1 menu "MMC Host controller Support"
4 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
7 This selects MultiMediaCard, Secure Digital and Secure
10 If you want MMC/SD/SDIO support, you should say Y here and
11 also to your specific host controller driver.
14 bool "support for MMC/SD write operations"
18 Enable write access to MMC and SD Cards
21 bool "Poll for broken card detection case"
23 If card detection feature is broken, just poll to detect.
26 bool "Enable MMC controllers using Driver Model"
29 This enables the MultiMediaCard (MMC) uclass which supports MMC and
30 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
31 and non-removable (e.g. eMMC chip) devices are supported. These
32 appear as block devices in U-Boot and can support filesystems such
36 bool "Enable MMC controllers using Driver Model in SPL"
37 depends on SPL_DM && DM_MMC
40 This enables the MultiMediaCard (MMC) uclass which supports MMC and
41 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
42 and non-removable (e.g. eMMC chip) devices are supported. These
43 appear as block devices in U-Boot and can support filesystems such
49 bool "ARM AMBA Multimedia Card Interface and compatible support"
50 depends on DM_MMC && OF_CONTROL
52 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
53 Interface (PL180, PL181 and compatible) support.
54 If you have an ARM(R) platform with a Multimedia Card slot,
61 Some cards and hosts may sometimes behave unexpectedly (quirks).
62 This option enable workarounds to handle those quirks. Some of them
63 are enabled by default, other may require additionnal flags or are
64 enabled by the host driver.
66 config MMC_HW_PARTITIONING
67 bool "Support for HW partitioning command(eMMC)"
70 This adds a command and an API to do hardware partitioning on eMMC
74 bool "Support IO voltage configuration"
76 IO voltage configuration allows selecting the voltage level of the IO
77 lines (not the level of main supply). This is required for UHS
78 support. For eMMC this not mandatory, but not enabling this option may
79 prevent the driver of using the faster modes.
81 config SPL_MMC_IO_VOLTAGE
82 bool "Support IO voltage configuration in SPL"
85 IO voltage configuration allows selecting the voltage level of the IO
86 lines (not the level of main supply). This is required for UHS
87 support. For eMMC this not mandatory, but not enabling this option may
88 prevent the driver of using the faster modes.
90 config MMC_UHS_SUPPORT
91 bool "enable UHS support"
92 depends on MMC_IO_VOLTAGE
94 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
95 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
96 frequency can go up to 208MHz (SDR104)
98 config SPL_MMC_UHS_SUPPORT
99 bool "enable UHS support in SPL"
100 depends on SPL_MMC_IO_VOLTAGE
102 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
103 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
104 frequency can go up to 208MHz (SDR104)
106 config MMC_HS200_SUPPORT
107 bool "enable HS200 support"
109 The HS200 mode is support by some eMMC. The bus frequency is up to
110 200MHz. This mode requires tuning the IO.
113 config SPL_MMC_HS200_SUPPORT
114 bool "enable HS200 support in SPL"
116 The HS200 mode is support by some eMMC. The bus frequency is up to
117 200MHz. This mode requires tuning the IO.
120 bool "Output more information about the MMC"
123 Enable the output of more information about the card such as the
127 bool "Tiny MMC framework in SPL"
129 Enable MMC framework tinification support. This option is useful if
130 if your SPL is extremely size constrained. Heed the warning, enable
131 this option if and only if you know exactly what you are doing, if
132 you are reading this help text, you most likely have no idea :-)
134 The MMC framework is reduced to bare minimum to be useful. No malloc
135 support is needed for the MMC framework operation with this option
136 enabled. The framework supports exactly one MMC device and exactly
137 one MMC driver. The MMC driver can be adjusted to avoid any malloc
138 operations too, which can remove the need for malloc support in SPL
139 and thus further reduce footprint.
142 bool "TI DAVINCI Multimedia Card Interface support"
143 depends on ARCH_DAVINCI
146 This selects the TI DAVINCI Multimedia card Interface.
147 If you have an DAVINCI board with a Multimedia Card slot,
148 say Y here. If unsure, say N.
151 bool "Synopsys DesignWare Memory Card Interface"
153 This selects support for the Synopsys DesignWare Mobile Storage IP
154 block, this provides host support for SD and MMC interfaces, in both
155 PIO, internal DMA mode and external DMA mode.
158 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
159 depends on ARCH_EXYNOS
163 This selects support for Samsung Exynos SoC specific extensions to the
164 Synopsys DesignWare Memory Card Interface driver. Select this option
165 for platforms based on Exynos4 and Exynos5 SoC's.
168 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
171 This selects support for Hisilicon K3 SoC specific extensions to the
172 Synopsys DesignWare Memory Card Interface driver. Select this option
173 for platforms based on Hisilicon K3 SoC's.
175 config MMC_DW_ROCKCHIP
176 bool "Rockchip SD/MMC controller support"
177 depends on DM_MMC && OF_CONTROL
180 This enables support for the Rockchip SD/MMM controller, which is
181 based on Designware IP. The device is compatible with at least
182 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
183 as removeable SD and micro-SD cards.
185 config MMC_DW_SOCFPGA
186 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
187 depends on ARCH_SOCFPGA
191 This selects support for Altera SOCFPGA specific extensions to the
192 Synopsys DesignWare Memory Card Interface driver. Select this option
193 for platforms based on Altera SOCFPGA.
196 bool "Meson GX EMMC controller support"
197 depends on DM_MMC && BLK && ARCH_MESON
199 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
202 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
204 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
205 Multimedia Card Interface. If you have an i.MX or MPC512x platform
206 with a Multimedia Card slot, say Y here.
211 bool "Freescale MXS Multimedia Card Interface support"
212 depends on MX23 || MX28 || MX6 || MX7
214 select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
215 select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
217 This selects the Freescale SSP MMC controller found on MXS based
218 platforms like mx23/28.
223 bool "Support for MMC controllers on PCI"
225 This selects PCI-based MMC controllers.
226 If you have an MMC controller on a PCI bus, say Y here.
231 bool "TI OMAP High Speed Multimedia Card Interface support"
232 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
233 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
235 This selects the TI OMAP High Speed Multimedia card Interface.
236 If you have an omap2plus board with a Multimedia Card slot,
241 config MMC_OMAP36XX_PINS
242 bool "Enable MMC1 on OMAP36xx/37xx"
243 depends on OMAP34XX && MMC_OMAP_HS
245 This enables extended-drain in the MMC/SD/SDIO1I/O and
246 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
247 specific to the OMAP36xx/37xx using MMC1
249 If you have a controller with this interface, say Y here.
254 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
255 depends on ARCH_RMOBILE
257 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
260 bool "UniPhier/RCar SD/MMC Host Controller support"
261 depends on ARCH_UNIPHIER || ARCH_RMOBILE
262 depends on BLK && DM_MMC
263 depends on OF_CONTROL
265 This selects support for the Matsushita SD/MMC Host Controller on
266 SocioNext UniPhier and Renesas RCar SoCs.
269 bool "BCM2835 family custom SD/MMC Host Controller support"
270 depends on ARCH_BCM283X
271 depends on BLK && DM_MMC
272 depends on OF_CONTROL
275 This selects support for the custom SD host controller in the BCM2835
278 If you have a BCM2835 platform with SD or MMC devices, say Y here.
283 bool "Sandbox MMC support"
285 depends on BLK && DM_MMC && OF_CONTROL
287 This select a dummy sandbox MMC driver. At present this does nothing
288 other than allow sandbox to be build with MMC support. This
289 improves build coverage for sandbox and makes it easier to detect
290 MMC build errors with sandbox.
293 bool "Secure Digital Host Controller Interface support"
295 This selects the generic Secure Digital Host Controller Interface.
296 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
297 and Toshiba(R). Most controllers found in laptops are of this type.
299 If you have a controller with this interface, say Y here.
303 config MMC_SDHCI_IO_ACCESSORS
307 This is silent Kconfig symbol that is selected by the drivers that
308 need to overwrite SDHCI IO memory accessors.
310 config MMC_SDHCI_SDMA
311 bool "Support SDHCI SDMA"
314 This enables support for the SDMA (Single Operation DMA) defined
315 in the SD Host Controller Standard Specification Version 1.00 .
317 config MMC_SDHCI_ATMEL
318 bool "Atmel SDHCI controller support"
320 depends on DM_MMC && BLK && ARCH_AT91
323 This enables support for the Atmel SDHCI controller, which supports
324 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
325 Memory Card Specification V3.0, and the SDIO V3.0 specification.
326 It is compliant with the SD Host Controller Standard V3.0
329 config MMC_SDHCI_BCM2835
330 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
331 depends on ARCH_BCM283X
333 select MMC_SDHCI_IO_ACCESSORS
335 This selects the BCM2835 SD/MMC controller.
337 If you have a BCM2835 platform with SD or MMC devices,
342 config MMC_SDHCI_CADENCE
343 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
344 depends on BLK && DM_MMC
346 depends on OF_CONTROL
348 This selects the Cadence SD/SDIO/eMMC driver.
350 If you have a controller with this interface, say Y here.
354 config MMC_SDHCI_KONA
355 bool "SDHCI support on Broadcom KONA platform"
358 This selects the Broadcom Kona Secure Digital Host Controller
359 Interface(SDHCI) support.
360 This is used in Broadcom mobile SoCs.
362 If you have a controller with this interface, say Y here.
365 bool "Qualcomm SDHCI controller"
366 depends on BLK && DM_MMC
369 Enables support for SDHCI 2.0 controller present on some Qualcomm
370 Snapdragon devices. This device is compatible with eMMC v4.5 and
371 SD 3.0 specifications. Both SD and eMMC devices are supported.
372 Card-detect gpios are not supported.
375 bool "SDHCI support on Marvell platform"
376 depends on ARCH_MVEBU
379 This selects the Secure Digital Host Controller Interface on
382 If you have a controller with this interface, say Y here.
386 config MMC_SDHCI_PIC32
387 bool "Microchip PIC32 on-chip SDHCI support"
388 depends on DM_MMC && MACH_PIC32
391 Support for Microchip PIC32 SDHCI controller.
393 config MMC_SDHCI_ROCKCHIP
394 bool "Arasan SDHCI controller for Rockchip support"
395 depends on ARCH_ROCKCHIP
396 depends on DM_MMC && BLK
399 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
402 bool "SDHCI support on Samsung S5P SoC"
405 This selects the Secure Digital Host Controller Interface (SDHCI)
408 If you have a controller with this interface, say Y here.
412 config MMC_SDHCI_SPEAR
413 bool "SDHCI support on ST SPEAr platform"
416 This selects the Secure Digital Host Controller Interface (SDHCI)
417 often referrered to as the HSMMC block in some of the ST SPEAR range
420 If you have a controller with this interface, say Y here.
425 bool "SDHCI support for STMicroelectronics SoC"
426 depends on MMC_SDHCI && OF_CONTROL
428 This selects the Secure Digital Host Controller Interface (SDHCI)
429 on STMicroelectronics STiH410 SoC.
431 config MMC_SDHCI_XENON
432 bool "SDHCI support for the Xenon SDHCI controller"
433 depends on MMC_SDHCI && DM_MMC && OF_CONTROL
435 Support for Xenon SDHCI host controller on Marvell Armada 3700
436 7k/8k ARM SoCs platforms
438 If you have a controller with this interface, say Y here.
442 config MMC_SDHCI_TANGIER
443 bool "Tangier SDHCI controller support"
444 depends on DM_MMC && BLK
447 This selects support for SDHCI controller on Tanginer
448 SoC. Note that this controller does not sit on PCI bus and,
449 hence, cannot be enumerated by standard PCI means.
451 If you're using an Intel Tangier SoC (available on Intel
452 Edison board), say Y here.
456 config MMC_SDHCI_TEGRA
457 bool "SDHCI platform support for the Tegra SD/MMC Controller"
461 This selects the Tegra SD/MMC controller. If you have a Tegra
462 platform with SD or MMC devices, say Y here.
466 config MMC_SDHCI_ZYNQ
467 bool "Arasan SDHCI controller support"
468 depends on ARCH_ZYNQ || ARCH_ZYNQMP
469 depends on DM_MMC && OF_CONTROL && BLK
472 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
475 bool "Allwinner sunxi SD/MMC Host Controller support"
476 depends on ARCH_SUNXI && !UART0_PORT_F
479 This selects support for the SD/MMC Host Controller on
480 Allwinner sunxi SoCs.
482 config MMC_SUNXI_HAS_NEW_MODE
486 config GENERIC_ATMEL_MCI
487 bool "Atmel Multimedia Card Interface support"
488 depends on DM_MMC && BLK && ARCH_AT91
490 This enables support for Atmel High Speed Multimedia Card Interface
491 (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
492 the SD Memory Card Specification V2.0, the SDIO V2.0 specification
496 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
497 depends on DM_MMC && BLK && OF_CONTROL
499 This selects support for the SD/MMC controller on STM32H7 SoCs.
500 If you have a board based on such a SoC and with a SD/MMC slot,
504 bool "Andestech SD/MMC controller support"
505 depends on DM_MMC && OF_CONTROL && BLK && FTSDC010
507 This enables support for the Andestech SD/MMM controller, which is
511 bool "Ftsdc010 SD/MMC controller Support"
513 This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
517 config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
518 bool "Disable external clock loopback"
519 depends on MMC_SDHCI_TEGRA && TEGRA124
521 Disable the external clock loopback and use the internal one on SDMMC3
522 as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
523 being set to 0xfffd according to the TRM.
525 TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
526 approach once proper kernel integration made it mainline.
530 config SYS_FSL_ERRATUM_ESDHC111
533 config SYS_FSL_ERRATUM_ESDHC13
536 config SYS_FSL_ERRATUM_ESDHC135
539 config SYS_FSL_ERRATUM_ESDHC_A001