]>
git.ipfire.org Git - people/ms/u-boot.git/blob - drivers/video/pxa_lcd.c
4 * (C) Copyright 2001-2002
5 * Wolfgang Denk, DENX Software Engineering -- wd@denx.de
7 * SPDX-License-Identifier: GPL-2.0+
10 /************************************************************************/
12 /************************************************************************/
18 #include <linux/types.h>
19 #include <stdio_dev.h>
21 #include <asm/arch/pxa-regs.h>
28 /*----------------------------------------------------------------------*/
30 * Define panel bpp, LCCR0, LCCR3 and panel_info video struct for
35 /* LCD outputs connected to a video DAC */
36 # define LCD_BPP LCD_COLOR8
38 /* you have to set lccr0 and lccr3 (including pcd) */
39 # define REG_LCCR0 0x003008f8
40 # define REG_LCCR3 0x0300FF01
42 /* 640x480x16 @ 61 Hz */
43 vidinfo_t panel_info
= {
48 .vl_clkp
= CONFIG_SYS_HIGH
,
49 .vl_oep
= CONFIG_SYS_HIGH
,
50 .vl_hsp
= CONFIG_SYS_HIGH
,
51 .vl_vsp
= CONFIG_SYS_HIGH
,
52 .vl_dp
= CONFIG_SYS_HIGH
,
65 #endif /* CONFIG_PXA_VIDEO */
67 /*----------------------------------------------------------------------*/
68 #ifdef CONFIG_SHARP_LM8V31
70 # define LCD_BPP LCD_COLOR8
71 # define LCD_INVERT_COLORS /* Needed for colors to be correct, but why? */
73 /* you have to set lccr0 and lccr3 (including pcd) */
74 # define REG_LCCR0 0x0030087C
75 # define REG_LCCR3 0x0340FF08
77 vidinfo_t panel_info
= {
82 .vl_clkp
= CONFIG_SYS_HIGH
,
83 .vl_oep
= CONFIG_SYS_HIGH
,
84 .vl_hsp
= CONFIG_SYS_HIGH
,
85 .vl_vsp
= CONFIG_SYS_HIGH
,
86 .vl_dp
= CONFIG_SYS_HIGH
,
99 #endif /* CONFIG_SHARP_LM8V31 */
100 /*----------------------------------------------------------------------*/
101 #ifdef CONFIG_VOIPAC_LCD
103 # define LCD_BPP LCD_COLOR8
104 # define LCD_INVERT_COLORS
106 /* you have to set lccr0 and lccr3 (including pcd) */
107 # define REG_LCCR0 0x043008f8
108 # define REG_LCCR3 0x0340FF08
110 vidinfo_t panel_info
= {
115 .vl_clkp
= CONFIG_SYS_HIGH
,
116 .vl_oep
= CONFIG_SYS_HIGH
,
117 .vl_hsp
= CONFIG_SYS_HIGH
,
118 .vl_vsp
= CONFIG_SYS_HIGH
,
119 .vl_dp
= CONFIG_SYS_HIGH
,
132 #endif /* CONFIG_VOIPAC_LCD */
134 /*----------------------------------------------------------------------*/
135 #ifdef CONFIG_HITACHI_SX14
136 /* Hitachi SX14Q004-ZZA color STN LCD */
137 #define LCD_BPP LCD_COLOR8
139 /* you have to set lccr0 and lccr3 (including pcd) */
140 #define REG_LCCR0 0x00301079
141 #define REG_LCCR3 0x0340FF20
143 vidinfo_t panel_info
= {
148 .vl_clkp
= CONFIG_SYS_HIGH
,
149 .vl_oep
= CONFIG_SYS_HIGH
,
150 .vl_hsp
= CONFIG_SYS_HIGH
,
151 .vl_vsp
= CONFIG_SYS_HIGH
,
152 .vl_dp
= CONFIG_SYS_HIGH
,
165 #endif /* CONFIG_HITACHI_SX14 */
167 /*----------------------------------------------------------------------*/
168 #ifdef CONFIG_LMS283GF05
170 # define LCD_BPP LCD_COLOR8
171 /*# define LCD_INVERT_COLORS*/
173 /* you have to set lccr0 and lccr3 (including pcd) */
174 # define REG_LCCR0 0x043008f8
175 # define REG_LCCR3 0x03b00009
177 vidinfo_t panel_info
= {
182 .vl_clkp
= CONFIG_SYS_HIGH
,
183 .vl_oep
= CONFIG_SYS_LOW
,
184 .vl_hsp
= CONFIG_SYS_LOW
,
185 .vl_vsp
= CONFIG_SYS_LOW
,
186 .vl_dp
= CONFIG_SYS_HIGH
,
199 #endif /* CONFIG_LMS283GF05 */
201 /*----------------------------------------------------------------------*/
203 #ifdef CONFIG_ACX517AKN
205 # define LCD_BPP LCD_COLOR8
207 /* you have to set lccr0 and lccr3 (including pcd) */
208 # define REG_LCCR0 0x003008f9
209 # define REG_LCCR3 0x03700006
211 vidinfo_t panel_info
= {
216 .vl_clkp
= CONFIG_SYS_HIGH
,
217 .vl_oep
= CONFIG_SYS_LOW
,
218 .vl_hsp
= CONFIG_SYS_LOW
,
219 .vl_vsp
= CONFIG_SYS_LOW
,
220 .vl_dp
= CONFIG_SYS_HIGH
,
233 #endif /* CONFIG_ACX517AKN */
235 #ifdef CONFIG_ACX544AKN
237 # define LCD_BPP LCD_COLOR16
239 /* you have to set lccr0 and lccr3 (including pcd) */
240 # define REG_LCCR0 0x003008f9
241 # define REG_LCCR3 0x04700007 /* 16bpp */
243 vidinfo_t panel_info
= {
248 .vl_clkp
= CONFIG_SYS_LOW
,
249 .vl_oep
= CONFIG_SYS_LOW
,
250 .vl_hsp
= CONFIG_SYS_LOW
,
251 .vl_vsp
= CONFIG_SYS_LOW
,
252 .vl_dp
= CONFIG_SYS_LOW
,
265 #endif /* CONFIG_ACX544AKN */
267 /*----------------------------------------------------------------------*/
269 #ifdef CONFIG_LQ038J7DH53
271 # define LCD_BPP LCD_COLOR8
273 /* you have to set lccr0 and lccr3 (including pcd) */
274 # define REG_LCCR0 0x003008f9
275 # define REG_LCCR3 0x03700004
277 vidinfo_t panel_info
= {
282 .vl_clkp
= CONFIG_SYS_HIGH
,
283 .vl_oep
= CONFIG_SYS_LOW
,
284 .vl_hsp
= CONFIG_SYS_LOW
,
285 .vl_vsp
= CONFIG_SYS_LOW
,
286 .vl_dp
= CONFIG_SYS_HIGH
,
299 #endif /* CONFIG_ACX517AKN */
301 /*----------------------------------------------------------------------*/
303 #ifdef CONFIG_LITTLETON_LCD
304 # define LCD_BPP LCD_COLOR8
306 /* you have to set lccr0 and lccr3 (including pcd) */
307 # define REG_LCCR0 0x003008f8
308 # define REG_LCCR3 0x0300FF04
310 vidinfo_t panel_info
= {
315 .vl_clkp
= CONFIG_SYS_HIGH
,
316 .vl_oep
= CONFIG_SYS_HIGH
,
317 .vl_hsp
= CONFIG_SYS_HIGH
,
318 .vl_vsp
= CONFIG_SYS_HIGH
,
319 .vl_dp
= CONFIG_SYS_HIGH
,
332 #endif /* CONFIG_LITTLETON_LCD */
334 /*----------------------------------------------------------------------*/
336 static int pxafb_init_mem (void *lcdbase
, vidinfo_t
*vid
);
337 static void pxafb_setup_gpio (vidinfo_t
*vid
);
338 static void pxafb_enable_controller (vidinfo_t
*vid
);
339 static int pxafb_init (vidinfo_t
*vid
);
341 /************************************************************************/
342 /* --------------- PXA chipset specific functions ------------------- */
343 /************************************************************************/
345 void lcd_ctrl_init (void *lcdbase
)
347 pxafb_init_mem(lcdbase
, &panel_info
);
348 pxafb_init(&panel_info
);
349 pxafb_setup_gpio(&panel_info
);
350 pxafb_enable_controller(&panel_info
);
353 /*----------------------------------------------------------------------*/
354 #if LCD_BPP == LCD_COLOR8
356 lcd_setcolreg (ushort regno
, ushort red
, ushort green
, ushort blue
)
358 struct pxafb_info
*fbi
= &panel_info
.pxa
;
359 unsigned short *palette
= (unsigned short *)fbi
->palette
;
362 if (regno
< fbi
->palette_size
) {
363 val
= ((red
<< 8) & 0xf800);
364 val
|= ((green
<< 4) & 0x07e0);
365 val
|= (blue
& 0x001f);
367 #ifdef LCD_INVERT_COLORS
368 palette
[regno
] = ~val
;
370 palette
[regno
] = val
;
374 debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %04X\n",
375 regno
, &palette
[regno
],
379 #endif /* LCD_COLOR8 */
381 /*----------------------------------------------------------------------*/
382 #if LCD_BPP == LCD_MONOCHROME
383 void lcd_initcolregs (void)
385 struct pxafb_info
*fbi
= &panel_info
.pxa
;
386 cmap
= (ushort
*)fbi
->palette
;
389 for (regno
= 0; regno
< 16; regno
++) {
391 cmap
[(regno
* 2) + 1] = regno
& 0x0f;
394 #endif /* LCD_MONOCHROME */
396 /*----------------------------------------------------------------------*/
397 __weak
void lcd_enable(void)
401 /************************************************************************/
402 /* ** PXA255 specific routines */
403 /************************************************************************/
406 * Calculate fb size for VIDEOLFB_ATAG. Size returned contains fb,
407 * descriptors and palette areas.
409 ulong
calc_fbsize (void)
412 int line_length
= (panel_info
.vl_col
* NBITS (panel_info
.vl_bpix
)) / 8;
414 size
= line_length
* panel_info
.vl_row
;
420 static int pxafb_init_mem (void *lcdbase
, vidinfo_t
*vid
)
422 u_long palette_mem_size
;
423 struct pxafb_info
*fbi
= &vid
->pxa
;
424 int fb_size
= vid
->vl_row
* (vid
->vl_col
* NBITS (vid
->vl_bpix
)) / 8;
426 fbi
->screen
= (u_long
)lcdbase
;
428 fbi
->palette_size
= NBITS(vid
->vl_bpix
) == 8 ? 256 : 16;
429 palette_mem_size
= fbi
->palette_size
* sizeof(u16
);
431 debug("palette_mem_size = 0x%08lx\n", (u_long
) palette_mem_size
);
432 /* locate palette and descs at end of page following fb */
433 fbi
->palette
= (u_long
)lcdbase
+ fb_size
+ PAGE_SIZE
- palette_mem_size
;
437 #ifdef CONFIG_CPU_MONAHANS
438 static inline void pxafb_setup_gpio (vidinfo_t
*vid
) {}
440 static void pxafb_setup_gpio (vidinfo_t
*vid
)
445 * setup is based on type of panel supported
448 lccr0
= vid
->pxa
.reg_lccr0
;
450 /* 4 bit interface */
451 if ((lccr0
& LCCR0_CMS
) && (lccr0
& LCCR0_SDS
) && !(lccr0
& LCCR0_DPD
))
453 debug("Setting GPIO for 4 bit data\n");
455 writel(readl(GPDR1
) | (0xf << 26), GPDR1
);
456 writel((readl(GAFR1_U
) & ~(0xff << 20)) | (0xaa << 20),
460 writel(readl(GPDR2
) | (0xf << 10), GPDR2
);
461 writel((readl(GAFR2_L
) & ~(0xff << 20)) | (0xaa << 20),
465 /* 8 bit interface */
466 else if (((lccr0
& LCCR0_CMS
) && ((lccr0
& LCCR0_SDS
) || (lccr0
& LCCR0_DPD
))) ||
467 (!(lccr0
& LCCR0_CMS
) && !(lccr0
& LCCR0_PAS
) && !(lccr0
& LCCR0_SDS
)))
469 debug("Setting GPIO for 8 bit data\n");
471 writel(readl(GPDR1
) | (0x3f << 26), GPDR1
);
472 writel(readl(GPDR2
) | (0x3), GPDR2
);
474 writel((readl(GAFR1_U
) & ~(0xfff << 20)) | (0xaaa << 20),
476 writel((readl(GAFR2_L
) & ~0xf) | (0xa), GAFR2_L
);
479 writel(readl(GPDR2
) | (0xf << 10), GPDR2
);
480 writel((readl(GAFR2_L
) & ~(0xff << 20)) | (0xaa << 20),
484 /* 16 bit interface */
485 else if (!(lccr0
& LCCR0_CMS
) && ((lccr0
& LCCR0_SDS
) || (lccr0
& LCCR0_PAS
)))
487 debug("Setting GPIO for 16 bit data\n");
489 writel(readl(GPDR1
) | (0x3f << 26), GPDR1
);
490 writel(readl(GPDR2
) | 0x00003fff, GPDR2
);
492 writel((readl(GAFR1_U
) & ~(0xfff << 20)) | (0xaaa << 20),
494 writel((readl(GAFR2_L
) & 0xf0000000) | 0x0aaaaaaa, GAFR2_L
);
498 printf("pxafb_setup_gpio: unable to determine bits per pixel\n");
503 static void pxafb_enable_controller (vidinfo_t
*vid
)
505 debug("Enabling LCD controller\n");
507 /* Sequence from 11.7.10 */
508 writel(vid
->pxa
.reg_lccr3
, LCCR3
);
509 writel(vid
->pxa
.reg_lccr2
, LCCR2
);
510 writel(vid
->pxa
.reg_lccr1
, LCCR1
);
511 writel(vid
->pxa
.reg_lccr0
& ~LCCR0_ENB
, LCCR0
);
512 writel(vid
->pxa
.fdadr0
, FDADR0
);
513 writel(vid
->pxa
.fdadr1
, FDADR1
);
514 writel(readl(LCCR0
) | LCCR0_ENB
, LCCR0
);
516 #ifdef CONFIG_CPU_MONAHANS
517 writel(readl(CKENA
) | CKENA_1_LCD
, CKENA
);
519 writel(readl(CKEN
) | CKEN16_LCD
, CKEN
);
522 debug("FDADR0 = 0x%08x\n", readl(FDADR0
));
523 debug("FDADR1 = 0x%08x\n", readl(FDADR1
));
524 debug("LCCR0 = 0x%08x\n", readl(LCCR0
));
525 debug("LCCR1 = 0x%08x\n", readl(LCCR1
));
526 debug("LCCR2 = 0x%08x\n", readl(LCCR2
));
527 debug("LCCR3 = 0x%08x\n", readl(LCCR3
));
530 static int pxafb_init (vidinfo_t
*vid
)
532 struct pxafb_info
*fbi
= &vid
->pxa
;
534 debug("Configuring PXA LCD\n");
536 fbi
->reg_lccr0
= REG_LCCR0
;
537 fbi
->reg_lccr3
= REG_LCCR3
;
539 debug("vid: vl_col=%d hslen=%d lm=%d rm=%d\n",
540 vid
->vl_col
, vid
->vl_hpw
,
541 vid
->vl_blw
, vid
->vl_elw
);
542 debug("vid: vl_row=%d vslen=%d um=%d bm=%d\n",
543 vid
->vl_row
, vid
->vl_vpw
,
544 vid
->vl_bfw
, vid
->vl_efw
);
547 LCCR1_DisWdth(vid
->vl_col
) +
548 LCCR1_HorSnchWdth(vid
->vl_hpw
) +
549 LCCR1_BegLnDel(vid
->vl_blw
) +
550 LCCR1_EndLnDel(vid
->vl_elw
);
553 LCCR2_DisHght(vid
->vl_row
) +
554 LCCR2_VrtSnchWdth(vid
->vl_vpw
) +
555 LCCR2_BegFrmDel(vid
->vl_bfw
) +
556 LCCR2_EndFrmDel(vid
->vl_efw
);
558 fbi
->reg_lccr3
= REG_LCCR3
& ~(LCCR3_HSP
| LCCR3_VSP
);
559 fbi
->reg_lccr3
|= (vid
->vl_hsp
? LCCR3_HorSnchL
: LCCR3_HorSnchH
)
560 | (vid
->vl_vsp
? LCCR3_VrtSnchL
: LCCR3_VrtSnchH
);
563 /* setup dma descriptors */
564 fbi
->dmadesc_fblow
= (struct pxafb_dma_descriptor
*)((unsigned int)fbi
->palette
- 3*16);
565 fbi
->dmadesc_fbhigh
= (struct pxafb_dma_descriptor
*)((unsigned int)fbi
->palette
- 2*16);
566 fbi
->dmadesc_palette
= (struct pxafb_dma_descriptor
*)((unsigned int)fbi
->palette
- 1*16);
568 #define BYTES_PER_PANEL ((fbi->reg_lccr0 & LCCR0_SDS) ? \
569 (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8 / 2) : \
570 (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8))
572 /* populate descriptors */
573 fbi
->dmadesc_fblow
->fdadr
= (u_long
)fbi
->dmadesc_fblow
;
574 fbi
->dmadesc_fblow
->fsadr
= fbi
->screen
+ BYTES_PER_PANEL
;
575 fbi
->dmadesc_fblow
->fidr
= 0;
576 fbi
->dmadesc_fblow
->ldcmd
= BYTES_PER_PANEL
;
578 fbi
->fdadr1
= (u_long
)fbi
->dmadesc_fblow
; /* only used in dual-panel mode */
580 fbi
->dmadesc_fbhigh
->fsadr
= fbi
->screen
;
581 fbi
->dmadesc_fbhigh
->fidr
= 0;
582 fbi
->dmadesc_fbhigh
->ldcmd
= BYTES_PER_PANEL
;
584 fbi
->dmadesc_palette
->fsadr
= fbi
->palette
;
585 fbi
->dmadesc_palette
->fidr
= 0;
586 fbi
->dmadesc_palette
->ldcmd
= (fbi
->palette_size
* 2) | LDCMD_PAL
;
588 if( NBITS(vid
->vl_bpix
) < 12)
590 /* assume any mode with <12 bpp is palette driven */
591 fbi
->dmadesc_palette
->fdadr
= (u_long
)fbi
->dmadesc_fbhigh
;
592 fbi
->dmadesc_fbhigh
->fdadr
= (u_long
)fbi
->dmadesc_palette
;
593 /* flips back and forth between pal and fbhigh */
594 fbi
->fdadr0
= (u_long
)fbi
->dmadesc_palette
;
598 /* palette shouldn't be loaded in true-color mode */
599 fbi
->dmadesc_fbhigh
->fdadr
= (u_long
)fbi
->dmadesc_fbhigh
;
600 fbi
->fdadr0
= (u_long
)fbi
->dmadesc_fbhigh
; /* no pal just fbhigh */
603 debug("fbi->dmadesc_fblow = 0x%lx\n", (u_long
)fbi
->dmadesc_fblow
);
604 debug("fbi->dmadesc_fbhigh = 0x%lx\n", (u_long
)fbi
->dmadesc_fbhigh
);
605 debug("fbi->dmadesc_palette = 0x%lx\n", (u_long
)fbi
->dmadesc_palette
);
607 debug("fbi->dmadesc_fblow->fdadr = 0x%lx\n", fbi
->dmadesc_fblow
->fdadr
);
608 debug("fbi->dmadesc_fbhigh->fdadr = 0x%lx\n", fbi
->dmadesc_fbhigh
->fdadr
);
609 debug("fbi->dmadesc_palette->fdadr = 0x%lx\n", fbi
->dmadesc_palette
->fdadr
);
611 debug("fbi->dmadesc_fblow->fsadr = 0x%lx\n", fbi
->dmadesc_fblow
->fsadr
);
612 debug("fbi->dmadesc_fbhigh->fsadr = 0x%lx\n", fbi
->dmadesc_fbhigh
->fsadr
);
613 debug("fbi->dmadesc_palette->fsadr = 0x%lx\n", fbi
->dmadesc_palette
->fsadr
);
615 debug("fbi->dmadesc_fblow->ldcmd = 0x%lx\n", fbi
->dmadesc_fblow
->ldcmd
);
616 debug("fbi->dmadesc_fbhigh->ldcmd = 0x%lx\n", fbi
->dmadesc_fbhigh
->ldcmd
);
617 debug("fbi->dmadesc_palette->ldcmd = 0x%lx\n", fbi
->dmadesc_palette
->ldcmd
);
622 /************************************************************************/
623 /************************************************************************/
625 #endif /* CONFIG_LCD */