drivers/net/Kconfig

   1 config DM_ETH
   2         bool "Enable Driver Model for Ethernet drivers"
   3         depends on DM
   4         help
   5           Enable driver model for Ethernet.
   6
   7           The eth_*() interface will be implemented by the UC_ETH class
   8           This is currently implemented in net/eth.c
   9           Look in include/net.h for details.
  10
  11 config PHYLIB
  12         bool "Ethernet PHY (physical media interface) support"
  13         help
  14           Enable Ethernet PHY (physical media interface) support.
  15
  16 config RTL8211X_PHY_FORCE_MASTER
  17         bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
  18         depends on PHYLIB
  19         help
  20           Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
  21           This can work around link stability and data corruption issues on gigabit
  22           links which can occur in slave mode on certain PHYs, e.g. on the
  23           RTL8211C(L).
  24
  25           Please note that two directly connected devices (i.e. via crossover cable)
  26           will not be able to establish a link between each other if they both force
  27           master mode. Multiple devices forcing master mode when connected by a
  28           network switch do not pose a problem as the switch configures its affected
  29           ports into slave mode.
  30
  31           This option only affects gigabit links. If you must establish a direct
  32           connection between two devices which both force master mode, try forcing
  33           the link speed to 100MBit/s.
  34
  35           If unsure, say N.
  36
  37 menuconfig NETDEVICES
  38         bool "Network device support"
  39         depends on NET
  40         default y if DM_ETH
  41         help
  42           You must select Y to enable any network device support
  43           Generally if you have any networking support this is a given
  44
  45           If unsure, say Y
  46
  47 if NETDEVICES
  48
  49 config AG7XXX
  50         bool "Atheros AG7xxx Ethernet MAC support"
  51         depends on DM_ETH && ARCH_ATH79
  52         select PHYLIB
  53         help
  54           This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
  55           present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
  56
  57
  58 config ALTERA_TSE
  59         bool "Altera Triple-Speed Ethernet MAC support"
  60         depends on DM_ETH
  61         select PHYLIB
  62         help
  63           This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
  64           Please find details on the "Triple-Speed Ethernet MegaCore Function
  65           Resource Center" of Altera.
  66
  67 config E1000
  68         bool "Intel PRO/1000 Gigabit Ethernet support"
  69         help
  70           This driver supports Intel(R) PRO/1000 gigabit ethernet family of
  71           adapters.  For more information on how to identify your adapter, go
  72           to the Adapter & Driver ID Guide at:
  73
  74           <http://support.intel.com/support/network/adapter/pro100/21397.htm>
  75
  76 config E1000_SPI_GENERIC
  77         bool "Allow access to the Intel 8257x SPI bus"
  78         depends on E1000
  79         help
  80           Allow generic access to the SPI bus on the Intel 8257x, for
  81           example with the "sspi" command.
  82
  83 config E1000_SPI
  84         bool "Enable SPI bus utility code"
  85         depends on E1000
  86         help
  87           Utility code for direct access to the SPI bus on Intel 8257x.
  88           This does not do anything useful unless you set at least one
  89           of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
  90
  91 config CMD_E1000
  92         bool "Enable the e1000 command"
  93         depends on E1000
  94         help
  95           This enables the 'e1000' management command for E1000 devices. When
  96           used on devices with SPI support you can reprogram the EEPROM from
  97           U-Boot.
  98
  99 config ETH_SANDBOX
 100         depends on DM_ETH && SANDBOX
 101         default y
 102         bool "Sandbox: Mocked Ethernet driver"
 103         help
 104           This driver simply responds with fake ARP replies and ping
 105           replies that are used to verify network stack functionality
 106
 107           This driver is particularly useful in the test/dm/eth.c tests
 108
 109 config ETH_SANDBOX_RAW
 110         depends on DM_ETH && SANDBOX
 111         default y
 112         bool "Sandbox: Bridge to Linux Raw Sockets"
 113         help
 114           This driver is a bridge from the bottom of the network stack
 115           in U-Boot to the RAW AF_PACKET API in Linux. This allows real
 116           network traffic to be tested from within sandbox. See
 117           board/sandbox/README.sandbox for more details.
 118
 119 config ETH_DESIGNWARE
 120         bool "Synopsys Designware Ethernet MAC"
 121         select PHYLIB
 122         help
 123           This MAC is present in SoCs from various vendors. It supports
 124           100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
 125           provide the PHY (physical media interface).
 126
 127 config MVPP2
 128         bool "Marvell Armada 375 network interface support"
 129         depends on ARMADA_375
 130         select PHYLIB
 131         help
 132           This driver supports the network interface units in the
 133           Marvell ARMADA 375 SoC.
 134
 135 config PCH_GBE
 136         bool "Intel Platform Controller Hub EG20T GMAC driver"
 137         depends on DM_ETH && DM_PCI
 138         select PHYLIB
 139         help
 140           This MAC is present in Intel Platform Controller Hub EG20T. It
 141           supports 10/100/1000 Mbps operation.
 142
 143 config RTL8139
 144         bool "Realtek 8139 series Ethernet controller driver"
 145         help
 146           This driver supports Realtek 8139 series fast ethernet family of
 147           PCI chipsets/adapters.
 148
 149 config RTL8169
 150         bool "Realtek 8169 series Ethernet controller driver"
 151         help
 152           This driver supports Realtek 8169 series gigabit ethernet family of
 153           PCI/PCIe chipsets/adapters.
 154
 155 config SUN8I_EMAC
 156         bool "Allwinner Sun8i Ethernet MAC support"
 157         depends on DM_ETH
 158         select PHYLIB
 159         help
 160           This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
 161           It can be found in H3/A64/A83T based SoCs and compatible with both
 162           External and Internal PHY's.
 163
 164 config XILINX_AXIEMAC
 165         depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
 166         select PHYLIB
 167         select MII
 168         bool "Xilinx AXI Ethernet"
 169         help
 170           This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
 171
 172 config XILINX_EMACLITE
 173         depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
 174         select PHYLIB
 175         select MII
 176         bool "Xilinx Ethernetlite"
 177         help
 178           This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
 179
 180 config ZYNQ_GEM
 181         depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
 182         select PHYLIB
 183         bool "Xilinx Ethernet GEM"
 184         help
 185           This MAC is present in Xilinx Zynq and ZynqMP SoCs.
 186
 187 config PIC32_ETH
 188         bool "Microchip PIC32 Ethernet Support"
 189         depends on DM_ETH && MACH_PIC32
 190         select PHYLIB
 191         help
 192           This driver implements 10/100 Mbps Ethernet and MAC layer for
 193           Microchip PIC32 microcontrollers.
 194
 195 endif # NETDEVICES