drivers/fpga/cyclon2.c

   1 /*
   2  * (C) Copyright 2006
   3  * Heiko Schocher, hs@denx.de
   4  * Based on ACE1XK.c
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>             /* core U-Boot definitions */
  10 #include <altera.h>
  11 #include <ACEX1K.h>             /* ACEX device family */
  12
  13 /* Define FPGA_DEBUG to get debug printf's */
  14 #ifdef  FPGA_DEBUG
  15 #define PRINTF(fmt,args...)     printf (fmt ,##args)
  16 #else
  17 #define PRINTF(fmt,args...)
  18 #endif
  19
  20 /* Note: The assumption is that we cannot possibly run fast enough to
  21  * overrun the device (the Slave Parallel mode can free run at 50MHz).
  22  * If there is a need to operate slower, define CONFIG_FPGA_DELAY in
  23  * the board config file to slow things down.
  24  */
  25 #ifndef CONFIG_FPGA_DELAY
  26 #define CONFIG_FPGA_DELAY()
  27 #endif
  28
  29 #ifndef CONFIG_SYS_FPGA_WAIT
  30 #define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/10           /* 100 ms */
  31 #endif
  32
  33 static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize);
  34 static int CYC2_ps_dump(Altera_desc *desc, const void *buf, size_t bsize);
  35 /* static int CYC2_ps_info( Altera_desc *desc ); */
  36
  37 /* ------------------------------------------------------------------------- */
  38 /* CYCLON2 Generic Implementation */
  39 int CYC2_load(Altera_desc *desc, const void *buf, size_t bsize)
  40 {
  41         int ret_val = FPGA_FAIL;
  42
  43         switch (desc->iface) {
  44         case passive_serial:
  45                 PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
  46                 ret_val = CYC2_ps_load (desc, buf, bsize);
  47                 break;
  48
  49         case fast_passive_parallel:
  50                 /* Fast Passive Parallel (FPP) and PS only differ in what is
  51                  * done in the write() callback. Use the existing PS load
  52                  * function for FPP, too.
  53                  */
  54                 PRINTF ("%s: Launching Fast Passive Parallel Loader\n",
  55                       __FUNCTION__);
  56                 ret_val = CYC2_ps_load(desc, buf, bsize);
  57                 break;
  58
  59                 /* Add new interface types here */
  60
  61         default:
  62                 printf ("%s: Unsupported interface type, %d\n",
  63                                 __FUNCTION__, desc->iface);
  64         }
  65
  66         return ret_val;
  67 }
  68
  69 int CYC2_dump(Altera_desc *desc, const void *buf, size_t bsize)
  70 {
  71         int ret_val = FPGA_FAIL;
  72
  73         switch (desc->iface) {
  74         case passive_serial:
  75                 PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
  76                 ret_val = CYC2_ps_dump (desc, buf, bsize);
  77                 break;
  78
  79                 /* Add new interface types here */
  80
  81         default:
  82                 printf ("%s: Unsupported interface type, %d\n",
  83                                 __FUNCTION__, desc->iface);
  84         }
  85
  86         return ret_val;
  87 }
  88
  89 int CYC2_info( Altera_desc *desc )
  90 {
  91         return FPGA_SUCCESS;
  92 }
  93
  94 /* ------------------------------------------------------------------------- */
  95 /* CYCLON2 Passive Serial Generic Implementation                                  */
  96 static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
  97 {
  98         int ret_val = FPGA_FAIL;        /* assume the worst */
  99         Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns;
 100         int     ret = 0;
 101
 102         PRINTF ("%s: start with interface functions @ 0x%p\n",
 103                         __FUNCTION__, fn);
 104
 105         if (fn) {
 106                 int cookie = desc->cookie;      /* make a local copy */
 107                 unsigned long ts;               /* timestamp */
 108
 109                 PRINTF ("%s: Function Table:\n"
 110                                 "ptr:\t0x%p\n"
 111                                 "struct: 0x%p\n"
 112                                 "config:\t0x%p\n"
 113                                 "status:\t0x%p\n"
 114                                 "write:\t0x%p\n"
 115                                 "done:\t0x%p\n\n",
 116                                 __FUNCTION__, &fn, fn, fn->config, fn->status,
 117                                 fn->write, fn->done);
 118 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 119                 printf ("Loading FPGA Device %d...", cookie);
 120 #endif
 121
 122                 /*
 123                  * Run the pre configuration function if there is one.
 124                  */
 125                 if (*fn->pre) {
 126                         (*fn->pre) (cookie);
 127                 }
 128
 129                 /* Establish the initial state */
 130                 (*fn->config) (false, true, cookie);    /* De-assert nCONFIG */
 131                 udelay(100);
 132                 (*fn->config) (true, true, cookie);     /* Assert nCONFIG */
 133
 134                 udelay(2);              /* T_cfg > 2us  */
 135
 136                 /* Wait for nSTATUS to be asserted */
 137                 ts = get_timer (0);             /* get current time */
 138                 do {
 139                         CONFIG_FPGA_DELAY ();
 140                         if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {    /* check the time */
 141                                 puts ("** Timeout waiting for STATUS to go high.\n");
 142                                 (*fn->abort) (cookie);
 143                                 return FPGA_FAIL;
 144                         }
 145                 } while (!(*fn->status) (cookie));
 146
 147                 /* Get ready for the burn */
 148                 CONFIG_FPGA_DELAY ();
 149
 150                 ret = (*fn->write) (buf, bsize, true, cookie);
 151                 if (ret) {
 152                         puts ("** Write failed.\n");
 153                         (*fn->abort) (cookie);
 154                         return FPGA_FAIL;
 155                 }
 156 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 157                 puts(" OK? ...");
 158 #endif
 159
 160                 CONFIG_FPGA_DELAY ();
 161
 162 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 163                 putc (' ');                     /* terminate the dotted line */
 164 #endif
 165
 166         /*
 167          * Checking FPGA's CONF_DONE signal - correctly booted ?
 168          */
 169
 170         if ( ! (*fn->done) (cookie) ) {
 171                 puts ("** Booting failed! CONF_DONE is still deasserted.\n");
 172                 (*fn->abort) (cookie);
 173                 return (FPGA_FAIL);
 174         }
 175 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 176         puts(" OK\n");
 177 #endif
 178
 179         ret_val = FPGA_SUCCESS;
 180
 181 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 182         if (ret_val == FPGA_SUCCESS) {
 183                 puts ("Done.\n");
 184         }
 185         else {
 186                 puts ("Fail.\n");
 187         }
 188 #endif
 189         (*fn->post) (cookie);
 190
 191         } else {
 192                 printf ("%s: NULL Interface function table!\n", __FUNCTION__);
 193         }
 194
 195         return ret_val;
 196 }
 197
 198 static int CYC2_ps_dump(Altera_desc *desc, const void *buf, size_t bsize)
 199 {
 200         /* Readback is only available through the Slave Parallel and         */
 201         /* boundary-scan interfaces.                                         */
 202         printf ("%s: Passive Serial Dumping is unavailable\n",
 203                         __FUNCTION__);
 204         return FPGA_FAIL;
 205 }