include/cmd_confdefs.h

   1 /*
   2  * (C) Copyright 2000-2002
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  *  Definitions for Configuring the monitor commands
  26  */
  27 #ifndef _CMD_CONFIG_H
  28 #define _CMD_CONFIG_H
  29
  30 /*
  31  * Configurable monitor commands
  32  */
  33 #define CFG_CMD_BDI             0x00000001      /* bdinfo                       */
  34 #define CFG_CMD_LOADS           0x00000002      /* loads                        */
  35 #define CFG_CMD_LOADB           0x00000004      /* loadb                        */
  36 #define CFG_CMD_IMI             0x00000008      /* iminfo                       */
  37 #define CFG_CMD_CACHE           0x00000010      /* icache, dcache               */
  38 #define CFG_CMD_FLASH           0x00000020      /* flinfo, erase, protect       */
  39 #define CFG_CMD_MEMORY          0x00000040      /* md, mm, nm, mw, cp, cmp,     */
  40                                                 /* crc, base, loop, mtest       */
  41 #define CFG_CMD_NET             0x00000080      /* bootp, tftpboot, rarpboot    */
  42 #define CFG_CMD_ENV             0x00000100      /* saveenv                      */
  43 #define CFG_CMD_KGDB            0x00000200      /* kgdb                         */
  44 #define CFG_CMD_PCMCIA          0x00000400      /* PCMCIA support               */
  45 #define CFG_CMD_IDE             0x00000800      /* IDE harddisk support         */
  46 #define CFG_CMD_PCI             0x00001000      /* pciinfo                      */
  47 #define CFG_CMD_IRQ             0x00002000      /* irqinfo                      */
  48 #define CFG_CMD_BOOTD           0x00004000      /* bootd                        */
  49 #define CFG_CMD_CONSOLE         0x00008000      /* coninfo                      */
  50 #define CFG_CMD_EEPROM          0x00010000      /* EEPROM read/write support    */
  51 #define CFG_CMD_ASKENV          0x00020000      /* ask for env variable         */
  52 #define CFG_CMD_RUN             0x00040000      /* run command in env variable  */
  53 #define CFG_CMD_ECHO            0x00080000      /* echo arguments               */
  54 #define CFG_CMD_I2C             0x00100000      /* I2C serial bus support       */
  55 #define CFG_CMD_REGINFO         0x00200000      /* Register dump                */
  56 #define CFG_CMD_IMMAP           0x00400000      /* IMMR dump support            */
  57 #define CFG_CMD_DATE            0x00800000      /* support for RTC, date/time...*/
  58 #define CFG_CMD_DHCP            0x01000000      /* DHCP Support                 */
  59 #define CFG_CMD_BEDBUG          0x02000000      /* Include BedBug Debugger      */
  60 #define CFG_CMD_FDC             0x04000000      /* Floppy Disk Support          */
  61 #define CFG_CMD_SCSI            0x08000000      /* SCSI Support                 */
  62 #define CFG_CMD_AUTOSCRIPT      0x10000000      /* Autoscript Support           */
  63 #define CFG_CMD_MII             0x20000000      /* MII support                  */
  64 #define CFG_CMD_SETGETDCR       0x40000000      /* DCR support on 4xx           */
  65 #define CFG_CMD_BSP             0x80000000      /* Board Specific functions     */
  66
  67 #define CFG_CMD_ELF     0x0000000100000000      /* ELF (VxWorks) load/boot cmd  */
  68 #define CFG_CMD_MISC    0x0000000200000000      /* Misc functions like sleep etc*/
  69 #define CFG_CMD_USB     0x0000000400000000      /* USB Support                  */
  70 #define CFG_CMD_DOC     0x0000000800000000      /* Disk-On-Chip Support         */
  71 #define CFG_CMD_JFFS2   0x0000001000000000      /* JFFS2 Support                */
  72 #define CFG_CMD_DTT     0x0000002000000000      /* Digital Therm and Thermostat */
  73 #define CFG_CMD_SDRAM   0x0000004000000000      /* SDRAM DIMM SPD info printout */
  74 #define CFG_CMD_DIAG    0x0000008000000000      /* Diagnostics                  */
  75 #define CFG_CMD_FPGA    0x0000010000000000      /* FPGA configuration Support   */
  76 #define CFG_CMD_HWFLOW  0x0000020000000000      /* RTS/CTS hw flow control      */
  77 #define CFG_CMD_SAVES   0x0000040000000000      /* save S record dump           */
  78 #define CFG_CMD_VFD     0x0000080000000000      /* Display bitmap on VFD display*/
  79
  80 #define CFG_CMD_ALL     0xFFFFFFFFFFFFFFFF      /* ALL commands                 */
  81
  82 /* Commands that are considered "non-standard" for some reason
  83  * (memory hogs, requires special hardware, not fully tested, etc.)
  84  */
  85 #define CFG_CMD_NONSTD (CFG_CMD_ASKENV  | \
  86                         CFG_CMD_BEDBUG  | \
  87                         CFG_CMD_BSP     | \
  88                         CFG_CMD_CACHE   | \
  89                         CFG_CMD_DATE    | \
  90                         CFG_CMD_DHCP    | \
  91                         CFG_CMD_DIAG    | \
  92                         CFG_CMD_DOC     | \
  93                         CFG_CMD_DTT     | \
  94                         CFG_CMD_ECHO    | \
  95                         CFG_CMD_EEPROM  | \
  96                         CFG_CMD_ELF     | \
  97                         CFG_CMD_FDC     | \
  98                         CFG_CMD_HWFLOW  | \
  99                         CFG_CMD_I2C     | \
 100                         CFG_CMD_IDE     | \
 101                         CFG_CMD_IMMAP   | \
 102                         CFG_CMD_IRQ     | \
 103                         CFG_CMD_JFFS2   | \
 104                         CFG_CMD_KGDB    | \
 105                         CFG_CMD_MII     | \
 106                         CFG_CMD_PCI     | \
 107                         CFG_CMD_PCMCIA  | \
 108                         CFG_CMD_REGINFO | \
 109                         CFG_CMD_SAVES   | \
 110                         CFG_CMD_SCSI    | \
 111                         CFG_CMD_SDRAM   | \
 112                         CFG_CMD_USB     | \
 113                         CFG_CMD_VFD     )
 114
 115 /* Default configuration
 116  */
 117 #define CONFIG_CMD_DFL  (CFG_CMD_ALL & ~CFG_CMD_NONSTD)
 118
 119 #ifndef CONFIG_COMMANDS
 120 #define CONFIG_COMMANDS CONFIG_CMD_DFL
 121 #endif
 122
 123
 124
 125 /*
 126  * optional BOOTP fields
 127  */
 128
 129 #define CONFIG_BOOTP_SUBNETMASK         0x00000001
 130 #define CONFIG_BOOTP_GATEWAY            0x00000002
 131 #define CONFIG_BOOTP_HOSTNAME           0x00000004
 132 #define CONFIG_BOOTP_NISDOMAIN          0x00000008
 133 #define CONFIG_BOOTP_BOOTPATH           0x00000010
 134 #define CONFIG_BOOTP_BOOTFILESIZE       0x00000020
 135 #define CONFIG_BOOTP_DNS                0x00000040
 136
 137 #define CONFIG_BOOTP_VENDOREX           0x80000000
 138
 139 #define CONFIG_BOOTP_ALL                (~CONFIG_BOOTP_VENDOREX)
 140
 141
 142 #define CONFIG_BOOTP_DEFAULT            (CONFIG_BOOTP_SUBNETMASK | \
 143                                         CONFIG_BOOTP_GATEWAY     | \
 144                                         CONFIG_BOOTP_HOSTNAME    | \
 145                                         CONFIG_BOOTP_BOOTPATH)
 146
 147 #ifndef CONFIG_BOOTP_MASK
 148 #define CONFIG_BOOTP_MASK               CONFIG_BOOTP_DEFAULT
 149 #endif
 150
 151 #endif  /* _CMD_CONFIG_H */