mtd: nand: Add page argument to write_page() etc.

[people/ms/u-boot.git] / drivers / mtd / nand / mxs_nand.c

/*
 * Freescale i.MX28 NAND flash driver
 *
 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
 * on behalf of DENX Software Engineering GmbH
 *
 * Based on code from LTIB:
 * Freescale GPMI NFC NAND Flash Driver
 *
 * Copyright (C) 2010 Freescale Semiconductor, Inc.
 * Copyright (C) 2008 Embedded Alley Solutions, Inc.
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

#include <common.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/types.h>
#include <malloc.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/regs-bch.h>
#include <asm/imx-common/regs-gpmi.h>
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/dma.h>

#define MXS_NAND_DMA_DESCRIPTOR_COUNT           4

#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE          512
#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT    2
#else
#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT    0
#endif
#define MXS_NAND_METADATA_SIZE                  10
#define MXS_NAND_BITS_PER_ECC_LEVEL             13
#define MXS_NAND_COMMAND_BUFFER_SIZE            32

#define MXS_NAND_BCH_TIMEOUT                    10000

struct mxs_nand_info {
        int             cur_chip;

        uint32_t        cmd_queue_len;
        uint32_t        data_buf_size;

        uint8_t         *cmd_buf;
        uint8_t         *data_buf;
        uint8_t         *oob_buf;

        uint8_t         marking_block_bad;
        uint8_t         raw_oob_mode;

        /* Functions with altered behaviour */
        int             (*hooked_read_oob)(struct mtd_info *mtd,
                                loff_t from, struct mtd_oob_ops *ops);
        int             (*hooked_write_oob)(struct mtd_info *mtd,
                                loff_t to, struct mtd_oob_ops *ops);
        int             (*hooked_block_markbad)(struct mtd_info *mtd,
                                loff_t ofs);

        /* DMA descriptors */
        struct mxs_dma_desc     **desc;
        uint32_t                desc_index;
};

struct nand_ecclayout fake_ecc_layout;
static int chunk_data_size = MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
static int galois_field = 13;

/*
 * Cache management functions
 */
#ifndef CONFIG_SYS_DCACHE_OFF
static void mxs_nand_flush_data_buf(struct mxs_nand_info *info)
{
        uint32_t addr = (uint32_t)info->data_buf;

        flush_dcache_range(addr, addr + info->data_buf_size);
}

static void mxs_nand_inval_data_buf(struct mxs_nand_info *info)
{
        uint32_t addr = (uint32_t)info->data_buf;

        invalidate_dcache_range(addr, addr + info->data_buf_size);
}

static void mxs_nand_flush_cmd_buf(struct mxs_nand_info *info)
{
        uint32_t addr = (uint32_t)info->cmd_buf;

        flush_dcache_range(addr, addr + MXS_NAND_COMMAND_BUFFER_SIZE);
}
#else
static inline void mxs_nand_flush_data_buf(struct mxs_nand_info *info) {}
static inline void mxs_nand_inval_data_buf(struct mxs_nand_info *info) {}
static inline void mxs_nand_flush_cmd_buf(struct mxs_nand_info *info) {}
#endif

static struct mxs_dma_desc *mxs_nand_get_dma_desc(struct mxs_nand_info *info)
{
        struct mxs_dma_desc *desc;

        if (info->desc_index >= MXS_NAND_DMA_DESCRIPTOR_COUNT) {
                printf("MXS NAND: Too many DMA descriptors requested\n");
                return NULL;
        }

        desc = info->desc[info->desc_index];
        info->desc_index++;

        return desc;
}

static void mxs_nand_return_dma_descs(struct mxs_nand_info *info)
{
        int i;
        struct mxs_dma_desc *desc;

        for (i = 0; i < info->desc_index; i++) {
                desc = info->desc[i];
                memset(desc, 0, sizeof(struct mxs_dma_desc));
                desc->address = (dma_addr_t)desc;
        }

        info->desc_index = 0;
}

static uint32_t mxs_nand_ecc_chunk_cnt(uint32_t page_data_size)
{
        return page_data_size / chunk_data_size;
}

static uint32_t mxs_nand_ecc_size_in_bits(uint32_t ecc_strength)
{
        return ecc_strength * galois_field;
}

static uint32_t mxs_nand_aux_status_offset(void)
{
        return (MXS_NAND_METADATA_SIZE + 0x3) & ~0x3;
}

static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
                                                uint32_t page_oob_size)
{
        int ecc_strength;
        int max_ecc_strength_supported;

        /* Refer to Chapter 17 for i.MX6DQ, Chapter 18 for i.MX6SX */
        if (is_cpu_type(MXC_CPU_MX6SX) || is_soc_type(MXC_SOC_MX7))
                max_ecc_strength_supported = 62;
        else
                max_ecc_strength_supported = 40;

        /*
         * Determine the ECC layout with the formula:
         *      ECC bits per chunk = (total page spare data bits) /
         *              (bits per ECC level) / (chunks per page)
         * where:
         *      total page spare data bits =
         *              (page oob size - meta data size) * (bits per byte)
         */
        ecc_strength = ((page_oob_size - MXS_NAND_METADATA_SIZE) * 8)
                        / (galois_field *
                           mxs_nand_ecc_chunk_cnt(page_data_size));

        return min(round_down(ecc_strength, 2), max_ecc_strength_supported);
}

static inline uint32_t mxs_nand_get_mark_offset(uint32_t page_data_size,
                                                uint32_t ecc_strength)
{
        uint32_t chunk_data_size_in_bits;
        uint32_t chunk_ecc_size_in_bits;
        uint32_t chunk_total_size_in_bits;
        uint32_t block_mark_chunk_number;
        uint32_t block_mark_chunk_bit_offset;
        uint32_t block_mark_bit_offset;

        chunk_data_size_in_bits = chunk_data_size * 8;
        chunk_ecc_size_in_bits  = mxs_nand_ecc_size_in_bits(ecc_strength);

        chunk_total_size_in_bits =
                        chunk_data_size_in_bits + chunk_ecc_size_in_bits;

        /* Compute the bit offset of the block mark within the physical page. */
        block_mark_bit_offset = page_data_size * 8;

        /* Subtract the metadata bits. */
        block_mark_bit_offset -= MXS_NAND_METADATA_SIZE * 8;

        /*
         * Compute the chunk number (starting at zero) in which the block mark
         * appears.
         */
        block_mark_chunk_number =
                        block_mark_bit_offset / chunk_total_size_in_bits;

        /*
         * Compute the bit offset of the block mark within its chunk, and
         * validate it.
         */
        block_mark_chunk_bit_offset = block_mark_bit_offset -
                        (block_mark_chunk_number * chunk_total_size_in_bits);

        if (block_mark_chunk_bit_offset > chunk_data_size_in_bits)
                return 1;

        /*
         * Now that we know the chunk number in which the block mark appears,
         * we can subtract all the ECC bits that appear before it.
         */
        block_mark_bit_offset -=
                block_mark_chunk_number * chunk_ecc_size_in_bits;

        return block_mark_bit_offset;
}

static uint32_t mxs_nand_mark_byte_offset(struct mtd_info *mtd)
{
        uint32_t ecc_strength;
        ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize);
        return mxs_nand_get_mark_offset(mtd->writesize, ecc_strength) >> 3;
}

static uint32_t mxs_nand_mark_bit_offset(struct mtd_info *mtd)
{
        uint32_t ecc_strength;
        ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize);
        return mxs_nand_get_mark_offset(mtd->writesize, ecc_strength) & 0x7;
}

/*
 * Wait for BCH complete IRQ and clear the IRQ
 */
static int mxs_nand_wait_for_bch_complete(void)
{
        struct mxs_bch_regs *bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE;
        int timeout = MXS_NAND_BCH_TIMEOUT;
        int ret;

        ret = mxs_wait_mask_set(&bch_regs->hw_bch_ctrl_reg,
                BCH_CTRL_COMPLETE_IRQ, timeout);

        writel(BCH_CTRL_COMPLETE_IRQ, &bch_regs->hw_bch_ctrl_clr);

        return ret;
}

/*
 * This is the function that we install in the cmd_ctrl function pointer of the
 * owning struct nand_chip. The only functions in the reference implementation
 * that use these functions pointers are cmdfunc and select_chip.
 *
 * In this driver, we implement our own select_chip, so this function will only
 * be called by the reference implementation's cmdfunc. For this reason, we can
 * ignore the chip enable bit and concentrate only on sending bytes to the NAND
 * Flash.
 */
static void mxs_nand_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
{
        struct nand_chip *nand = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(nand);
        struct mxs_dma_desc *d;
        uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
        int ret;

        /*
         * If this condition is true, something is _VERY_ wrong in MTD
         * subsystem!
         */
        if (nand_info->cmd_queue_len == MXS_NAND_COMMAND_BUFFER_SIZE) {
                printf("MXS NAND: Command queue too long\n");
                return;
        }

        /*
         * Every operation begins with a command byte and a series of zero or
         * more address bytes. These are distinguished by either the Address
         * Latch Enable (ALE) or Command Latch Enable (CLE) signals being
         * asserted. When MTD is ready to execute the command, it will
         * deasert both latch enables.
         *
         * Rather than run a separate DMA operation for every single byte, we
         * queue them up and run a single DMA operation for the entire series
         * of command and data bytes.
         */
        if (ctrl & (NAND_ALE | NAND_CLE)) {
                if (data != NAND_CMD_NONE)
                        nand_info->cmd_buf[nand_info->cmd_queue_len++] = data;
                return;
        }

        /*
         * If control arrives here, MTD has deasserted both the ALE and CLE,
         * which means it's ready to run an operation. Check if we have any
         * bytes to send.
         */
        if (nand_info->cmd_queue_len == 0)
                return;

        /* Compile the DMA descriptor -- a descriptor that sends command. */
        d = mxs_nand_get_dma_desc(nand_info);
        d->cmd.data =
                MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
                MXS_DMA_DESC_CHAIN | MXS_DMA_DESC_DEC_SEM |
                MXS_DMA_DESC_WAIT4END | (3 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
                (nand_info->cmd_queue_len << MXS_DMA_DESC_BYTES_OFFSET);

        d->cmd.address = (dma_addr_t)nand_info->cmd_buf;

        d->cmd.pio_words[0] =
                GPMI_CTRL0_COMMAND_MODE_WRITE |
                GPMI_CTRL0_WORD_LENGTH |
                (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
                GPMI_CTRL0_ADDRESS_NAND_CLE |
                GPMI_CTRL0_ADDRESS_INCREMENT |
                nand_info->cmd_queue_len;

        mxs_dma_desc_append(channel, d);

        /* Flush caches */
        mxs_nand_flush_cmd_buf(nand_info);

        /* Execute the DMA chain. */
        ret = mxs_dma_go(channel);
        if (ret)
                printf("MXS NAND: Error sending command\n");

        mxs_nand_return_dma_descs(nand_info);

        /* Reset the command queue. */
        nand_info->cmd_queue_len = 0;
}

/*
 * Test if the NAND flash is ready.
 */
static int mxs_nand_device_ready(struct mtd_info *mtd)
{
        struct nand_chip *chip = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
        struct mxs_gpmi_regs *gpmi_regs =
                (struct mxs_gpmi_regs *)MXS_GPMI_BASE;
        uint32_t tmp;

        tmp = readl(&gpmi_regs->hw_gpmi_stat);
        tmp >>= (GPMI_STAT_READY_BUSY_OFFSET + nand_info->cur_chip);

        return tmp & 1;
}

/*
 * Select the NAND chip.
 */
static void mxs_nand_select_chip(struct mtd_info *mtd, int chip)
{
        struct nand_chip *nand = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(nand);

        nand_info->cur_chip = chip;
}

/*
 * Handle block mark swapping.
 *
 * Note that, when this function is called, it doesn't know whether it's
 * swapping the block mark, or swapping it *back* -- but it doesn't matter
 * because the the operation is the same.
 */
static void mxs_nand_swap_block_mark(struct mtd_info *mtd,
                                        uint8_t *data_buf, uint8_t *oob_buf)
{
        uint32_t bit_offset;
        uint32_t buf_offset;

        uint32_t src;
        uint32_t dst;

        bit_offset = mxs_nand_mark_bit_offset(mtd);
        buf_offset = mxs_nand_mark_byte_offset(mtd);

        /*
         * Get the byte from the data area that overlays the block mark. Since
         * the ECC engine applies its own view to the bits in the page, the
         * physical block mark won't (in general) appear on a byte boundary in
         * the data.
         */
        src = data_buf[buf_offset] >> bit_offset;
        src |= data_buf[buf_offset + 1] << (8 - bit_offset);

        dst = oob_buf[0];

        oob_buf[0] = src;

        data_buf[buf_offset] &= ~(0xff << bit_offset);
        data_buf[buf_offset + 1] &= 0xff << bit_offset;

        data_buf[buf_offset] |= dst << bit_offset;
        data_buf[buf_offset + 1] |= dst >> (8 - bit_offset);
}

/*
 * Read data from NAND.
 */
static void mxs_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int length)
{
        struct nand_chip *nand = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(nand);
        struct mxs_dma_desc *d;
        uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
        int ret;

        if (length > NAND_MAX_PAGESIZE) {
                printf("MXS NAND: DMA buffer too big\n");
                return;
        }

        if (!buf) {
                printf("MXS NAND: DMA buffer is NULL\n");
                return;
        }

        /* Compile the DMA descriptor - a descriptor that reads data. */
        d = mxs_nand_get_dma_desc(nand_info);
        d->cmd.data =
                MXS_DMA_DESC_COMMAND_DMA_WRITE | MXS_DMA_DESC_IRQ |
                MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
                (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
                (length << MXS_DMA_DESC_BYTES_OFFSET);

        d->cmd.address = (dma_addr_t)nand_info->data_buf;

        d->cmd.pio_words[0] =
                GPMI_CTRL0_COMMAND_MODE_READ |
                GPMI_CTRL0_WORD_LENGTH |
                (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
                GPMI_CTRL0_ADDRESS_NAND_DATA |
                length;

        mxs_dma_desc_append(channel, d);

        /*
         * A DMA descriptor that waits for the command to end and the chip to
         * become ready.
         *
         * I think we actually should *not* be waiting for the chip to become
         * ready because, after all, we don't care. I think the original code
         * did that and no one has re-thought it yet.
         */
        d = mxs_nand_get_dma_desc(nand_info);
        d->cmd.data =
                MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
                MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_DEC_SEM |
                MXS_DMA_DESC_WAIT4END | (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET);

        d->cmd.address = 0;

        d->cmd.pio_words[0] =
                GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY |
                GPMI_CTRL0_WORD_LENGTH |
                (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
                GPMI_CTRL0_ADDRESS_NAND_DATA;

        mxs_dma_desc_append(channel, d);

        /* Invalidate caches */
        mxs_nand_inval_data_buf(nand_info);

        /* Execute the DMA chain. */
        ret = mxs_dma_go(channel);
        if (ret) {
                printf("MXS NAND: DMA read error\n");
                goto rtn;
        }

        /* Invalidate caches */
        mxs_nand_inval_data_buf(nand_info);

        memcpy(buf, nand_info->data_buf, length);

rtn:
        mxs_nand_return_dma_descs(nand_info);
}

/*
 * Write data to NAND.
 */
static void mxs_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
                                int length)
{
        struct nand_chip *nand = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(nand);
        struct mxs_dma_desc *d;
        uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
        int ret;

        if (length > NAND_MAX_PAGESIZE) {
                printf("MXS NAND: DMA buffer too big\n");
                return;
        }

        if (!buf) {
                printf("MXS NAND: DMA buffer is NULL\n");
                return;
        }

        memcpy(nand_info->data_buf, buf, length);

        /* Compile the DMA descriptor - a descriptor that writes data. */
        d = mxs_nand_get_dma_desc(nand_info);
        d->cmd.data =
                MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
                MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
                (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
                (length << MXS_DMA_DESC_BYTES_OFFSET);

        d->cmd.address = (dma_addr_t)nand_info->data_buf;

        d->cmd.pio_words[0] =
                GPMI_CTRL0_COMMAND_MODE_WRITE |
                GPMI_CTRL0_WORD_LENGTH |
                (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
                GPMI_CTRL0_ADDRESS_NAND_DATA |
                length;

        mxs_dma_desc_append(channel, d);

        /* Flush caches */
        mxs_nand_flush_data_buf(nand_info);

        /* Execute the DMA chain. */
        ret = mxs_dma_go(channel);
        if (ret)
                printf("MXS NAND: DMA write error\n");

        mxs_nand_return_dma_descs(nand_info);
}

/*
 * Read a single byte from NAND.
 */
static uint8_t mxs_nand_read_byte(struct mtd_info *mtd)
{
        uint8_t buf;
        mxs_nand_read_buf(mtd, &buf, 1);
        return buf;
}

/*
 * Read a page from NAND.
 */
static int mxs_nand_ecc_read_page(struct mtd_info *mtd, struct nand_chip *nand,
                                        uint8_t *buf, int oob_required,
                                        int page)
{
        struct mxs_nand_info *nand_info = nand_get_controller_data(nand);
        struct mxs_dma_desc *d;
        uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
        uint32_t corrected = 0, failed = 0;
        uint8_t *status;
        int i, ret;

        /* Compile the DMA descriptor - wait for ready. */
        d = mxs_nand_get_dma_desc(nand_info);
        d->cmd.data =
                MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
                MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_WAIT4END |
                (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET);

        d->cmd.address = 0;

        d->cmd.pio_words[0] =
                GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY |
                GPMI_CTRL0_WORD_LENGTH |
                (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
                GPMI_CTRL0_ADDRESS_NAND_DATA;

        mxs_dma_desc_append(channel, d);

        /* Compile the DMA descriptor - enable the BCH block and read. */
        d = mxs_nand_get_dma_desc(nand_info);
        d->cmd.data =
                MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
                MXS_DMA_DESC_WAIT4END | (6 << MXS_DMA_DESC_PIO_WORDS_OFFSET);

        d->cmd.address = 0;

        d->cmd.pio_words[0] =
                GPMI_CTRL0_COMMAND_MODE_READ |
                GPMI_CTRL0_WORD_LENGTH |
                (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
                GPMI_CTRL0_ADDRESS_NAND_DATA |
                (mtd->writesize + mtd->oobsize);
        d->cmd.pio_words[1] = 0;
        d->cmd.pio_words[2] =
                GPMI_ECCCTRL_ENABLE_ECC |
                GPMI_ECCCTRL_ECC_CMD_DECODE |
                GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE;
        d->cmd.pio_words[3] = mtd->writesize + mtd->oobsize;
        d->cmd.pio_words[4] = (dma_addr_t)nand_info->data_buf;
        d->cmd.pio_words[5] = (dma_addr_t)nand_info->oob_buf;

        mxs_dma_desc_append(channel, d);

        /* Compile the DMA descriptor - disable the BCH block. */
        d = mxs_nand_get_dma_desc(nand_info);
        d->cmd.data =
                MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
                MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_WAIT4END |
                (3 << MXS_DMA_DESC_PIO_WORDS_OFFSET);

        d->cmd.address = 0;

        d->cmd.pio_words[0] =
                GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY |
                GPMI_CTRL0_WORD_LENGTH |
                (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
                GPMI_CTRL0_ADDRESS_NAND_DATA |
                (mtd->writesize + mtd->oobsize);
        d->cmd.pio_words[1] = 0;
        d->cmd.pio_words[2] = 0;

        mxs_dma_desc_append(channel, d);

        /* Compile the DMA descriptor - deassert the NAND lock and interrupt. */
        d = mxs_nand_get_dma_desc(nand_info);
        d->cmd.data =
                MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
                MXS_DMA_DESC_DEC_SEM;

        d->cmd.address = 0;

        mxs_dma_desc_append(channel, d);

        /* Invalidate caches */
        mxs_nand_inval_data_buf(nand_info);

        /* Execute the DMA chain. */
        ret = mxs_dma_go(channel);
        if (ret) {
                printf("MXS NAND: DMA read error\n");
                goto rtn;
        }

        ret = mxs_nand_wait_for_bch_complete();
        if (ret) {
                printf("MXS NAND: BCH read timeout\n");
                goto rtn;
        }

        /* Invalidate caches */
        mxs_nand_inval_data_buf(nand_info);

        /* Read DMA completed, now do the mark swapping. */
        mxs_nand_swap_block_mark(mtd, nand_info->data_buf, nand_info->oob_buf);

        /* Loop over status bytes, accumulating ECC status. */
        status = nand_info->oob_buf + mxs_nand_aux_status_offset();
        for (i = 0; i < mxs_nand_ecc_chunk_cnt(mtd->writesize); i++) {
                if (status[i] == 0x00)
                        continue;

                if (status[i] == 0xff)
                        continue;

                if (status[i] == 0xfe) {
                        failed++;
                        continue;
                }

                corrected += status[i];
        }

        /* Propagate ECC status to the owning MTD. */
        mtd->ecc_stats.failed += failed;
        mtd->ecc_stats.corrected += corrected;

        /*
         * It's time to deliver the OOB bytes. See mxs_nand_ecc_read_oob() for
         * details about our policy for delivering the OOB.
         *
         * We fill the caller's buffer with set bits, and then copy the block
         * mark to the caller's buffer. Note that, if block mark swapping was
         * necessary, it has already been done, so we can rely on the first
         * byte of the auxiliary buffer to contain the block mark.
         */
        memset(nand->oob_poi, 0xff, mtd->oobsize);

        nand->oob_poi[0] = nand_info->oob_buf[0];

        memcpy(buf, nand_info->data_buf, mtd->writesize);

rtn:
        mxs_nand_return_dma_descs(nand_info);

        return ret;
}

/*
 * Write a page to NAND.
 */
static int mxs_nand_ecc_write_page(struct mtd_info *mtd,
                                struct nand_chip *nand, const uint8_t *buf,
                                int oob_required, int page)
{
        struct mxs_nand_info *nand_info = nand_get_controller_data(nand);
        struct mxs_dma_desc *d;
        uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
        int ret;

        memcpy(nand_info->data_buf, buf, mtd->writesize);
        memcpy(nand_info->oob_buf, nand->oob_poi, mtd->oobsize);

        /* Handle block mark swapping. */
        mxs_nand_swap_block_mark(mtd, nand_info->data_buf, nand_info->oob_buf);

        /* Compile the DMA descriptor - write data. */
        d = mxs_nand_get_dma_desc(nand_info);
        d->cmd.data =
                MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
                MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
                (6 << MXS_DMA_DESC_PIO_WORDS_OFFSET);

        d->cmd.address = 0;

        d->cmd.pio_words[0] =
                GPMI_CTRL0_COMMAND_MODE_WRITE |
                GPMI_CTRL0_WORD_LENGTH |
                (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
                GPMI_CTRL0_ADDRESS_NAND_DATA;
        d->cmd.pio_words[1] = 0;
        d->cmd.pio_words[2] =
                GPMI_ECCCTRL_ENABLE_ECC |
                GPMI_ECCCTRL_ECC_CMD_ENCODE |
                GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE;
        d->cmd.pio_words[3] = (mtd->writesize + mtd->oobsize);
        d->cmd.pio_words[4] = (dma_addr_t)nand_info->data_buf;
        d->cmd.pio_words[5] = (dma_addr_t)nand_info->oob_buf;

        mxs_dma_desc_append(channel, d);

        /* Flush caches */
        mxs_nand_flush_data_buf(nand_info);

        /* Execute the DMA chain. */
        ret = mxs_dma_go(channel);
        if (ret) {
                printf("MXS NAND: DMA write error\n");
                goto rtn;
        }

        ret = mxs_nand_wait_for_bch_complete();
        if (ret) {
                printf("MXS NAND: BCH write timeout\n");
                goto rtn;
        }

rtn:
        mxs_nand_return_dma_descs(nand_info);
        return 0;
}

/*
 * Read OOB from NAND.
 *
 * This function is a veneer that replaces the function originally installed by
 * the NAND Flash MTD code.
 */
static int mxs_nand_hook_read_oob(struct mtd_info *mtd, loff_t from,
                                        struct mtd_oob_ops *ops)
{
        struct nand_chip *chip = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
        int ret;

        if (ops->mode == MTD_OPS_RAW)
                nand_info->raw_oob_mode = 1;
        else
                nand_info->raw_oob_mode = 0;

        ret = nand_info->hooked_read_oob(mtd, from, ops);

        nand_info->raw_oob_mode = 0;

        return ret;
}

/*
 * Write OOB to NAND.
 *
 * This function is a veneer that replaces the function originally installed by
 * the NAND Flash MTD code.
 */
static int mxs_nand_hook_write_oob(struct mtd_info *mtd, loff_t to,
                                        struct mtd_oob_ops *ops)
{
        struct nand_chip *chip = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
        int ret;

        if (ops->mode == MTD_OPS_RAW)
                nand_info->raw_oob_mode = 1;
        else
                nand_info->raw_oob_mode = 0;

        ret = nand_info->hooked_write_oob(mtd, to, ops);

        nand_info->raw_oob_mode = 0;

        return ret;
}

/*
 * Mark a block bad in NAND.
 *
 * This function is a veneer that replaces the function originally installed by
 * the NAND Flash MTD code.
 */
static int mxs_nand_hook_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
        struct nand_chip *chip = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
        int ret;

        nand_info->marking_block_bad = 1;

        ret = nand_info->hooked_block_markbad(mtd, ofs);

        nand_info->marking_block_bad = 0;

        return ret;
}

/*
 * There are several places in this driver where we have to handle the OOB and
 * block marks. This is the function where things are the most complicated, so
 * this is where we try to explain it all. All the other places refer back to
 * here.
 *
 * These are the rules, in order of decreasing importance:
 *
 * 1) Nothing the caller does can be allowed to imperil the block mark, so all
 *    write operations take measures to protect it.
 *
 * 2) In read operations, the first byte of the OOB we return must reflect the
 *    true state of the block mark, no matter where that block mark appears in
 *    the physical page.
 *
 * 3) ECC-based read operations return an OOB full of set bits (since we never
 *    allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads
 *    return).
 *
 * 4) "Raw" read operations return a direct view of the physical bytes in the
 *    page, using the conventional definition of which bytes are data and which
 *    are OOB. This gives the caller a way to see the actual, physical bytes
 *    in the page, without the distortions applied by our ECC engine.
 *
 * What we do for this specific read operation depends on whether we're doing
 * "raw" read, or an ECC-based read.
 *
 * It turns out that knowing whether we want an "ECC-based" or "raw" read is not
 * easy. When reading a page, for example, the NAND Flash MTD code calls our
 * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
 * ECC-based or raw view of the page is implicit in which function it calls
 * (there is a similar pair of ECC-based/raw functions for writing).
 *
 * Since MTD assumes the OOB is not covered by ECC, there is no pair of
 * ECC-based/raw functions for reading or or writing the OOB. The fact that the
 * caller wants an ECC-based or raw view of the page is not propagated down to
 * this driver.
 *
 * Since our OOB *is* covered by ECC, we need this information. So, we hook the
 * ecc.read_oob and ecc.write_oob function pointers in the owning
 * struct mtd_info with our own functions. These hook functions set the
 * raw_oob_mode field so that, when control finally arrives here, we'll know
 * what to do.
 */
static int mxs_nand_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
                                int page)
{
        struct mxs_nand_info *nand_info = nand_get_controller_data(nand);

        /*
         * First, fill in the OOB buffer. If we're doing a raw read, we need to
         * get the bytes from the physical page. If we're not doing a raw read,
         * we need to fill the buffer with set bits.
         */
        if (nand_info->raw_oob_mode) {
                /*
                 * If control arrives here, we're doing a "raw" read. Send the
                 * command to read the conventional OOB and read it.
                 */
                nand->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
                nand->read_buf(mtd, nand->oob_poi, mtd->oobsize);
        } else {
                /*
                 * If control arrives here, we're not doing a "raw" read. Fill
                 * the OOB buffer with set bits and correct the block mark.
                 */
                memset(nand->oob_poi, 0xff, mtd->oobsize);

                nand->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
                mxs_nand_read_buf(mtd, nand->oob_poi, 1);
        }

        return 0;

}

/*
 * Write OOB data to NAND.
 */
static int mxs_nand_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *nand,
                                        int page)
{
        struct mxs_nand_info *nand_info = nand_get_controller_data(nand);
        uint8_t block_mark = 0;

        /*
         * There are fundamental incompatibilities between the i.MX GPMI NFC and
         * the NAND Flash MTD model that make it essentially impossible to write
         * the out-of-band bytes.
         *
         * We permit *ONE* exception. If the *intent* of writing the OOB is to
         * mark a block bad, we can do that.
         */

        if (!nand_info->marking_block_bad) {
                printf("NXS NAND: Writing OOB isn't supported\n");
                return -EIO;
        }

        /* Write the block mark. */
        nand->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
        nand->write_buf(mtd, &block_mark, 1);
        nand->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);

        /* Check if it worked. */
        if (nand->waitfunc(mtd, nand) & NAND_STATUS_FAIL)
                return -EIO;

        return 0;
}

/*
 * Claims all blocks are good.
 *
 * In principle, this function is *only* called when the NAND Flash MTD system
 * isn't allowed to keep an in-memory bad block table, so it is forced to ask
 * the driver for bad block information.
 *
 * In fact, we permit the NAND Flash MTD system to have an in-memory BBT, so
 * this function is *only* called when we take it away.
 *
 * Thus, this function is only called when we want *all* blocks to look good,
 * so it *always* return success.
 */
static int mxs_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
{
        return 0;
}

/*
 * Nominally, the purpose of this function is to look for or create the bad
 * block table. In fact, since the we call this function at the very end of
 * the initialization process started by nand_scan(), and we doesn't have a
 * more formal mechanism, we "hook" this function to continue init process.
 *
 * At this point, the physical NAND Flash chips have been identified and
 * counted, so we know the physical geometry. This enables us to make some
 * important configuration decisions.
 *
 * The return value of this function propogates directly back to this driver's
 * call to nand_scan(). Anything other than zero will cause this driver to
 * tear everything down and declare failure.
 */
static int mxs_nand_scan_bbt(struct mtd_info *mtd)
{
        struct nand_chip *nand = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(nand);
        struct mxs_bch_regs *bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE;
        uint32_t tmp;

        if (mtd->oobsize > MXS_NAND_CHUNK_DATA_CHUNK_SIZE) {
                galois_field = 14;
                chunk_data_size = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 2;
        }

        if (mtd->oobsize > chunk_data_size) {
                printf("Not support the NAND chips whose oob size is larger then %d bytes!\n", chunk_data_size);
                return -EINVAL;
        }

        /* Configure BCH and set NFC geometry */
        mxs_reset_block(&bch_regs->hw_bch_ctrl_reg);

        /* Configure layout 0 */
        tmp = (mxs_nand_ecc_chunk_cnt(mtd->writesize) - 1)
                << BCH_FLASHLAYOUT0_NBLOCKS_OFFSET;
        tmp |= MXS_NAND_METADATA_SIZE << BCH_FLASHLAYOUT0_META_SIZE_OFFSET;
        tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
                << BCH_FLASHLAYOUT0_ECC0_OFFSET;
        tmp |= chunk_data_size >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
        tmp |= (14 == galois_field ? 1 : 0) <<
                BCH_FLASHLAYOUT0_GF13_0_GF14_1_OFFSET;
        writel(tmp, &bch_regs->hw_bch_flash0layout0);

        tmp = (mtd->writesize + mtd->oobsize)
                << BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET;
        tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
                << BCH_FLASHLAYOUT1_ECCN_OFFSET;
        tmp |= chunk_data_size >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
        tmp |= (14 == galois_field ? 1 : 0) <<
                BCH_FLASHLAYOUT1_GF13_0_GF14_1_OFFSET;
        writel(tmp, &bch_regs->hw_bch_flash0layout1);

        /* Set *all* chip selects to use layout 0 */
        writel(0, &bch_regs->hw_bch_layoutselect);

        /* Enable BCH complete interrupt */
        writel(BCH_CTRL_COMPLETE_IRQ_EN, &bch_regs->hw_bch_ctrl_set);

        /* Hook some operations at the MTD level. */
        if (mtd->_read_oob != mxs_nand_hook_read_oob) {
                nand_info->hooked_read_oob = mtd->_read_oob;
                mtd->_read_oob = mxs_nand_hook_read_oob;
        }

        if (mtd->_write_oob != mxs_nand_hook_write_oob) {
                nand_info->hooked_write_oob = mtd->_write_oob;
                mtd->_write_oob = mxs_nand_hook_write_oob;
        }

        if (mtd->_block_markbad != mxs_nand_hook_block_markbad) {
                nand_info->hooked_block_markbad = mtd->_block_markbad;
                mtd->_block_markbad = mxs_nand_hook_block_markbad;
        }

        /* We use the reference implementation for bad block management. */
        return nand_default_bbt(mtd);
}

/*
 * Allocate DMA buffers
 */
int mxs_nand_alloc_buffers(struct mxs_nand_info *nand_info)
{
        uint8_t *buf;
        const int size = NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE;

        nand_info->data_buf_size = roundup(size, MXS_DMA_ALIGNMENT);

        /* DMA buffers */
        buf = memalign(MXS_DMA_ALIGNMENT, nand_info->data_buf_size);
        if (!buf) {
                printf("MXS NAND: Error allocating DMA buffers\n");
                return -ENOMEM;
        }

        memset(buf, 0, nand_info->data_buf_size);

        nand_info->data_buf = buf;
        nand_info->oob_buf = buf + NAND_MAX_PAGESIZE;
        /* Command buffers */
        nand_info->cmd_buf = memalign(MXS_DMA_ALIGNMENT,
                                MXS_NAND_COMMAND_BUFFER_SIZE);
        if (!nand_info->cmd_buf) {
                free(buf);
                printf("MXS NAND: Error allocating command buffers\n");
                return -ENOMEM;
        }
        memset(nand_info->cmd_buf, 0, MXS_NAND_COMMAND_BUFFER_SIZE);
        nand_info->cmd_queue_len = 0;

        return 0;
}

/*
 * Initializes the NFC hardware.
 */
int mxs_nand_init(struct mxs_nand_info *info)
{
        struct mxs_gpmi_regs *gpmi_regs =
                (struct mxs_gpmi_regs *)MXS_GPMI_BASE;
        struct mxs_bch_regs *bch_regs =
                (struct mxs_bch_regs *)MXS_BCH_BASE;
        int i = 0, j, ret = 0;

        info->desc = malloc(sizeof(struct mxs_dma_desc *) *
                                MXS_NAND_DMA_DESCRIPTOR_COUNT);
        if (!info->desc) {
                ret = -ENOMEM;
                goto err1;
        }

        /* Allocate the DMA descriptors. */
        for (i = 0; i < MXS_NAND_DMA_DESCRIPTOR_COUNT; i++) {
                info->desc[i] = mxs_dma_desc_alloc();
                if (!info->desc[i]) {
                        ret = -ENOMEM;
                        goto err2;
                }
        }

        /* Init the DMA controller. */
        for (j = MXS_DMA_CHANNEL_AHB_APBH_GPMI0;
                j <= MXS_DMA_CHANNEL_AHB_APBH_GPMI7; j++) {
                ret = mxs_dma_init_channel(j);
                if (ret)
                        goto err3;
        }

        /* Reset the GPMI block. */
        mxs_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg);
        mxs_reset_block(&bch_regs->hw_bch_ctrl_reg);

        /*
         * Choose NAND mode, set IRQ polarity, disable write protection and
         * select BCH ECC.
         */
        clrsetbits_le32(&gpmi_regs->hw_gpmi_ctrl1,
                        GPMI_CTRL1_GPMI_MODE,
                        GPMI_CTRL1_ATA_IRQRDY_POLARITY | GPMI_CTRL1_DEV_RESET |
                        GPMI_CTRL1_BCH_MODE);

        return 0;

err3:
        for (--j; j >= MXS_DMA_CHANNEL_AHB_APBH_GPMI0; j--)
                mxs_dma_release(j);
err2:
        for (--i; i >= 0; i--)
                mxs_dma_desc_free(info->desc[i]);
        free(info->desc);
err1:
        if (ret == -ENOMEM)
                printf("MXS NAND: Unable to allocate DMA descriptors\n");
        return ret;
}

/*!
 * This function is called during the driver binding process.
 *
 * @param   pdev  the device structure used to store device specific
 *                information that is used by the suspend, resume and
 *                remove functions
 *
 * @return  The function always returns 0.
 */
int board_nand_init(struct nand_chip *nand)
{
        struct mxs_nand_info *nand_info;
        int err;

        nand_info = malloc(sizeof(struct mxs_nand_info));
        if (!nand_info) {
                printf("MXS NAND: Failed to allocate private data\n");
                return -ENOMEM;
        }
        memset(nand_info, 0, sizeof(struct mxs_nand_info));

        err = mxs_nand_alloc_buffers(nand_info);
        if (err)
                goto err1;

        err = mxs_nand_init(nand_info);
        if (err)
                goto err2;

        memset(&fake_ecc_layout, 0, sizeof(fake_ecc_layout));

        nand_set_controller_data(nand, nand_info);
        nand->options |= NAND_NO_SUBPAGE_WRITE;

        nand->cmd_ctrl          = mxs_nand_cmd_ctrl;

        nand->dev_ready         = mxs_nand_device_ready;
        nand->select_chip       = mxs_nand_select_chip;
        nand->block_bad         = mxs_nand_block_bad;
        nand->scan_bbt          = mxs_nand_scan_bbt;

        nand->read_byte         = mxs_nand_read_byte;

        nand->read_buf          = mxs_nand_read_buf;
        nand->write_buf         = mxs_nand_write_buf;

        nand->ecc.read_page     = mxs_nand_ecc_read_page;
        nand->ecc.write_page    = mxs_nand_ecc_write_page;
        nand->ecc.read_oob      = mxs_nand_ecc_read_oob;
        nand->ecc.write_oob     = mxs_nand_ecc_write_oob;

        nand->ecc.layout        = &fake_ecc_layout;
        nand->ecc.mode          = NAND_ECC_HW;
        nand->ecc.bytes         = 9;
        nand->ecc.size          = 512;
        nand->ecc.strength      = 8;

        return 0;

err2:
        free(nand_info->data_buf);
        free(nand_info->cmd_buf);
err1:
        free(nand_info);
        return err;
}