drivers/mmc/fsl_esdhc.c

   1 /*
   2  * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
   3  * Andy Fleming
   4  *
   5  * Based vaguely on the pxa mmc code:
   6  * (C) Copyright 2003
   7  * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #include <config.h>
  13 #include <common.h>
  14 #include <command.h>
  15 #include <hwconfig.h>
  16 #include <mmc.h>
  17 #include <part.h>
  18 #include <malloc.h>
  19 #include <mmc.h>
  20 #include <fsl_esdhc.h>
  21 #include <fdt_support.h>
  22 #include <asm/io.h>
  23
  24 DECLARE_GLOBAL_DATA_PTR;
  25
  26 struct fsl_esdhc {
  27         uint    dsaddr;         /* SDMA system address register */
  28         uint    blkattr;        /* Block attributes register */
  29         uint    cmdarg;         /* Command argument register */
  30         uint    xfertyp;        /* Transfer type register */
  31         uint    cmdrsp0;        /* Command response 0 register */
  32         uint    cmdrsp1;        /* Command response 1 register */
  33         uint    cmdrsp2;        /* Command response 2 register */
  34         uint    cmdrsp3;        /* Command response 3 register */
  35         uint    datport;        /* Buffer data port register */
  36         uint    prsstat;        /* Present state register */
  37         uint    proctl;         /* Protocol control register */
  38         uint    sysctl;         /* System Control Register */
  39         uint    irqstat;        /* Interrupt status register */
  40         uint    irqstaten;      /* Interrupt status enable register */
  41         uint    irqsigen;       /* Interrupt signal enable register */
  42         uint    autoc12err;     /* Auto CMD error status register */
  43         uint    hostcapblt;     /* Host controller capabilities register */
  44         uint    wml;            /* Watermark level register */
  45         uint    mixctrl;        /* For USDHC */
  46         char    reserved1[4];   /* reserved */
  47         uint    fevt;           /* Force event register */
  48         uint    admaes;         /* ADMA error status register */
  49         uint    adsaddr;        /* ADMA system address register */
  50         char    reserved2[160]; /* reserved */
  51         uint    hostver;        /* Host controller version register */
  52         char    reserved3[4];   /* reserved */
  53         uint    dmaerraddr;     /* DMA error address register */
  54         char    reserved4[4];   /* reserved */
  55         uint    dmaerrattr;     /* DMA error attribute register */
  56         char    reserved5[4];   /* reserved */
  57         uint    hostcapblt2;    /* Host controller capabilities register 2 */
  58         char    reserved6[8];   /* reserved */
  59         uint    tcr;            /* Tuning control register */
  60         char    reserved7[28];  /* reserved */
  61         uint    sddirctl;       /* SD direction control register */
  62         char    reserved8[712]; /* reserved */
  63         uint    scr;            /* eSDHC control register */
  64 };
  65
  66 /* Return the XFERTYP flags for a given command and data packet */
  67 static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
  68 {
  69         uint xfertyp = 0;
  70
  71         if (data) {
  72                 xfertyp |= XFERTYP_DPSEL;
  73 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
  74                 xfertyp |= XFERTYP_DMAEN;
  75 #endif
  76                 if (data->blocks > 1) {
  77                         xfertyp |= XFERTYP_MSBSEL;
  78                         xfertyp |= XFERTYP_BCEN;
  79 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
  80                         xfertyp |= XFERTYP_AC12EN;
  81 #endif
  82                 }
  83
  84                 if (data->flags & MMC_DATA_READ)
  85                         xfertyp |= XFERTYP_DTDSEL;
  86         }
  87
  88         if (cmd->resp_type & MMC_RSP_CRC)
  89                 xfertyp |= XFERTYP_CCCEN;
  90         if (cmd->resp_type & MMC_RSP_OPCODE)
  91                 xfertyp |= XFERTYP_CICEN;
  92         if (cmd->resp_type & MMC_RSP_136)
  93                 xfertyp |= XFERTYP_RSPTYP_136;
  94         else if (cmd->resp_type & MMC_RSP_BUSY)
  95                 xfertyp |= XFERTYP_RSPTYP_48_BUSY;
  96         else if (cmd->resp_type & MMC_RSP_PRESENT)
  97                 xfertyp |= XFERTYP_RSPTYP_48;
  98
  99 #if defined(CONFIG_MX53) || defined(CONFIG_T4240QDS)
 100         if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
 101                 xfertyp |= XFERTYP_CMDTYP_ABORT;
 102 #endif
 103         return XFERTYP_CMD(cmd->cmdidx) | xfertyp;
 104 }
 105
 106 #ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
 107 /*
 108  * PIO Read/Write Mode reduce the performace as DMA is not used in this mode.
 109  */
 110 static void
 111 esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
 112 {
 113         struct fsl_esdhc_cfg *cfg = mmc->priv;
 114         struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 115         uint blocks;
 116         char *buffer;
 117         uint databuf;
 118         uint size;
 119         uint irqstat;
 120         uint timeout;
 121
 122         if (data->flags & MMC_DATA_READ) {
 123                 blocks = data->blocks;
 124                 buffer = data->dest;
 125                 while (blocks) {
 126                         timeout = PIO_TIMEOUT;
 127                         size = data->blocksize;
 128                         irqstat = esdhc_read32(&regs->irqstat);
 129                         while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_BREN)
 130                                 && --timeout);
 131                         if (timeout <= 0) {
 132                                 printf("\nData Read Failed in PIO Mode.");
 133                                 return;
 134                         }
 135                         while (size && (!(irqstat & IRQSTAT_TC))) {
 136                                 udelay(100); /* Wait before last byte transfer complete */
 137                                 irqstat = esdhc_read32(&regs->irqstat);
 138                                 databuf = in_le32(&regs->datport);
 139                                 *((uint *)buffer) = databuf;
 140                                 buffer += 4;
 141                                 size -= 4;
 142                         }
 143                         blocks--;
 144                 }
 145         } else {
 146                 blocks = data->blocks;
 147                 buffer = (char *)data->src;
 148                 while (blocks) {
 149                         timeout = PIO_TIMEOUT;
 150                         size = data->blocksize;
 151                         irqstat = esdhc_read32(&regs->irqstat);
 152                         while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_BWEN)
 153                                 && --timeout);
 154                         if (timeout <= 0) {
 155                                 printf("\nData Write Failed in PIO Mode.");
 156                                 return;
 157                         }
 158                         while (size && (!(irqstat & IRQSTAT_TC))) {
 159                                 udelay(100); /* Wait before last byte transfer complete */
 160                                 databuf = *((uint *)buffer);
 161                                 buffer += 4;
 162                                 size -= 4;
 163                                 irqstat = esdhc_read32(&regs->irqstat);
 164                                 out_le32(&regs->datport, databuf);
 165                         }
 166                         blocks--;
 167                 }
 168         }
 169 }
 170 #endif
 171
 172 static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
 173 {
 174         int timeout;
 175         struct fsl_esdhc_cfg *cfg = mmc->priv;
 176         struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 177 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
 178         uint wml_value;
 179
 180         wml_value = data->blocksize/4;
 181
 182         if (data->flags & MMC_DATA_READ) {
 183                 if (wml_value > WML_RD_WML_MAX)
 184                         wml_value = WML_RD_WML_MAX_VAL;
 185
 186                 esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value);
 187                 esdhc_write32(&regs->dsaddr, (u32)data->dest);
 188         } else {
 189                 flush_dcache_range((ulong)data->src,
 190                                    (ulong)data->src+data->blocks
 191                                          *data->blocksize);
 192
 193                 if (wml_value > WML_WR_WML_MAX)
 194                         wml_value = WML_WR_WML_MAX_VAL;
 195                 if ((esdhc_read32(&regs->prsstat) & PRSSTAT_WPSPL) == 0) {
 196                         printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
 197                         return TIMEOUT;
 198                 }
 199
 200                 esdhc_clrsetbits32(&regs->wml, WML_WR_WML_MASK,
 201                                         wml_value << 16);
 202                 esdhc_write32(&regs->dsaddr, (u32)data->src);
 203         }
 204 #else   /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
 205         if (!(data->flags & MMC_DATA_READ)) {
 206                 if ((esdhc_read32(&regs->prsstat) & PRSSTAT_WPSPL) == 0) {
 207                         printf("\nThe SD card is locked. "
 208                                 "Can not write to a locked card.\n\n");
 209                         return TIMEOUT;
 210                 }
 211                 esdhc_write32(&regs->dsaddr, (u32)data->src);
 212         } else
 213                 esdhc_write32(&regs->dsaddr, (u32)data->dest);
 214 #endif  /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
 215
 216         esdhc_write32(&regs->blkattr, data->blocks << 16 | data->blocksize);
 217
 218         /* Calculate the timeout period for data transactions */
 219         /*
 220          * 1)Timeout period = (2^(timeout+13)) SD Clock cycles
 221          * 2)Timeout period should be minimum 0.250sec as per SD Card spec
 222          *  So, Number of SD Clock cycles for 0.25sec should be minimum
 223          *              (SD Clock/sec * 0.25 sec) SD Clock cycles
 224          *              = (mmc->clock * 1/4) SD Clock cycles
 225          * As 1) >=  2)
 226          * => (2^(timeout+13)) >= mmc->clock * 1/4
 227          * Taking log2 both the sides
 228          * => timeout + 13 >= log2(mmc->clock/4)
 229          * Rounding up to next power of 2
 230          * => timeout + 13 = log2(mmc->clock/4) + 1
 231          * => timeout + 13 = fls(mmc->clock/4)
 232          */
 233         timeout = fls(mmc->clock/4);
 234         timeout -= 13;
 235
 236         if (timeout > 14)
 237                 timeout = 14;
 238
 239         if (timeout < 0)
 240                 timeout = 0;
 241
 242 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
 243         if ((timeout == 4) || (timeout == 8) || (timeout == 12))
 244                 timeout++;
 245 #endif
 246
 247 #ifdef ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
 248         timeout = 0xE;
 249 #endif
 250         esdhc_clrsetbits32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16);
 251
 252         return 0;
 253 }
 254
 255 static void check_and_invalidate_dcache_range
 256         (struct mmc_cmd *cmd,
 257          struct mmc_data *data) {
 258         unsigned start = (unsigned)data->dest ;
 259         unsigned size = roundup(ARCH_DMA_MINALIGN,
 260                                 data->blocks*data->blocksize);
 261         unsigned end = start+size ;
 262         invalidate_dcache_range(start, end);
 263 }
 264 /*
 265  * Sends a command out on the bus.  Takes the mmc pointer,
 266  * a command pointer, and an optional data pointer.
 267  */
 268 static int
 269 esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 270 {
 271         int     err = 0;
 272         uint    xfertyp;
 273         uint    irqstat;
 274         struct fsl_esdhc_cfg *cfg = mmc->priv;
 275         volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 276
 277 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
 278         if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
 279                 return 0;
 280 #endif
 281
 282         esdhc_write32(&regs->irqstat, -1);
 283
 284         sync();
 285
 286         /* Wait for the bus to be idle */
 287         while ((esdhc_read32(&regs->prsstat) & PRSSTAT_CICHB) ||
 288                         (esdhc_read32(&regs->prsstat) & PRSSTAT_CIDHB))
 289                 ;
 290
 291         while (esdhc_read32(&regs->prsstat) & PRSSTAT_DLA)
 292                 ;
 293
 294         /* Wait at least 8 SD clock cycles before the next command */
 295         /*
 296          * Note: This is way more than 8 cycles, but 1ms seems to
 297          * resolve timing issues with some cards
 298          */
 299         udelay(1000);
 300
 301         /* Set up for a data transfer if we have one */
 302         if (data) {
 303                 err = esdhc_setup_data(mmc, data);
 304                 if(err)
 305                         return err;
 306         }
 307
 308         /* Figure out the transfer arguments */
 309         xfertyp = esdhc_xfertyp(cmd, data);
 310
 311         /* Mask all irqs */
 312         esdhc_write32(&regs->irqsigen, 0);
 313
 314         /* Send the command */
 315         esdhc_write32(&regs->cmdarg, cmd->cmdarg);
 316 #if defined(CONFIG_FSL_USDHC)
 317         esdhc_write32(&regs->mixctrl,
 318         (esdhc_read32(&regs->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F));
 319         esdhc_write32(&regs->xfertyp, xfertyp & 0xFFFF0000);
 320 #else
 321         esdhc_write32(&regs->xfertyp, xfertyp);
 322 #endif
 323
 324         /* Wait for the command to complete */
 325         while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE)))
 326                 ;
 327
 328         irqstat = esdhc_read32(&regs->irqstat);
 329
 330         if (irqstat & CMD_ERR) {
 331                 err = COMM_ERR;
 332                 goto out;
 333         }
 334
 335         if (irqstat & IRQSTAT_CTOE) {
 336                 err = TIMEOUT;
 337                 goto out;
 338         }
 339
 340         /* Workaround for ESDHC errata ENGcm03648 */
 341         if (!data && (cmd->resp_type & MMC_RSP_BUSY)) {
 342                 int timeout = 2500;
 343
 344                 /* Poll on DATA0 line for cmd with busy signal for 250 ms */
 345                 while (timeout > 0 && !(esdhc_read32(&regs->prsstat) &
 346                                         PRSSTAT_DAT0)) {
 347                         udelay(100);
 348                         timeout--;
 349                 }
 350
 351                 if (timeout <= 0) {
 352                         printf("Timeout waiting for DAT0 to go high!\n");
 353                         err = TIMEOUT;
 354                         goto out;
 355                 }
 356         }
 357
 358         /* Copy the response to the response buffer */
 359         if (cmd->resp_type & MMC_RSP_136) {
 360                 u32 cmdrsp3, cmdrsp2, cmdrsp1, cmdrsp0;
 361
 362                 cmdrsp3 = esdhc_read32(&regs->cmdrsp3);
 363                 cmdrsp2 = esdhc_read32(&regs->cmdrsp2);
 364                 cmdrsp1 = esdhc_read32(&regs->cmdrsp1);
 365                 cmdrsp0 = esdhc_read32(&regs->cmdrsp0);
 366                 cmd->response[0] = (cmdrsp3 << 8) | (cmdrsp2 >> 24);
 367                 cmd->response[1] = (cmdrsp2 << 8) | (cmdrsp1 >> 24);
 368                 cmd->response[2] = (cmdrsp1 << 8) | (cmdrsp0 >> 24);
 369                 cmd->response[3] = (cmdrsp0 << 8);
 370         } else
 371                 cmd->response[0] = esdhc_read32(&regs->cmdrsp0);
 372
 373         /* Wait until all of the blocks are transferred */
 374         if (data) {
 375 #ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
 376                 esdhc_pio_read_write(mmc, data);
 377 #else
 378                 do {
 379                         irqstat = esdhc_read32(&regs->irqstat);
 380
 381                         if (irqstat & IRQSTAT_DTOE) {
 382                                 err = TIMEOUT;
 383                                 goto out;
 384                         }
 385
 386                         if (irqstat & DATA_ERR) {
 387                                 err = COMM_ERR;
 388                                 goto out;
 389                         }
 390                 } while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
 391 #endif
 392                 if (data->flags & MMC_DATA_READ)
 393                         check_and_invalidate_dcache_range(cmd, data);
 394         }
 395
 396 out:
 397         /* Reset CMD and DATA portions on error */
 398         if (err) {
 399                 esdhc_write32(&regs->sysctl, esdhc_read32(&regs->sysctl) |
 400                               SYSCTL_RSTC);
 401                 while (esdhc_read32(&regs->sysctl) & SYSCTL_RSTC)
 402                         ;
 403
 404                 if (data) {
 405                         esdhc_write32(&regs->sysctl,
 406                                       esdhc_read32(&regs->sysctl) |
 407                                       SYSCTL_RSTD);
 408                         while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTD))
 409                                 ;
 410                 }
 411         }
 412
 413         esdhc_write32(&regs->irqstat, -1);
 414
 415         return err;
 416 }
 417
 418 static void set_sysctl(struct mmc *mmc, uint clock)
 419 {
 420         int div, pre_div;
 421         struct fsl_esdhc_cfg *cfg = mmc->priv;
 422         volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 423         int sdhc_clk = cfg->sdhc_clk;
 424         uint clk;
 425
 426         if (clock < mmc->cfg->f_min)
 427                 clock = mmc->cfg->f_min;
 428
 429         if (sdhc_clk / 16 > clock) {
 430                 for (pre_div = 2; pre_div < 256; pre_div *= 2)
 431                         if ((sdhc_clk / pre_div) <= (clock * 16))
 432                                 break;
 433         } else
 434                 pre_div = 2;
 435
 436         for (div = 1; div <= 16; div++)
 437                 if ((sdhc_clk / (div * pre_div)) <= clock)
 438                         break;
 439
 440         pre_div >>= 1;
 441         div -= 1;
 442
 443         clk = (pre_div << 8) | (div << 4);
 444
 445         esdhc_clrbits32(&regs->sysctl, SYSCTL_CKEN);
 446
 447         esdhc_clrsetbits32(&regs->sysctl, SYSCTL_CLOCK_MASK, clk);
 448
 449         udelay(10000);
 450
 451         clk = SYSCTL_PEREN | SYSCTL_CKEN;
 452
 453         esdhc_setbits32(&regs->sysctl, clk);
 454 }
 455
 456 static void esdhc_set_ios(struct mmc *mmc)
 457 {
 458         struct fsl_esdhc_cfg *cfg = mmc->priv;
 459         struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 460
 461         /* Set the clock speed */
 462         set_sysctl(mmc, mmc->clock);
 463
 464         /* Set the bus width */
 465         esdhc_clrbits32(&regs->proctl, PROCTL_DTW_4 | PROCTL_DTW_8);
 466
 467         if (mmc->bus_width == 4)
 468                 esdhc_setbits32(&regs->proctl, PROCTL_DTW_4);
 469         else if (mmc->bus_width == 8)
 470                 esdhc_setbits32(&regs->proctl, PROCTL_DTW_8);
 471
 472 }
 473
 474 static int esdhc_init(struct mmc *mmc)
 475 {
 476         struct fsl_esdhc_cfg *cfg = mmc->priv;
 477         struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 478         int timeout = 1000;
 479
 480         /* Reset the entire host controller */
 481         esdhc_setbits32(&regs->sysctl, SYSCTL_RSTA);
 482
 483         /* Wait until the controller is available */
 484         while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA) && --timeout)
 485                 udelay(1000);
 486
 487 #ifndef ARCH_MXC
 488         /* Enable cache snooping */
 489         esdhc_write32(&regs->scr, 0x00000040);
 490 #endif
 491
 492         esdhc_setbits32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
 493
 494         /* Set the initial clock speed */
 495         mmc_set_clock(mmc, 400000);
 496
 497         /* Disable the BRR and BWR bits in IRQSTAT */
 498         esdhc_clrbits32(&regs->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR);
 499
 500         /* Put the PROCTL reg back to the default */
 501         esdhc_write32(&regs->proctl, PROCTL_INIT);
 502
 503         /* Set timout to the maximum value */
 504         esdhc_clrsetbits32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
 505
 506         return 0;
 507 }
 508
 509 static int esdhc_getcd(struct mmc *mmc)
 510 {
 511         struct fsl_esdhc_cfg *cfg = mmc->priv;
 512         struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 513         int timeout = 1000;
 514
 515 #ifdef CONFIG_ESDHC_DETECT_QUIRK
 516         if (CONFIG_ESDHC_DETECT_QUIRK)
 517                 return 1;
 518 #endif
 519         while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_CINS) && --timeout)
 520                 udelay(1000);
 521
 522         return timeout > 0;
 523 }
 524
 525 static void esdhc_reset(struct fsl_esdhc *regs)
 526 {
 527         unsigned long timeout = 100; /* wait max 100 ms */
 528
 529         /* reset the controller */
 530         esdhc_setbits32(&regs->sysctl, SYSCTL_RSTA);
 531
 532         /* hardware clears the bit when it is done */
 533         while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA) && --timeout)
 534                 udelay(1000);
 535         if (!timeout)
 536                 printf("MMC/SD: Reset never completed.\n");
 537 }
 538
 539 static const struct mmc_ops esdhc_ops = {
 540         .send_cmd       = esdhc_send_cmd,
 541         .set_ios        = esdhc_set_ios,
 542         .init           = esdhc_init,
 543         .getcd          = esdhc_getcd,
 544 };
 545
 546 int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
 547 {
 548         struct fsl_esdhc *regs;
 549         struct mmc *mmc;
 550         u32 caps, voltage_caps;
 551
 552         if (!cfg)
 553                 return -1;
 554
 555         regs = (struct fsl_esdhc *)cfg->esdhc_base;
 556
 557         /* First reset the eSDHC controller */
 558         esdhc_reset(regs);
 559
 560         esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_HCKEN
 561                                 | SYSCTL_IPGEN | SYSCTL_CKEN);
 562
 563         memset(&cfg->cfg, 0, sizeof(cfg->cfg));
 564
 565         voltage_caps = 0;
 566         caps = regs->hostcapblt;
 567
 568 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
 569         caps = caps & ~(ESDHC_HOSTCAPBLT_SRS |
 570                         ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30);
 571 #endif
 572
 573 /* T4240 host controller capabilities register should have VS33 bit */
 574 #ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 575         caps = caps | ESDHC_HOSTCAPBLT_VS33;
 576 #endif
 577
 578         if (caps & ESDHC_HOSTCAPBLT_VS18)
 579                 voltage_caps |= MMC_VDD_165_195;
 580         if (caps & ESDHC_HOSTCAPBLT_VS30)
 581                 voltage_caps |= MMC_VDD_29_30 | MMC_VDD_30_31;
 582         if (caps & ESDHC_HOSTCAPBLT_VS33)
 583                 voltage_caps |= MMC_VDD_32_33 | MMC_VDD_33_34;
 584
 585         cfg->cfg.name = "FSL_SDHC";
 586         cfg->cfg.ops = &esdhc_ops;
 587 #ifdef CONFIG_SYS_SD_VOLTAGE
 588         cfg->cfg.voltages = CONFIG_SYS_SD_VOLTAGE;
 589 #else
 590         cfg->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
 591 #endif
 592         if ((cfg->cfg.voltages & voltage_caps) == 0) {
 593                 printf("voltage not supported by controller\n");
 594                 return -1;
 595         }
 596
 597         cfg->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC;
 598
 599         if (cfg->max_bus_width > 0) {
 600                 if (cfg->max_bus_width < 8)
 601                         cfg->cfg.host_caps &= ~MMC_MODE_8BIT;
 602                 if (cfg->max_bus_width < 4)
 603                         cfg->cfg.host_caps &= ~MMC_MODE_4BIT;
 604         }
 605
 606         if (caps & ESDHC_HOSTCAPBLT_HSS)
 607                 cfg->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 608
 609 #ifdef CONFIG_ESDHC_DETECT_8_BIT_QUIRK
 610         if (CONFIG_ESDHC_DETECT_8_BIT_QUIRK)
 611                 cfg->cfg.host_caps &= ~MMC_MODE_8BIT;
 612 #endif
 613
 614         cfg->cfg.f_min = 400000;
 615         cfg->cfg.f_max = MIN(gd->arch.sdhc_clk, 52000000);
 616
 617         cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 618
 619         mmc = mmc_create(&cfg->cfg, cfg);
 620         if (mmc == NULL)
 621                 return -1;
 622
 623         return 0;
 624 }
 625
 626 int fsl_esdhc_mmc_init(bd_t *bis)
 627 {
 628         struct fsl_esdhc_cfg *cfg;
 629
 630         cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1);
 631         cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
 632         cfg->sdhc_clk = gd->arch.sdhc_clk;
 633         return fsl_esdhc_initialize(bis, cfg);
 634 }
 635
 636 #ifdef CONFIG_OF_LIBFDT
 637 void fdt_fixup_esdhc(void *blob, bd_t *bd)
 638 {
 639         const char *compat = "fsl,esdhc";
 640
 641 #ifdef CONFIG_FSL_ESDHC_PIN_MUX
 642         if (!hwconfig("esdhc")) {
 643                 do_fixup_by_compat(blob, compat, "status", "disabled",
 644                                 8 + 1, 1);
 645                 return;
 646         }
 647 #endif
 648
 649         do_fixup_by_compat_u32(blob, compat, "clock-frequency",
 650                                gd->arch.sdhc_clk, 1);
 651
 652         do_fixup_by_compat(blob, compat, "status", "okay",
 653                            4 + 1, 1);
 654 }
 655 #endif