doc/uImage.FIT/multi_spl.its

   1 /dts-v1/;
   2
   3 /*
   4  * (Bogus) example FIT image description file demonstrating the usage
   5  * of multiple images loaded by the SPL.
   6  * Several binaries will be loaded at their respective load addresses.
   7  *
   8  * For booting U-Boot, "firmware" is searched first. If not found, "loadables"
   9  * is used to identify images to be loaded into memory. If falcon boot is
  10  * enabled, "kernel" is searched first. If not found, it falls back to the
  11  * same flow as booting U-Boot. Changing image type will result skipping
  12  * specific image.
  13  *
  14  * Finally the one image specifying an entry point will be entered by the SPL.
  15  */
  16
  17 / {
  18         description = "multiple firmware blobs and U-Boot, loaded by SPL";
  19         #address-cells = <0x1>;
  20
  21         images {
  22
  23                 uboot {
  24                         description = "U-Boot (64-bit)";
  25                         type = "standalone";
  26                         arch = "arm64";
  27                         compression = "none";
  28                         load = <0x4a000000>;
  29                 };
  30
  31                 atf {
  32                         description = "ARM Trusted Firmware";
  33                         type = "firmware";
  34                         arch = "arm64";
  35                         compression = "none";
  36                         load = <0x18000>;
  37                         entry = <0x18000>;
  38                 };
  39
  40                 mgmt-firmware {
  41                         description = "arisc management processor firmware";
  42                         type = "firmware";
  43                         arch = "or1k";
  44                         compression = "none";
  45                         load = <0x40000>;
  46                 };
  47
  48                 fdt-1 {
  49                         description = "Pine64+ DT";
  50                         type = "flat_dt";
  51                         compression = "none";
  52                         load = <0x4fa00000>;
  53                         arch = "arm64";
  54                 };
  55
  56                 fdt-2 {
  57                         description = "Pine64 DT";
  58                         type = "flat_dt";
  59                         compression = "none";
  60                         load = <0x4fa00000>;
  61                         arch = "arm64";
  62                 };
  63
  64                 kernel {
  65                         description = "4.7-rc5 kernel";
  66                         type = "kernel";
  67                         compression = "none";
  68                         load = <0x40080000>;
  69                         arch = "arm64";
  70                 };
  71
  72                 initrd {
  73                         description = "Debian installer initrd";
  74                         type = "ramdisk";
  75                         compression = "none";
  76                         load = <0x4fe00000>;
  77                         arch = "arm64";
  78                 };
  79         };
  80
  81         configurations {
  82                 default = "config-1";
  83
  84                 config-1 {
  85                         description = "sun50i-a64-pine64-plus";
  86                         loadables = "uboot", "atf", "kernel", "initrd";
  87                         fdt = "fdt-1";
  88                 };
  89
  90                 config-2 {
  91                         description = "sun50i-a64-pine64";
  92                         loadables = "uboot", "atf", "mgmt-firmware";
  93                         fdt = "fdt-2";
  94                 };
  95         };
  96 };