drivers/mtd/nand/vf610_nfc.c

   1 /*
   2  * Copyright 2009-2014 Freescale Semiconductor, Inc. and others
   3  *
   4  * Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver.
   5  * Ported to U-Boot by Stefan Agner
   6  * Based on RFC driver posted on Kernel Mailing list by Bill Pringlemeir
   7  * Jason ported to M54418TWR and MVFA5.
   8  * Authors: Stefan Agner <stefan.agner@toradex.com>
   9  *          Bill Pringlemeir <bpringlemeir@nbsps.com>
  10  *          Shaohui Xie <b21989@freescale.com>
  11  *          Jason Jin <Jason.jin@freescale.com>
  12  *
  13  * Based on original driver mpc5121_nfc.c.
  14  *
  15  * This is free software; you can redistribute it and/or modify it
  16  * under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * Limitations:
  21  * - Untested on MPC5125 and M54418.
  22  * - DMA not used.
  23  * - 2K pages or less.
  24  * - Only 2K page w. 64+OOB and hardware ECC.
  25  */
  26
  27 #include <common.h>
  28 #include <malloc.h>
  29
  30 #include <linux/mtd/mtd.h>
  31 #include <linux/mtd/nand.h>
  32 #include <linux/mtd/partitions.h>
  33
  34 #include <nand.h>
  35 #include <errno.h>
  36 #include <asm/io.h>
  37
  38 /* Register Offsets */
  39 #define NFC_FLASH_CMD1                  0x3F00
  40 #define NFC_FLASH_CMD2                  0x3F04
  41 #define NFC_COL_ADDR                    0x3F08
  42 #define NFC_ROW_ADDR                    0x3F0c
  43 #define NFC_ROW_ADDR_INC                0x3F14
  44 #define NFC_FLASH_STATUS1               0x3F18
  45 #define NFC_FLASH_STATUS2               0x3F1c
  46 #define NFC_CACHE_SWAP                  0x3F28
  47 #define NFC_SECTOR_SIZE                 0x3F2c
  48 #define NFC_FLASH_CONFIG                0x3F30
  49 #define NFC_IRQ_STATUS                  0x3F38
  50
  51 /* Addresses for NFC MAIN RAM BUFFER areas */
  52 #define NFC_MAIN_AREA(n)                ((n) *  0x1000)
  53
  54 #define PAGE_2K                         0x0800
  55 #define OOB_64                          0x0040
  56
  57 /*
  58  * NFC_CMD2[CODE] values. See section:
  59  *  - 31.4.7 Flash Command Code Description, Vybrid manual
  60  *  - 23.8.6 Flash Command Sequencer, MPC5125 manual
  61  *
  62  * Briefly these are bitmasks of controller cycles.
  63  */
  64 #define READ_PAGE_CMD_CODE              0x7EE0
  65 #define READ_ONFI_PARAM_CMD_CODE        0x4860
  66 #define PROGRAM_PAGE_CMD_CODE           0x7FC0
  67 #define ERASE_CMD_CODE                  0x4EC0
  68 #define READ_ID_CMD_CODE                0x4804
  69 #define RESET_CMD_CODE                  0x4040
  70 #define STATUS_READ_CMD_CODE            0x4068
  71
  72 /* NFC ECC mode define */
  73 #define ECC_BYPASS                      0
  74 #define ECC_45_BYTE                     6
  75 #define ECC_60_BYTE                     7
  76
  77 /*** Register Mask and bit definitions */
  78
  79 /* NFC_FLASH_CMD1 Field */
  80 #define CMD_BYTE2_MASK                          0xFF000000
  81 #define CMD_BYTE2_SHIFT                         24
  82
  83 /* NFC_FLASH_CM2 Field */
  84 #define CMD_BYTE1_MASK                          0xFF000000
  85 #define CMD_BYTE1_SHIFT                         24
  86 #define CMD_CODE_MASK                           0x00FFFF00
  87 #define CMD_CODE_SHIFT                          8
  88 #define BUFNO_MASK                              0x00000006
  89 #define BUFNO_SHIFT                             1
  90 #define START_BIT                               (1<<0)
  91
  92 /* NFC_COL_ADDR Field */
  93 #define COL_ADDR_MASK                           0x0000FFFF
  94 #define COL_ADDR_SHIFT                          0
  95
  96 /* NFC_ROW_ADDR Field */
  97 #define ROW_ADDR_MASK                           0x00FFFFFF
  98 #define ROW_ADDR_SHIFT                          0
  99 #define ROW_ADDR_CHIP_SEL_RB_MASK               0xF0000000
 100 #define ROW_ADDR_CHIP_SEL_RB_SHIFT              28
 101 #define ROW_ADDR_CHIP_SEL_MASK                  0x0F000000
 102 #define ROW_ADDR_CHIP_SEL_SHIFT                 24
 103
 104 /* NFC_FLASH_STATUS2 Field */
 105 #define STATUS_BYTE1_MASK                       0x000000FF
 106
 107 /* NFC_FLASH_CONFIG Field */
 108 #define CONFIG_ECC_SRAM_ADDR_MASK               0x7FC00000
 109 #define CONFIG_ECC_SRAM_ADDR_SHIFT              22
 110 #define CONFIG_ECC_SRAM_REQ_BIT                 (1<<21)
 111 #define CONFIG_DMA_REQ_BIT                      (1<<20)
 112 #define CONFIG_ECC_MODE_MASK                    0x000E0000
 113 #define CONFIG_ECC_MODE_SHIFT                   17
 114 #define CONFIG_FAST_FLASH_BIT                   (1<<16)
 115 #define CONFIG_16BIT                            (1<<7)
 116 #define CONFIG_BOOT_MODE_BIT                    (1<<6)
 117 #define CONFIG_ADDR_AUTO_INCR_BIT               (1<<5)
 118 #define CONFIG_BUFNO_AUTO_INCR_BIT              (1<<4)
 119 #define CONFIG_PAGE_CNT_MASK                    0xF
 120 #define CONFIG_PAGE_CNT_SHIFT                   0
 121
 122 /* NFC_IRQ_STATUS Field */
 123 #define IDLE_IRQ_BIT                            (1<<29)
 124 #define IDLE_EN_BIT                             (1<<20)
 125 #define CMD_DONE_CLEAR_BIT                      (1<<18)
 126 #define IDLE_CLEAR_BIT                          (1<<17)
 127
 128 #define NFC_TIMEOUT     (1000)
 129
 130 /* ECC status placed at end of buffers. */
 131 #define ECC_SRAM_ADDR   ((PAGE_2K+256-8) >> 3)
 132 #define ECC_STATUS_MASK 0x80
 133 #define ECC_ERR_COUNT   0x3F
 134
 135 /*
 136  * ECC status is stored at NFC_CFG[ECCADD] +4 for little-endian
 137  * and +7 for big-endian SOC.
 138  */
 139 #ifdef CONFIG_VF610
 140 #define ECC_OFFSET      4
 141 #else
 142 #define ECC_OFFSET      7
 143 #endif
 144
 145 struct vf610_nfc {
 146         struct mtd_info   *mtd;
 147         struct nand_chip   chip;
 148         void __iomem      *regs;
 149         uint               column;
 150         /* Status and ID are in alternate locations. */
 151         int                alt_buf;
 152 #define ALT_BUF_ID   1
 153 #define ALT_BUF_STAT 2
 154 #define ALT_BUF_ONFI 3
 155         struct clk        *clk;
 156 };
 157
 158 #define mtd_to_nfc(_mtd) \
 159         (struct vf610_nfc *)((struct nand_chip *)_mtd->priv)->priv
 160
 161 #if defined(CONFIG_SYS_NAND_VF610_NFC_45_ECC_BYTES)
 162 #define ECC_HW_MODE ECC_45_BYTE
 163
 164 static struct nand_ecclayout vf610_nfc_ecc = {
 165         .eccbytes = 45,
 166         .eccpos = {19, 20, 21, 22, 23,
 167                    24, 25, 26, 27, 28, 29, 30, 31,
 168                    32, 33, 34, 35, 36, 37, 38, 39,
 169                    40, 41, 42, 43, 44, 45, 46, 47,
 170                    48, 49, 50, 51, 52, 53, 54, 55,
 171                    56, 57, 58, 59, 60, 61, 62, 63},
 172         .oobfree = {
 173                 {.offset = 8,
 174                  .length = 11} }
 175 };
 176 #elif defined(CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES)
 177 #define ECC_HW_MODE ECC_60_BYTE
 178
 179 static struct nand_ecclayout vf610_nfc_ecc = {
 180         .eccbytes = 60,
 181         .eccpos = { 4,  5,  6,  7,  8,  9, 10, 11,
 182                    12, 13, 14, 15, 16, 17, 18, 19,
 183                    20, 21, 22, 23, 24, 25, 26, 27,
 184                    28, 29, 30, 31, 32, 33, 34, 35,
 185                    36, 37, 38, 39, 40, 41, 42, 43,
 186                    44, 45, 46, 47, 48, 49, 50, 51,
 187                    52, 53, 54, 55, 56, 57, 58, 59,
 188                    60, 61, 62, 63 },
 189         .oobfree = {
 190                 {.offset = 2,
 191                  .length = 2} }
 192 };
 193 #endif
 194
 195 static inline u32 vf610_nfc_read(struct mtd_info *mtd, uint reg)
 196 {
 197         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 198
 199         return readl(nfc->regs + reg);
 200 }
 201
 202 static inline void vf610_nfc_write(struct mtd_info *mtd, uint reg, u32 val)
 203 {
 204         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 205
 206         writel(val, nfc->regs + reg);
 207 }
 208
 209 static inline void vf610_nfc_set(struct mtd_info *mtd, uint reg, u32 bits)
 210 {
 211         vf610_nfc_write(mtd, reg, vf610_nfc_read(mtd, reg) | bits);
 212 }
 213
 214 static inline void vf610_nfc_clear(struct mtd_info *mtd, uint reg, u32 bits)
 215 {
 216         vf610_nfc_write(mtd, reg, vf610_nfc_read(mtd, reg) & ~bits);
 217 }
 218
 219 static inline void vf610_nfc_set_field(struct mtd_info *mtd, u32 reg,
 220                                        u32 mask, u32 shift, u32 val)
 221 {
 222         vf610_nfc_write(mtd, reg,
 223                         (vf610_nfc_read(mtd, reg) & (~mask)) | val << shift);
 224 }
 225
 226 static inline void vf610_nfc_memcpy(void *dst, const void *src, size_t n)
 227 {
 228         /*
 229          * Use this accessor for the interal SRAM buffers. On ARM we can
 230          * treat the SRAM buffer as if its memory, hence use memcpy
 231          */
 232         memcpy(dst, src, n);
 233 }
 234
 235 /* Clear flags for upcoming command */
 236 static inline void vf610_nfc_clear_status(void __iomem *regbase)
 237 {
 238         void __iomem *reg = regbase + NFC_IRQ_STATUS;
 239         u32 tmp = __raw_readl(reg);
 240         tmp |= CMD_DONE_CLEAR_BIT | IDLE_CLEAR_BIT;
 241         __raw_writel(tmp, reg);
 242 }
 243
 244 /* Wait for complete operation */
 245 static inline void vf610_nfc_done(struct mtd_info *mtd)
 246 {
 247         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 248         uint start;
 249
 250         /*
 251          * Barrier is needed after this write. This write need
 252          * to be done before reading the next register the first
 253          * time.
 254          * vf610_nfc_set implicates such a barrier by using writel
 255          * to write to the register.
 256          */
 257         vf610_nfc_set(mtd, NFC_FLASH_CMD2, START_BIT);
 258
 259         start = get_timer(0);
 260
 261         while (!(vf610_nfc_read(mtd, NFC_IRQ_STATUS) & IDLE_IRQ_BIT)) {
 262                 if (get_timer(start) > NFC_TIMEOUT) {
 263                         printf("Timeout while waiting for !BUSY.\n");
 264                         return;
 265                 }
 266         }
 267         vf610_nfc_clear_status(nfc->regs);
 268 }
 269
 270 static u8 vf610_nfc_get_id(struct mtd_info *mtd, int col)
 271 {
 272         u32 flash_id;
 273
 274         if (col < 4) {
 275                 flash_id = vf610_nfc_read(mtd, NFC_FLASH_STATUS1);
 276                 return (flash_id >> (3-col)*8) & 0xff;
 277         } else {
 278                 flash_id = vf610_nfc_read(mtd, NFC_FLASH_STATUS2);
 279                 return flash_id >> 24;
 280         }
 281 }
 282
 283 static u8 vf610_nfc_get_status(struct mtd_info *mtd)
 284 {
 285         return vf610_nfc_read(mtd, NFC_FLASH_STATUS2) & STATUS_BYTE1_MASK;
 286 }
 287
 288 /* Single command */
 289 static void vf610_nfc_send_command(void __iomem *regbase, u32 cmd_byte1,
 290                                    u32 cmd_code)
 291 {
 292         void __iomem *reg = regbase + NFC_FLASH_CMD2;
 293         u32 tmp;
 294         vf610_nfc_clear_status(regbase);
 295
 296         tmp = __raw_readl(reg);
 297         tmp &= ~(CMD_BYTE1_MASK | CMD_CODE_MASK | BUFNO_MASK);
 298         tmp |= cmd_byte1 << CMD_BYTE1_SHIFT;
 299         tmp |= cmd_code << CMD_CODE_SHIFT;
 300         __raw_writel(tmp, reg);
 301 }
 302
 303 /* Two commands */
 304 static void vf610_nfc_send_commands(void __iomem *regbase, u32 cmd_byte1,
 305                               u32 cmd_byte2, u32 cmd_code)
 306 {
 307         void __iomem *reg = regbase + NFC_FLASH_CMD1;
 308         u32 tmp;
 309         vf610_nfc_send_command(regbase, cmd_byte1, cmd_code);
 310
 311         tmp = __raw_readl(reg);
 312         tmp &= ~CMD_BYTE2_MASK;
 313         tmp |= cmd_byte2 << CMD_BYTE2_SHIFT;
 314         __raw_writel(tmp, reg);
 315 }
 316
 317 static void vf610_nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
 318 {
 319         if (column != -1) {
 320                 struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 321                 if (nfc->chip.options & NAND_BUSWIDTH_16)
 322                         column = column / 2;
 323                 vf610_nfc_set_field(mtd, NFC_COL_ADDR, COL_ADDR_MASK,
 324                                     COL_ADDR_SHIFT, column);
 325         }
 326         if (page != -1)
 327                 vf610_nfc_set_field(mtd, NFC_ROW_ADDR, ROW_ADDR_MASK,
 328                                     ROW_ADDR_SHIFT, page);
 329 }
 330
 331 static inline void vf610_nfc_ecc_mode(struct mtd_info *mtd, int ecc_mode)
 332 {
 333         vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG,
 334                             CONFIG_ECC_MODE_MASK,
 335                             CONFIG_ECC_MODE_SHIFT, ecc_mode);
 336 }
 337
 338 static inline void vf610_nfc_transfer_size(void __iomem *regbase, int size)
 339 {
 340         __raw_writel(size, regbase + NFC_SECTOR_SIZE);
 341 }
 342
 343 /* Send command to NAND chip */
 344 static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 345                               int column, int page)
 346 {
 347         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 348         int page_sz = nfc->chip.options & NAND_BUSWIDTH_16 ? 1 : 0;
 349
 350         nfc->column = max(column, 0);
 351         nfc->alt_buf = 0;
 352
 353         switch (command) {
 354         case NAND_CMD_SEQIN:
 355                 /* Use valid column/page from preread... */
 356                 vf610_nfc_addr_cycle(mtd, column, page);
 357                 /*
 358                  * SEQIN => data => PAGEPROG sequence is done by the controller
 359                  * hence we do not need to issue the command here...
 360                  */
 361                 return;
 362         case NAND_CMD_PAGEPROG:
 363                 page_sz += mtd->writesize + mtd->oobsize;
 364                 vf610_nfc_transfer_size(nfc->regs, page_sz);
 365                 vf610_nfc_send_commands(nfc->regs, NAND_CMD_SEQIN,
 366                                         command, PROGRAM_PAGE_CMD_CODE);
 367                 vf610_nfc_ecc_mode(mtd, ECC_HW_MODE);
 368                 break;
 369
 370         case NAND_CMD_RESET:
 371                 vf610_nfc_transfer_size(nfc->regs, 0);
 372                 vf610_nfc_send_command(nfc->regs, command, RESET_CMD_CODE);
 373                 break;
 374
 375         case NAND_CMD_READOOB:
 376                 page_sz += mtd->oobsize;
 377                 column = mtd->writesize;
 378                 vf610_nfc_transfer_size(nfc->regs, page_sz);
 379                 vf610_nfc_send_commands(nfc->regs, NAND_CMD_READ0,
 380                                         NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
 381                 vf610_nfc_addr_cycle(mtd, column, page);
 382                 vf610_nfc_ecc_mode(mtd, ECC_BYPASS);
 383                 break;
 384
 385         case NAND_CMD_READ0:
 386                 page_sz += mtd->writesize + mtd->oobsize;
 387                 column = 0;
 388                 vf610_nfc_transfer_size(nfc->regs, page_sz);
 389                 vf610_nfc_send_commands(nfc->regs, NAND_CMD_READ0,
 390                                         NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
 391                 vf610_nfc_addr_cycle(mtd, column, page);
 392                 vf610_nfc_ecc_mode(mtd, ECC_HW_MODE);
 393                 break;
 394
 395         case NAND_CMD_PARAM:
 396                 nfc->alt_buf = ALT_BUF_ONFI;
 397                 vf610_nfc_transfer_size(nfc->regs, 768);
 398                 vf610_nfc_send_command(nfc->regs, NAND_CMD_PARAM,
 399                                        READ_ONFI_PARAM_CMD_CODE);
 400                 vf610_nfc_set_field(mtd, NFC_ROW_ADDR, ROW_ADDR_MASK,
 401                                     ROW_ADDR_SHIFT, column);
 402                 vf610_nfc_ecc_mode(mtd, ECC_BYPASS);
 403                 break;
 404
 405         case NAND_CMD_ERASE1:
 406                 vf610_nfc_transfer_size(nfc->regs, 0);
 407                 vf610_nfc_send_commands(nfc->regs, command,
 408                                         NAND_CMD_ERASE2, ERASE_CMD_CODE);
 409                 vf610_nfc_addr_cycle(mtd, column, page);
 410                 break;
 411
 412         case NAND_CMD_READID:
 413                 nfc->alt_buf = ALT_BUF_ID;
 414                 nfc->column = 0;
 415                 vf610_nfc_transfer_size(nfc->regs, 0);
 416                 vf610_nfc_send_command(nfc->regs, command, READ_ID_CMD_CODE);
 417                 vf610_nfc_set_field(mtd, NFC_ROW_ADDR, ROW_ADDR_MASK,
 418                                     ROW_ADDR_SHIFT, column);
 419                 break;
 420
 421         case NAND_CMD_STATUS:
 422                 nfc->alt_buf = ALT_BUF_STAT;
 423                 vf610_nfc_transfer_size(nfc->regs, 0);
 424                 vf610_nfc_send_command(nfc->regs, command,
 425                                        STATUS_READ_CMD_CODE);
 426                 break;
 427         default:
 428                 return;
 429         }
 430
 431         vf610_nfc_done(mtd);
 432 }
 433
 434 /* Read data from NFC buffers */
 435 static void vf610_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 436 {
 437         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 438         uint c = nfc->column;
 439
 440         /* Alternate buffers are only supported through read_byte */
 441         if (nfc->alt_buf)
 442                 return;
 443
 444         vf610_nfc_memcpy(buf, nfc->regs + NFC_MAIN_AREA(0) + c, len);
 445
 446         nfc->column += len;
 447 }
 448
 449 /* Write data to NFC buffers */
 450 static void vf610_nfc_write_buf(struct mtd_info *mtd, const u_char *buf,
 451                                 int len)
 452 {
 453         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 454         uint c = nfc->column;
 455         uint l;
 456
 457         l = min((uint)len, mtd->writesize + mtd->oobsize - c);
 458         nfc->column += l;
 459         vf610_nfc_memcpy(nfc->regs + NFC_MAIN_AREA(0) + c, buf, l);
 460 }
 461
 462 /* Read byte from NFC buffers */
 463 static u8 vf610_nfc_read_byte(struct mtd_info *mtd)
 464 {
 465         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 466         u8 tmp;
 467         uint c = nfc->column;
 468
 469         switch (nfc->alt_buf) {
 470         case ALT_BUF_ID:
 471                 tmp = vf610_nfc_get_id(mtd, c);
 472                 break;
 473         case ALT_BUF_STAT:
 474                 tmp = vf610_nfc_get_status(mtd);
 475                 break;
 476         case ALT_BUF_ONFI:
 477 #ifdef __LITTLE_ENDIAN
 478                 /* Reverse byte since the controller uses big endianness */
 479                 c = nfc->column ^ 0x3;
 480                 tmp = *((u8 *)(nfc->regs + NFC_MAIN_AREA(0) + c));
 481                 break;
 482 #endif
 483         default:
 484                 tmp = *((u8 *)(nfc->regs + NFC_MAIN_AREA(0) + c));
 485                 break;
 486         }
 487         nfc->column++;
 488         return tmp;
 489 }
 490
 491 /* Read word from NFC buffers */
 492 static u16 vf610_nfc_read_word(struct mtd_info *mtd)
 493 {
 494         u16 tmp;
 495         vf610_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
 496         return tmp;
 497 }
 498
 499 /* If not provided, upper layers apply a fixed delay. */
 500 static int vf610_nfc_dev_ready(struct mtd_info *mtd)
 501 {
 502         /* NFC handles R/B internally; always ready.  */
 503         return 1;
 504 }
 505
 506 /*
 507  * This function supports Vybrid only (MPC5125 would have full RB and four CS)
 508  */
 509 static void vf610_nfc_select_chip(struct mtd_info *mtd, int chip)
 510 {
 511 #ifdef CONFIG_VF610
 512         u32 tmp = vf610_nfc_read(mtd, NFC_ROW_ADDR);
 513         tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK);
 514         tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT;
 515
 516         if (chip == 0)
 517                 tmp |= 1 << ROW_ADDR_CHIP_SEL_SHIFT;
 518         else if (chip == 1)
 519                 tmp |= 2 << ROW_ADDR_CHIP_SEL_SHIFT;
 520
 521         vf610_nfc_write(mtd, NFC_ROW_ADDR, tmp);
 522 #endif
 523 }
 524
 525 /* Count the number of 0's in buff upto max_bits */
 526 static inline int count_written_bits(uint8_t *buff, int size, int max_bits)
 527 {
 528         uint32_t *buff32 = (uint32_t *)buff;
 529         int k, written_bits = 0;
 530
 531         for (k = 0; k < (size / 4); k++) {
 532                 written_bits += hweight32(~buff32[k]);
 533                 if (written_bits > max_bits)
 534                         break;
 535         }
 536
 537         return written_bits;
 538 }
 539
 540 static inline int vf610_nfc_correct_data(struct mtd_info *mtd, u_char *dat)
 541 {
 542         struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 543         u8 ecc_status;
 544         u8 ecc_count;
 545         int flip;
 546
 547         ecc_status = __raw_readb(nfc->regs + ECC_SRAM_ADDR * 8 + ECC_OFFSET);
 548         ecc_count = ecc_status & ECC_ERR_COUNT;
 549         if (!(ecc_status & ECC_STATUS_MASK))
 550                 return ecc_count;
 551
 552         /* If 'ecc_count' zero or less then buffer is all 0xff or erased. */
 553         flip = count_written_bits(dat, nfc->chip.ecc.size, ecc_count);
 554
 555         /* ECC failed. */
 556         if (flip > ecc_count && flip > (nfc->chip.ecc.strength / 2))
 557                 return -1;
 558
 559         /* Erased page. */
 560         memset(dat, 0xff, nfc->chip.ecc.size);
 561         return 0;
 562 }
 563
 564
 565 static int vf610_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 566                                 uint8_t *buf, int oob_required, int page)
 567 {
 568         int eccsize = chip->ecc.size;
 569         int stat;
 570         uint8_t *p = buf;
 571
 572
 573         vf610_nfc_read_buf(mtd, p, eccsize);
 574
 575         if (oob_required)
 576                 vf610_nfc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
 577
 578         stat = vf610_nfc_correct_data(mtd, p);
 579
 580         if (stat < 0)
 581                 mtd->ecc_stats.failed++;
 582         else
 583                 mtd->ecc_stats.corrected += stat;
 584
 585         return 0;
 586 }
 587
 588 /*
 589  * ECC will be calculated automatically
 590  */
 591 static int vf610_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 592                                const uint8_t *buf, int oob_required)
 593 {
 594         vf610_nfc_write_buf(mtd, buf, mtd->writesize);
 595         if (oob_required)
 596                 vf610_nfc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
 597
 598         return 0;
 599 }
 600
 601 struct vf610_nfc_config {
 602         int hardware_ecc;
 603         int width;
 604         int flash_bbt;
 605 };
 606
 607 static int vf610_nfc_nand_init(int devnum, void __iomem *addr)
 608 {
 609         struct mtd_info *mtd = &nand_info[devnum];
 610         struct nand_chip *chip;
 611         struct vf610_nfc *nfc;
 612         int err = 0;
 613         struct vf610_nfc_config cfg = {
 614                 .hardware_ecc = 1,
 615 #ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
 616                 .width = 16,
 617 #else
 618                 .width = 8,
 619 #endif
 620                 .flash_bbt = 1,
 621         };
 622
 623         nfc = malloc(sizeof(*nfc));
 624         if (!nfc) {
 625                 printf(KERN_ERR "%s: Memory exhausted!\n", __func__);
 626                 return -ENOMEM;
 627         }
 628
 629         chip = &nfc->chip;
 630         nfc->regs = addr;
 631
 632         mtd->priv = chip;
 633         chip->priv = nfc;
 634
 635         if (cfg.width == 16)
 636                 chip->options |= NAND_BUSWIDTH_16;
 637
 638         /* Use 8-bit mode during initialization */
 639         vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT);
 640
 641         /* Disable subpage writes as we do not provide ecc->hwctl */
 642         chip->options |= NAND_NO_SUBPAGE_WRITE;
 643
 644         chip->dev_ready = vf610_nfc_dev_ready;
 645         chip->cmdfunc = vf610_nfc_command;
 646         chip->read_byte = vf610_nfc_read_byte;
 647         chip->read_word = vf610_nfc_read_word;
 648         chip->read_buf = vf610_nfc_read_buf;
 649         chip->write_buf = vf610_nfc_write_buf;
 650         chip->select_chip = vf610_nfc_select_chip;
 651
 652         /* Bad block options. */
 653         if (cfg.flash_bbt)
 654                 chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB |
 655                                     NAND_BBT_CREATE;
 656
 657         /* Set configuration register. */
 658         vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT);
 659         vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT);
 660         vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT);
 661         vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT);
 662         vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT);
 663
 664         /* Enable Idle IRQ */
 665         vf610_nfc_set(mtd, NFC_IRQ_STATUS, IDLE_EN_BIT);
 666
 667         /* PAGE_CNT = 1 */
 668         vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK,
 669                             CONFIG_PAGE_CNT_SHIFT, 1);
 670
 671         /* Set ECC_STATUS offset */
 672         vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG,
 673                             CONFIG_ECC_SRAM_ADDR_MASK,
 674                             CONFIG_ECC_SRAM_ADDR_SHIFT, ECC_SRAM_ADDR);
 675
 676         /* first scan to find the device and get the page size */
 677         if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL)) {
 678                 err = -ENXIO;
 679                 goto error;
 680         }
 681
 682         if (cfg.width == 16)
 683                 vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT);
 684
 685         chip->ecc.mode = NAND_ECC_SOFT; /* default */
 686
 687         /* Single buffer only, max 256 OOB minus ECC status */
 688         if (mtd->writesize + mtd->oobsize > PAGE_2K + 256 - 8) {
 689                 dev_err(nfc->dev, "Unsupported flash size\n");
 690                 err = -ENXIO;
 691                 goto error;
 692         }
 693
 694         if (cfg.hardware_ecc) {
 695                 if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
 696                         dev_err(nfc->dev, "Unsupported flash with hwecc\n");
 697                         err = -ENXIO;
 698                         goto error;
 699                 }
 700
 701                 /* Current HW ECC layouts only use 64 bytes of OOB */
 702                 if (mtd->oobsize > 64)
 703                         mtd->oobsize = 64;
 704
 705                 /* propagate ecc.layout to mtd_info */
 706                 mtd->ecclayout = chip->ecc.layout;
 707                 chip->ecc.read_page = vf610_nfc_read_page;
 708                 chip->ecc.write_page = vf610_nfc_write_page;
 709                 chip->ecc.mode = NAND_ECC_HW;
 710
 711                 chip->ecc.size = PAGE_2K;
 712                 chip->ecc.layout = &vf610_nfc_ecc;
 713 #if defined(CONFIG_SYS_NAND_VF610_NFC_45_ECC_BYTES)
 714                 chip->ecc.strength = 24;
 715                 chip->ecc.bytes = 45;
 716 #elif defined(CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES)
 717                 chip->ecc.strength = 32;
 718                 chip->ecc.bytes = 60;
 719 #endif
 720
 721                 /* Enable ECC_STATUS */
 722                 vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT);
 723         }
 724
 725         /* second phase scan */
 726         err = nand_scan_tail(mtd);
 727         if (err)
 728                 return err;
 729
 730         err = nand_register(devnum);
 731         if (err)
 732                 return err;
 733
 734         return 0;
 735
 736 error:
 737         return err;
 738 }
 739
 740 void board_nand_init(void)
 741 {
 742         int err = vf610_nfc_nand_init(0, (void __iomem *)CONFIG_SYS_NAND_BASE);
 743         if (err)
 744                 printf("VF610 NAND init failed (err %d)\n", err);
 745 }