]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/common.h
Merge branch 'master' of git://git.denx.de/u-boot-mips
[people/ms/u-boot.git] / include / common.h
1 /*
2 * (C) Copyright 2000-2009
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8 #ifndef __COMMON_H_
9 #define __COMMON_H_ 1
10
11 #ifndef __ASSEMBLY__ /* put C only stuff in this section */
12
13 typedef unsigned char uchar;
14 typedef volatile unsigned long vu_long;
15 typedef volatile unsigned short vu_short;
16 typedef volatile unsigned char vu_char;
17
18 #include <config.h>
19 #include <asm-offsets.h>
20 #include <linux/bitops.h>
21 #include <linux/types.h>
22 #include <linux/string.h>
23 #include <linux/stringify.h>
24 #include <asm/ptrace.h>
25 #include <stdarg.h>
26 #include <linux/kernel.h>
27 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
28 #include <pci.h>
29 #endif
30 #if defined(CONFIG_8xx)
31 #include <asm/8xx_immap.h>
32 #if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
33 defined(CONFIG_MPC866) || \
34 defined(CONFIG_MPC866P)
35 # define CONFIG_MPC866_FAMILY 1
36 #elif defined(CONFIG_MPC885)
37 # define CONFIG_MPC885_FAMILY 1
38 #endif
39 #if defined(CONFIG_MPC860) \
40 || defined(CONFIG_MPC860T) \
41 || defined(CONFIG_MPC866_FAMILY) \
42 || defined(CONFIG_MPC885_FAMILY)
43 # define CONFIG_MPC86x 1
44 #endif
45 #elif defined(CONFIG_5xx)
46 #include <asm/5xx_immap.h>
47 #elif defined(CONFIG_MPC5xxx)
48 #include <mpc5xxx.h>
49 #elif defined(CONFIG_MPC512X)
50 #include <asm/immap_512x.h>
51 #elif defined(CONFIG_MPC8260)
52 #if defined(CONFIG_MPC8247) \
53 || defined(CONFIG_MPC8272)
54 #define CONFIG_MPC8272_FAMILY 1
55 #endif
56 #include <asm/immap_8260.h>
57 #endif
58 #ifdef CONFIG_MPC86xx
59 #include <mpc86xx.h>
60 #include <asm/immap_86xx.h>
61 #endif
62 #ifdef CONFIG_MPC85xx
63 #include <mpc85xx.h>
64 #include <asm/immap_85xx.h>
65 #endif
66 #ifdef CONFIG_MPC83xx
67 #include <mpc83xx.h>
68 #include <asm/immap_83xx.h>
69 #endif
70 #ifdef CONFIG_4xx
71 #include <asm/ppc4xx.h>
72 #endif
73 #ifdef CONFIG_BLACKFIN
74 #include <asm/blackfin.h>
75 #endif
76 #ifdef CONFIG_SOC_DA8XX
77 #include <asm/arch/hardware.h>
78 #endif
79 #ifdef CONFIG_FSL_LSCH3
80 #include <asm/arch/immap_lsch3.h>
81 #endif
82 #ifdef CONFIG_FSL_LSCH2
83 #include <asm/arch/immap_lsch2.h>
84 #endif
85
86 #include <part.h>
87 #include <flash.h>
88 #include <image.h>
89
90 /* Bring in printf format macros if inttypes.h is included */
91 #define __STDC_FORMAT_MACROS
92
93 #ifdef __LP64__
94 #define CONFIG_SYS_SUPPORT_64BIT_DATA
95 #endif
96
97 #ifdef DEBUG
98 #define _DEBUG 1
99 #else
100 #define _DEBUG 0
101 #endif
102
103 #ifndef pr_fmt
104 #define pr_fmt(fmt) fmt
105 #endif
106
107 /*
108 * Output a debug text when condition "cond" is met. The "cond" should be
109 * computed by a preprocessor in the best case, allowing for the best
110 * optimization.
111 */
112 #define debug_cond(cond, fmt, args...) \
113 do { \
114 if (cond) \
115 printf(pr_fmt(fmt), ##args); \
116 } while (0)
117
118 #define debug(fmt, args...) \
119 debug_cond(_DEBUG, fmt, ##args)
120
121 /*
122 * An assertion is run-time check done in debug mode only. If DEBUG is not
123 * defined then it is skipped. If DEBUG is defined and the assertion fails,
124 * then it calls panic*( which may or may not reset/halt U-Boot (see
125 * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
126 * before release, and after release it is hoped that they don't matter. But
127 * in any case these failing assertions cannot be fixed with a reset (which
128 * may just do the same assertion again).
129 */
130 void __assert_fail(const char *assertion, const char *file, unsigned line,
131 const char *function);
132 #define assert(x) \
133 ({ if (!(x) && _DEBUG) \
134 __assert_fail(#x, __FILE__, __LINE__, __func__); })
135
136 #define error(fmt, args...) do { \
137 printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \
138 ##args, __FILE__, __LINE__, __func__); \
139 } while (0)
140
141 #ifndef BUG
142 #define BUG() do { \
143 printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
144 panic("BUG!"); \
145 } while (0)
146 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
147 #endif /* BUG */
148
149 /* Force a compilation error if condition is true */
150 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
151
152 typedef void (interrupt_handler_t)(void *);
153
154 #include <asm/u-boot.h> /* boot information for Linux kernel */
155 #include <asm/global_data.h> /* global data used for startup functions */
156
157 /*
158 * enable common handling for all TQM8xxL/M boards:
159 * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
160 * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
161 * and for the TQM885D board
162 */
163 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
164 defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
165 defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
166 # ifndef CONFIG_TQM8xxM
167 # define CONFIG_TQM8xxM
168 # endif
169 #endif
170 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
171 defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
172 defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
173 defined(CONFIG_TQM885D)
174 # ifndef CONFIG_TQM8xxL
175 # define CONFIG_TQM8xxL
176 # endif
177 #endif
178
179 #if defined(CONFIG_ENV_IS_EMBEDDED)
180 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
181 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
182 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
183 defined(CONFIG_ENV_IS_IN_NVRAM)
184 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
185 #else
186 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
187 #endif
188
189 /*
190 * Function Prototypes
191 */
192 int dram_init(void);
193
194 void hang (void) __attribute__ ((noreturn));
195
196 int timer_init(void);
197 int cpu_init(void);
198
199 /* */
200 phys_size_t initdram (int);
201
202 #include <display_options.h>
203
204 /* common/main.c */
205 void main_loop (void);
206 int run_command(const char *cmd, int flag);
207 int run_command_repeatable(const char *cmd, int flag);
208
209 /**
210 * Run a list of commands separated by ; or even \0
211 *
212 * Note that if 'len' is not -1, then the command does not need to be nul
213 * terminated, Memory will be allocated for the command in that case.
214 *
215 * @param cmd List of commands to run, each separated bu semicolon
216 * @param len Length of commands excluding terminator if known (-1 if not)
217 * @param flag Execution flags (CMD_FLAG_...)
218 * @return 0 on success, or != 0 on error.
219 */
220 int run_command_list(const char *cmd, int len, int flag);
221 extern char console_buffer[];
222
223 /* arch/$(ARCH)/lib/board.c */
224 void board_init_f(ulong);
225 void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
226
227 /**
228 * board_init_f_mem() - Allocate global data and set stack position
229 *
230 * This function is called by each architecture very early in the start-up
231 * code to set up the environment for board_init_f(). It allocates space for
232 * global_data (see include/asm-generic/global_data.h) and places the stack
233 * below this.
234 *
235 * This function requires a stack[1] Normally this is at @top. The function
236 * starts allocating space from 64 bytes below @top. First it creates space
237 * for global_data. Then it calls arch_setup_gd() which sets gd to point to
238 * the global_data space and can reserve additional bytes of space if
239 * required). Finally it allocates early malloc() memory
240 * (CONFIG_SYS_MALLOC_F_LEN). The new top of the stack is just below this,
241 * and it returned by this function.
242 *
243 * [1] Strictly speaking it would be possible to implement this function
244 * in C on many archs such that it does not require a stack. However this
245 * does not seem hugely important as only 64 byte are wasted. The 64 bytes
246 * are used to handle the calling standard which generally requires pushing
247 * addresses or registers onto the stack. We should be able to get away with
248 * less if this becomes important.
249 *
250 * @top: Top of available memory, also normally the top of the stack
251 * @return: New stack location
252 */
253 ulong board_init_f_mem(ulong top);
254
255 /**
256 * arch_setup_gd() - Set up the global_data pointer
257 *
258 * This pointer is special in some architectures and cannot easily be assigned
259 * to. For example on x86 it is implemented by adding a specific record to its
260 * Global Descriptor Table! So we we provide a function to carry out this task.
261 * For most architectures this can simply be:
262 *
263 * gd = gd_ptr;
264 *
265 * @gd_ptr: Pointer to global data
266 */
267 void arch_setup_gd(gd_t *gd_ptr);
268
269 int checkboard(void);
270 int show_board_info(void);
271 int checkflash(void);
272 int checkdram(void);
273 int last_stage_init(void);
274 extern ulong monitor_flash_len;
275 int mac_read_from_eeprom(void);
276 extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
277 int set_cpu_clk_info(void);
278 int mdm_init(void);
279 #if defined(CONFIG_DISPLAY_CPUINFO)
280 int print_cpuinfo(void);
281 #else
282 static inline int print_cpuinfo(void)
283 {
284 return 0;
285 }
286 #endif
287 int update_flash_size(int flash_size);
288 int arch_early_init_r(void);
289
290 /**
291 * arch_cpu_init_dm() - init CPU after driver model is available
292 *
293 * This is called immediately after driver model is available before
294 * relocation. This is similar to arch_cpu_init() but is able to reference
295 * devices
296 *
297 * @return 0 if OK, -ve on error
298 */
299 int arch_cpu_init_dm(void);
300
301 /**
302 * Reserve all necessary stacks
303 *
304 * This is used in generic board init sequence in common/board_f.c. Each
305 * architecture could provide this function to tailor the required stacks.
306 *
307 * On entry gd->start_addr_sp is pointing to the suggested top of the stack.
308 * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures
309 * require only this can leave it untouched.
310 *
311 * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective
312 * positions of the stack. The stack pointer(s) will be set to this later.
313 * gd->irq_sp is only required, if the architecture needs it.
314 *
315 * @return 0 if no error
316 */
317 __weak int arch_reserve_stacks(void);
318
319 /**
320 * Show the DRAM size in a board-specific way
321 *
322 * This is used by boards to display DRAM information in their own way.
323 *
324 * @param size Size of DRAM (which should be displayed along with other info)
325 */
326 void board_show_dram(phys_size_t size);
327
328 /**
329 * arch_fixup_fdt() - Write arch-specific information to fdt
330 *
331 * Defined in arch/$(ARCH)/lib/bootm-fdt.c
332 *
333 * @blob: FDT blob to write to
334 * @return 0 if ok, or -ve FDT_ERR_... on failure
335 */
336 int arch_fixup_fdt(void *blob);
337
338 /* common/flash.c */
339 void flash_perror (int);
340
341 /* common/cmd_source.c */
342 int source (ulong addr, const char *fit_uname);
343
344 extern ulong load_addr; /* Default Load Address */
345 extern ulong save_addr; /* Default Save Address */
346 extern ulong save_size; /* Default Save Size */
347
348 /* common/cmd_doc.c */
349 void doc_probe(unsigned long physadr);
350
351 /* common/cmd_net.c */
352 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
353
354 /* common/cmd_fat.c */
355 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
356
357 /* common/cmd_ext2.c */
358 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
359
360 /* common/cmd_nvedit.c */
361 int env_init (void);
362 void env_relocate (void);
363 int envmatch (uchar *, int);
364
365 /* Avoid unfortunate conflict with libc's getenv() */
366 #ifdef CONFIG_SANDBOX
367 #define getenv uboot_getenv
368 #endif
369 char *getenv (const char *);
370 int getenv_f (const char *name, char *buf, unsigned len);
371 ulong getenv_ulong(const char *name, int base, ulong default_val);
372
373 /**
374 * getenv_hex() - Return an environment variable as a hex value
375 *
376 * Decode an environment as a hex number (it may or may not have a 0x
377 * prefix). If the environment variable cannot be found, or does not start
378 * with hex digits, the default value is returned.
379 *
380 * @varname: Variable to decode
381 * @default_val: Value to return on error
382 */
383 ulong getenv_hex(const char *varname, ulong default_val);
384
385 /*
386 * Read an environment variable as a boolean
387 * Return -1 if variable does not exist (default to true)
388 */
389 int getenv_yesno(const char *var);
390 int saveenv (void);
391 int setenv (const char *, const char *);
392 int setenv_ulong(const char *varname, ulong value);
393 int setenv_hex(const char *varname, ulong value);
394 /**
395 * setenv_addr - Set an environment variable to an address in hex
396 *
397 * @varname: Environment variable to set
398 * @addr: Value to set it to
399 * @return 0 if ok, 1 on error
400 */
401 static inline int setenv_addr(const char *varname, const void *addr)
402 {
403 return setenv_hex(varname, (ulong)addr);
404 }
405
406 #ifdef CONFIG_ARM
407 # include <asm/mach-types.h>
408 # include <asm/setup.h>
409 # include <asm/u-boot-arm.h> /* ARM version to be fixed! */
410 #endif /* CONFIG_ARM */
411 #ifdef CONFIG_X86 /* x86 version to be fixed! */
412 # include <asm/u-boot-x86.h>
413 #endif /* CONFIG_X86 */
414 #ifdef CONFIG_SANDBOX
415 # include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
416 #endif
417 #ifdef CONFIG_NDS32
418 # include <asm/mach-types.h>
419 # include <asm/setup.h>
420 # include <asm/u-boot-nds32.h>
421 #endif /* CONFIG_NDS32 */
422 #ifdef CONFIG_MIPS
423 # include <asm/u-boot-mips.h>
424 #endif /* CONFIG_MIPS */
425 #ifdef CONFIG_ARC
426 # include <asm/u-boot-arc.h>
427 #endif /* CONFIG_ARC */
428
429 #ifdef CONFIG_AUTO_COMPLETE
430 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
431 #endif
432 int get_env_id (void);
433
434 void pci_init (void);
435 void pci_init_board(void);
436 void pciinfo (int, int);
437
438 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
439 int pci_pre_init (struct pci_controller *);
440 int is_pci_host (struct pci_controller *);
441 #endif
442
443 #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
444 # if defined(CONFIG_SYS_PCI_TARGET_INIT)
445 void pci_target_init (struct pci_controller *);
446 # endif
447 # if defined(CONFIG_SYS_PCI_MASTER_INIT)
448 void pci_master_init (struct pci_controller *);
449 # endif
450 #if defined(CONFIG_440SPE) || \
451 defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
452 defined(CONFIG_405EX)
453 void pcie_setup_hoses(int busno);
454 #endif
455 #endif
456
457 int misc_init_f (void);
458 int misc_init_r (void);
459
460 /* common/exports.c */
461 void jumptable_init(void);
462
463 /* common/kallsysm.c */
464 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
465
466 /* api/api.c */
467 void api_init (void);
468
469 /* common/memsize.c */
470 long get_ram_size (long *, long);
471 phys_size_t get_effective_memsize(void);
472
473 /* $(BOARD)/$(BOARD).c */
474 void reset_phy (void);
475 void fdc_hw_init (void);
476
477 /* $(BOARD)/eeprom.c */
478 void eeprom_init (void);
479 #ifndef CONFIG_SPI
480 int eeprom_probe (unsigned dev_addr, unsigned offset);
481 #endif
482 int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
483 int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
484
485 /*
486 * Set this up regardless of board
487 * type, to prevent errors.
488 */
489 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
490 # define CONFIG_SYS_DEF_EEPROM_ADDR 0
491 #else
492 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
493 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
494 #endif
495 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
496
497 #if defined(CONFIG_SPI)
498 extern void spi_init_f (void);
499 extern void spi_init_r (void);
500 extern ssize_t spi_read (uchar *, int, uchar *, int);
501 extern ssize_t spi_write (uchar *, int, uchar *, int);
502 #endif
503
504 /* $(BOARD)/$(BOARD).c */
505 int board_early_init_f (void);
506 int board_late_init (void);
507 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
508 int board_early_init_r (void);
509 void board_poweroff (void);
510
511 #if defined(CONFIG_SYS_DRAM_TEST)
512 int testdram(void);
513 #endif /* CONFIG_SYS_DRAM_TEST */
514
515 /* $(CPU)/start.S */
516 #if defined(CONFIG_5xx) || \
517 defined(CONFIG_8xx)
518 uint get_immr (uint);
519 #endif
520 #if defined(CONFIG_MPC5xxx)
521 uint get_svr (void);
522 #endif
523 uint get_pvr (void);
524 uint get_svr (void);
525 uint rd_ic_cst (void);
526 void wr_ic_cst (uint);
527 void wr_ic_adr (uint);
528 uint rd_dc_cst (void);
529 void wr_dc_cst (uint);
530 void wr_dc_adr (uint);
531 int icache_status (void);
532 void icache_enable (void);
533 void icache_disable(void);
534 int dcache_status (void);
535 void dcache_enable (void);
536 void dcache_disable(void);
537 void mmu_disable(void);
538 #if defined(CONFIG_ARM)
539 void relocate_code(ulong);
540 #else
541 void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
542 #endif
543 ulong get_endaddr (void);
544 void trap_init (ulong);
545 #if defined (CONFIG_4xx) || \
546 defined (CONFIG_MPC5xxx) || \
547 defined (CONFIG_MPC85xx) || \
548 defined (CONFIG_MPC86xx) || \
549 defined (CONFIG_MPC83xx)
550 unsigned char in8(unsigned int);
551 void out8(unsigned int, unsigned char);
552 unsigned short in16(unsigned int);
553 unsigned short in16r(unsigned int);
554 void out16(unsigned int, unsigned short value);
555 void out16r(unsigned int, unsigned short value);
556 unsigned long in32(unsigned int);
557 unsigned long in32r(unsigned int);
558 void out32(unsigned int, unsigned long value);
559 void out32r(unsigned int, unsigned long value);
560 void ppcDcbf(unsigned long value);
561 void ppcDcbi(unsigned long value);
562 void ppcSync(void);
563 void ppcDcbz(unsigned long value);
564 #endif
565 #if defined (CONFIG_MICROBLAZE)
566 unsigned short in16(unsigned int);
567 void out16(unsigned int, unsigned short value);
568 #endif
569
570 #if defined (CONFIG_MPC83xx)
571 void ppcDWload(unsigned int *addr, unsigned int *ret);
572 void ppcDWstore(unsigned int *addr, unsigned int *value);
573 void disable_addr_trans(void);
574 void enable_addr_trans(void);
575 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
576 void ddr_enable_ecc(unsigned int dram_size);
577 #endif
578 #endif
579
580 /*
581 * Return the current value of a monotonically increasing microsecond timer.
582 * Granularity may be larger than 1us if hardware does not support this.
583 */
584 ulong timer_get_us(void);
585
586 /* $(CPU)/cpu.c */
587 static inline int cpumask_next(int cpu, unsigned int mask)
588 {
589 for (cpu++; !((1 << cpu) & mask); cpu++)
590 ;
591
592 return cpu;
593 }
594
595 #define for_each_cpu(iter, cpu, num_cpus, mask) \
596 for (iter = 0, cpu = cpumask_next(-1, mask); \
597 iter < num_cpus; \
598 iter++, cpu = cpumask_next(cpu, mask)) \
599
600 int cpu_numcores (void);
601 int cpu_num_dspcores(void);
602 u32 cpu_mask (void);
603 u32 cpu_dsp_mask(void);
604 int is_core_valid (unsigned int);
605 int probecpu (void);
606 int checkcpu (void);
607 int checkicache (void);
608 int checkdcache (void);
609 void upmconfig (unsigned int, unsigned int *, unsigned int);
610 ulong get_tbclk (void);
611 void reset_misc (void);
612 void reset_cpu (ulong addr);
613 #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
614 void ft_cpu_setup(void *blob, bd_t *bd);
615 #ifdef CONFIG_PCI
616 void ft_pci_setup(void *blob, bd_t *bd);
617 #endif
618 #endif
619
620 void smp_set_core_boot_addr(unsigned long addr, int corenr);
621 void smp_kick_all_cpus(void);
622
623 /* $(CPU)/serial.c */
624 int serial_init (void);
625 void serial_setbrg (void);
626 void serial_putc (const char);
627 void serial_putc_raw(const char);
628 void serial_puts (const char *);
629 int serial_getc (void);
630 int serial_tstc (void);
631
632 /* These versions take a stdio_dev pointer */
633 struct stdio_dev;
634 int serial_stub_getc(struct stdio_dev *sdev);
635 int serial_stub_tstc(struct stdio_dev *sdev);
636
637 /* $(CPU)/speed.c */
638 int get_clocks (void);
639 int get_clocks_866 (void);
640 int sdram_adjust_866 (void);
641 int adjust_sdram_tbs_8xx (void);
642 #if defined(CONFIG_MPC8260)
643 int prt_8260_clks (void);
644 #elif defined(CONFIG_MPC5xxx)
645 int prt_mpc5xxx_clks (void);
646 #endif
647 #ifdef CONFIG_4xx
648 ulong get_OPB_freq (void);
649 ulong get_PCI_freq (void);
650 #endif
651 #if defined(CONFIG_S3C24X0) || \
652 defined(CONFIG_LH7A40X) || \
653 defined(CONFIG_EP93XX)
654 ulong get_FCLK (void);
655 ulong get_HCLK (void);
656 ulong get_PCLK (void);
657 ulong get_UCLK (void);
658 #endif
659 #if defined(CONFIG_LH7A40X)
660 ulong get_PLLCLK (void);
661 #endif
662 #if defined(CONFIG_IMX)
663 ulong get_systemPLLCLK(void);
664 ulong get_FCLK(void);
665 ulong get_HCLK(void);
666 ulong get_BCLK(void);
667 ulong get_PERCLK1(void);
668 ulong get_PERCLK2(void);
669 ulong get_PERCLK3(void);
670 #endif
671 ulong get_bus_freq (ulong);
672 int get_serial_clock(void);
673
674 #if defined(CONFIG_MPC85xx)
675 typedef MPC85xx_SYS_INFO sys_info_t;
676 void get_sys_info ( sys_info_t * );
677 # if defined(CONFIG_OF_LIBFDT)
678 void ft_fixup_cpu(void *, u64);
679 void ft_fixup_num_cores(void *);
680 # endif
681 #endif
682 #if defined(CONFIG_MPC86xx)
683 typedef MPC86xx_SYS_INFO sys_info_t;
684 void get_sys_info ( sys_info_t * );
685 static inline ulong get_ddr_freq(ulong dummy)
686 {
687 return get_bus_freq(dummy);
688 }
689 #else
690 ulong get_ddr_freq(ulong);
691 #endif
692
693 #if defined(CONFIG_4xx)
694 # if defined(CONFIG_440)
695 # if defined(CONFIG_440SPE)
696 unsigned long determine_sysper(void);
697 unsigned long determine_pci_clock_per(void);
698 # endif
699 # endif
700 typedef PPC4xx_SYS_INFO sys_info_t;
701 int ppc440spe_revB(void);
702 void get_sys_info ( sys_info_t * );
703 #endif
704
705 /* $(CPU)/cpu_init.c */
706 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
707 void cpu_init_f (volatile immap_t *immr);
708 #endif
709 #if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx)
710 void cpu_init_f (void);
711 #endif
712 #ifdef CONFIG_MPC85xx
713 ulong cpu_init_f(void);
714 #endif
715
716 int cpu_init_r (void);
717 #if defined(CONFIG_MPC8260)
718 int prt_8260_rsr (void);
719 #elif defined(CONFIG_MPC83xx)
720 int prt_83xx_rsr (void);
721 #endif
722
723 /* $(CPU)/interrupts.c */
724 int interrupt_init (void);
725 void timer_interrupt (struct pt_regs *);
726 void external_interrupt (struct pt_regs *);
727 void irq_install_handler(int, interrupt_handler_t *, void *);
728 void irq_free_handler (int);
729 void reset_timer (void);
730 ulong get_timer (ulong base);
731
732 /* Return value of monotonic microsecond timer */
733 unsigned long timer_get_us(void);
734
735 void enable_interrupts (void);
736 int disable_interrupts (void);
737
738 /* $(CPU)/.../commproc.c */
739 int dpram_init (void);
740 uint dpram_base(void);
741 uint dpram_base_align(uint align);
742 uint dpram_alloc(uint size);
743 uint dpram_alloc_align(uint size,uint align);
744 void bootcount_store (ulong);
745 ulong bootcount_load (void);
746 #define BOOTCOUNT_MAGIC 0xB001C041
747
748 /* $(CPU)/.../<eth> */
749 void mii_init (void);
750
751 /* $(CPU)/.../lcd.c */
752 ulong lcd_setmem (ulong);
753
754 /* $(CPU)/.../video.c */
755 ulong video_setmem (ulong);
756
757 /* arch/$(ARCH)/lib/cache.c */
758 void enable_caches(void);
759 void flush_cache (unsigned long, unsigned long);
760 void flush_dcache_all(void);
761 void flush_dcache_range(unsigned long start, unsigned long stop);
762 void invalidate_dcache_range(unsigned long start, unsigned long stop);
763 void invalidate_dcache_all(void);
764 void invalidate_icache_all(void);
765
766 enum {
767 /* Disable caches (else flush caches but leave them active) */
768 CBL_DISABLE_CACHES = 1 << 0,
769 CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1,
770
771 CBL_ALL = 3,
772 };
773
774 /**
775 * Clean up ready for linux
776 *
777 * @param flags Flags to control what is done
778 */
779 int cleanup_before_linux_select(int flags);
780
781 /* arch/$(ARCH)/lib/ticks.S */
782 uint64_t get_ticks(void);
783 void wait_ticks (unsigned long);
784
785 /* arch/$(ARCH)/lib/time.c */
786 void __udelay (unsigned long);
787 ulong usec2ticks (unsigned long usec);
788 ulong ticks2usec (unsigned long ticks);
789 int init_timebase (void);
790
791 /* lib/gunzip.c */
792 int gunzip(void *, int, unsigned char *, unsigned long *);
793 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
794 int stoponerr, int offset);
795
796 /**
797 * gzwrite progress indicators: defined weak to allow board-specific
798 * overrides:
799 *
800 * gzwrite_progress_init called on startup
801 * gzwrite_progress called during decompress/write loop
802 * gzwrite_progress_finish called at end of loop to
803 * indicate success (retcode=0) or failure
804 */
805 void gzwrite_progress_init(u64 expected_size);
806
807 void gzwrite_progress(int iteration,
808 u64 bytes_written,
809 u64 total_bytes);
810
811 void gzwrite_progress_finish(int retcode,
812 u64 totalwritten,
813 u64 totalsize,
814 u32 expected_crc,
815 u32 calculated_crc);
816
817 /**
818 * decompress and write gzipped image from memory to block device
819 *
820 * @param src compressed image address
821 * @param len compressed image length in bytes
822 * @param dev block device descriptor
823 * @param szwritebuf bytes per write (pad to erase size)
824 * @param startoffs offset in bytes of first write
825 * @param szexpected expected uncompressed length
826 * may be zero to use gzip trailer
827 * for files under 4GiB
828 */
829 int gzwrite(unsigned char *src, int len,
830 struct block_dev_desc *dev,
831 unsigned long szwritebuf,
832 u64 startoffs,
833 u64 szexpected);
834
835 /* lib/lz4_wrapper.c */
836 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
837
838 /* lib/qsort.c */
839 void qsort(void *base, size_t nmemb, size_t size,
840 int(*compar)(const void *, const void *));
841 int strcmp_compar(const void *, const void *);
842
843 /* lib/time.c */
844 void udelay (unsigned long);
845 void mdelay(unsigned long);
846
847 /* lib/uuid.c */
848 #include <uuid.h>
849
850 /* lib/vsprintf.c */
851 #include <vsprintf.h>
852
853 /* lib/strmhz.c */
854 char * strmhz(char *buf, unsigned long hz);
855
856 /* lib/crc32.c */
857 #include <u-boot/crc.h>
858
859 /* lib/rand.c */
860 #define RAND_MAX -1U
861 void srand(unsigned int seed);
862 unsigned int rand(void);
863 unsigned int rand_r(unsigned int *seedp);
864
865 /* common/console.c */
866 int console_init_f(void); /* Before relocation; uses the serial stuff */
867 int console_init_r(void); /* After relocation; uses the console stuff */
868 int console_assign(int file, const char *devname); /* Assign the console */
869 int ctrlc (void);
870 int had_ctrlc (void); /* have we had a Control-C since last clear? */
871 void clear_ctrlc (void); /* clear the Control-C condition */
872 int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */
873 int confirm_yesno(void); /* 1 if input is "y", "Y", "yes" or "YES" */
874 /*
875 * STDIO based functions (can always be used)
876 */
877 /* serial stuff */
878 int serial_printf (const char *fmt, ...)
879 __attribute__ ((format (__printf__, 1, 2)));
880 /* stdin */
881 int getc(void);
882 int tstc(void);
883
884 /* stdout */
885 #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT)
886 #define putc(...) do { } while (0)
887 #define puts(...) do { } while (0)
888 #define printf(...) do { } while (0)
889 #define vprintf(...) do { } while (0)
890 #else
891 void putc(const char c);
892 void puts(const char *s);
893 int printf(const char *fmt, ...)
894 __attribute__ ((format (__printf__, 1, 2)));
895 int vprintf(const char *fmt, va_list args);
896 #endif
897
898 /* stderr */
899 #define eputc(c) fputc(stderr, c)
900 #define eputs(s) fputs(stderr, s)
901 #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args)
902
903 /*
904 * FILE based functions (can only be used AFTER relocation!)
905 */
906 #define stdin 0
907 #define stdout 1
908 #define stderr 2
909 #define MAX_FILES 3
910
911 int fprintf(int file, const char *fmt, ...)
912 __attribute__ ((format (__printf__, 2, 3)));
913 void fputs(int file, const char *s);
914 void fputc(int file, const char c);
915 int ftstc(int file);
916 int fgetc(int file);
917
918 /* lib/gzip.c */
919 int gzip(void *dst, unsigned long *lenp,
920 unsigned char *src, unsigned long srclen);
921 int zzip(void *dst, unsigned long *lenp, unsigned char *src,
922 unsigned long srclen, int stoponerr,
923 int (*func)(unsigned long, unsigned long));
924
925 /* lib/net_utils.c */
926 #include <net.h>
927 static inline struct in_addr getenv_ip(char *var)
928 {
929 return string_to_ip(getenv(var));
930 }
931
932 /*
933 * CONSOLE multiplexing.
934 */
935 #ifdef CONFIG_CONSOLE_MUX
936 #include <iomux.h>
937 #endif
938
939 int pcmcia_init (void);
940
941 #ifdef CONFIG_STATUS_LED
942 # include <status_led.h>
943 #endif
944
945 #include <bootstage.h>
946
947 #ifdef CONFIG_SHOW_ACTIVITY
948 void show_activity(int arg);
949 #endif
950
951 /* Multicore arch functions */
952 #ifdef CONFIG_MP
953 int cpu_status(int nr);
954 int cpu_reset(int nr);
955 int cpu_disable(int nr);
956 int cpu_release(int nr, int argc, char * const argv[]);
957 #endif
958
959 #endif /* __ASSEMBLY__ */
960
961 #ifdef CONFIG_PPC
962 /*
963 * Has to be included outside of the #ifndef __ASSEMBLY__ section.
964 * Otherwise might lead to compilation errors in assembler files.
965 */
966 #include <asm/cache.h>
967 #endif
968
969 /* Put only stuff here that the assembler can digest */
970
971 #ifdef CONFIG_POST
972 #define CONFIG_HAS_POST
973 #ifndef CONFIG_POST_ALT_LIST
974 #define CONFIG_POST_STD_LIST
975 #endif
976 #endif
977
978 #ifdef CONFIG_INIT_CRITICAL
979 #error CONFIG_INIT_CRITICAL is deprecated!
980 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
981 #endif
982
983 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
984
985 /*
986 * check_member() - Check the offset of a structure member
987 *
988 * @structure: Name of structure (e.g. global_data)
989 * @member: Name of member (e.g. baudrate)
990 * @offset: Expected offset in bytes
991 */
992 #define check_member(structure, member, offset) _Static_assert( \
993 offsetof(struct structure, member) == offset, \
994 "`struct " #structure "` offset for `" #member "` is not " #offset)
995
996 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
997 #ifdef CONFIG_EFI_STUB
998 #define ll_boot_init() false
999 #else
1000 #define ll_boot_init() true
1001 #endif
1002
1003 /* Pull in stuff for the build system */
1004 #ifdef DO_DEPS_ONLY
1005 # include <environment.h>
1006 #endif
1007
1008 #endif /* __COMMON_H_ */