]> git.ipfire.org Git - people/ms/u-boot.git/blob - drivers/net/Kconfig
nds32: eth: Support ftmac100 DM.
[people/ms/u-boot.git] / drivers / net / Kconfig
1 source "drivers/net/phy/Kconfig"
2
3 config DM_ETH
4 bool "Enable Driver Model for Ethernet drivers"
5 depends on DM
6 help
7 Enable driver model for Ethernet.
8
9 The eth_*() interface will be implemented by the UC_ETH class
10 This is currently implemented in net/eth.c
11 Look in include/net.h for details.
12
13 menuconfig NETDEVICES
14 bool "Network device support"
15 depends on NET
16 default y if DM_ETH
17 help
18 You must select Y to enable any network device support
19 Generally if you have any networking support this is a given
20
21 If unsure, say Y
22
23 if NETDEVICES
24
25 config AG7XXX
26 bool "Atheros AG7xxx Ethernet MAC support"
27 depends on DM_ETH && ARCH_ATH79
28 select PHYLIB
29 help
30 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
31 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
32
33
34 config ALTERA_TSE
35 bool "Altera Triple-Speed Ethernet MAC support"
36 depends on DM_ETH
37 select PHYLIB
38 help
39 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
40 Please find details on the "Triple-Speed Ethernet MegaCore Function
41 Resource Center" of Altera.
42
43 config DWC_ETH_QOS
44 bool "Synopsys DWC Ethernet QOS device support"
45 depends on DM_ETH
46 select PHYLIB
47 help
48 This driver supports the Synopsys Designware Ethernet QOS (Quality
49 Of Service) IP block. The IP supports many options for bus type,
50 clocking/reset structure, and feature list. This driver currently
51 supports the specific configuration used in NVIDIA's Tegra186 chip,
52 but should be extensible to other combinations quite easily.
53
54 config E1000
55 bool "Intel PRO/1000 Gigabit Ethernet support"
56 help
57 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
58 adapters. For more information on how to identify your adapter, go
59 to the Adapter & Driver ID Guide at:
60
61 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
62
63 config E1000_SPI_GENERIC
64 bool "Allow access to the Intel 8257x SPI bus"
65 depends on E1000
66 help
67 Allow generic access to the SPI bus on the Intel 8257x, for
68 example with the "sspi" command.
69
70 config E1000_SPI
71 bool "Enable SPI bus utility code"
72 depends on E1000
73 help
74 Utility code for direct access to the SPI bus on Intel 8257x.
75 This does not do anything useful unless you set at least one
76 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
77
78 config CMD_E1000
79 bool "Enable the e1000 command"
80 depends on E1000
81 help
82 This enables the 'e1000' management command for E1000 devices. When
83 used on devices with SPI support you can reprogram the EEPROM from
84 U-Boot.
85
86 config ETH_SANDBOX
87 depends on DM_ETH && SANDBOX
88 default y
89 bool "Sandbox: Mocked Ethernet driver"
90 help
91 This driver simply responds with fake ARP replies and ping
92 replies that are used to verify network stack functionality
93
94 This driver is particularly useful in the test/dm/eth.c tests
95
96 config ETH_SANDBOX_RAW
97 depends on DM_ETH && SANDBOX
98 default y
99 bool "Sandbox: Bridge to Linux Raw Sockets"
100 help
101 This driver is a bridge from the bottom of the network stack
102 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
103 network traffic to be tested from within sandbox. See
104 board/sandbox/README.sandbox for more details.
105
106 config ETH_DESIGNWARE
107 bool "Synopsys Designware Ethernet MAC"
108 select PHYLIB
109 help
110 This MAC is present in SoCs from various vendors. It supports
111 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
112 provide the PHY (physical media interface).
113
114 config ETHOC
115 bool "OpenCores 10/100 Mbps Ethernet MAC"
116 help
117 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
118
119 config FEC_MXC
120 bool "FEC Ethernet controller"
121 depends on MX5 || MX6
122 help
123 This driver supports the 10/100 Fast Ethernet controller for
124 NXP i.MX processors.
125
126 config MVPP2
127 bool "Marvell Armada 375/7K/8K network interface support"
128 depends on ARMADA_375 || ARMADA_8K
129 select PHYLIB
130 help
131 This driver supports the network interface units in the
132 Marvell ARMADA 375, 7K and 8K SoCs.
133
134 config MACB
135 bool "Cadence MACB/GEM Ethernet Interface"
136 depends on DM_ETH
137 select PHYLIB
138 help
139 The Cadence MACB ethernet interface is found on many Atmel
140 AT91 and SAMA5 parts. This driver also supports the Cadence
141 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
142 Say Y to include support for the MACB/GEM chip.
143
144 config PCH_GBE
145 bool "Intel Platform Controller Hub EG20T GMAC driver"
146 depends on DM_ETH && DM_PCI
147 select PHYLIB
148 help
149 This MAC is present in Intel Platform Controller Hub EG20T. It
150 supports 10/100/1000 Mbps operation.
151
152 config RGMII
153 bool "Enable RGMII"
154 help
155 Enable the support of the Reduced Gigabit Media-Independent
156 Interface (RGMII).
157
158 config RTL8139
159 bool "Realtek 8139 series Ethernet controller driver"
160 help
161 This driver supports Realtek 8139 series fast ethernet family of
162 PCI chipsets/adapters.
163
164 config RTL8169
165 bool "Realtek 8169 series Ethernet controller driver"
166 help
167 This driver supports Realtek 8169 series gigabit ethernet family of
168 PCI/PCIe chipsets/adapters.
169
170 config SUN7I_GMAC
171 bool "Enable Allwinner GMAC Ethernet support"
172 help
173 Enable the support for Sun7i GMAC Ethernet controller
174
175 config SUN4I_EMAC
176 bool "Allwinner Sun4i Ethernet MAC support"
177 depends on DM_ETH
178 help
179 This driver supports the Allwinner based SUN4I Ethernet MAC.
180
181 config SUN8I_EMAC
182 bool "Allwinner Sun8i Ethernet MAC support"
183 depends on DM_ETH
184 select PHYLIB
185 help
186 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
187 It can be found in H3/A64/A83T based SoCs and compatible with both
188 External and Internal PHYs.
189
190 config XILINX_AXIEMAC
191 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
192 select PHYLIB
193 select MII
194 bool "Xilinx AXI Ethernet"
195 help
196 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
197
198 config XILINX_EMACLITE
199 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
200 select PHYLIB
201 select MII
202 bool "Xilinx Ethernetlite"
203 help
204 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
205
206 config ZYNQ_GEM
207 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
208 select PHYLIB
209 bool "Xilinx Ethernet GEM"
210 help
211 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
212
213 config PIC32_ETH
214 bool "Microchip PIC32 Ethernet Support"
215 depends on DM_ETH && MACH_PIC32
216 select PHYLIB
217 help
218 This driver implements 10/100 Mbps Ethernet and MAC layer for
219 Microchip PIC32 microcontrollers.
220
221 config GMAC_ROCKCHIP
222 bool "Rockchip Synopsys Designware Ethernet MAC"
223 depends on DM_ETH && ETH_DESIGNWARE
224 help
225 This driver provides Rockchip SoCs network support based on the
226 Synopsys Designware driver.
227
228 config FTMAC100
229 bool "Ftmac100 Ethernet Support"
230 help
231 This MAC is present in Andestech SoCs.
232
233 endif # NETDEVICES