drivers/power/twl6030.c

   1 /*
   2  * (C) Copyright 2010
   3  * Texas Instruments, <www.ti.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7 #include <config.h>
   8
   9 #include <twl6030.h>
  10
  11 static struct twl6030_data *twl;
  12
  13 static struct twl6030_data twl6030_info = {
  14         .chip_type      = chip_TWL6030,
  15         .adc_rbase      = GPCH0_LSB,
  16         .adc_ctrl       = CTRL_P2,
  17         .adc_enable     = CTRL_P2_SP2,
  18         .vbat_mult      = TWL6030_VBAT_MULT,
  19         .vbat_shift     = TWL6030_VBAT_SHIFT,
  20 };
  21
  22 static struct twl6030_data twl6032_info = {
  23         .chip_type      = chip_TWL6032,
  24         .adc_rbase      = TWL6032_GPCH0_LSB,
  25         .adc_ctrl       = TWL6032_CTRL_P1,
  26         .adc_enable     = CTRL_P1_SP1,
  27         .vbat_mult      = TWL6032_VBAT_MULT,
  28         .vbat_shift     = TWL6032_VBAT_SHIFT,
  29 };
  30
  31
  32 static int twl6030_gpadc_read_channel(u8 channel_no)
  33 {
  34         u8 lsb = 0;
  35         u8 msb = 0;
  36         int ret = 0;
  37
  38         ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
  39                                   twl->adc_rbase + channel_no * 2, &lsb);
  40         if (ret)
  41                 return ret;
  42
  43         ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
  44                                   twl->adc_rbase + 1 + channel_no * 2, &msb);
  45         if (ret)
  46                 return ret;
  47
  48         return (msb << 8) | lsb;
  49 }
  50
  51 static int twl6030_gpadc_sw2_trigger(void)
  52 {
  53         u8 val;
  54         int ret = 0;
  55
  56         ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
  57                                    twl->adc_ctrl, twl->adc_enable);
  58         if (ret)
  59                 return ret;
  60
  61         /* Waiting until the SW1 conversion ends*/
  62         val =  CTRL_P2_BUSY;
  63
  64         while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
  65                 ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
  66                                           twl->adc_ctrl, &val);
  67                 if (ret)
  68                         return ret;
  69                 udelay(1000);
  70         }
  71
  72         return 0;
  73 }
  74
  75 void twl6030_power_off(void)
  76 {
  77         twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_PHOENIX_DEV_ON,
  78                 TWL6030_PHOENIX_APP_DEVOFF | TWL6030_PHOENIX_CON_DEVOFF |
  79                 TWL6030_PHOENIX_MOD_DEVOFF);
  80 }
  81
  82 void twl6030_stop_usb_charging(void)
  83 {
  84         twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1, 0);
  85
  86         return;
  87 }
  88
  89 void twl6030_start_usb_charging(void)
  90 {
  91         twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
  92                              CHARGERUSB_VICHRG, CHARGERUSB_VICHRG_1500);
  93         twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
  94                              CHARGERUSB_CINLIMIT, CHARGERUSB_CIN_LIMIT_NONE);
  95         twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
  96                              CONTROLLER_INT_MASK, MBAT_TEMP);
  97         twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
  98                              CHARGERUSB_INT_MASK, MASK_MCHARGERUSB_THMREG);
  99         twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
 100                              CHARGERUSB_VOREG, CHARGERUSB_VOREG_4P0);
 101         twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
 102                              CHARGERUSB_CTRL2, CHARGERUSB_CTRL2_VITERM_400);
 103         twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL1, TERM);
 104         /* Enable USB charging */
 105         twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
 106                              CONTROLLER_CTRL1, CONTROLLER_CTRL1_EN_CHARGER);
 107         return;
 108 }
 109
 110 int twl6030_get_battery_current(void)
 111 {
 112         int battery_current = 0;
 113         u8 msb = 0;
 114         u8 lsb = 0;
 115
 116         twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_11, &msb);
 117         twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_10, &lsb);
 118         battery_current = ((msb << 8) | lsb);
 119
 120         /* convert 10 bit signed number to 16 bit signed number */
 121         if (battery_current >= 0x2000)
 122                 battery_current = (battery_current - 0x4000);
 123
 124         battery_current = battery_current * 3000 / 4096;
 125         printf("Battery Current: %d mA\n", battery_current);
 126
 127         return battery_current;
 128 }
 129
 130 int twl6030_get_battery_voltage(void)
 131 {
 132         int battery_volt = 0;
 133         int ret = 0;
 134         u8 vbatch;
 135
 136         if (twl->chip_type == chip_TWL6030) {
 137                 vbatch = TWL6030_GPADC_VBAT_CHNL;
 138         } else {
 139                 ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
 140                                            TWL6032_GPSELECT_ISB,
 141                                            TWL6032_GPADC_VBAT_CHNL);
 142                 if (ret)
 143                         return ret;
 144                 vbatch = 0;
 145         }
 146
 147         /* Start GPADC SW conversion */
 148         ret = twl6030_gpadc_sw2_trigger();
 149         if (ret) {
 150                 printf("Failed to convert battery voltage\n");
 151                 return ret;
 152         }
 153
 154         /* measure Vbat voltage */
 155         battery_volt = twl6030_gpadc_read_channel(vbatch);
 156         if (battery_volt < 0) {
 157                 printf("Failed to read battery voltage\n");
 158                 return ret;
 159         }
 160         battery_volt = (battery_volt * twl->vbat_mult) >> twl->vbat_shift;
 161         printf("Battery Voltage: %d mV\n", battery_volt);
 162
 163         return battery_volt;
 164 }
 165
 166 void twl6030_init_battery_charging(void)
 167 {
 168         u8 val = 0;
 169         int battery_volt = 0;
 170         int ret = 0;
 171
 172         ret = twl6030_i2c_read_u8(TWL6030_CHIP_USB, USB_PRODUCT_ID_LSB, &val);
 173         if (ret) {
 174                 puts("twl6030_init_battery_charging(): could not determine chip!\n");
 175                 return;
 176         }
 177         if (val == 0x30) {
 178                 twl = &twl6030_info;
 179         } else if (val == 0x32) {
 180                 twl = &twl6032_info;
 181         } else {
 182                 puts("twl6030_init_battery_charging(): unsupported chip type\n");
 183                 return;
 184         }
 185
 186         /* Enable VBAT measurement */
 187         if (twl->chip_type == chip_TWL6030) {
 188                 twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
 189                 twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
 190                                      TWL6030_GPADC_CTRL,
 191                                      GPADC_CTRL_SCALER_DIV4);
 192         } else {
 193                 twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
 194                                      TWL6032_GPADC_CTRL2,
 195                                      GPADC_CTRL2_CH18_SCALER_EN);
 196         }
 197
 198         /* Enable GPADC module */
 199         ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS);
 200         if (ret) {
 201                 printf("Failed to enable GPADC\n");
 202                 return;
 203         }
 204
 205         battery_volt = twl6030_get_battery_voltage();
 206         if (battery_volt < 0)
 207                 return;
 208
 209         if (battery_volt < 3000)
 210                 printf("Main battery voltage too low!\n");
 211
 212         /* Check for the presence of USB charger */
 213         twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &val);
 214
 215         /* check for battery presence indirectly via Fuel gauge */
 216         if ((val & VBUS_DET) && (battery_volt < 3300))
 217                 twl6030_start_usb_charging();
 218
 219         return;
 220 }
 221
 222 void twl6030_power_mmc_init(int dev_index)
 223 {
 224         u8 value = 0;
 225
 226         if (dev_index == 0) {
 227                 /* 3.0V voltage output for VMMC */
 228                 twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VMMC_CFG_VOLTAGE,
 229                         TWL6030_CFG_VOLTAGE_30);
 230
 231                 /* Enable P1 output for VMMC */
 232                 twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VMMC_CFG_STATE,
 233                         TWL6030_CFG_STATE_P1 | TWL6030_CFG_STATE_ON);
 234         } else if (dev_index == 1) {
 235                 twl6030_i2c_read_u8(TWL6030_CHIP_PM, TWL6030_PH_STS_BOOT,
 236                                     &value);
 237                 /* BOOT2 indicates 1.8V/2.8V VAUX1 for eMMC */
 238                 if (value & TWL6030_PH_STS_BOOT2) {
 239                         /* 1.8V voltage output for VAUX1 */
 240                         twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VAUX1_CFG_VOLTAGE,
 241                                 TWL6030_CFG_VOLTAGE_18);
 242                 } else {
 243                         /* 2.8V voltage output for VAUX1 */
 244                         twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VAUX1_CFG_VOLTAGE,
 245                                 TWL6030_CFG_VOLTAGE_28);
 246                 }
 247
 248                 /* Enable P1 output for VAUX */
 249                 twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VAUX1_CFG_STATE,
 250                         TWL6030_CFG_STATE_P1 | TWL6030_CFG_STATE_ON);
 251         }
 252 }
 253
 254 void twl6030_usb_device_settings()
 255 {
 256         u8 value = 0;
 257
 258         /* 3.3V voltage output for VUSB */
 259         twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VUSB_CFG_VOLTAGE,
 260                 TWL6030_CFG_VOLTAGE_33);
 261
 262         /* Enable P1 output for VUSB */
 263         twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_VUSB_CFG_STATE,
 264                 TWL6030_CFG_STATE_P1 | TWL6030_CFG_STATE_ON);
 265
 266         /* Select the input supply for VUSB regulator */
 267         twl6030_i2c_read_u8(TWL6030_CHIP_PM, TWL6030_MISC2, &value);
 268         value |= TWL6030_MISC2_VUSB_IN_VSYS;
 269         value &= ~TWL6030_MISC2_VUSB_IN_PMID;
 270         twl6030_i2c_write_u8(TWL6030_CHIP_PM, TWL6030_MISC2, value);
 271 }