drivers/sk98lin/h/skerror.h

   1 /******************************************************************************
   2  *
   3  * Name:        skerror.h
   4  * Project:     GEnesis, PCI Gigabit Ethernet Adapter
   5  * Version:     $Revision: 1.5 $
   6  * Date:        $Date: 2002/04/25 11:05:10 $
   7  * Purpose:     SK specific Error log support
   8  *
   9  ******************************************************************************/
  10
  11 /******************************************************************************
  12  *
  13  *      (C)Copyright 1998-2002 SysKonnect GmbH.
  14  *
  15  *      This program is free software; you can redistribute it and/or modify
  16  *      it under the terms of the GNU General Public License as published by
  17  *      the Free Software Foundation; either version 2 of the License, or
  18  *      (at your option) any later version.
  19  *
  20  *      The information in this file is provided "AS IS" without warranty.
  21  *
  22  ******************************************************************************/
  23
  24 /******************************************************************************
  25  *
  26  * History:
  27  *      $Log: skerror.h,v $
  28  *      Revision 1.5  2002/04/25 11:05:10  rschmidt
  29  *      Editorial changes
  30  *
  31  *      Revision 1.4  1999/11/22 13:51:59  cgoos
  32  *      Changed license header to GPL.
  33  *
  34  *      Revision 1.3  1999/09/14 14:04:42  rwahl
  35  *      Added error base SK_ERRBASE_PECP.
  36  *      Changed error base for driver.
  37  *
  38  *      Revision 1.2  1998/08/11 11:15:41  gklug
  39  *      chg: comments
  40  *
  41  *      Revision 1.1  1998/08/11 11:09:38  gklug
  42  *      add: error bases
  43  *      add: error Classes
  44  *      first version
  45  *
  46  *
  47  *
  48  ******************************************************************************/
  49
  50 #ifndef _INC_SKERROR_H_
  51 #define _INC_SKERROR_H_
  52
  53 /*
  54  * Define Error Classes
  55  */
  56 #define SK_ERRCL_OTHER          (0)             /* Other error */
  57 #define SK_ERRCL_CONFIG         (1L<<0) /* Configuration error */
  58 #define SK_ERRCL_INIT           (1L<<1) /* Initialization error */
  59 #define SK_ERRCL_NORES          (1L<<2) /* Out of Resources error */
  60 #define SK_ERRCL_SW                     (1L<<3) /* Internal Software error */
  61 #define SK_ERRCL_HW                     (1L<<4) /* Hardware Failure */
  62 #define SK_ERRCL_COMM           (1L<<5) /* Communication error */
  63
  64
  65 /*
  66  * Define Error Code Bases
  67  */
  68 #define SK_ERRBASE_RLMT          100    /* Base Error number for RLMT */
  69 #define SK_ERRBASE_HWINIT        200    /* Base Error number for HWInit */
  70 #define SK_ERRBASE_VPD           300    /* Base Error number for VPD */
  71 #define SK_ERRBASE_PNMI          400    /* Base Error number for PNMI */
  72 #define SK_ERRBASE_CSUM          500    /* Base Error number for Checksum */
  73 #define SK_ERRBASE_SIRQ          600    /* Base Error number for Special IRQ */
  74 #define SK_ERRBASE_I2C           700    /* Base Error number for I2C module */
  75 #define SK_ERRBASE_QUEUE         800    /* Base Error number for Scheduler */
  76 #define SK_ERRBASE_ADDR          900    /* Base Error number for Address module */
  77 #define SK_ERRBASE_PECP         1000    /* Base Error number for PECP */
  78 #define SK_ERRBASE_DRV          1100    /* Base Error number for Driver */
  79
  80 #endif  /* _INC_SKERROR_H_ */