]> git.ipfire.org Git - people/ms/u-boot.git/blob - drivers/mtd/nand/nand_bbt.c
NAND: Update to support 64 bit device size
[people/ms/u-boot.git] / drivers / mtd / nand / nand_bbt.c
1 /*
2 * drivers/mtd/nand_bbt.c
3 *
4 * Overview:
5 * Bad block table support for the NAND driver
6 *
7 * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 * Description:
14 *
15 * When nand_scan_bbt is called, then it tries to find the bad block table
16 * depending on the options in the bbt descriptor(s). If a bbt is found
17 * then the contents are read and the memory based bbt is created. If a
18 * mirrored bbt is selected then the mirror is searched too and the
19 * versions are compared. If the mirror has a greater version number
20 * than the mirror bbt is used to build the memory based bbt.
21 * If the tables are not versioned, then we "or" the bad block information.
22 * If one of the bbt's is out of date or does not exist it is (re)created.
23 * If no bbt exists at all then the device is scanned for factory marked
24 * good / bad blocks and the bad block tables are created.
25 *
26 * For manufacturer created bbts like the one found on M-SYS DOC devices
27 * the bbt is searched and read but never created
28 *
29 * The autogenerated bad block table is located in the last good blocks
30 * of the device. The table is mirrored, so it can be updated eventually.
31 * The table is marked in the oob area with an ident pattern and a version
32 * number which indicates which of both tables is more up to date.
33 *
34 * The table uses 2 bits per block
35 * 11b: block is good
36 * 00b: block is factory marked bad
37 * 01b, 10b: block is marked bad due to wear
38 *
39 * The memory bad block table uses the following scheme:
40 * 00b: block is good
41 * 01b: block is marked bad due to wear
42 * 10b: block is reserved (to protect the bbt area)
43 * 11b: block is factory marked bad
44 *
45 * Multichip devices like DOC store the bad block info per floor.
46 *
47 * Following assumptions are made:
48 * - bbts start at a page boundary, if autolocated on a block boundary
49 * - the space necessary for a bbt in FLASH does not exceed a block boundary
50 *
51 */
52
53 #include <common.h>
54 #include <malloc.h>
55 #include <linux/mtd/compat.h>
56 #include <linux/mtd/mtd.h>
57 #include <linux/mtd/nand.h>
58
59 #include <asm/errno.h>
60
61 /* XXX U-BOOT XXX */
62 #if 0
63 #include <linux/slab.h>
64 #include <linux/types.h>
65 #include <linux/mtd/mtd.h>
66 #include <linux/mtd/nand.h>
67 #include <linux/mtd/nand_ecc.h>
68 #include <linux/mtd/compatmac.h>
69 #include <linux/bitops.h>
70 #include <linux/delay.h>
71 #include <linux/vmalloc.h>
72 #endif
73
74 /**
75 * check_pattern - [GENERIC] check if a pattern is in the buffer
76 * @buf: the buffer to search
77 * @len: the length of buffer to search
78 * @paglen: the pagelength
79 * @td: search pattern descriptor
80 *
81 * Check for a pattern at the given place. Used to search bad block
82 * tables and good / bad block identifiers.
83 * If the SCAN_EMPTY option is set then check, if all bytes except the
84 * pattern area contain 0xff
85 *
86 */
87 static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
88 {
89 int i, end = 0;
90 uint8_t *p = buf;
91
92 end = paglen + td->offs;
93 if (td->options & NAND_BBT_SCANEMPTY) {
94 for (i = 0; i < end; i++) {
95 if (p[i] != 0xff)
96 return -1;
97 }
98 }
99 p += end;
100
101 /* Compare the pattern */
102 for (i = 0; i < td->len; i++) {
103 if (p[i] != td->pattern[i])
104 return -1;
105 }
106
107 if (td->options & NAND_BBT_SCANEMPTY) {
108 p += td->len;
109 end += td->len;
110 for (i = end; i < len; i++) {
111 if (*p++ != 0xff)
112 return -1;
113 }
114 }
115 return 0;
116 }
117
118 /**
119 * check_short_pattern - [GENERIC] check if a pattern is in the buffer
120 * @buf: the buffer to search
121 * @td: search pattern descriptor
122 *
123 * Check for a pattern at the given place. Used to search bad block
124 * tables and good / bad block identifiers. Same as check_pattern, but
125 * no optional empty check
126 *
127 */
128 static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
129 {
130 int i;
131 uint8_t *p = buf;
132
133 /* Compare the pattern */
134 for (i = 0; i < td->len; i++) {
135 if (p[td->offs + i] != td->pattern[i])
136 return -1;
137 }
138 return 0;
139 }
140
141 /**
142 * read_bbt - [GENERIC] Read the bad block table starting from page
143 * @mtd: MTD device structure
144 * @buf: temporary buffer
145 * @page: the starting page
146 * @num: the number of bbt descriptors to read
147 * @bits: number of bits per block
148 * @offs: offset in the memory table
149 * @reserved_block_code: Pattern to identify reserved blocks
150 *
151 * Read the bad block table starting from page.
152 *
153 */
154 static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
155 int bits, int offs, int reserved_block_code)
156 {
157 int res, i, j, act = 0;
158 struct nand_chip *this = mtd->priv;
159 size_t retlen, len, totlen;
160 loff_t from;
161 uint8_t msk = (uint8_t) ((1 << bits) - 1);
162
163 totlen = (num * bits) >> 3;
164 from = ((loff_t) page) << this->page_shift;
165
166 while (totlen) {
167 len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
168 res = mtd->read(mtd, from, len, &retlen, buf);
169 if (res < 0) {
170 if (retlen != len) {
171 printk(KERN_INFO "nand_bbt: Error reading bad block table\n");
172 return res;
173 }
174 printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
175 }
176
177 /* Analyse data */
178 for (i = 0; i < len; i++) {
179 uint8_t dat = buf[i];
180 for (j = 0; j < 8; j += bits, act += 2) {
181 uint8_t tmp = (dat >> j) & msk;
182 if (tmp == msk)
183 continue;
184 if (reserved_block_code && (tmp == reserved_block_code)) {
185 printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%012llx\n",
186 (loff_t)((offs << 2) +
187 (act >> 1)) <<
188 this->bbt_erase_shift);
189 this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
190 mtd->ecc_stats.bbtblocks++;
191 continue;
192 }
193 /* Leave it for now, if its matured we can move this
194 * message to MTD_DEBUG_LEVEL0 */
195 printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%012llx\n",
196 (loff_t)((offs << 2) + (act >> 1)) <<
197 this->bbt_erase_shift);
198 /* Factory marked bad or worn out ? */
199 if (tmp == 0)
200 this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
201 else
202 this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
203 mtd->ecc_stats.badblocks++;
204 }
205 }
206 totlen -= len;
207 from += len;
208 }
209 return 0;
210 }
211
212 /**
213 * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
214 * @mtd: MTD device structure
215 * @buf: temporary buffer
216 * @td: descriptor for the bad block table
217 * @chip: read the table for a specific chip, -1 read all chips.
218 * Applies only if NAND_BBT_PERCHIP option is set
219 *
220 * Read the bad block table for all chips starting at a given page
221 * We assume that the bbt bits are in consecutive order.
222 */
223 static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
224 {
225 struct nand_chip *this = mtd->priv;
226 int res = 0, i;
227 int bits;
228
229 bits = td->options & NAND_BBT_NRBITS_MSK;
230 if (td->options & NAND_BBT_PERCHIP) {
231 int offs = 0;
232 for (i = 0; i < this->numchips; i++) {
233 if (chip == -1 || chip == i)
234 res = read_bbt (mtd, buf, td->pages[i], this->chipsize >> this->bbt_erase_shift, bits, offs, td->reserved_block_code);
235 if (res)
236 return res;
237 offs += this->chipsize >> (this->bbt_erase_shift + 2);
238 }
239 } else {
240 res = read_bbt (mtd, buf, td->pages[0], mtd->size >> this->bbt_erase_shift, bits, 0, td->reserved_block_code);
241 if (res)
242 return res;
243 }
244 return 0;
245 }
246
247 /*
248 * Scan read raw data from flash
249 */
250 static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
251 size_t len)
252 {
253 struct mtd_oob_ops ops;
254
255 ops.mode = MTD_OOB_RAW;
256 ops.ooboffs = 0;
257 ops.ooblen = mtd->oobsize;
258 ops.oobbuf = buf;
259 ops.datbuf = buf;
260 ops.len = len;
261
262 return mtd->read_oob(mtd, offs, &ops);
263 }
264
265 /*
266 * Scan write data with oob to flash
267 */
268 static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
269 uint8_t *buf, uint8_t *oob)
270 {
271 struct mtd_oob_ops ops;
272
273 ops.mode = MTD_OOB_PLACE;
274 ops.ooboffs = 0;
275 ops.ooblen = mtd->oobsize;
276 ops.datbuf = buf;
277 ops.oobbuf = oob;
278 ops.len = len;
279
280 return mtd->write_oob(mtd, offs, &ops);
281 }
282
283 /**
284 * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
285 * @mtd: MTD device structure
286 * @buf: temporary buffer
287 * @td: descriptor for the bad block table
288 * @md: descriptor for the bad block table mirror
289 *
290 * Read the bad block table(s) for all chips starting at a given page
291 * We assume that the bbt bits are in consecutive order.
292 *
293 */
294 static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
295 struct nand_bbt_descr *td, struct nand_bbt_descr *md)
296 {
297 struct nand_chip *this = mtd->priv;
298
299 /* Read the primary version, if available */
300 if (td->options & NAND_BBT_VERSION) {
301 scan_read_raw(mtd, buf, (loff_t)td->pages[0] <<
302 this->page_shift, mtd->writesize);
303 td->version[0] = buf[mtd->writesize + td->veroffs];
304 printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
305 td->pages[0], td->version[0]);
306 }
307
308 /* Read the mirror version, if available */
309 if (md && (md->options & NAND_BBT_VERSION)) {
310 scan_read_raw(mtd, buf, (loff_t)md->pages[0] <<
311 this->page_shift, mtd->writesize);
312 md->version[0] = buf[mtd->writesize + md->veroffs];
313 printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
314 md->pages[0], md->version[0]);
315 }
316 return 1;
317 }
318
319 /*
320 * Scan a given block full
321 */
322 static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
323 loff_t offs, uint8_t *buf, size_t readlen,
324 int scanlen, int len)
325 {
326 int ret, j;
327
328 ret = scan_read_raw(mtd, buf, offs, readlen);
329 if (ret)
330 return ret;
331
332 for (j = 0; j < len; j++, buf += scanlen) {
333 if (check_pattern(buf, scanlen, mtd->writesize, bd))
334 return 1;
335 }
336 return 0;
337 }
338
339 /*
340 * Scan a given block partially
341 */
342 static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
343 loff_t offs, uint8_t *buf, int len)
344 {
345 struct mtd_oob_ops ops;
346 int j, ret;
347
348 ops.ooblen = mtd->oobsize;
349 ops.oobbuf = buf;
350 ops.ooboffs = 0;
351 ops.datbuf = NULL;
352 ops.mode = MTD_OOB_PLACE;
353
354 for (j = 0; j < len; j++) {
355 /*
356 * Read the full oob until read_oob is fixed to
357 * handle single byte reads for 16 bit
358 * buswidth
359 */
360 ret = mtd->read_oob(mtd, offs, &ops);
361 if (ret)
362 return ret;
363
364 if (check_short_pattern(buf, bd))
365 return 1;
366
367 offs += mtd->writesize;
368 }
369 return 0;
370 }
371
372 /**
373 * create_bbt - [GENERIC] Create a bad block table by scanning the device
374 * @mtd: MTD device structure
375 * @buf: temporary buffer
376 * @bd: descriptor for the good/bad block search pattern
377 * @chip: create the table for a specific chip, -1 read all chips.
378 * Applies only if NAND_BBT_PERCHIP option is set
379 *
380 * Create a bad block table by scanning the device
381 * for the given good/bad block identify pattern
382 */
383 static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
384 struct nand_bbt_descr *bd, int chip)
385 {
386 struct nand_chip *this = mtd->priv;
387 int i, numblocks, len, scanlen;
388 int startblock;
389 loff_t from;
390 size_t readlen;
391
392 MTDDEBUG (MTD_DEBUG_LEVEL0, "Scanning device for bad blocks\n");
393
394 if (bd->options & NAND_BBT_SCANALLPAGES)
395 len = 1 << (this->bbt_erase_shift - this->page_shift);
396 else {
397 if (bd->options & NAND_BBT_SCAN2NDPAGE)
398 len = 2;
399 else
400 len = 1;
401 }
402
403 if (!(bd->options & NAND_BBT_SCANEMPTY)) {
404 /* We need only read few bytes from the OOB area */
405 scanlen = 0;
406 readlen = bd->len;
407 } else {
408 /* Full page content should be read */
409 scanlen = mtd->writesize + mtd->oobsize;
410 readlen = len * mtd->writesize;
411 }
412
413 if (chip == -1) {
414 /* Note that numblocks is 2 * (real numblocks) here, see i+=2
415 * below as it makes shifting and masking less painful */
416 numblocks = mtd->size >> (this->bbt_erase_shift - 1);
417 startblock = 0;
418 from = 0;
419 } else {
420 if (chip >= this->numchips) {
421 printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
422 chip + 1, this->numchips);
423 return -EINVAL;
424 }
425 numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
426 startblock = chip * numblocks;
427 numblocks += startblock;
428 from = (loff_t)startblock << (this->bbt_erase_shift - 1);
429 }
430
431 for (i = startblock; i < numblocks;) {
432 int ret;
433
434 if (bd->options & NAND_BBT_SCANALLPAGES)
435 ret = scan_block_full(mtd, bd, from, buf, readlen,
436 scanlen, len);
437 else
438 ret = scan_block_fast(mtd, bd, from, buf, len);
439
440 if (ret < 0)
441 return ret;
442
443 if (ret) {
444 this->bbt[i >> 3] |= 0x03 << (i & 0x6);
445 MTDDEBUG (MTD_DEBUG_LEVEL0,
446 "Bad eraseblock %d at 0x%012llx\n",
447 i >> 1, (unsigned long long)from);
448 mtd->ecc_stats.badblocks++;
449 }
450
451 i += 2;
452 from += (1 << this->bbt_erase_shift);
453 }
454 return 0;
455 }
456
457 /**
458 * search_bbt - [GENERIC] scan the device for a specific bad block table
459 * @mtd: MTD device structure
460 * @buf: temporary buffer
461 * @td: descriptor for the bad block table
462 *
463 * Read the bad block table by searching for a given ident pattern.
464 * Search is preformed either from the beginning up or from the end of
465 * the device downwards. The search starts always at the start of a
466 * block.
467 * If the option NAND_BBT_PERCHIP is given, each chip is searched
468 * for a bbt, which contains the bad block information of this chip.
469 * This is necessary to provide support for certain DOC devices.
470 *
471 * The bbt ident pattern resides in the oob area of the first page
472 * in a block.
473 */
474 static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
475 {
476 struct nand_chip *this = mtd->priv;
477 int i, chips;
478 int bits, startblock, block, dir;
479 int scanlen = mtd->writesize + mtd->oobsize;
480 int bbtblocks;
481 int blocktopage = this->bbt_erase_shift - this->page_shift;
482
483 /* Search direction top -> down ? */
484 if (td->options & NAND_BBT_LASTBLOCK) {
485 startblock = (mtd->size >> this->bbt_erase_shift) - 1;
486 dir = -1;
487 } else {
488 startblock = 0;
489 dir = 1;
490 }
491
492 /* Do we have a bbt per chip ? */
493 if (td->options & NAND_BBT_PERCHIP) {
494 chips = this->numchips;
495 bbtblocks = this->chipsize >> this->bbt_erase_shift;
496 startblock &= bbtblocks - 1;
497 } else {
498 chips = 1;
499 bbtblocks = mtd->size >> this->bbt_erase_shift;
500 }
501
502 /* Number of bits for each erase block in the bbt */
503 bits = td->options & NAND_BBT_NRBITS_MSK;
504
505 for (i = 0; i < chips; i++) {
506 /* Reset version information */
507 td->version[i] = 0;
508 td->pages[i] = -1;
509 /* Scan the maximum number of blocks */
510 for (block = 0; block < td->maxblocks; block++) {
511
512 int actblock = startblock + dir * block;
513 loff_t offs = (loff_t)actblock << this->bbt_erase_shift;
514
515 /* Read first page */
516 scan_read_raw(mtd, buf, offs, mtd->writesize);
517 if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
518 td->pages[i] = actblock << blocktopage;
519 if (td->options & NAND_BBT_VERSION) {
520 td->version[i] = buf[mtd->writesize + td->veroffs];
521 }
522 break;
523 }
524 }
525 startblock += this->chipsize >> this->bbt_erase_shift;
526 }
527 /* Check, if we found a bbt for each requested chip */
528 for (i = 0; i < chips; i++) {
529 if (td->pages[i] == -1)
530 printk(KERN_WARNING "Bad block table not found for chip %d\n", i);
531 else
532 printk(KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i],
533 td->version[i]);
534 }
535 return 0;
536 }
537
538 /**
539 * search_read_bbts - [GENERIC] scan the device for bad block table(s)
540 * @mtd: MTD device structure
541 * @buf: temporary buffer
542 * @td: descriptor for the bad block table
543 * @md: descriptor for the bad block table mirror
544 *
545 * Search and read the bad block table(s)
546 */
547 static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md)
548 {
549 /* Search the primary table */
550 search_bbt(mtd, buf, td);
551
552 /* Search the mirror table */
553 if (md)
554 search_bbt(mtd, buf, md);
555
556 /* Force result check */
557 return 1;
558 }
559
560 /**
561 * write_bbt - [GENERIC] (Re)write the bad block table
562 *
563 * @mtd: MTD device structure
564 * @buf: temporary buffer
565 * @td: descriptor for the bad block table
566 * @md: descriptor for the bad block table mirror
567 * @chipsel: selector for a specific chip, -1 for all
568 *
569 * (Re)write the bad block table
570 *
571 */
572 static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
573 struct nand_bbt_descr *td, struct nand_bbt_descr *md,
574 int chipsel)
575 {
576 struct nand_chip *this = mtd->priv;
577 struct erase_info einfo;
578 int i, j, res, chip = 0;
579 int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
580 int nrchips, bbtoffs, pageoffs, ooboffs;
581 uint8_t msk[4];
582 uint8_t rcode = td->reserved_block_code;
583 size_t retlen, len = 0;
584 loff_t to;
585 struct mtd_oob_ops ops;
586
587 ops.ooblen = mtd->oobsize;
588 ops.ooboffs = 0;
589 ops.datbuf = NULL;
590 ops.mode = MTD_OOB_PLACE;
591
592 if (!rcode)
593 rcode = 0xff;
594 /* Write bad block table per chip rather than per device ? */
595 if (td->options & NAND_BBT_PERCHIP) {
596 numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
597 /* Full device write or specific chip ? */
598 if (chipsel == -1) {
599 nrchips = this->numchips;
600 } else {
601 nrchips = chipsel + 1;
602 chip = chipsel;
603 }
604 } else {
605 numblocks = (int)(mtd->size >> this->bbt_erase_shift);
606 nrchips = 1;
607 }
608
609 /* Loop through the chips */
610 for (; chip < nrchips; chip++) {
611
612 /* There was already a version of the table, reuse the page
613 * This applies for absolute placement too, as we have the
614 * page nr. in td->pages.
615 */
616 if (td->pages[chip] != -1) {
617 page = td->pages[chip];
618 goto write;
619 }
620
621 /* Automatic placement of the bad block table */
622 /* Search direction top -> down ? */
623 if (td->options & NAND_BBT_LASTBLOCK) {
624 startblock = numblocks * (chip + 1) - 1;
625 dir = -1;
626 } else {
627 startblock = chip * numblocks;
628 dir = 1;
629 }
630
631 for (i = 0; i < td->maxblocks; i++) {
632 int block = startblock + dir * i;
633 /* Check, if the block is bad */
634 switch ((this->bbt[block >> 2] >>
635 (2 * (block & 0x03))) & 0x03) {
636 case 0x01:
637 case 0x03:
638 continue;
639 }
640 page = block <<
641 (this->bbt_erase_shift - this->page_shift);
642 /* Check, if the block is used by the mirror table */
643 if (!md || md->pages[chip] != page)
644 goto write;
645 }
646 printk(KERN_ERR "No space left to write bad block table\n");
647 return -ENOSPC;
648 write:
649
650 /* Set up shift count and masks for the flash table */
651 bits = td->options & NAND_BBT_NRBITS_MSK;
652 msk[2] = ~rcode;
653 switch (bits) {
654 case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01;
655 msk[3] = 0x01;
656 break;
657 case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01;
658 msk[3] = 0x03;
659 break;
660 case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C;
661 msk[3] = 0x0f;
662 break;
663 case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F;
664 msk[3] = 0xff;
665 break;
666 default: return -EINVAL;
667 }
668
669 bbtoffs = chip * (numblocks >> 2);
670
671 to = ((loff_t) page) << this->page_shift;
672
673 /* Must we save the block contents ? */
674 if (td->options & NAND_BBT_SAVECONTENT) {
675 /* Make it block aligned */
676 to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
677 len = 1 << this->bbt_erase_shift;
678 res = mtd->read(mtd, to, len, &retlen, buf);
679 if (res < 0) {
680 if (retlen != len) {
681 printk(KERN_INFO "nand_bbt: Error "
682 "reading block for writing "
683 "the bad block table\n");
684 return res;
685 }
686 printk(KERN_WARNING "nand_bbt: ECC error "
687 "while reading block for writing "
688 "bad block table\n");
689 }
690 /* Read oob data */
691 ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
692 ops.oobbuf = &buf[len];
693 res = mtd->read_oob(mtd, to + mtd->writesize, &ops);
694 if (res < 0 || ops.oobretlen != ops.ooblen)
695 goto outerr;
696
697 /* Calc the byte offset in the buffer */
698 pageoffs = page - (int)(to >> this->page_shift);
699 offs = pageoffs << this->page_shift;
700 /* Preset the bbt area with 0xff */
701 memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
702 ooboffs = len + (pageoffs * mtd->oobsize);
703
704 } else {
705 /* Calc length */
706 len = (size_t) (numblocks >> sft);
707 /* Make it page aligned ! */
708 len = (len + (mtd->writesize - 1)) &
709 ~(mtd->writesize - 1);
710 /* Preset the buffer with 0xff */
711 memset(buf, 0xff, len +
712 (len >> this->page_shift)* mtd->oobsize);
713 offs = 0;
714 ooboffs = len;
715 /* Pattern is located in oob area of first page */
716 memcpy(&buf[ooboffs + td->offs], td->pattern, td->len);
717 }
718
719 if (td->options & NAND_BBT_VERSION)
720 buf[ooboffs + td->veroffs] = td->version[chip];
721
722 /* walk through the memory table */
723 for (i = 0; i < numblocks;) {
724 uint8_t dat;
725 dat = this->bbt[bbtoffs + (i >> 2)];
726 for (j = 0; j < 4; j++, i++) {
727 int sftcnt = (i << (3 - sft)) & sftmsk;
728 /* Do not store the reserved bbt blocks ! */
729 buf[offs + (i >> sft)] &=
730 ~(msk[dat & 0x03] << sftcnt);
731 dat >>= 2;
732 }
733 }
734
735 memset(&einfo, 0, sizeof(einfo));
736 einfo.mtd = mtd;
737 einfo.addr = to;
738 einfo.len = 1 << this->bbt_erase_shift;
739 res = nand_erase_nand(mtd, &einfo, 1);
740 if (res < 0)
741 goto outerr;
742
743 res = scan_write_bbt(mtd, to, len, buf, &buf[len]);
744 if (res < 0)
745 goto outerr;
746
747 printk(KERN_DEBUG "Bad block table written to 0x%012llx, "
748 "version 0x%02X\n", (unsigned long long)to,
749 td->version[chip]);
750
751 /* Mark it as used */
752 td->pages[chip] = page;
753 }
754 return 0;
755
756 outerr:
757 printk(KERN_WARNING
758 "nand_bbt: Error while writing bad block table %d\n", res);
759 return res;
760 }
761
762 /**
763 * nand_memory_bbt - [GENERIC] create a memory based bad block table
764 * @mtd: MTD device structure
765 * @bd: descriptor for the good/bad block search pattern
766 *
767 * The function creates a memory based bbt by scanning the device
768 * for manufacturer / software marked good / bad blocks
769 */
770 static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
771 {
772 struct nand_chip *this = mtd->priv;
773
774 bd->options &= ~NAND_BBT_SCANEMPTY;
775 return create_bbt(mtd, this->buffers->databuf, bd, -1);
776 }
777
778 /**
779 * check_create - [GENERIC] create and write bbt(s) if necessary
780 * @mtd: MTD device structure
781 * @buf: temporary buffer
782 * @bd: descriptor for the good/bad block search pattern
783 *
784 * The function checks the results of the previous call to read_bbt
785 * and creates / updates the bbt(s) if necessary
786 * Creation is necessary if no bbt was found for the chip/device
787 * Update is necessary if one of the tables is missing or the
788 * version nr. of one table is less than the other
789 */
790 static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
791 {
792 int i, chips, writeops, chipsel, res;
793 struct nand_chip *this = mtd->priv;
794 struct nand_bbt_descr *td = this->bbt_td;
795 struct nand_bbt_descr *md = this->bbt_md;
796 struct nand_bbt_descr *rd, *rd2;
797
798 /* Do we have a bbt per chip ? */
799 if (td->options & NAND_BBT_PERCHIP)
800 chips = this->numchips;
801 else
802 chips = 1;
803
804 for (i = 0; i < chips; i++) {
805 writeops = 0;
806 rd = NULL;
807 rd2 = NULL;
808 /* Per chip or per device ? */
809 chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
810 /* Mirrored table avilable ? */
811 if (md) {
812 if (td->pages[i] == -1 && md->pages[i] == -1) {
813 writeops = 0x03;
814 goto create;
815 }
816
817 if (td->pages[i] == -1) {
818 rd = md;
819 td->version[i] = md->version[i];
820 writeops = 1;
821 goto writecheck;
822 }
823
824 if (md->pages[i] == -1) {
825 rd = td;
826 md->version[i] = td->version[i];
827 writeops = 2;
828 goto writecheck;
829 }
830
831 if (td->version[i] == md->version[i]) {
832 rd = td;
833 if (!(td->options & NAND_BBT_VERSION))
834 rd2 = md;
835 goto writecheck;
836 }
837
838 if (((int8_t) (td->version[i] - md->version[i])) > 0) {
839 rd = td;
840 md->version[i] = td->version[i];
841 writeops = 2;
842 } else {
843 rd = md;
844 td->version[i] = md->version[i];
845 writeops = 1;
846 }
847
848 goto writecheck;
849
850 } else {
851 if (td->pages[i] == -1) {
852 writeops = 0x01;
853 goto create;
854 }
855 rd = td;
856 goto writecheck;
857 }
858 create:
859 /* Create the bad block table by scanning the device ? */
860 if (!(td->options & NAND_BBT_CREATE))
861 continue;
862
863 /* Create the table in memory by scanning the chip(s) */
864 create_bbt(mtd, buf, bd, chipsel);
865
866 td->version[i] = 1;
867 if (md)
868 md->version[i] = 1;
869 writecheck:
870 /* read back first ? */
871 if (rd)
872 read_abs_bbt(mtd, buf, rd, chipsel);
873 /* If they weren't versioned, read both. */
874 if (rd2)
875 read_abs_bbt(mtd, buf, rd2, chipsel);
876
877 /* Write the bad block table to the device ? */
878 if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
879 res = write_bbt(mtd, buf, td, md, chipsel);
880 if (res < 0)
881 return res;
882 }
883
884 /* Write the mirror bad block table to the device ? */
885 if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
886 res = write_bbt(mtd, buf, md, td, chipsel);
887 if (res < 0)
888 return res;
889 }
890 }
891 return 0;
892 }
893
894 /**
895 * mark_bbt_regions - [GENERIC] mark the bad block table regions
896 * @mtd: MTD device structure
897 * @td: bad block table descriptor
898 *
899 * The bad block table regions are marked as "bad" to prevent
900 * accidental erasures / writes. The regions are identified by
901 * the mark 0x02.
902 */
903 static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
904 {
905 struct nand_chip *this = mtd->priv;
906 int i, j, chips, block, nrblocks, update;
907 uint8_t oldval, newval;
908
909 /* Do we have a bbt per chip ? */
910 if (td->options & NAND_BBT_PERCHIP) {
911 chips = this->numchips;
912 nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
913 } else {
914 chips = 1;
915 nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
916 }
917
918 for (i = 0; i < chips; i++) {
919 if ((td->options & NAND_BBT_ABSPAGE) ||
920 !(td->options & NAND_BBT_WRITE)) {
921 if (td->pages[i] == -1)
922 continue;
923 block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
924 block <<= 1;
925 oldval = this->bbt[(block >> 3)];
926 newval = oldval | (0x2 << (block & 0x06));
927 this->bbt[(block >> 3)] = newval;
928 if ((oldval != newval) && td->reserved_block_code)
929 nand_update_bbt(mtd, (loff_t)block <<
930 (this->bbt_erase_shift - 1));
931 continue;
932 }
933 update = 0;
934 if (td->options & NAND_BBT_LASTBLOCK)
935 block = ((i + 1) * nrblocks) - td->maxblocks;
936 else
937 block = i * nrblocks;
938 block <<= 1;
939 for (j = 0; j < td->maxblocks; j++) {
940 oldval = this->bbt[(block >> 3)];
941 newval = oldval | (0x2 << (block & 0x06));
942 this->bbt[(block >> 3)] = newval;
943 if (oldval != newval)
944 update = 1;
945 block += 2;
946 }
947 /* If we want reserved blocks to be recorded to flash, and some
948 new ones have been marked, then we need to update the stored
949 bbts. This should only happen once. */
950 if (update && td->reserved_block_code)
951 nand_update_bbt(mtd, (loff_t)(block - 2) <<
952 (this->bbt_erase_shift - 1));
953 }
954 }
955
956 /**
957 * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
958 * @mtd: MTD device structure
959 * @bd: descriptor for the good/bad block search pattern
960 *
961 * The function checks, if a bad block table(s) is/are already
962 * available. If not it scans the device for manufacturer
963 * marked good / bad blocks and writes the bad block table(s) to
964 * the selected place.
965 *
966 * The bad block table memory is allocated here. It must be freed
967 * by calling the nand_free_bbt function.
968 *
969 */
970 int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
971 {
972 struct nand_chip *this = mtd->priv;
973 int len, res = 0;
974 uint8_t *buf;
975 struct nand_bbt_descr *td = this->bbt_td;
976 struct nand_bbt_descr *md = this->bbt_md;
977
978 len = mtd->size >> (this->bbt_erase_shift + 2);
979 /* Allocate memory (2bit per block) and clear the memory bad block table */
980 this->bbt = kzalloc(len, GFP_KERNEL);
981 if (!this->bbt) {
982 printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
983 return -ENOMEM;
984 }
985
986 /* If no primary table decriptor is given, scan the device
987 * to build a memory based bad block table
988 */
989 if (!td) {
990 if ((res = nand_memory_bbt(mtd, bd))) {
991 printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
992 kfree(this->bbt);
993 this->bbt = NULL;
994 }
995 return res;
996 }
997
998 /* Allocate a temporary buffer for one eraseblock incl. oob */
999 len = (1 << this->bbt_erase_shift);
1000 len += (len >> this->page_shift) * mtd->oobsize;
1001 buf = vmalloc(len);
1002 if (!buf) {
1003 printk(KERN_ERR "nand_bbt: Out of memory\n");
1004 kfree(this->bbt);
1005 this->bbt = NULL;
1006 return -ENOMEM;
1007 }
1008
1009 /* Is the bbt at a given page ? */
1010 if (td->options & NAND_BBT_ABSPAGE) {
1011 res = read_abs_bbts(mtd, buf, td, md);
1012 } else {
1013 /* Search the bad block table using a pattern in oob */
1014 res = search_read_bbts(mtd, buf, td, md);
1015 }
1016
1017 if (res)
1018 res = check_create(mtd, buf, bd);
1019
1020 /* Prevent the bbt regions from erasing / writing */
1021 mark_bbt_region(mtd, td);
1022 if (md)
1023 mark_bbt_region(mtd, md);
1024
1025 vfree(buf);
1026 return res;
1027 }
1028
1029 /**
1030 * nand_update_bbt - [NAND Interface] update bad block table(s)
1031 * @mtd: MTD device structure
1032 * @offs: the offset of the newly marked block
1033 *
1034 * The function updates the bad block table(s)
1035 */
1036 int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
1037 {
1038 struct nand_chip *this = mtd->priv;
1039 int len, res = 0, writeops = 0;
1040 int chip, chipsel;
1041 uint8_t *buf;
1042 struct nand_bbt_descr *td = this->bbt_td;
1043 struct nand_bbt_descr *md = this->bbt_md;
1044
1045 if (!this->bbt || !td)
1046 return -EINVAL;
1047
1048 /* Allocate a temporary buffer for one eraseblock incl. oob */
1049 len = (1 << this->bbt_erase_shift);
1050 len += (len >> this->page_shift) * mtd->oobsize;
1051 buf = kmalloc(len, GFP_KERNEL);
1052 if (!buf) {
1053 printk(KERN_ERR "nand_update_bbt: Out of memory\n");
1054 return -ENOMEM;
1055 }
1056
1057 writeops = md != NULL ? 0x03 : 0x01;
1058
1059 /* Do we have a bbt per chip ? */
1060 if (td->options & NAND_BBT_PERCHIP) {
1061 chip = (int)(offs >> this->chip_shift);
1062 chipsel = chip;
1063 } else {
1064 chip = 0;
1065 chipsel = -1;
1066 }
1067
1068 td->version[chip]++;
1069 if (md)
1070 md->version[chip]++;
1071
1072 /* Write the bad block table to the device ? */
1073 if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
1074 res = write_bbt(mtd, buf, td, md, chipsel);
1075 if (res < 0)
1076 goto out;
1077 }
1078 /* Write the mirror bad block table to the device ? */
1079 if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
1080 res = write_bbt(mtd, buf, md, td, chipsel);
1081 }
1082
1083 out:
1084 kfree(buf);
1085 return res;
1086 }
1087
1088 /* Define some generic bad / good block scan pattern which are used
1089 * while scanning a device for factory marked good / bad blocks. */
1090 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
1091
1092 static struct nand_bbt_descr smallpage_memorybased = {
1093 .options = NAND_BBT_SCAN2NDPAGE,
1094 .offs = 5,
1095 .len = 1,
1096 .pattern = scan_ff_pattern
1097 };
1098
1099 static struct nand_bbt_descr largepage_memorybased = {
1100 .options = 0,
1101 .offs = 0,
1102 .len = 2,
1103 .pattern = scan_ff_pattern
1104 };
1105
1106 static struct nand_bbt_descr smallpage_flashbased = {
1107 .options = NAND_BBT_SCAN2NDPAGE,
1108 .offs = 5,
1109 .len = 1,
1110 .pattern = scan_ff_pattern
1111 };
1112
1113 static struct nand_bbt_descr largepage_flashbased = {
1114 .options = NAND_BBT_SCAN2NDPAGE,
1115 .offs = 0,
1116 .len = 2,
1117 .pattern = scan_ff_pattern
1118 };
1119
1120 static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
1121
1122 static struct nand_bbt_descr agand_flashbased = {
1123 .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
1124 .offs = 0x20,
1125 .len = 6,
1126 .pattern = scan_agand_pattern
1127 };
1128
1129 /* Generic flash bbt decriptors
1130 */
1131 static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
1132 static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
1133
1134 static struct nand_bbt_descr bbt_main_descr = {
1135 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1136 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1137 .offs = 8,
1138 .len = 4,
1139 .veroffs = 12,
1140 .maxblocks = 4,
1141 .pattern = bbt_pattern
1142 };
1143
1144 static struct nand_bbt_descr bbt_mirror_descr = {
1145 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1146 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1147 .offs = 8,
1148 .len = 4,
1149 .veroffs = 12,
1150 .maxblocks = 4,
1151 .pattern = mirror_pattern
1152 };
1153
1154 /**
1155 * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
1156 * @mtd: MTD device structure
1157 *
1158 * This function selects the default bad block table
1159 * support for the device and calls the nand_scan_bbt function
1160 *
1161 */
1162 int nand_default_bbt(struct mtd_info *mtd)
1163 {
1164 struct nand_chip *this = mtd->priv;
1165
1166 /* Default for AG-AND. We must use a flash based
1167 * bad block table as the devices have factory marked
1168 * _good_ blocks. Erasing those blocks leads to loss
1169 * of the good / bad information, so we _must_ store
1170 * this information in a good / bad table during
1171 * startup
1172 */
1173 if (this->options & NAND_IS_AND) {
1174 /* Use the default pattern descriptors */
1175 if (!this->bbt_td) {
1176 this->bbt_td = &bbt_main_descr;
1177 this->bbt_md = &bbt_mirror_descr;
1178 }
1179 this->options |= NAND_USE_FLASH_BBT;
1180 return nand_scan_bbt(mtd, &agand_flashbased);
1181 }
1182
1183 /* Is a flash based bad block table requested ? */
1184 if (this->options & NAND_USE_FLASH_BBT) {
1185 /* Use the default pattern descriptors */
1186 if (!this->bbt_td) {
1187 this->bbt_td = &bbt_main_descr;
1188 this->bbt_md = &bbt_mirror_descr;
1189 }
1190 if (!this->badblock_pattern) {
1191 this->badblock_pattern = (mtd->writesize > 512) ? &largepage_flashbased : &smallpage_flashbased;
1192 }
1193 } else {
1194 this->bbt_td = NULL;
1195 this->bbt_md = NULL;
1196 if (!this->badblock_pattern) {
1197 this->badblock_pattern = (mtd->writesize > 512) ?
1198 &largepage_memorybased : &smallpage_memorybased;
1199 }
1200 }
1201 return nand_scan_bbt(mtd, this->badblock_pattern);
1202 }
1203
1204 /**
1205 * nand_isbad_bbt - [NAND Interface] Check if a block is bad
1206 * @mtd: MTD device structure
1207 * @offs: offset in the device
1208 * @allowbbt: allow access to bad block table region
1209 *
1210 */
1211 int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
1212 {
1213 struct nand_chip *this = mtd->priv;
1214 int block;
1215 uint8_t res;
1216
1217 /* Get block number * 2 */
1218 block = (int)(offs >> (this->bbt_erase_shift - 1));
1219 res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
1220
1221 MTDDEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: "
1222 "(block %d) 0x%02x\n", (unsigned int)offs, res, block >> 1);
1223
1224 switch ((int)res) {
1225 case 0x00:
1226 return 0;
1227 case 0x01:
1228 return 1;
1229 case 0x02:
1230 return allowbbt ? 0 : 1;
1231 }
1232 return 1;
1233 }
1234
1235 /* XXX U-BOOT XXX */
1236 #if 0
1237 EXPORT_SYMBOL(nand_scan_bbt);
1238 EXPORT_SYMBOL(nand_default_bbt);
1239 #endif