]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/asm-ppc/u-boot.h
Add support for AMCC Sequoia PPC440EPx eval board
[people/ms/u-boot.git] / include / asm-ppc / u-boot.h
1 /*
2 * (C) Copyright 2000 - 2002
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18 * MA 02111-1307 USA
19 *
20 ********************************************************************
21 * NOTE: This header file defines an interface to U-Boot. Including
22 * this (unmodified) header file in another file is considered normal
23 * use of U-Boot, and does *not* fall under the heading of "derived
24 * work".
25 ********************************************************************
26 */
27
28 #ifndef __U_BOOT_H__
29 #define __U_BOOT_H__
30
31 /*
32 * Board information passed to Linux kernel from U-Boot
33 *
34 * include/asm-ppc/u-boot.h
35 */
36
37 #ifndef __ASSEMBLY__
38
39 typedef struct bd_info {
40 unsigned long bi_memstart; /* start of DRAM memory */
41 unsigned long bi_memsize; /* size of DRAM memory in bytes */
42 unsigned long bi_flashstart; /* start of FLASH memory */
43 unsigned long bi_flashsize; /* size of FLASH memory */
44 unsigned long bi_flashoffset; /* reserved area for startup monitor */
45 unsigned long bi_sramstart; /* start of SRAM memory */
46 unsigned long bi_sramsize; /* size of SRAM memory */
47 #if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \
48 || defined(CONFIG_E500)
49 unsigned long bi_immr_base; /* base of IMMR register */
50 #endif
51 #if defined(CONFIG_MPC5xxx)
52 unsigned long bi_mbar_base; /* base of internal registers */
53 #endif
54 #if defined(CONFIG_MPC83XX)
55 unsigned long bi_immrbar;
56 #endif
57 #if defined(CONFIG_MPC8220)
58 unsigned long bi_mbar_base; /* base of internal registers */
59 unsigned long bi_inpfreq; /* Input Freq, In MHz */
60 unsigned long bi_pcifreq; /* PCI Freq, in MHz */
61 unsigned long bi_pevfreq; /* PEV Freq, in MHz */
62 unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */
63 unsigned long bi_vcofreq; /* VCO Freq, in MHz */
64 #endif
65 unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
66 unsigned long bi_ip_addr; /* IP Address */
67 unsigned char bi_enetaddr[6]; /* Ethernet adress */
68 unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
69 unsigned long bi_intfreq; /* Internal Freq, in MHz */
70 unsigned long bi_busfreq; /* Bus Freq, in MHz */
71 #if defined(CONFIG_CPM2)
72 unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
73 unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
74 unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
75 unsigned long bi_vco; /* VCO Out from PLL, in MHz */
76 #endif
77 #if defined(CONFIG_MPC5xxx)
78 unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
79 unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
80 #endif
81 unsigned long bi_baudrate; /* Console Baudrate */
82 #if defined(CONFIG_405) || \
83 defined(CONFIG_405GP) || \
84 defined(CONFIG_405CR) || \
85 defined(CONFIG_405EP) || \
86 defined(CONFIG_440)
87 unsigned char bi_s_version[4]; /* Version of this structure */
88 unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */
89 unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
90 unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
91 unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
92 unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
93 #endif
94 #if defined(CONFIG_HYMOD)
95 hymod_conf_t bi_hymod_conf; /* hymod configuration information */
96 #endif
97
98 #ifdef CONFIG_HAS_ETH1
99 /* second onboard ethernet port */
100 unsigned char bi_enet1addr[6];
101 #endif
102 #ifdef CONFIG_HAS_ETH2
103 /* third onboard ethernet port */
104 unsigned char bi_enet2addr[6];
105 #endif
106 #ifdef CONFIG_HAS_ETH3
107 unsigned char bi_enet3addr[6];
108 #endif
109
110 #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \
111 defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
112 defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
113 unsigned int bi_opbfreq; /* OPB clock in Hz */
114 int bi_iic_fast[2]; /* Use fast i2c mode */
115 #endif
116 #if defined(CONFIG_NX823)
117 unsigned char bi_sernum[8];
118 #endif
119 #if defined(CONFIG_4xx)
120 #if defined(CONFIG_440GX)
121 int bi_phynum[4]; /* Determines phy mapping */
122 int bi_phymode[4]; /* Determines phy mode */
123 #elif defined(CONFIG_405EP) || defined(CONFIG_440)
124 int bi_phynum[2]; /* Determines phy mapping */
125 int bi_phymode[2]; /* Determines phy mode */
126 #else
127 int bi_phynum[1]; /* Determines phy mapping */
128 int bi_phymode[1]; /* Determines phy mode */
129 #endif
130 #endif /* defined(CONFIG_4xx) */
131 } bd_t;
132
133 #endif /* __ASSEMBLY__ */
134 #endif /* __U_BOOT_H__ */