drivers/Makefile

   1 #
   2 # SPDX-License-Identifier:      GPL-2.0+
   3 #
   4
   5 obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
   6 obj-$(CONFIG_$(SPL_TPL_)DM) += core/
   7 obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
   8 obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
   9 obj-$(CONFIG_$(SPL_TPL_)LED) += led/
  10 obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
  11 obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/
  12 obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
  13 obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
  14 obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
  15 obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
  16 obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/
  17 obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
  18 obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
  19
  20 ifndef CONFIG_TPL_BUILD
  21 ifdef CONFIG_SPL_BUILD
  22
  23 obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
  24 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
  25 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
  26 obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
  27 obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
  28 obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
  29 obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
  30 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
  31 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
  32 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
  33 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
  34 obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
  35 obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
  36 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
  37 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
  38 obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
  39 obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/
  40 obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/
  41 obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/
  42 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
  43 obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
  44 obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
  45 obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
  46 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
  47 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
  48 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
  49 obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
  50 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
  51 obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
  52 obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
  53 obj-$(CONFIG_SPL_THERMAL) += thermal/
  54
  55 endif
  56 endif
  57
  58 ifdef CONFIG_TPL_BUILD
  59
  60 obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
  61
  62 endif
  63
  64 ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
  65
  66 obj-y += adc/
  67 obj-y += ata/
  68 obj-$(CONFIG_DM_DEMO) += demo/
  69 obj-$(CONFIG_BIOSEMU) += bios_emulator/
  70 obj-y += block/
  71 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
  72 obj-$(CONFIG_CPU) += cpu/
  73 obj-y += crypto/
  74 obj-y += firmware/
  75 obj-$(CONFIG_FPGA) += fpga/
  76 obj-y += misc/
  77 obj-$(CONFIG_MMC) += mmc/
  78 obj-$(CONFIG_NVME) += nvme/
  79 obj-y += pcmcia/
  80 obj-y += dfu/
  81 obj-$(CONFIG_X86) += pch/
  82 obj-y += phy/marvell/
  83 obj-y += rtc/
  84 obj-y += scsi/
  85 obj-y += sound/
  86 obj-y += spmi/
  87 obj-y += sysreset/
  88 obj-y += tpm/
  89 obj-y += video/
  90 obj-y += watchdog/
  91 obj-$(CONFIG_QE) += qe/
  92 obj-$(CONFIG_U_QE) += qe/
  93 obj-y += mailbox/
  94 obj-y += memory/
  95 obj-y += pwm/
  96 obj-y += reset/
  97 obj-y += input/
  98 # SOC specific infrastructure drivers.
  99 obj-y += soc/
 100 obj-$(CONFIG_REMOTEPROC) += remoteproc/
 101 obj-y += thermal/
 102
 103 obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
 104 endif