include/common.h

   1 /*
   2  * (C) Copyright 2000-2009
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __COMMON_H_
   9 #define __COMMON_H_     1
  10
  11 #ifndef __ASSEMBLY__            /* put C only stuff in this section */
  12
  13 typedef unsigned char           uchar;
  14 typedef volatile unsigned long  vu_long;
  15 typedef volatile unsigned short vu_short;
  16 typedef volatile unsigned char  vu_char;
  17
  18 /* Allow sharing constants with type modifiers between C and assembly. */
  19 #define _AC(X, Y)       (X##Y)
  20
  21 #include <config.h>
  22 #include <errno.h>
  23 #include <time.h>
  24 #include <asm-offsets.h>
  25 #include <linux/bitops.h>
  26 #include <linux/delay.h>
  27 #include <linux/types.h>
  28 #include <linux/string.h>
  29 #include <linux/stringify.h>
  30 #include <asm/ptrace.h>
  31 #include <stdarg.h>
  32 #include <linux/kernel.h>
  33 #if defined(CONFIG_8xx)
  34 #include <asm/8xx_immap.h>
  35 #if defined(CONFIG_MPC859)      || defined(CONFIG_MPC859T)      || \
  36     defined(CONFIG_MPC866)      || \
  37     defined(CONFIG_MPC866P)
  38 # define CONFIG_MPC866_FAMILY 1
  39 #elif defined(CONFIG_MPC885)
  40 # define CONFIG_MPC885_FAMILY   1
  41 #endif
  42 #if   defined(CONFIG_MPC860)       \
  43    || defined(CONFIG_MPC860T)      \
  44    || defined(CONFIG_MPC866_FAMILY) \
  45    || defined(CONFIG_MPC885_FAMILY)
  46 # define CONFIG_MPC86x 1
  47 #endif
  48 #elif defined(CONFIG_5xx)
  49 #include <asm/5xx_immap.h>
  50 #elif defined(CONFIG_MPC5xxx)
  51 #include <mpc5xxx.h>
  52 #elif defined(CONFIG_MPC512X)
  53 #include <asm/immap_512x.h>
  54 #elif defined(CONFIG_MPC8260)
  55 #if   defined(CONFIG_MPC8247) \
  56    || defined(CONFIG_MPC8272)
  57 #define CONFIG_MPC8272_FAMILY   1
  58 #endif
  59 #include <asm/immap_8260.h>
  60 #endif
  61 #ifdef CONFIG_MPC86xx
  62 #include <mpc86xx.h>
  63 #include <asm/immap_86xx.h>
  64 #endif
  65 #ifdef CONFIG_MPC85xx
  66 #include <mpc85xx.h>
  67 #include <asm/immap_85xx.h>
  68 #endif
  69 #ifdef CONFIG_MPC83xx
  70 #include <mpc83xx.h>
  71 #include <asm/immap_83xx.h>
  72 #endif
  73 #ifdef  CONFIG_4xx
  74 #include <asm/ppc4xx.h>
  75 #endif
  76 #ifdef CONFIG_SOC_DA8XX
  77 #include <asm/arch/hardware.h>
  78 #endif
  79 #ifdef CONFIG_FSL_LSCH3
  80 #include <asm/arch/immap_lsch3.h>
  81 #endif
  82 #ifdef CONFIG_FSL_LSCH2
  83 #include <asm/arch/immap_lsch2.h>
  84 #endif
  85
  86 #include <part.h>
  87 #include <flash.h>
  88 #include <image.h>
  89
  90 /* Bring in printf format macros if inttypes.h is included */
  91 #define __STDC_FORMAT_MACROS
  92
  93 #ifdef __LP64__
  94 #define CONFIG_SYS_SUPPORT_64BIT_DATA
  95 #endif
  96
  97 #ifdef DEBUG
  98 #define _DEBUG  1
  99 #else
 100 #define _DEBUG  0
 101 #endif
 102
 103 #ifdef CONFIG_SPL_BUILD
 104 #define _SPL_BUILD      1
 105 #else
 106 #define _SPL_BUILD      0
 107 #endif
 108
 109 /* Define this at the top of a file to add a prefix to debug messages */
 110 #ifndef pr_fmt
 111 #define pr_fmt(fmt) fmt
 112 #endif
 113
 114 /*
 115  * Output a debug text when condition "cond" is met. The "cond" should be
 116  * computed by a preprocessor in the best case, allowing for the best
 117  * optimization.
 118  */
 119 #define debug_cond(cond, fmt, args...)                  \
 120         do {                                            \
 121                 if (cond)                               \
 122                         printf(pr_fmt(fmt), ##args);    \
 123         } while (0)
 124
 125 /* Show a message if DEBUG is defined in a file */
 126 #define debug(fmt, args...)                     \
 127         debug_cond(_DEBUG, fmt, ##args)
 128
 129 /* Show a message if not in SPL */
 130 #define warn_non_spl(fmt, args...)                      \
 131         debug_cond(!_SPL_BUILD, fmt, ##args)
 132
 133 /*
 134  * An assertion is run-time check done in debug mode only. If DEBUG is not
 135  * defined then it is skipped. If DEBUG is defined and the assertion fails,
 136  * then it calls panic*( which may or may not reset/halt U-Boot (see
 137  * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
 138  * before release, and after release it is hoped that they don't matter. But
 139  * in any case these failing assertions cannot be fixed with a reset (which
 140  * may just do the same assertion again).
 141  */
 142 void __assert_fail(const char *assertion, const char *file, unsigned line,
 143                    const char *function);
 144 #define assert(x) \
 145         ({ if (!(x) && _DEBUG) \
 146                 __assert_fail(#x, __FILE__, __LINE__, __func__); })
 147
 148 #define error(fmt, args...) do {                                        \
 149                 printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n",       \
 150                         ##args, __FILE__, __LINE__, __func__);          \
 151 } while (0)
 152
 153 #ifndef BUG
 154 #define BUG() do { \
 155         printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
 156         panic("BUG!"); \
 157 } while (0)
 158 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
 159 #endif /* BUG */
 160
 161 typedef void (interrupt_handler_t)(void *);
 162
 163 #include <asm/u-boot.h> /* boot information for Linux kernel */
 164 #include <asm/global_data.h>    /* global data used for startup functions */
 165
 166 /*
 167  * enable common handling for all TQM8xxL/M boards:
 168  * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
 169  * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
 170  *                  and for the TQM885D board
 171  */
 172 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
 173     defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
 174     defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
 175 # ifndef CONFIG_TQM8xxM
 176 #  define CONFIG_TQM8xxM
 177 # endif
 178 #endif
 179 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
 180     defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
 181     defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
 182     defined(CONFIG_TQM885D)
 183 # ifndef CONFIG_TQM8xxL
 184 #  define CONFIG_TQM8xxL
 185 # endif
 186 #endif
 187
 188 #if defined(CONFIG_ENV_IS_EMBEDDED)
 189 #define TOTAL_MALLOC_LEN        CONFIG_SYS_MALLOC_LEN
 190 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
 191         (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
 192       defined(CONFIG_ENV_IS_IN_NVRAM)
 193 #define TOTAL_MALLOC_LEN        (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
 194 #else
 195 #define TOTAL_MALLOC_LEN        CONFIG_SYS_MALLOC_LEN
 196 #endif
 197
 198 /*
 199  * Function Prototypes
 200  */
 201 int dram_init(void);
 202
 203 /**
 204  * dram_init_banksize() - Set up DRAM bank sizes
 205  *
 206  * This can be implemented by boards to set up the DRAM bank information in
 207  * gd->bd->bi_dram(). It is called just before relocation, after dram_init()
 208  * is called.
 209  *
 210  * If this is not provided, a default implementation will try to set up a
 211  * single bank. It will do this if CONFIG_NR_DRAM_BANKS and
 212  * CONFIG_SYS_SDRAM_BASE are set. The bank will have a start address of
 213  * CONFIG_SYS_SDRAM_BASE and the size will be determined by a call to
 214  * get_effective_memsize().
 215  *
 216  * @return 0 if OK, -ve on error
 217  */
 218 int dram_init_banksize(void);
 219
 220 void    hang            (void) __attribute__ ((noreturn));
 221
 222 int     timer_init(void);
 223 int     cpu_init(void);
 224
 225 #include <display_options.h>
 226
 227 /* common/main.c */
 228 void    main_loop       (void);
 229 int run_command(const char *cmd, int flag);
 230 int run_command_repeatable(const char *cmd, int flag);
 231
 232 /**
 233  * Run a list of commands separated by ; or even \0
 234  *
 235  * Note that if 'len' is not -1, then the command does not need to be nul
 236  * terminated, Memory will be allocated for the command in that case.
 237  *
 238  * @param cmd   List of commands to run, each separated bu semicolon
 239  * @param len   Length of commands excluding terminator if known (-1 if not)
 240  * @param flag  Execution flags (CMD_FLAG_...)
 241  * @return 0 on success, or != 0 on error.
 242  */
 243 int run_command_list(const char *cmd, int len, int flag);
 244
 245 /* arch/$(ARCH)/lib/board.c */
 246 void board_init_f(ulong);
 247 void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
 248
 249 /**
 250  * ulong board_init_f_alloc_reserve - allocate reserved area
 251  *
 252  * This function is called by each architecture very early in the start-up
 253  * code to allow the C runtime to reserve space on the stack for writable
 254  * 'globals' such as GD and the malloc arena.
 255  *
 256  * @top:        top of the reserve area, growing down.
 257  * @return:     bottom of reserved area
 258  */
 259 ulong board_init_f_alloc_reserve(ulong top);
 260
 261 /**
 262  * board_init_f_init_reserve - initialize the reserved area(s)
 263  *
 264  * This function is called once the C runtime has allocated the reserved
 265  * area on the stack. It must initialize the GD at the base of that area.
 266  *
 267  * @base:       top from which reservation was done
 268  */
 269 void board_init_f_init_reserve(ulong base);
 270
 271 /**
 272  * arch_setup_gd() - Set up the global_data pointer
 273  *
 274  * This pointer is special in some architectures and cannot easily be assigned
 275  * to. For example on x86 it is implemented by adding a specific record to its
 276  * Global Descriptor Table! So we we provide a function to carry out this task.
 277  * For most architectures this can simply be:
 278  *
 279  *    gd = gd_ptr;
 280  *
 281  * @gd_ptr:     Pointer to global data
 282  */
 283 void arch_setup_gd(gd_t *gd_ptr);
 284
 285 int checkboard(void);
 286 int show_board_info(void);
 287 int checkflash(void);
 288 int checkdram(void);
 289 int last_stage_init(void);
 290 extern ulong monitor_flash_len;
 291 int mac_read_from_eeprom(void);
 292 extern u8 __dtb_dt_begin[];     /* embedded device tree blob */
 293 int set_cpu_clk_info(void);
 294 int mdm_init(void);
 295 int print_cpuinfo(void);
 296 int update_flash_size(int flash_size);
 297 int arch_early_init_r(void);
 298
 299 /*
 300  * setup_board_extra() - Fill in extra details in the bd_t structure
 301  *
 302  * @return 0 if OK, -ve on error
 303  */
 304 int setup_board_extra(void);
 305
 306 /**
 307  * arch_fsp_init() - perform firmware support package init
 308  *
 309  * Where U-Boot relies on binary blobs to handle part of the system init, this
 310  * function can be used to set up the blobs. This is used on some Intel
 311  * platforms.
 312  */
 313 int arch_fsp_init(void);
 314
 315 /**
 316  * arch_cpu_init_dm() - init CPU after driver model is available
 317  *
 318  * This is called immediately after driver model is available before
 319  * relocation. This is similar to arch_cpu_init() but is able to reference
 320  * devices
 321  *
 322  * @return 0 if OK, -ve on error
 323  */
 324 int arch_cpu_init_dm(void);
 325
 326 /**
 327  * Reserve all necessary stacks
 328  *
 329  * This is used in generic board init sequence in common/board_f.c. Each
 330  * architecture could provide this function to tailor the required stacks.
 331  *
 332  * On entry gd->start_addr_sp is pointing to the suggested top of the stack.
 333  * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures
 334  * require only this can leave it untouched.
 335  *
 336  * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective
 337  * positions of the stack. The stack pointer(s) will be set to this later.
 338  * gd->irq_sp is only required, if the architecture needs it.
 339  *
 340  * @return 0 if no error
 341  */
 342 __weak int arch_reserve_stacks(void);
 343
 344 /**
 345  * Show the DRAM size in a board-specific way
 346  *
 347  * This is used by boards to display DRAM information in their own way.
 348  *
 349  * @param size  Size of DRAM (which should be displayed along with other info)
 350  */
 351 void board_show_dram(phys_size_t size);
 352
 353 /**
 354  * arch_fixup_fdt() - Write arch-specific information to fdt
 355  *
 356  * Defined in arch/$(ARCH)/lib/bootm-fdt.c
 357  *
 358  * @blob:       FDT blob to write to
 359  * @return 0 if ok, or -ve FDT_ERR_... on failure
 360  */
 361 int arch_fixup_fdt(void *blob);
 362
 363 /* common/flash.c */
 364 void flash_perror (int);
 365
 366 /* common/cmd_source.c */
 367 int     source (ulong addr, const char *fit_uname);
 368
 369 extern ulong load_addr;         /* Default Load Address */
 370 extern ulong save_addr;         /* Default Save Address */
 371 extern ulong save_size;         /* Default Save Size */
 372
 373 /* common/cmd_net.c */
 374 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 375
 376 /* common/cmd_fat.c */
 377 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
 378
 379 /* common/cmd_ext2.c */
 380 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
 381
 382 /* common/cmd_nvedit.c */
 383 int     env_init     (void);
 384 void    env_relocate (void);
 385 int     envmatch     (uchar *, int);
 386
 387 /* Avoid unfortunate conflict with libc's getenv() */
 388 #ifdef CONFIG_SANDBOX
 389 #define getenv uboot_getenv
 390 #endif
 391 char    *getenv      (const char *);
 392 int     getenv_f     (const char *name, char *buf, unsigned len);
 393 ulong getenv_ulong(const char *name, int base, ulong default_val);
 394
 395 /**
 396  * getenv_hex() - Return an environment variable as a hex value
 397  *
 398  * Decode an environment as a hex number (it may or may not have a 0x
 399  * prefix). If the environment variable cannot be found, or does not start
 400  * with hex digits, the default value is returned.
 401  *
 402  * @varname:            Variable to decode
 403  * @default_val:        Value to return on error
 404  */
 405 ulong getenv_hex(const char *varname, ulong default_val);
 406
 407 /*
 408  * Read an environment variable as a boolean
 409  * Return -1 if variable does not exist (default to true)
 410  */
 411 int getenv_yesno(const char *var);
 412 int     saveenv      (void);
 413 int     setenv       (const char *, const char *);
 414 int setenv_ulong(const char *varname, ulong value);
 415 int setenv_hex(const char *varname, ulong value);
 416 /**
 417  * setenv_addr - Set an environment variable to an address in hex
 418  *
 419  * @varname:    Environment variable to set
 420  * @addr:       Value to set it to
 421  * @return 0 if ok, 1 on error
 422  */
 423 static inline int setenv_addr(const char *varname, const void *addr)
 424 {
 425         return setenv_hex(varname, (ulong)addr);
 426 }
 427
 428 #ifdef CONFIG_ARM
 429 # include <asm/mach-types.h>
 430 # include <asm/setup.h>
 431 # include <asm/u-boot.h>
 432 #endif /* CONFIG_ARM */
 433
 434 #ifdef CONFIG_AUTO_COMPLETE
 435 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
 436 #endif
 437 int get_env_id (void);
 438
 439 void    pci_init      (void);
 440 void    pci_init_board(void);
 441
 442 int     misc_init_f   (void);
 443 int     misc_init_r   (void);
 444
 445 /* common/exports.c */
 446 void    jumptable_init(void);
 447
 448 /* common/kallsysm.c */
 449 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
 450
 451 /* common/memsize.c */
 452 long    get_ram_size  (long *, long);
 453 phys_size_t get_effective_memsize(void);
 454
 455 /* $(BOARD)/$(BOARD).c */
 456 void    reset_phy     (void);
 457 void    fdc_hw_init   (void);
 458
 459 /* $(BOARD)/eeprom.c */
 460 #ifdef CONFIG_CMD_EEPROM
 461 void eeprom_init  (int bus);
 462 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 463 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 464 #else
 465 /*
 466  * Some EEPROM code is depecated because it used the legacy I2C interface. Add
 467  * some macros here so we don't have to touch every one of those uses
 468  */
 469 #define eeprom_init(bus)
 470 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
 471 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
 472 #endif
 473
 474 /*
 475  * Set this up regardless of board
 476  * type, to prevent errors.
 477  */
 478 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
 479 # define CONFIG_SYS_DEF_EEPROM_ADDR 0
 480 #else
 481 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
 482 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
 483 #endif
 484 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
 485
 486 #if defined(CONFIG_SPI)
 487 extern void spi_init_f (void);
 488 extern void spi_init_r (void);
 489 extern ssize_t spi_read  (uchar *, int, uchar *, int);
 490 extern ssize_t spi_write (uchar *, int, uchar *, int);
 491 #endif
 492
 493 /* $(BOARD)/$(BOARD).c */
 494 int board_early_init_f (void);
 495 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */
 496 int board_late_init (void);
 497 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
 498 int board_early_init_r (void);
 499 void board_poweroff (void);
 500
 501 #if defined(CONFIG_SYS_DRAM_TEST)
 502 int testdram(void);
 503 #endif /* CONFIG_SYS_DRAM_TEST */
 504
 505 /* $(CPU)/start.S */
 506 #if defined(CONFIG_5xx) || \
 507     defined(CONFIG_8xx)
 508 uint    get_immr      (uint);
 509 #endif
 510 #if defined(CONFIG_MPC5xxx)
 511 uint    get_svr       (void);
 512 #endif
 513 uint    get_pvr       (void);
 514 uint    get_svr       (void);
 515 uint    rd_ic_cst     (void);
 516 void    wr_ic_cst     (uint);
 517 void    wr_ic_adr     (uint);
 518 uint    rd_dc_cst     (void);
 519 void    wr_dc_cst     (uint);
 520 void    wr_dc_adr     (uint);
 521 int     icache_status (void);
 522 void    icache_enable (void);
 523 void    icache_disable(void);
 524 int     dcache_status (void);
 525 void    dcache_enable (void);
 526 void    dcache_disable(void);
 527 void    mmu_disable(void);
 528 #if defined(CONFIG_ARM)
 529 void    relocate_code(ulong);
 530 #else
 531 void    relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
 532 #endif
 533 ulong   get_endaddr   (void);
 534 void    trap_init     (ulong);
 535 #if defined (CONFIG_4xx)        || \
 536     defined (CONFIG_MPC5xxx)    || \
 537     defined (CONFIG_MPC85xx)    || \
 538     defined (CONFIG_MPC86xx)    || \
 539     defined (CONFIG_MPC83xx)
 540 unsigned char   in8(unsigned int);
 541 void            out8(unsigned int, unsigned char);
 542 unsigned short  in16(unsigned int);
 543 unsigned short  in16r(unsigned int);
 544 void            out16(unsigned int, unsigned short value);
 545 void            out16r(unsigned int, unsigned short value);
 546 unsigned long   in32(unsigned int);
 547 unsigned long   in32r(unsigned int);
 548 void            out32(unsigned int, unsigned long value);
 549 void            out32r(unsigned int, unsigned long value);
 550 void            ppcDcbf(unsigned long value);
 551 void            ppcDcbi(unsigned long value);
 552 void            ppcSync(void);
 553 void            ppcDcbz(unsigned long value);
 554 #endif
 555 #if defined (CONFIG_MICROBLAZE)
 556 unsigned short  in16(unsigned int);
 557 void            out16(unsigned int, unsigned short value);
 558 #endif
 559
 560 #if defined (CONFIG_MPC83xx)
 561 void            ppcDWload(unsigned int *addr, unsigned int *ret);
 562 void            ppcDWstore(unsigned int *addr, unsigned int *value);
 563 void disable_addr_trans(void);
 564 void enable_addr_trans(void);
 565 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 566 void ddr_enable_ecc(unsigned int dram_size);
 567 #endif
 568 #endif
 569
 570 /* $(CPU)/cpu.c */
 571 static inline int cpumask_next(int cpu, unsigned int mask)
 572 {
 573         for (cpu++; !((1 << cpu) & mask); cpu++)
 574                 ;
 575
 576         return cpu;
 577 }
 578
 579 #define for_each_cpu(iter, cpu, num_cpus, mask) \
 580         for (iter = 0, cpu = cpumask_next(-1, mask); \
 581                 iter < num_cpus; \
 582                 iter++, cpu = cpumask_next(cpu, mask)) \
 583
 584 int     cpu_numcores  (void);
 585 int     cpu_num_dspcores(void);
 586 u32     cpu_mask      (void);
 587 u32     cpu_dsp_mask(void);
 588 int     is_core_valid (unsigned int);
 589
 590 /**
 591  * arch_cpu_init() - basic cpu-dependent setup for an architecture
 592  *
 593  * This is called after early malloc is available. It should handle any
 594  * CPU- or SoC- specific init needed to continue the init sequence. See
 595  * board_f.c for where it is called. If this is not provided, a default
 596  * version (which does nothing) will be used.
 597  */
 598 int arch_cpu_init(void);
 599
 600 int     checkcpu      (void);
 601 int     checkicache   (void);
 602 int     checkdcache   (void);
 603 void    upmconfig     (unsigned int, unsigned int *, unsigned int);
 604 ulong   get_tbclk     (void);
 605 void    reset_misc    (void);
 606 void    reset_cpu     (ulong addr);
 607 void ft_cpu_setup(void *blob, bd_t *bd);
 608 void ft_pci_setup(void *blob, bd_t *bd);
 609
 610 void smp_set_core_boot_addr(unsigned long addr, int corenr);
 611 void smp_kick_all_cpus(void);
 612
 613 /* $(CPU)/serial.c */
 614 int     serial_init   (void);
 615 void    serial_setbrg (void);
 616 void    serial_putc   (const char);
 617 void    serial_putc_raw(const char);
 618 void    serial_puts   (const char *);
 619 int     serial_getc   (void);
 620 int     serial_tstc   (void);
 621
 622 /* These versions take a stdio_dev pointer */
 623 struct stdio_dev;
 624 int serial_stub_getc(struct stdio_dev *sdev);
 625 int serial_stub_tstc(struct stdio_dev *sdev);
 626
 627 /* $(CPU)/speed.c */
 628 int     get_clocks (void);
 629 #if defined(CONFIG_MPC5xxx)
 630 int     prt_mpc5xxx_clks (void);
 631 #endif
 632 #if defined(CONFIG_LH7A40X) || \
 633     defined(CONFIG_EP93XX)
 634 ulong   get_FCLK (void);
 635 ulong   get_HCLK (void);
 636 ulong   get_PCLK (void);
 637 ulong   get_UCLK (void);
 638 #endif
 639 #if defined(CONFIG_LH7A40X)
 640 ulong   get_PLLCLK (void);
 641 #endif
 642 #if defined(CONFIG_IMX)
 643 ulong get_systemPLLCLK(void);
 644 ulong get_FCLK(void);
 645 ulong get_HCLK(void);
 646 ulong get_BCLK(void);
 647 ulong get_PERCLK1(void);
 648 ulong get_PERCLK2(void);
 649 ulong get_PERCLK3(void);
 650 #endif
 651 ulong   get_bus_freq  (ulong);
 652 int get_serial_clock(void);
 653
 654 #if defined(CONFIG_MPC85xx)
 655 typedef MPC85xx_SYS_INFO sys_info_t;
 656 void    get_sys_info  ( sys_info_t * );
 657 void ft_fixup_cpu(void *, u64);
 658 void ft_fixup_num_cores(void *);
 659 #endif
 660 #if defined(CONFIG_MPC86xx)
 661 typedef MPC86xx_SYS_INFO sys_info_t;
 662 void   get_sys_info  ( sys_info_t * );
 663 static inline ulong get_ddr_freq(ulong dummy)
 664 {
 665         return get_bus_freq(dummy);
 666 }
 667 #else
 668 ulong get_ddr_freq(ulong);
 669 #endif
 670
 671 #if defined(CONFIG_4xx)
 672 #  if defined(CONFIG_440)
 673 #       if defined(CONFIG_440SPE)
 674          unsigned long determine_sysper(void);
 675          unsigned long determine_pci_clock_per(void);
 676 #       endif
 677 #  endif
 678 typedef PPC4xx_SYS_INFO sys_info_t;
 679 int     ppc440spe_revB(void);
 680 void    get_sys_info  ( sys_info_t * );
 681 #endif
 682
 683 /* $(CPU)/cpu_init.c */
 684 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
 685 void    cpu_init_f    (volatile immap_t *immr);
 686 #endif
 687 #if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx)
 688 void    cpu_init_f    (void);
 689 #endif
 690 #ifdef CONFIG_MPC85xx
 691 ulong cpu_init_f(void);
 692 #endif
 693
 694 int     cpu_init_r    (void);
 695
 696 /* $(CPU)/interrupts.c */
 697 int     interrupt_init     (void);
 698 void    timer_interrupt    (struct pt_regs *);
 699 void    external_interrupt (struct pt_regs *);
 700 void    irq_install_handler(int, interrupt_handler_t *, void *);
 701 void    irq_free_handler   (int);
 702 void    reset_timer        (void);
 703
 704 /* Return value of monotonic microsecond timer */
 705 unsigned long timer_get_us(void);
 706
 707 void    enable_interrupts  (void);
 708 int     disable_interrupts (void);
 709
 710 /* $(CPU)/.../commproc.c */
 711 int     dpram_init (void);
 712 uint    dpram_base(void);
 713 uint    dpram_base_align(uint align);
 714 uint    dpram_alloc(uint size);
 715 uint    dpram_alloc_align(uint size,uint align);
 716 void    bootcount_store (ulong);
 717 ulong   bootcount_load (void);
 718 #define BOOTCOUNT_MAGIC         0xB001C041
 719
 720 /* $(CPU)/.../<eth> */
 721 void mii_init (void);
 722
 723 /* $(CPU)/.../lcd.c */
 724 ulong   lcd_setmem (ulong);
 725
 726 /* $(CPU)/.../video.c */
 727 ulong   video_setmem (ulong);
 728
 729 /* arch/$(ARCH)/lib/cache.c */
 730 void    enable_caches(void);
 731 void    flush_cache   (unsigned long, unsigned long);
 732 void    flush_dcache_all(void);
 733 void    flush_dcache_range(unsigned long start, unsigned long stop);
 734 void    invalidate_dcache_range(unsigned long start, unsigned long stop);
 735 void    invalidate_dcache_all(void);
 736 void    invalidate_icache_all(void);
 737
 738 enum {
 739         /* Disable caches (else flush caches but leave them active) */
 740         CBL_DISABLE_CACHES              = 1 << 0,
 741         CBL_SHOW_BOOTSTAGE_REPORT       = 1 << 1,
 742
 743         CBL_ALL                         = 3,
 744 };
 745
 746 /**
 747  * Clean up ready for linux
 748  *
 749  * @param flags         Flags to control what is done
 750  */
 751 int cleanup_before_linux_select(int flags);
 752
 753 /* arch/$(ARCH)/lib/ticks.S */
 754 uint64_t get_ticks(void);
 755 void    wait_ticks    (unsigned long);
 756
 757 /* arch/$(ARCH)/lib/time.c */
 758 ulong   usec2ticks    (unsigned long usec);
 759 ulong   ticks2usec    (unsigned long ticks);
 760
 761 /* lib/gunzip.c */
 762 int gunzip(void *, int, unsigned char *, unsigned long *);
 763 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
 764                                                 int stoponerr, int offset);
 765
 766 /**
 767  * gzwrite progress indicators: defined weak to allow board-specific
 768  * overrides:
 769  *
 770  *      gzwrite_progress_init called on startup
 771  *      gzwrite_progress called during decompress/write loop
 772  *      gzwrite_progress_finish called at end of loop to
 773  *              indicate success (retcode=0) or failure
 774  */
 775 void gzwrite_progress_init(u64 expected_size);
 776
 777 void gzwrite_progress(int iteration,
 778                      u64 bytes_written,
 779                      u64 total_bytes);
 780
 781 void gzwrite_progress_finish(int retcode,
 782                              u64 totalwritten,
 783                              u64 totalsize,
 784                              u32 expected_crc,
 785                              u32 calculated_crc);
 786
 787 /**
 788  * decompress and write gzipped image from memory to block device
 789  *
 790  * @param       src             compressed image address
 791  * @param       len             compressed image length in bytes
 792  * @param       dev             block device descriptor
 793  * @param       szwritebuf      bytes per write (pad to erase size)
 794  * @param       startoffs       offset in bytes of first write
 795  * @param       szexpected      expected uncompressed length
 796  *                              may be zero to use gzip trailer
 797  *                              for files under 4GiB
 798  */
 799 int gzwrite(unsigned char *src, int len,
 800             struct blk_desc *dev,
 801             unsigned long szwritebuf,
 802             u64 startoffs,
 803             u64 szexpected);
 804
 805 /* lib/lz4_wrapper.c */
 806 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
 807
 808 /* lib/qsort.c */
 809 void qsort(void *base, size_t nmemb, size_t size,
 810            int(*compar)(const void *, const void *));
 811 int strcmp_compar(const void *, const void *);
 812
 813 /* lib/uuid.c */
 814 #include <uuid.h>
 815
 816 /* lib/vsprintf.c */
 817 #include <vsprintf.h>
 818
 819 /* lib/strmhz.c */
 820 char *  strmhz(char *buf, unsigned long hz);
 821
 822 /* lib/crc32.c */
 823 #include <u-boot/crc.h>
 824
 825 /* lib/rand.c */
 826 #define RAND_MAX -1U
 827 void srand(unsigned int seed);
 828 unsigned int rand(void);
 829 unsigned int rand_r(unsigned int *seedp);
 830
 831 /*
 832  * STDIO based functions (can always be used)
 833  */
 834 /* serial stuff */
 835 int     serial_printf (const char *fmt, ...)
 836                 __attribute__ ((format (__printf__, 1, 2)));
 837 /* stdin */
 838 int     getc(void);
 839 int     tstc(void);
 840
 841 /* stdout */
 842 #if !defined(CONFIG_SPL_BUILD) || \
 843         (defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_SERIAL_SUPPORT)) || \
 844         (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) && \
 845                 defined(CONFIG_SPL_SERIAL_SUPPORT))
 846 void    putc(const char c);
 847 void    puts(const char *s);
 848 int     printf(const char *fmt, ...)
 849                 __attribute__ ((format (__printf__, 1, 2)));
 850 int     vprintf(const char *fmt, va_list args);
 851 #else
 852 #define putc(...) do { } while (0)
 853 #define puts(...) do { } while (0)
 854 #define printf(...) do { } while (0)
 855 #define vprintf(...) do { } while (0)
 856 #endif
 857
 858 /* stderr */
 859 #define eputc(c)                fputc(stderr, c)
 860 #define eputs(s)                fputs(stderr, s)
 861 #define eprintf(fmt,args...)    fprintf(stderr,fmt ,##args)
 862
 863 /*
 864  * FILE based functions (can only be used AFTER relocation!)
 865  */
 866 #define stdin           0
 867 #define stdout          1
 868 #define stderr          2
 869 #define MAX_FILES       3
 870
 871 int     fprintf(int file, const char *fmt, ...)
 872                 __attribute__ ((format (__printf__, 2, 3)));
 873 void    fputs(int file, const char *s);
 874 void    fputc(int file, const char c);
 875 int     ftstc(int file);
 876 int     fgetc(int file);
 877
 878 /* lib/gzip.c */
 879 int gzip(void *dst, unsigned long *lenp,
 880                 unsigned char *src, unsigned long srclen);
 881 int zzip(void *dst, unsigned long *lenp, unsigned char *src,
 882                 unsigned long srclen, int stoponerr,
 883                 int (*func)(unsigned long, unsigned long));
 884
 885 /* lib/net_utils.c */
 886 #include <net.h>
 887 static inline struct in_addr getenv_ip(char *var)
 888 {
 889         return string_to_ip(getenv(var));
 890 }
 891
 892 int     pcmcia_init (void);
 893
 894 #ifdef CONFIG_LED_STATUS
 895 # include <status_led.h>
 896 #endif
 897
 898 #include <bootstage.h>
 899
 900 #ifdef CONFIG_SHOW_ACTIVITY
 901 void show_activity(int arg);
 902 #endif
 903
 904 /* Multicore arch functions */
 905 #ifdef CONFIG_MP
 906 int cpu_status(int nr);
 907 int cpu_reset(int nr);
 908 int cpu_disable(int nr);
 909 int cpu_release(int nr, int argc, char * const argv[]);
 910 #endif
 911
 912 #else   /* __ASSEMBLY__ */
 913
 914 /* Drop a C type modifier (like in 3UL) for constants used in assembly. */
 915 #define _AC(X, Y)       X
 916
 917 #endif  /* __ASSEMBLY__ */
 918
 919 #ifdef CONFIG_PPC
 920 /*
 921  * Has to be included outside of the #ifndef __ASSEMBLY__ section.
 922  * Otherwise might lead to compilation errors in assembler files.
 923  */
 924 #include <asm/cache.h>
 925 #endif
 926
 927 /* Put only stuff here that the assembler can digest */
 928
 929 /* Declare an unsigned long constant digestable both by C and an assembler. */
 930 #define UL(x)           _AC(x, UL)
 931
 932 #ifdef CONFIG_POST
 933 #define CONFIG_HAS_POST
 934 #ifndef CONFIG_POST_ALT_LIST
 935 #define CONFIG_POST_STD_LIST
 936 #endif
 937 #endif
 938
 939 #ifdef CONFIG_INIT_CRITICAL
 940 #error CONFIG_INIT_CRITICAL is deprecated!
 941 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
 942 #endif
 943
 944 #define ROUND(a,b)              (((a) + (b) - 1) & ~((b) - 1))
 945
 946 /*
 947  * check_member() - Check the offset of a structure member
 948  *
 949  * @structure:  Name of structure (e.g. global_data)
 950  * @member:     Name of member (e.g. baudrate)
 951  * @offset:     Expected offset in bytes
 952  */
 953 #define check_member(structure, member, offset) _Static_assert( \
 954         offsetof(struct structure, member) == offset, \
 955         "`struct " #structure "` offset for `" #member "` is not " #offset)
 956
 957 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
 958 #ifdef CONFIG_EFI_STUB
 959 #define ll_boot_init()  false
 960 #else
 961 #define ll_boot_init()  true
 962 #endif
 963
 964 /* Pull in stuff for the build system */
 965 #ifdef DO_DEPS_ONLY
 966 # include <environment.h>
 967 #endif
 968
 969 #endif  /* __COMMON_H_ */