drivers/pinctrl/Kconfig

   1 #
   2 # PINCTRL infrastructure and drivers
   3 #
   4
   5 menu "Pin controllers"
   6
   7 config PINCTRL
   8         bool "Support pin controllers"
   9         depends on DM
  10         help
  11           This enables the basic support for pinctrl framework.  You may want
  12           to enable some more options depending on what you want to do.
  13
  14 config PINCTRL_FULL
  15         bool "Support full pin controllers"
  16         depends on PINCTRL && OF_CONTROL
  17         default y
  18         help
  19           This provides Linux-compatible device tree interface for the pinctrl
  20           subsystem.  This feature depends on device tree configuration because
  21           it parses a device tree to look for the pinctrl device which the
  22           peripheral device is associated with.
  23
  24           If this option is disabled (it is the only possible choice for non-DT
  25           boards), the pinctrl core provides no systematic mechanism for
  26           identifying peripheral devices, applying needed pinctrl settings.
  27           It is totally up to the implementation of each low-level driver.
  28           You can save memory footprint in return for some limitations.
  29
  30 config PINCTRL_GENERIC
  31         bool "Support generic pin controllers"
  32         depends on PINCTRL_FULL
  33         default y
  34         help
  35           Say Y here if you want to use the pinctrl subsystem through the
  36           generic DT interface.  If enabled, some functions become available
  37           to parse common properties such as "pins", "groups", "functions" and
  38           some pin configuration parameters.  It would be easier if you only
  39           need the generic DT interface for pin muxing and pin configuration.
  40           If you need to handle vendor-specific DT properties, you can disable
  41           this option and implement your own set_state callback in the pinctrl
  42           operations.
  43
  44 config PINMUX
  45         bool "Support pin multiplexing controllers"
  46         depends on PINCTRL_GENERIC
  47         default y
  48         help
  49           This option enables pin multiplexing through the generic pinctrl
  50           framework. Most SoCs have their own own multiplexing arrangement
  51           where a single pin can be used for several functions. An SoC pinctrl
  52           driver allows the required function to be selected for each pin.
  53           The driver is typically controlled by the device tree.
  54
  55 config PINCONF
  56         bool "Support pin configuration controllers"
  57         depends on PINCTRL_GENERIC
  58         help
  59           This option enables pin configuration through the generic pinctrl
  60           framework.
  61
  62 config SPL_PINCTRL
  63         bool "Support pin controlloers in SPL"
  64         depends on SPL && SPL_DM
  65         help
  66           This option is an SPL-variant of the PINCTRL option.
  67           See the help of PINCTRL for details.
  68
  69 config SPL_PINCTRL_FULL
  70         bool "Support full pin controllers in SPL"
  71         depends on SPL_PINCTRL && SPL_OF_CONTROL
  72         default n if TARGET_STM32F746_DISCO
  73         default y
  74         help
  75           This option is an SPL-variant of the PINCTRL_FULL option.
  76           See the help of PINCTRL_FULL for details.
  77
  78 config SPL_PINCTRL_GENERIC
  79         bool "Support generic pin controllers in SPL"
  80         depends on SPL_PINCTRL_FULL
  81         default y
  82         help
  83           This option is an SPL-variant of the PINCTRL_GENERIC option.
  84           See the help of PINCTRL_GENERIC for details.
  85
  86 config SPL_PINMUX
  87         bool "Support pin multiplexing controllers in SPL"
  88         depends on SPL_PINCTRL_GENERIC
  89         default y
  90         help
  91           This option is an SPL-variant of the PINMUX option.
  92           See the help of PINMUX for details.
  93           The pinctrl subsystem can add a substantial overhead to the SPL
  94           image since it typically requires quite a few tables either in the
  95           driver or in the device tree. If this is acceptable and you need
  96           to adjust pin multiplexing in SPL in order to boot into U-Boot,
  97           enable this option. You will need to enable device tree in SPL
  98           for this to work.
  99
 100 config SPL_PINCONF
 101         bool "Support pin configuration controllers in SPL"
 102         depends on SPL_PINCTRL_GENERIC
 103         help
 104           This option is an SPL-variant of the PINCONF option.
 105           See the help of PINCONF for details.
 106
 107 if PINCTRL || SPL_PINCTRL
 108
 109 config PINCTRL_AR933X
 110         bool "QCA/Athores ar933x pin control driver"
 111         depends on DM && SOC_AR933X
 112         help
 113           Support pin multiplexing control on QCA/Athores ar933x SoCs.
 114           The driver is controlled by a device tree node which contains
 115           both the GPIO definitions and pin control functions for each
 116           available multiplex function.
 117
 118 config PINCTRL_AT91
 119         bool "AT91 pinctrl driver"
 120         depends on DM
 121         help
 122           This option is to enable the AT91 pinctrl driver for AT91 PIO
 123           controller.
 124
 125           AT91 PIO controller is a combined gpio-controller, pin-mux and
 126           pin-config module. Each I/O pin may be dedicated as a general-purpose
 127           I/O or be assigned to a function of an embedded peripheral. Each I/O
 128           pin has a glitch filter providing rejection of glitches lower than
 129           one-half of peripheral clock cycle and a debouncing filter providing
 130           rejection of unwanted pulses from key or push button operations. You
 131           can also control the multi-driver capability, pull-up and pull-down
 132           feature on each I/O pin.
 133
 134 config PINCTRL_AT91PIO4
 135         bool "AT91 PIO4 pinctrl driver"
 136         depends on DM
 137         help
 138           This option is to enable the AT91 pinctrl driver for AT91 PIO4
 139           controller which is available on SAMA5D2 SoC.
 140
 141 config PINCTRL_PIC32
 142         bool "Microchip PIC32 pin-control and pin-mux driver"
 143         depends on DM && MACH_PIC32
 144         default y
 145         help
 146           Supports individual pin selection and configuration for each
 147           remappable peripheral available on Microchip PIC32
 148           SoCs. This driver is controlled by a device tree node which
 149           contains both GPIO defintion and pin control functions.
 150
 151 config PINCTRL_QCA953X
 152         bool "QCA/Athores qca953x pin control driver"
 153         depends on DM && SOC_QCA953X
 154         help
 155           Support pin multiplexing control on QCA/Athores qca953x SoCs.
 156
 157           The driver is controlled by a device tree node which contains both
 158           the GPIO definitions and pin control functions for each available
 159           multiplex function.
 160
 161 config PINCTRL_ROCKCHIP_RK3036
 162         bool "Rockchip rk3036 pin control driver"
 163         depends on DM
 164         help
 165           Support pin multiplexing control on Rockchip rk3036 SoCs.
 166
 167           The driver is controlled by a device tree node which contains both
 168           the GPIO definitions and pin control functions for each available
 169           multiplex function.
 170
 171 config PINCTRL_ROCKCHIP_RK3188
 172         bool "Rockchip rk3188 pin control driver"
 173         depends on DM
 174         help
 175           Support pin multiplexing control on Rockchip rk3188 SoCs.
 176
 177           The driver is controlled by a device tree node which contains both
 178           the GPIO definitions and pin control functions for each available
 179           multiplex function.
 180
 181 config PINCTRL_ROCKCHIP_RK3288
 182         bool "Rockchip rk3288 pin control driver"
 183         depends on DM
 184         help
 185           Support pin multiplexing control on Rockchip rk3288 SoCs.
 186
 187           The driver is controlled by a device tree node which contains both
 188           the GPIO definitions and pin control functions for each available
 189           multiplex function.
 190
 191 config PINCTRL_ROCKCHIP_RK3328
 192         bool "Rockchip rk3328 pin control driver"
 193         depends on DM
 194         help
 195           Support pin multiplexing control on Rockchip rk3328 SoCs.
 196
 197           The driver is controlled by a device tree node which contains both
 198           the GPIO definitions and pin control functions for each available
 199           multiplex function.
 200
 201 config PINCTRL_ROCKCHIP_RK3368
 202         bool "Rockchip RK3368 pin control driver"
 203         depends on DM
 204         help
 205           Support pin multiplexing control on Rockchip rk3368 SoCs.
 206
 207           The driver is controlled by a device tree node which contains both
 208           the GPIO definitions and pin control functions for each available
 209           multiplex function.
 210
 211 config PINCTRL_ROCKCHIP_RK3399
 212         bool "Rockchip rk3399 pin control driver"
 213         depends on DM
 214         help
 215           Support pin multiplexing control on Rockchip rk3399 SoCs.
 216
 217           The driver is controlled by a device tree node which contains both
 218           the GPIO definitions and pin control functions for each available
 219           multiplex function.
 220
 221 config PINCTRL_ROCKCHIP_RV1108
 222         bool "Rockchip rv1108 pin control driver"
 223         depends on DM
 224         help
 225           Support pin multiplexing control on Rockchip rv1108 SoC.
 226
 227           The driver is controlled by a device tree node which contains
 228           both the GPIO definitions and pin control functions for each
 229           available multiplex function.
 230
 231 config PINCTRL_SANDBOX
 232         bool "Sandbox pinctrl driver"
 233         depends on SANDBOX
 234         help
 235           This enables pinctrl driver for sandbox.
 236
 237           Currently, this driver actually does nothing but print debug
 238           messages when pinctrl operations are invoked.
 239
 240 config PINCTRL_SINGLE
 241         bool "Single register pin-control and pin-multiplex driver"
 242         depends on DM
 243         help
 244           This enables pinctrl driver for systems using a single register for
 245           pin configuration and multiplexing. TI's AM335X SoCs are examples of
 246           such systems.
 247
 248           Depending on the platform make sure to also enable OF_TRANSLATE and
 249           eventually SPL_OF_TRANSLATE to get correct address translations.
 250
 251 config PINCTRL_STI
 252         bool "STMicroelectronics STi pin-control and pin-mux driver"
 253         depends on DM && ARCH_STI
 254         default y
 255         help
 256           Support pin multiplexing control on STMicrolectronics STi SoCs.
 257
 258           The driver is controlled by a device tree node which contains both
 259           the GPIO definitions and pin control functions for each available
 260           multiplex function.
 261
 262 config PINCTRL_STM32
 263         bool "ST STM32 pin control driver"
 264         depends on DM
 265         help
 266           Supports pin multiplexing control on stm32 SoCs.
 267
 268           The driver is controlled by a device tree node which contains both
 269           the GPIO definitions and pin control functions for each available
 270           multiplex function.
 271
 272 config ASPEED_AST2500_PINCTRL
 273   bool "Aspeed AST2500 pin control driver"
 274   depends on DM && PINCTRL_GENERIC && ASPEED_AST2500
 275   default y
 276   help
 277     Support pin multiplexing control on Aspeed ast2500 SoC. The driver uses
 278         Generic Pinctrl framework and is compatible with the Linux driver,
 279         i.e. it uses the same device tree configuration.
 280
 281 endif
 282
 283 source "drivers/pinctrl/meson/Kconfig"
 284 source "drivers/pinctrl/nxp/Kconfig"
 285 source "drivers/pinctrl/uniphier/Kconfig"
 286 source "drivers/pinctrl/exynos/Kconfig"
 287 source "drivers/pinctrl/mvebu/Kconfig"
 288
 289 endmenu