drivers/net/Kconfig

   1 source "drivers/net/phy/Kconfig"
   2
   3 config DM_ETH
   4         bool "Enable Driver Model for Ethernet drivers"
   5         depends on DM
   6         help
   7           Enable driver model for Ethernet.
   8
   9           The eth_*() interface will be implemented by the UC_ETH class
  10           This is currently implemented in net/eth.c
  11           Look in include/net.h for details.
  12
  13 menuconfig NETDEVICES
  14         bool "Network device support"
  15         depends on NET
  16         default y if DM_ETH
  17         help
  18           You must select Y to enable any network device support
  19           Generally if you have any networking support this is a given
  20
  21           If unsure, say Y
  22
  23 if NETDEVICES
  24
  25 config PHY_GIGE
  26         bool "Enable GbE PHY status parsing and configuration"
  27         help
  28           Enables support for parsing the status output and for
  29           configuring GbE PHYs (affects the inner workings of some
  30           commands and miiphyutil.c).
  31
  32 config AG7XXX
  33         bool "Atheros AG7xxx Ethernet MAC support"
  34         depends on DM_ETH && ARCH_ATH79
  35         select PHYLIB
  36         help
  37           This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
  38           present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
  39
  40
  41 config ALTERA_TSE
  42         bool "Altera Triple-Speed Ethernet MAC support"
  43         depends on DM_ETH
  44         select PHYLIB
  45         help
  46           This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
  47           Please find details on the "Triple-Speed Ethernet MegaCore Function
  48           Resource Center" of Altera.
  49
  50 config BCM_SF2_ETH
  51         bool "Broadcom SF2 (Starfighter2) Ethernet support"
  52         select PHYLIB
  53         help
  54           This is an abstract framework which provides a generic interface
  55           to MAC and DMA management for multiple Broadcom SoCs such as
  56           Cygnus, NSP and bcm28155_ap platforms.
  57
  58 config BCM_SF2_ETH_DEFAULT_PORT
  59         int "Broadcom SF2 (Starfighter2) Ethernet default port number"
  60         depends on BCM_SF2_ETH
  61         default 0
  62         help
  63           Default port number for the Starfighter2 ethernet driver.
  64
  65 config BCM_SF2_ETH_GMAC
  66         bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
  67         depends on BCM_SF2_ETH
  68         help
  69           This flag enables the ethernet support for Broadcom platforms with
  70           GMAC such as Cygnus. This driver is based on the framework provided
  71           by the BCM_SF2_ETH driver.
  72           Say Y to any bcmcygnus based platforms.
  73
  74 config DWC_ETH_QOS
  75         bool "Synopsys DWC Ethernet QOS device support"
  76         depends on DM_ETH
  77         select PHYLIB
  78         help
  79           This driver supports the Synopsys Designware Ethernet QOS (Quality
  80           Of Service) IP block. The IP supports many options for bus type,
  81           clocking/reset structure, and feature list. This driver currently
  82           supports the specific configuration used in NVIDIA's Tegra186 chip,
  83           but should be extensible to other combinations quite easily.
  84
  85 config E1000
  86         bool "Intel PRO/1000 Gigabit Ethernet support"
  87         help
  88           This driver supports Intel(R) PRO/1000 gigabit ethernet family of
  89           adapters.  For more information on how to identify your adapter, go
  90           to the Adapter & Driver ID Guide at:
  91
  92           <http://support.intel.com/support/network/adapter/pro100/21397.htm>
  93
  94 config E1000_SPI_GENERIC
  95         bool "Allow access to the Intel 8257x SPI bus"
  96         depends on E1000
  97         help
  98           Allow generic access to the SPI bus on the Intel 8257x, for
  99           example with the "sspi" command.
 100
 101 config E1000_SPI
 102         bool "Enable SPI bus utility code"
 103         depends on E1000
 104         help
 105           Utility code for direct access to the SPI bus on Intel 8257x.
 106           This does not do anything useful unless you set at least one
 107           of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
 108
 109 config CMD_E1000
 110         bool "Enable the e1000 command"
 111         depends on E1000
 112         help
 113           This enables the 'e1000' management command for E1000 devices. When
 114           used on devices with SPI support you can reprogram the EEPROM from
 115           U-Boot.
 116
 117 config ETH_SANDBOX
 118         depends on DM_ETH && SANDBOX
 119         default y
 120         bool "Sandbox: Mocked Ethernet driver"
 121         help
 122           This driver simply responds with fake ARP replies and ping
 123           replies that are used to verify network stack functionality
 124
 125           This driver is particularly useful in the test/dm/eth.c tests
 126
 127 config ETH_SANDBOX_RAW
 128         depends on DM_ETH && SANDBOX
 129         default y
 130         bool "Sandbox: Bridge to Linux Raw Sockets"
 131         help
 132           This driver is a bridge from the bottom of the network stack
 133           in U-Boot to the RAW AF_PACKET API in Linux. This allows real
 134           network traffic to be tested from within sandbox. See
 135           board/sandbox/README.sandbox for more details.
 136
 137 config ETH_DESIGNWARE
 138         bool "Synopsys Designware Ethernet MAC"
 139         select PHYLIB
 140         help
 141           This MAC is present in SoCs from various vendors. It supports
 142           100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
 143           provide the PHY (physical media interface).
 144
 145 config ETHOC
 146         bool "OpenCores 10/100 Mbps Ethernet MAC"
 147         help
 148           This MAC is present in OpenRISC and Xtensa XTFPGA boards.
 149
 150 config FEC_MXC
 151         bool "FEC Ethernet controller"
 152         depends on MX5 || MX6
 153         help
 154           This driver supports the 10/100 Fast Ethernet controller for
 155           NXP i.MX processors.
 156
 157 config FTMAC100
 158         bool "Ftmac100 Ethernet Support"
 159         help
 160           This MAC is present in Andestech SoCs.
 161
 162 config MVNETA
 163         bool "Marvell Armada XP/385/3700 network interface support"
 164         depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
 165         select PHYLIB
 166         help
 167           This driver supports the network interface units in the
 168           Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
 169
 170 config MVPP2
 171         bool "Marvell Armada 375/7K/8K network interface support"
 172         depends on ARMADA_375 || ARMADA_8K
 173         select PHYLIB
 174         help
 175           This driver supports the network interface units in the
 176           Marvell ARMADA 375, 7K and 8K SoCs.
 177
 178 config MACB
 179         bool "Cadence MACB/GEM Ethernet Interface"
 180         depends on DM_ETH
 181         select PHYLIB
 182         help
 183           The Cadence MACB ethernet interface is found on many Atmel
 184           AT91 and SAMA5 parts.  This driver also supports the Cadence
 185           GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
 186           Say Y to include support for the MACB/GEM chip.
 187
 188 config MACB_ZYNQ
 189         bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
 190         depends on MACB
 191         help
 192           The Cadence MACB ethernet interface was used on Zynq platform.
 193           Say Y to enable support for the MACB/GEM in Zynq chip.
 194
 195 config PCH_GBE
 196         bool "Intel Platform Controller Hub EG20T GMAC driver"
 197         depends on DM_ETH && DM_PCI
 198         select PHYLIB
 199         help
 200           This MAC is present in Intel Platform Controller Hub EG20T. It
 201           supports 10/100/1000 Mbps operation.
 202
 203 config RGMII
 204         bool "Enable RGMII"
 205         help
 206           Enable the support of the Reduced Gigabit Media-Independent
 207           Interface (RGMII).
 208
 209 config RTL8139
 210         bool "Realtek 8139 series Ethernet controller driver"
 211         help
 212           This driver supports Realtek 8139 series fast ethernet family of
 213           PCI chipsets/adapters.
 214
 215 config RTL8169
 216         bool "Realtek 8169 series Ethernet controller driver"
 217         help
 218           This driver supports Realtek 8169 series gigabit ethernet family of
 219           PCI/PCIe chipsets/adapters.
 220
 221 config SMC911X
 222         bool "SMSC LAN911x and LAN921x controller driver"
 223
 224 if SMC911X
 225
 226 config SMC911X_BASE
 227         hex "SMC911X Base Address"
 228         help
 229           Define this to hold the physical address
 230           of the device (I/O space)
 231
 232 choice
 233         prompt "SMC911X bus width"
 234         default SMC911X_16_BIT
 235
 236 config SMC911X_32_BIT
 237         bool "Enable 32-bit interface"
 238
 239 config SMC911X_16_BIT
 240         bool "Enable 16-bit interface"
 241         help
 242           Define this if data bus is 16 bits. If your processor
 243           automatically converts one 32 bit word to two 16 bit
 244           words you may also try CONFIG_SMC911X_32_BIT.
 245
 246 endchoice
 247 endif #SMC911X
 248
 249 config SUN7I_GMAC
 250         bool "Enable Allwinner GMAC Ethernet support"
 251         help
 252           Enable the support for Sun7i GMAC Ethernet controller
 253
 254 config SUN7I_GMAC_FORCE_TXERR
 255         bool "Force PA17 as gmac function"
 256         depends on SUN7I_GMAC
 257         help
 258           Some ethernet phys needs TXERR control. Since the GMAC
 259           doesn't have such signal, setting PA17 as GMAC function
 260           makes the pin output low, which enables data transmission.
 261
 262 config SUN4I_EMAC
 263         bool "Allwinner Sun4i Ethernet MAC support"
 264         depends on DM_ETH
 265         select PHYLIB
 266         help
 267           This driver supports the Allwinner based SUN4I Ethernet MAC.
 268
 269 config SUN8I_EMAC
 270         bool "Allwinner Sun8i Ethernet MAC support"
 271         depends on DM_ETH
 272         select PHYLIB
 273         select PHY_GIGE
 274         help
 275           This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
 276           It can be found in H3/A64/A83T based SoCs and compatible with both
 277           External and Internal PHYs.
 278
 279 config SH_ETHER
 280         bool "Renesas SH Ethernet MAC"
 281         select PHYLIB
 282         help
 283           This driver supports the Ethernet for Renesas SH and ARM SoCs.
 284
 285 config XILINX_AXIEMAC
 286         depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
 287         select PHYLIB
 288         select MII
 289         bool "Xilinx AXI Ethernet"
 290         help
 291           This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
 292
 293 config XILINX_EMACLITE
 294         depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
 295         select PHYLIB
 296         select MII
 297         bool "Xilinx Ethernetlite"
 298         help
 299           This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
 300
 301 config ZYNQ_GEM
 302         depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
 303         select PHYLIB
 304         bool "Xilinx Ethernet GEM"
 305         help
 306           This MAC is present in Xilinx Zynq and ZynqMP SoCs.
 307
 308 config PIC32_ETH
 309         bool "Microchip PIC32 Ethernet Support"
 310         depends on DM_ETH && MACH_PIC32
 311         select PHYLIB
 312         help
 313           This driver implements 10/100 Mbps Ethernet and MAC layer for
 314           Microchip PIC32 microcontrollers.
 315
 316 config GMAC_ROCKCHIP
 317         bool "Rockchip Synopsys Designware Ethernet MAC"
 318         depends on DM_ETH && ETH_DESIGNWARE
 319         help
 320           This driver provides Rockchip SoCs network support based on the
 321           Synopsys Designware driver.
 322
 323 config RENESAS_RAVB
 324         bool "Renesas Ethernet AVB MAC"
 325         depends on DM_ETH && RCAR_GEN3
 326         select PHYLIB
 327         help
 328           This driver implements support for the Ethernet AVB block in
 329           Renesas M3 and H3 SoCs.
 330
 331 config MPC8XX_FEC
 332         bool "Fast Ethernet Controller on MPC8XX"
 333         depends on 8xx
 334         select MII
 335         help
 336           This driver implements support for the Fast Ethernet Controller
 337           on MPC8XX
 338
 339 config ETHER_ON_FEC1
 340         bool "FEC1"
 341         depends on MPC8XX_FEC
 342         default y
 343
 344 config FEC1_PHY
 345         int "FEC1 PHY"
 346         depends on ETHER_ON_FEC1
 347         default -1
 348         help
 349           Define to the hardcoded PHY address which corresponds
 350           to the given FEC; i. e.
 351                 #define CONFIG_FEC1_PHY 4
 352           means that the PHY with address 4 is connected to FEC1
 353
 354           When set to -1, means to probe for first available.
 355
 356 config PHY_NORXERR
 357         bool "PHY_NORXERR"
 358         depends on ETHER_ON_FEC1
 359         default n
 360         help
 361           The PHY does not have a RXERR line (RMII only).
 362           (so program the FEC to ignore it).
 363
 364 config ETHER_ON_FEC2
 365         bool "FEC2"
 366         depends on MPC8XX_FEC && MPC885
 367         default y
 368
 369 config FEC2_PHY
 370         int "FEC2 PHY"
 371         depends on ETHER_ON_FEC2
 372         default -1
 373         help
 374           Define to the hardcoded PHY address which corresponds
 375           to the given FEC; i. e.
 376                 #define CONFIG_FEC1_PHY 4
 377           means that the PHY with address 4 is connected to FEC1
 378
 379           When set to -1, means to probe for first available.
 380
 381 config FEC2_PHY_NORXERR
 382         bool "PHY_NORXERR"
 383         depends on ETHER_ON_FEC2
 384         default n
 385         help
 386           The PHY does not have a RXERR line (RMII only).
 387           (so program the FEC to ignore it).
 388
 389 config SYS_DPAA_QBMAN
 390         bool "Device tree fixup for QBMan on freescale SOCs"
 391         depends on (ARM || PPC) && !SPL_BUILD
 392         default y if ARCH_B4860 || \
 393                      ARCH_B4420 || \
 394                      ARCH_P1023 || \
 395                      ARCH_P2041 || \
 396                      ARCH_T1023 || \
 397                      ARCH_T1024 || \
 398                      ARCH_T1040 || \
 399                      ARCH_T1042 || \
 400                      ARCH_T2080 || \
 401                      ARCH_T2081 || \
 402                      ARCH_T4240 || \
 403                      ARCH_T4160 || \
 404                      ARCH_P4080 || \
 405                      ARCH_P3041 || \
 406                      ARCH_P5040 || \
 407                      ARCH_P5020 || \
 408                      ARCH_LS1043A || \
 409                      ARCH_LS1046A
 410         help
 411           QBman fixups to allow deep sleep in DPAA 1 SOCs
 412
 413 endif # NETDEVICES