drivers/ata/Kconfig

   1 config AHCI
   2         bool "Support SATA controllers with driver model"
   3         depends on DM
   4         help
   5           This enables a uclass for disk controllers in U-Boot. Various driver
   6           types can use this, such as AHCI/SATA. It does not provide any standard
   7           operations at present. The block device interface has not been converted
   8           to driver model.
   9
  10 config SATA
  11         bool "Support SATA controllers"
  12         help
  13           This enables support for SATA (Serial Advanced Technology
  14           Attachment), a serial bus standard for connecting to hard drives and
  15           other storage devices.
  16
  17           SATA replaces PATA (originally just ATA), which stands for Parallel AT
  18           Attachment, where AT refers to an IBM AT (Advanced Technology)
  19           computer released in 1984.
  20
  21           See also CMD_SATA which provides command-line support.
  22
  23 config LIBATA
  24         bool
  25         help
  26           Select this to build and link the libata helper functions.
  27
  28 config SCSI_AHCI
  29         bool "Enable SCSI interface to SATA devices"
  30         select LIBATA
  31         help
  32           Enable this to allow interfacing SATA devices via the SCSI layer.
  33
  34 menu "SATA/SCSI device support"
  35
  36 config AHCI_PCI
  37         bool "Support for PCI-based AHCI controller"
  38         depends on DM_SCSI
  39         help
  40           Enables support for the PCI-based AHCI controller.
  41
  42 config SATA_CEVA
  43         bool "Ceva Sata controller"
  44         depends on AHCI
  45         depends on DM_SCSI
  46         help
  47           This option enables Ceva Sata controller hard IP available on Xilinx
  48           ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and
  49           AHCI 1.3 specifications with hot-plug detect feature.
  50
  51
  52 config DWC_AHCI
  53         bool "Enable Synopsys DWC AHCI driver support"
  54         select SCSI_AHCI
  55         select PHY
  56         depends on DM_SCSI
  57         help
  58           Enable this driver to support Sata devices through
  59           Synopsys DWC AHCI module.
  60
  61 config DWC_AHSATA
  62         bool "Enable DWC AHSATA driver support"
  63         select LIBATA
  64         help
  65           Enable this driver to support the DWC AHSATA SATA controller found
  66           in i.MX5 and i.MX6 SoCs.
  67
  68 config FSL_SATA
  69         bool "Enable Freescale SATA controller driver support"
  70         select LIBATA
  71         help
  72           Enable this driver to support the SATA controller found in
  73           some Freescale PowerPC SoCs.
  74
  75 config SATA_MV
  76         bool "Enable Marvell SATA controller driver support"
  77         select LIBATA
  78         help
  79           Enable this driver to support the SATA controller found in
  80           some Marvell SoCs.
  81
  82 config SATA_SIL
  83         bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support"
  84         select LIBATA
  85         help
  86           Enable this driver to support the SIL3131, SIL3132 and SIL3124
  87           SATA controllers.
  88
  89 config SATA_SIL3114
  90         bool "Enable Silicon Image SIL3114 SATA driver support"
  91         select LIBATA
  92         help
  93           Enable this driver to support the SIL3114 SATA controllers.
  94
  95 endmenu