFIG_USB_STORAGE      -- enable USB Storage device
  97 CONFIG_DOS_PARTITION    -- enable DOS read/write
  98
  99 CONFIG_SLTTMR           -- define to use SLT timer
 100
 101 CONFIG_FSL_I2C          -- define to use FSL common I2C driver
 102 CONFIG_HARD_I2C         -- define for I2C hardware support
 103 CONFIG_SOFT_I2C         -- define for I2C bit-banged
 104 CONFIG_SYS_I2C_SPEED            -- define for I2C speed
 105 CONFIG_SYS_I2C_SLAVE            -- define for I2C slave address
 106 CONFIG_SYS_I2C_OFFSET           -- define for I2C base address offset
 107 CONFIG_SYS_IMMR         -- define for MBAR offset
 108
 109 CONFIG_PCI              -- define for PCI support
 110 CONFIG_PCI_PNP          -- define for Plug n play support
 111 CONFIG_SKIPPCI_HOSTBRIDGE       -- SKIP PCI Host bridge
 112 CONFIG_SYS_PCI_MEM_BUS          -- PCI memory logical offset
 113 CONFIG_SYS_PCI_MEM_PHYS -- PCI memory physical offset
 114 CONFIG_SYS_PCI_MEM_SIZE -- PCI memory size
 115 CONFIG_SYS_PCI_IO_BUS           -- PCI IO logical offset
 116 CONFIG_SYS_PCI_IO_PHYS          -- PCI IO physical offset
 117 CONFIG_SYS_PCI_IO_SIZE          -- PCI IO size
 118 CONFIG_SYS_PCI_CFG_BUS          -- PCI Configuration logical offset
 119 CONFIG_SYS_PCI_CFG_PHYS -- PCI Configuration physical offset
 120 CONFIG_SYS_PCI_CFG_SIZE -- PCI Configuration size
 121
 122 CONFIG_SYS_MBAR         -- define MBAR offset
 123
 124 CONFIG_MONITOR_IS_IN_RAM -- Not support
 125
 126 CONFIG_SYS_INIT_RAM_ADDR        -- defines the base address of the MCF547x internal SRAM
 127
 128 CONFIG_SYS_CSn_BASE     -- defines the Chip Select Base register
 129 CONFIG_SYS_CSn_MASK     -- defines the Chip Select Mask register
 130 CONFIG_SYS_CSn_CTRL     -- defines the Chip Select Control register
 131
 132 CONFIG_SYS_SDRAM_BASE   -- defines the DRAM Base
 133
 134 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
 135 ===========================================
 136 2.1. System memory map:
 137         Flash:          0xFF800000-0xFFFFFFFF (8MB)
 138         DDR:            0x00000000-0x3FFFFFFF (1024MB)
 139         SRAM:           0xF2000000-0xF2000FFF (4KB)
 140         PCI:            0x70000000-0x8FFFFFFF (512MB)
 141         IP:             0xF0000000-0xFFFFFFFF (256MB)
 142
 143 3. COMPILATION
 144 ==============
 145 3.1     To create U-Boot the gcc-4.x compiler set (ColdFire ELF or uclinux
 146         version) from codesourcery.com was used. Download it from:
 147         http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
 148
 149 3.2 Compilation
 150    export CROSS_COMPILE=cross-compile-prefix
 151    cd u-boot-1.x.x
 152    make distclean
 153    make M5475AFE_config, or     - boot 2MB, RAM 64MB
 154    make M5475BFE_config, or     - boot 2MB, code 16MB, RAM 64MB
 155    make M5475CFE_config, or     - boot 2MB, code 16MB, Video, USB, RAM 64MB
 156    make M5475DFE_config, or     - boot 2MB, USB, RAM 64MB
 157    make M5475EFE_config, or     - boot 2MB, Video, USB, RAM 64MB
 158    make M5475FFE_config, or     - boot 2MB, code 32MB, Video, USB, RAM 128MB
 159    make M5475GFE_config, or     - boot 2MB, RAM 64MB
 160    make
 161
 162 5. SCREEN DUMP
 163 ==============
 164 5.1
 165
 166 U-Boot 1.3.1 (Jan  8 2008 - 12:47:44)
 167
 168 CPU:   Freescale MCF5475
 169        CPU CLK 266 Mhz BUS CLK 133 Mhz
 170 Board: Freescale FireEngine 5475 EVB
 171 I2C:   ready
 172 DRAM:  64 MB
 173 FLASH: 18 MB
 174 In:    serial
 175 Out:   serial
 176 Err:   serial
 177 Net:   FEC0, FEC1
 178 -> pri
 179 bootdelay=1
 180 baudrate=115200
 181 ethaddr=00:e0:0c:bc:e5:60
 182 eth1addr=00:e0:0c:bc:e5:61
 183 ipaddr=192.162.1.2
 184 serverip=192.162.1.1
 185 gatewayip=192.162.1.1
 186 netmask=255.255.255.0
 187 hostname=M547xEVB
 188 netdev=eth0
 189 loadaddr=10000
 190 u-boot=u-boot.bin
 191 load=tftp ${loadaddr) ${u-boot}
 192 upd=run load; run prog
 193 prog=prot off bank 1;era ff800000 ff82ffff;cp.b ${loadaddr} ff800000 ${filesize};save
 194 stdin=serial
 195 stdout=serial
 196 stderr=serial
 197 ethact=FEC0
 198 mem=65024k
 199
 200 Environment size: 433/8188 bytes
 201 -> bdin
 202 memstart    = 0x00000000
 203 memsize     = 0x04000000
 204 flashstart  = 0xFF800000
 205 flashsize   = 0x01200000
 206 flashoffset = 0x00000000
 207 sramstart   = 0xF2000000
 208 sramsize    = 0x00001000
 209 mbar        = 0xF0000000
 210 busfreq     = 133.333 MHz
 211 pcifreq     =      0 MHz
 212 ethaddr     = 00:E0:0C:BC:E5:60
 213 eth1addr    = 00:E0:0C:BC:E5:61
 214 ip_addr     = 192.162.1.2
 215 baudrate    = 115200 bps
 216 -> ?
 217 ?       - alias for 'help'
 218 base    - print or set address offset
 219 bdinfo  - print Board Info structure
 220 boot    - boot default, i.e., run 'bootcmd'
 221 bootd   - boot default, i.e., run 'bootcmd'
 222 bootelf - Boot from an ELF image in memory
 223 bootm   - boot application image from memory
 224 bootp   - boot image via network using BootP/TFTP protocol
 225 bootvx  - Boot vxWorks from an ELF image
 226 cmp     - memory compare
 227 coninfo - print console devices and information
 228 cp      - memory copy
 229 crc32   - checksum calculation
 230 dcache  - enable or disable data cache
 231 echo    - echo args to console
 232 erase   - erase FLASH memory
 233 flinfo  - print FLASH memory information
 234 go      - start application at address 'addr'
 235 help    - print online help
 236 i2c     - I2C sub-system
 237 icache  - enable or disable instruction cache
 238 iminfo  - print header information for application image
 239 imls    - list all images found in flash
 240 itest   - return true/false on integer compare
 241 loadb   - load binary file over serial line (kermit mode)
 242 loads   - load S-Record file over serial line
 243 loady   - load binary file over serial line (ymodem mode)
 244 loop    - infinite loop on address range
 245 md      - memory display
 246 mii     - MII utility commands
 247 mm      - memory modify (auto-incrementing)
 248 mtest   - simple RAM test
 249 mw      - memory write (fill)
 250 nfs     - boot image via network using NFS protocol
 251 nm      - memory modify (constant address)
 252 pci     - list and access PCI Configuration Space
 253 ping    - send ICMP ECHO_REQUEST to network host
 254 printenv- print environment variables
 255 protect - enable or disable FLASH write protection
 256 rarpboot- boot image via network using RARP/TFTP protocol
 257 reset   - Perform RESET of the CPU
 258 run     - run commands in an environment variable
 259 saveenv - save environment variables to persistent storage
 260 setenv  - set environment variables
 261 sleep   - delay execution for some time
 262 source  - run script from memory
 263 tftpboot- boot image via network using TFTP protocol
 264 usb     - USB sub-system
 265 usbboot - boot from USB device
 266 version - print monitor version
 267 -> usb start
 268 (Re)start USB...
 269 USB:   OHCI pci controller (1131, 1561) found @(0:17:0)
 270 OHCI regs address 0x80000000
 271 scanning bus for devices... 2 USB Device(s) found
 272        scanning bus for storage devices... 1 Storage Device(s) found
 273 ->