include/common.h

   1 /*
   2  * (C) Copyright 2000-2009
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __COMMON_H_
   9 #define __COMMON_H_     1
  10
  11 #ifndef __ASSEMBLY__            /* put C only stuff in this section */
  12
  13 typedef unsigned char           uchar;
  14 typedef volatile unsigned long  vu_long;
  15 typedef volatile unsigned short vu_short;
  16 typedef volatile unsigned char  vu_char;
  17
  18 #include <config.h>
  19 #include <asm-offsets.h>
  20 #include <linux/bitops.h>
  21 #include <linux/types.h>
  22 #include <linux/string.h>
  23 #include <linux/stringify.h>
  24 #include <asm/ptrace.h>
  25 #include <stdarg.h>
  26 #include <linux/kernel.h>
  27 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
  28 #include <pci.h>
  29 #endif
  30 #if defined(CONFIG_8xx)
  31 #include <asm/8xx_immap.h>
  32 #if defined(CONFIG_MPC859)      || defined(CONFIG_MPC859T)      || \
  33     defined(CONFIG_MPC866)      || \
  34     defined(CONFIG_MPC866P)
  35 # define CONFIG_MPC866_FAMILY 1
  36 #elif defined(CONFIG_MPC885)
  37 # define CONFIG_MPC885_FAMILY   1
  38 #endif
  39 #if   defined(CONFIG_MPC860)       \
  40    || defined(CONFIG_MPC860T)      \
  41    || defined(CONFIG_MPC866_FAMILY) \
  42    || defined(CONFIG_MPC885_FAMILY)
  43 # define CONFIG_MPC86x 1
  44 #endif
  45 #elif defined(CONFIG_5xx)
  46 #include <asm/5xx_immap.h>
  47 #elif defined(CONFIG_MPC5xxx)
  48 #include <mpc5xxx.h>
  49 #elif defined(CONFIG_MPC512X)
  50 #include <asm/immap_512x.h>
  51 #elif defined(CONFIG_MPC8260)
  52 #if   defined(CONFIG_MPC8247) \
  53    || defined(CONFIG_MPC8272)
  54 #define CONFIG_MPC8272_FAMILY   1
  55 #endif
  56 #include <asm/immap_8260.h>
  57 #endif
  58 #ifdef CONFIG_MPC86xx
  59 #include <mpc86xx.h>
  60 #include <asm/immap_86xx.h>
  61 #endif
  62 #ifdef CONFIG_MPC85xx
  63 #include <mpc85xx.h>
  64 #include <asm/immap_85xx.h>
  65 #endif
  66 #ifdef CONFIG_MPC83xx
  67 #include <mpc83xx.h>
  68 #include <asm/immap_83xx.h>
  69 #endif
  70 #ifdef  CONFIG_4xx
  71 #include <asm/ppc4xx.h>
  72 #endif
  73 #ifdef CONFIG_BLACKFIN
  74 #include <asm/blackfin.h>
  75 #endif
  76 #ifdef CONFIG_SOC_DA8XX
  77 #include <asm/arch/hardware.h>
  78 #endif
  79 #ifdef CONFIG_FSL_LSCH3
  80 #include <asm/arch/immap_lsch3.h>
  81 #endif
  82 #ifdef CONFIG_FSL_LSCH2
  83 #include <asm/arch/immap_lsch2.h>
  84 #endif
  85
  86 #include <part.h>
  87 #include <flash.h>
  88 #include <image.h>
  89
  90 /* Bring in printf format macros if inttypes.h is included */
  91 #define __STDC_FORMAT_MACROS
  92
  93 #ifdef __LP64__
  94 #define CONFIG_SYS_SUPPORT_64BIT_DATA
  95 #endif
  96
  97 #ifdef DEBUG
  98 #define _DEBUG  1
  99 #else
 100 #define _DEBUG  0
 101 #endif
 102
 103 #ifndef pr_fmt
 104 #define pr_fmt(fmt) fmt
 105 #endif
 106
 107 /*
 108  * Output a debug text when condition "cond" is met. The "cond" should be
 109  * computed by a preprocessor in the best case, allowing for the best
 110  * optimization.
 111  */
 112 #define debug_cond(cond, fmt, args...)                  \
 113         do {                                            \
 114                 if (cond)                               \
 115                         printf(pr_fmt(fmt), ##args);    \
 116         } while (0)
 117
 118 #define debug(fmt, args...)                     \
 119         debug_cond(_DEBUG, fmt, ##args)
 120
 121 /*
 122  * An assertion is run-time check done in debug mode only. If DEBUG is not
 123  * defined then it is skipped. If DEBUG is defined and the assertion fails,
 124  * then it calls panic*( which may or may not reset/halt U-Boot (see
 125  * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
 126  * before release, and after release it is hoped that they don't matter. But
 127  * in any case these failing assertions cannot be fixed with a reset (which
 128  * may just do the same assertion again).
 129  */
 130 void __assert_fail(const char *assertion, const char *file, unsigned line,
 131                    const char *function);
 132 #define assert(x) \
 133         ({ if (!(x) && _DEBUG) \
 134                 __assert_fail(#x, __FILE__, __LINE__, __func__); })
 135
 136 #define error(fmt, args...) do {                                        \
 137                 printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n",       \
 138                         ##args, __FILE__, __LINE__, __func__);          \
 139 } while (0)
 140
 141 #ifndef BUG
 142 #define BUG() do { \
 143         printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
 144         panic("BUG!"); \
 145 } while (0)
 146 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
 147 #endif /* BUG */
 148
 149 /* Force a compilation error if condition is true */
 150 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
 151
 152 typedef void (interrupt_handler_t)(void *);
 153
 154 #include <asm/u-boot.h> /* boot information for Linux kernel */
 155 #include <asm/global_data.h>    /* global data used for startup functions */
 156
 157 /*
 158  * enable common handling for all TQM8xxL/M boards:
 159  * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
 160  * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
 161  *                  and for the TQM885D board
 162  */
 163 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
 164     defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
 165     defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
 166 # ifndef CONFIG_TQM8xxM
 167 #  define CONFIG_TQM8xxM
 168 # endif
 169 #endif
 170 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
 171     defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
 172     defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
 173     defined(CONFIG_TQM885D)
 174 # ifndef CONFIG_TQM8xxL
 175 #  define CONFIG_TQM8xxL
 176 # endif
 177 #endif
 178
 179 #if defined(CONFIG_ENV_IS_EMBEDDED)
 180 #define TOTAL_MALLOC_LEN        CONFIG_SYS_MALLOC_LEN
 181 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
 182         (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
 183       defined(CONFIG_ENV_IS_IN_NVRAM)
 184 #define TOTAL_MALLOC_LEN        (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
 185 #else
 186 #define TOTAL_MALLOC_LEN        CONFIG_SYS_MALLOC_LEN
 187 #endif
 188
 189 /*
 190  * Function Prototypes
 191  */
 192 int dram_init(void);
 193
 194 void    hang            (void) __attribute__ ((noreturn));
 195
 196 int     timer_init(void);
 197 int     cpu_init(void);
 198
 199 /* */
 200 phys_size_t initdram (int);
 201
 202 #include <display_options.h>
 203
 204 /* common/main.c */
 205 void    main_loop       (void);
 206 int run_command(const char *cmd, int flag);
 207 int run_command_repeatable(const char *cmd, int flag);
 208
 209 /**
 210  * Run a list of commands separated by ; or even \0
 211  *
 212  * Note that if 'len' is not -1, then the command does not need to be nul
 213  * terminated, Memory will be allocated for the command in that case.
 214  *
 215  * @param cmd   List of commands to run, each separated bu semicolon
 216  * @param len   Length of commands excluding terminator if known (-1 if not)
 217  * @param flag  Execution flags (CMD_FLAG_...)
 218  * @return 0 on success, or != 0 on error.
 219  */
 220 int run_command_list(const char *cmd, int len, int flag);
 221
 222 /* arch/$(ARCH)/lib/board.c */
 223 void board_init_f(ulong);
 224 void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
 225
 226 /**
 227  * board_init_f_mem() - Allocate global data and set stack position
 228  *
 229  * This function is called by each architecture very early in the start-up
 230  * code to set up the environment for board_init_f(). It allocates space for
 231  * global_data (see include/asm-generic/global_data.h) and places the stack
 232  * below this.
 233  *
 234  * This function requires a stack[1] Normally this is at @top. The function
 235  * starts allocating space from 64 bytes below @top. First it creates space
 236  * for global_data. Then it calls arch_setup_gd() which sets gd to point to
 237  * the global_data space and can reserve additional bytes of space if
 238  * required). Finally it allocates early malloc() memory
 239  * (CONFIG_SYS_MALLOC_F_LEN). The new top of the stack is just below this,
 240  * and it returned by this function.
 241  *
 242  * [1] Strictly speaking it would be possible to implement this function
 243  * in C on many archs such that it does not require a stack. However this
 244  * does not seem hugely important as only 64 byte are wasted. The 64 bytes
 245  * are used to handle the calling standard which generally requires pushing
 246  * addresses or registers onto the stack. We should be able to get away with
 247  * less if this becomes important.
 248  *
 249  * @top:        Top of available memory, also normally the top of the stack
 250  * @return:     New stack location
 251  */
 252 ulong board_init_f_mem(ulong top);
 253
 254 /**
 255  * arch_setup_gd() - Set up the global_data pointer
 256  *
 257  * This pointer is special in some architectures and cannot easily be assigned
 258  * to. For example on x86 it is implemented by adding a specific record to its
 259  * Global Descriptor Table! So we we provide a function to carry out this task.
 260  * For most architectures this can simply be:
 261  *
 262  *    gd = gd_ptr;
 263  *
 264  * @gd_ptr:     Pointer to global data
 265  */
 266 void arch_setup_gd(gd_t *gd_ptr);
 267
 268 int checkboard(void);
 269 int show_board_info(void);
 270 int checkflash(void);
 271 int checkdram(void);
 272 int last_stage_init(void);
 273 extern ulong monitor_flash_len;
 274 int mac_read_from_eeprom(void);
 275 extern u8 __dtb_dt_begin[];     /* embedded device tree blob */
 276 int set_cpu_clk_info(void);
 277 int mdm_init(void);
 278 #if defined(CONFIG_DISPLAY_CPUINFO)
 279 int print_cpuinfo(void);
 280 #else
 281 static inline int print_cpuinfo(void)
 282 {
 283         return 0;
 284 }
 285 #endif
 286 int update_flash_size(int flash_size);
 287 int arch_early_init_r(void);
 288
 289 /**
 290  * arch_cpu_init_dm() - init CPU after driver model is available
 291  *
 292  * This is called immediately after driver model is available before
 293  * relocation. This is similar to arch_cpu_init() but is able to reference
 294  * devices
 295  *
 296  * @return 0 if OK, -ve on error
 297  */
 298 int arch_cpu_init_dm(void);
 299
 300 /**
 301  * Reserve all necessary stacks
 302  *
 303  * This is used in generic board init sequence in common/board_f.c. Each
 304  * architecture could provide this function to tailor the required stacks.
 305  *
 306  * On entry gd->start_addr_sp is pointing to the suggested top of the stack.
 307  * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures
 308  * require only this can leave it untouched.
 309  *
 310  * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective
 311  * positions of the stack. The stack pointer(s) will be set to this later.
 312  * gd->irq_sp is only required, if the architecture needs it.
 313  *
 314  * @return 0 if no error
 315  */
 316 __weak int arch_reserve_stacks(void);
 317
 318 /**
 319  * Show the DRAM size in a board-specific way
 320  *
 321  * This is used by boards to display DRAM information in their own way.
 322  *
 323  * @param size  Size of DRAM (which should be displayed along with other info)
 324  */
 325 void board_show_dram(phys_size_t size);
 326
 327 /**
 328  * arch_fixup_fdt() - Write arch-specific information to fdt
 329  *
 330  * Defined in arch/$(ARCH)/lib/bootm-fdt.c
 331  *
 332  * @blob:       FDT blob to write to
 333  * @return 0 if ok, or -ve FDT_ERR_... on failure
 334  */
 335 int arch_fixup_fdt(void *blob);
 336
 337 /* common/flash.c */
 338 void flash_perror (int);
 339
 340 /* common/cmd_source.c */
 341 int     source (ulong addr, const char *fit_uname);
 342
 343 extern ulong load_addr;         /* Default Load Address */
 344 extern ulong save_addr;         /* Default Save Address */
 345 extern ulong save_size;         /* Default Save Size */
 346
 347 /* common/cmd_doc.c */
 348 void    doc_probe(unsigned long physadr);
 349
 350 /* common/cmd_net.c */
 351 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 352
 353 /* common/cmd_fat.c */
 354 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
 355
 356 /* common/cmd_ext2.c */
 357 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
 358
 359 /* common/cmd_nvedit.c */
 360 int     env_init     (void);
 361 void    env_relocate (void);
 362 int     envmatch     (uchar *, int);
 363
 364 /* Avoid unfortunate conflict with libc's getenv() */
 365 #ifdef CONFIG_SANDBOX
 366 #define getenv uboot_getenv
 367 #endif
 368 char    *getenv      (const char *);
 369 int     getenv_f     (const char *name, char *buf, unsigned len);
 370 ulong getenv_ulong(const char *name, int base, ulong default_val);
 371
 372 /**
 373  * getenv_hex() - Return an environment variable as a hex value
 374  *
 375  * Decode an environment as a hex number (it may or may not have a 0x
 376  * prefix). If the environment variable cannot be found, or does not start
 377  * with hex digits, the default value is returned.
 378  *
 379  * @varname:            Variable to decode
 380  * @default_val:        Value to return on error
 381  */
 382 ulong getenv_hex(const char *varname, ulong default_val);
 383
 384 /*
 385  * Read an environment variable as a boolean
 386  * Return -1 if variable does not exist (default to true)
 387  */
 388 int getenv_yesno(const char *var);
 389 int     saveenv      (void);
 390 int     setenv       (const char *, const char *);
 391 int setenv_ulong(const char *varname, ulong value);
 392 int setenv_hex(const char *varname, ulong value);
 393 /**
 394  * setenv_addr - Set an environment variable to an address in hex
 395  *
 396  * @varname:    Environment variable to set
 397  * @addr:       Value to set it to
 398  * @return 0 if ok, 1 on error
 399  */
 400 static inline int setenv_addr(const char *varname, const void *addr)
 401 {
 402         return setenv_hex(varname, (ulong)addr);
 403 }
 404
 405 #ifdef CONFIG_ARM
 406 # include <asm/mach-types.h>
 407 # include <asm/setup.h>
 408 # include <asm/u-boot-arm.h>    /* ARM version to be fixed! */
 409 #endif /* CONFIG_ARM */
 410 #ifdef CONFIG_X86               /* x86 version to be fixed! */
 411 # include <asm/u-boot-x86.h>
 412 #endif /* CONFIG_X86 */
 413 #ifdef CONFIG_SANDBOX
 414 # include <asm/u-boot-sandbox.h>        /* TODO(sjg) what needs to be fixed? */
 415 #endif
 416 #ifdef CONFIG_NDS32
 417 # include <asm/mach-types.h>
 418 # include <asm/setup.h>
 419 # include <asm/u-boot-nds32.h>
 420 #endif /* CONFIG_NDS32 */
 421 #ifdef CONFIG_MIPS
 422 # include <asm/u-boot-mips.h>
 423 #endif /* CONFIG_MIPS */
 424 #ifdef CONFIG_ARC
 425 # include <asm/u-boot-arc.h>
 426 #endif /* CONFIG_ARC */
 427
 428 #ifdef CONFIG_AUTO_COMPLETE
 429 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
 430 #endif
 431 int get_env_id (void);
 432
 433 void    pci_init      (void);
 434 void    pci_init_board(void);
 435 void    pciinfo       (int, int);
 436
 437 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
 438     int    pci_pre_init        (struct pci_controller *);
 439     int    is_pci_host         (struct pci_controller *);
 440 #endif
 441
 442 #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
 443 #   if defined(CONFIG_SYS_PCI_TARGET_INIT)
 444         void    pci_target_init      (struct pci_controller *);
 445 #   endif
 446 #   if defined(CONFIG_SYS_PCI_MASTER_INIT)
 447         void    pci_master_init      (struct pci_controller *);
 448 #   endif
 449 #if defined(CONFIG_440SPE) || \
 450     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
 451     defined(CONFIG_405EX)
 452    void pcie_setup_hoses(int busno);
 453 #endif
 454 #endif
 455
 456 int     misc_init_f   (void);
 457 int     misc_init_r   (void);
 458
 459 /* common/exports.c */
 460 void    jumptable_init(void);
 461
 462 /* common/kallsysm.c */
 463 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
 464
 465 /* api/api.c */
 466 void    api_init (void);
 467
 468 /* common/memsize.c */
 469 long    get_ram_size  (long *, long);
 470 phys_size_t get_effective_memsize(void);
 471
 472 /* $(BOARD)/$(BOARD).c */
 473 void    reset_phy     (void);
 474 void    fdc_hw_init   (void);
 475
 476 /* $(BOARD)/eeprom.c */
 477 void eeprom_init  (void);
 478 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 479 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 480
 481 /*
 482  * Set this up regardless of board
 483  * type, to prevent errors.
 484  */
 485 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
 486 # define CONFIG_SYS_DEF_EEPROM_ADDR 0
 487 #else
 488 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
 489 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
 490 #endif
 491 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
 492
 493 #if defined(CONFIG_SPI)
 494 extern void spi_init_f (void);
 495 extern void spi_init_r (void);
 496 extern ssize_t spi_read  (uchar *, int, uchar *, int);
 497 extern ssize_t spi_write (uchar *, int, uchar *, int);
 498 #endif
 499
 500 /* $(BOARD)/$(BOARD).c */
 501 int board_early_init_f (void);
 502 int board_late_init (void);
 503 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
 504 int board_early_init_r (void);
 505 void board_poweroff (void);
 506
 507 #if defined(CONFIG_SYS_DRAM_TEST)
 508 int testdram(void);
 509 #endif /* CONFIG_SYS_DRAM_TEST */
 510
 511 /* $(CPU)/start.S */
 512 #if defined(CONFIG_5xx) || \
 513     defined(CONFIG_8xx)
 514 uint    get_immr      (uint);
 515 #endif
 516 #if defined(CONFIG_MPC5xxx)
 517 uint    get_svr       (void);
 518 #endif
 519 uint    get_pvr       (void);
 520 uint    get_svr       (void);
 521 uint    rd_ic_cst     (void);
 522 void    wr_ic_cst     (uint);
 523 void    wr_ic_adr     (uint);
 524 uint    rd_dc_cst     (void);
 525 void    wr_dc_cst     (uint);
 526 void    wr_dc_adr     (uint);
 527 int     icache_status (void);
 528 void    icache_enable (void);
 529 void    icache_disable(void);
 530 int     dcache_status (void);
 531 void    dcache_enable (void);
 532 void    dcache_disable(void);
 533 void    mmu_disable(void);
 534 #if defined(CONFIG_ARM)
 535 void    relocate_code(ulong);
 536 #else
 537 void    relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
 538 #endif
 539 ulong   get_endaddr   (void);
 540 void    trap_init     (ulong);
 541 #if defined (CONFIG_4xx)        || \
 542     defined (CONFIG_MPC5xxx)    || \
 543     defined (CONFIG_MPC85xx)    || \
 544     defined (CONFIG_MPC86xx)    || \
 545     defined (CONFIG_MPC83xx)
 546 unsigned char   in8(unsigned int);
 547 void            out8(unsigned int, unsigned char);
 548 unsigned short  in16(unsigned int);
 549 unsigned short  in16r(unsigned int);
 550 void            out16(unsigned int, unsigned short value);
 551 void            out16r(unsigned int, unsigned short value);
 552 unsigned long   in32(unsigned int);
 553 unsigned long   in32r(unsigned int);
 554 void            out32(unsigned int, unsigned long value);
 555 void            out32r(unsigned int, unsigned long value);
 556 void            ppcDcbf(unsigned long value);
 557 void            ppcDcbi(unsigned long value);
 558 void            ppcSync(void);
 559 void            ppcDcbz(unsigned long value);
 560 #endif
 561 #if defined (CONFIG_MICROBLAZE)
 562 unsigned short  in16(unsigned int);
 563 void            out16(unsigned int, unsigned short value);
 564 #endif
 565
 566 #if defined (CONFIG_MPC83xx)
 567 void            ppcDWload(unsigned int *addr, unsigned int *ret);
 568 void            ppcDWstore(unsigned int *addr, unsigned int *value);
 569 void disable_addr_trans(void);
 570 void enable_addr_trans(void);
 571 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 572 void ddr_enable_ecc(unsigned int dram_size);
 573 #endif
 574 #endif
 575
 576 /*
 577  * Return the current value of a monotonically increasing microsecond timer.
 578  * Granularity may be larger than 1us if hardware does not support this.
 579  */
 580 ulong timer_get_us(void);
 581
 582 /* $(CPU)/cpu.c */
 583 static inline int cpumask_next(int cpu, unsigned int mask)
 584 {
 585         for (cpu++; !((1 << cpu) & mask); cpu++)
 586                 ;
 587
 588         return cpu;
 589 }
 590
 591 #define for_each_cpu(iter, cpu, num_cpus, mask) \
 592         for (iter = 0, cpu = cpumask_next(-1, mask); \
 593                 iter < num_cpus; \
 594                 iter++, cpu = cpumask_next(cpu, mask)) \
 595
 596 int     cpu_numcores  (void);
 597 int     cpu_num_dspcores(void);
 598 u32     cpu_mask      (void);
 599 u32     cpu_dsp_mask(void);
 600 int     is_core_valid (unsigned int);
 601 int     probecpu      (void);
 602 int     checkcpu      (void);
 603 int     checkicache   (void);
 604 int     checkdcache   (void);
 605 void    upmconfig     (unsigned int, unsigned int *, unsigned int);
 606 ulong   get_tbclk     (void);
 607 void    reset_misc    (void);
 608 void    reset_cpu     (ulong addr);
 609 #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
 610 void ft_cpu_setup(void *blob, bd_t *bd);
 611 #ifdef CONFIG_PCI
 612 void ft_pci_setup(void *blob, bd_t *bd);
 613 #endif
 614 #endif
 615
 616 void smp_set_core_boot_addr(unsigned long addr, int corenr);
 617 void smp_kick_all_cpus(void);
 618
 619 /* $(CPU)/serial.c */
 620 int     serial_init   (void);
 621 void    serial_setbrg (void);
 622 void    serial_putc   (const char);
 623 void    serial_putc_raw(const char);
 624 void    serial_puts   (const char *);
 625 int     serial_getc   (void);
 626 int     serial_tstc   (void);
 627
 628 /* These versions take a stdio_dev pointer */
 629 struct stdio_dev;
 630 int serial_stub_getc(struct stdio_dev *sdev);
 631 int serial_stub_tstc(struct stdio_dev *sdev);
 632
 633 /* $(CPU)/speed.c */
 634 int     get_clocks (void);
 635 int     get_clocks_866 (void);
 636 int     sdram_adjust_866 (void);
 637 int     adjust_sdram_tbs_8xx (void);
 638 #if defined(CONFIG_MPC8260)
 639 int     prt_8260_clks (void);
 640 #elif defined(CONFIG_MPC5xxx)
 641 int     prt_mpc5xxx_clks (void);
 642 #endif
 643 #ifdef CONFIG_4xx
 644 ulong   get_OPB_freq (void);
 645 ulong   get_PCI_freq (void);
 646 #endif
 647 #if defined(CONFIG_S3C24X0) || \
 648     defined(CONFIG_LH7A40X) || \
 649     defined(CONFIG_EP93XX)
 650 ulong   get_FCLK (void);
 651 ulong   get_HCLK (void);
 652 ulong   get_PCLK (void);
 653 ulong   get_UCLK (void);
 654 #endif
 655 #if defined(CONFIG_LH7A40X)
 656 ulong   get_PLLCLK (void);
 657 #endif
 658 #if defined(CONFIG_IMX)
 659 ulong get_systemPLLCLK(void);
 660 ulong get_FCLK(void);
 661 ulong get_HCLK(void);
 662 ulong get_BCLK(void);
 663 ulong get_PERCLK1(void);
 664 ulong get_PERCLK2(void);
 665 ulong get_PERCLK3(void);
 666 #endif
 667 ulong   get_bus_freq  (ulong);
 668 int get_serial_clock(void);
 669
 670 #if defined(CONFIG_MPC85xx)
 671 typedef MPC85xx_SYS_INFO sys_info_t;
 672 void    get_sys_info  ( sys_info_t * );
 673 #  if defined(CONFIG_OF_LIBFDT)
 674         void ft_fixup_cpu(void *, u64);
 675         void ft_fixup_num_cores(void *);
 676 #  endif
 677 #endif
 678 #if defined(CONFIG_MPC86xx)
 679 typedef MPC86xx_SYS_INFO sys_info_t;
 680 void   get_sys_info  ( sys_info_t * );
 681 static inline ulong get_ddr_freq(ulong dummy)
 682 {
 683         return get_bus_freq(dummy);
 684 }
 685 #else
 686 ulong get_ddr_freq(ulong);
 687 #endif
 688
 689 #if defined(CONFIG_4xx)
 690 #  if defined(CONFIG_440)
 691 #       if defined(CONFIG_440SPE)
 692          unsigned long determine_sysper(void);
 693          unsigned long determine_pci_clock_per(void);
 694 #       endif
 695 #  endif
 696 typedef PPC4xx_SYS_INFO sys_info_t;
 697 int     ppc440spe_revB(void);
 698 void    get_sys_info  ( sys_info_t * );
 699 #endif
 700
 701 /* $(CPU)/cpu_init.c */
 702 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
 703 void    cpu_init_f    (volatile immap_t *immr);
 704 #endif
 705 #if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx)
 706 void    cpu_init_f    (void);
 707 #endif
 708 #ifdef CONFIG_MPC85xx
 709 ulong cpu_init_f(void);
 710 #endif
 711
 712 int     cpu_init_r    (void);
 713 #if defined(CONFIG_MPC8260)
 714 int     prt_8260_rsr  (void);
 715 #elif defined(CONFIG_MPC83xx)
 716 int     prt_83xx_rsr  (void);
 717 #endif
 718
 719 /* $(CPU)/interrupts.c */
 720 int     interrupt_init     (void);
 721 void    timer_interrupt    (struct pt_regs *);
 722 void    external_interrupt (struct pt_regs *);
 723 void    irq_install_handler(int, interrupt_handler_t *, void *);
 724 void    irq_free_handler   (int);
 725 void    reset_timer        (void);
 726 ulong   get_timer          (ulong base);
 727
 728 /* Return value of monotonic microsecond timer */
 729 unsigned long timer_get_us(void);
 730
 731 void    enable_interrupts  (void);
 732 int     disable_interrupts (void);
 733
 734 /* $(CPU)/.../commproc.c */
 735 int     dpram_init (void);
 736 uint    dpram_base(void);
 737 uint    dpram_base_align(uint align);
 738 uint    dpram_alloc(uint size);
 739 uint    dpram_alloc_align(uint size,uint align);
 740 void    bootcount_store (ulong);
 741 ulong   bootcount_load (void);
 742 #define BOOTCOUNT_MAGIC         0xB001C041
 743
 744 /* $(CPU)/.../<eth> */
 745 void mii_init (void);
 746
 747 /* $(CPU)/.../lcd.c */
 748 ulong   lcd_setmem (ulong);
 749
 750 /* $(CPU)/.../video.c */
 751 ulong   video_setmem (ulong);
 752
 753 /* arch/$(ARCH)/lib/cache.c */
 754 void    enable_caches(void);
 755 void    flush_cache   (unsigned long, unsigned long);
 756 void    flush_dcache_all(void);
 757 void    flush_dcache_range(unsigned long start, unsigned long stop);
 758 void    invalidate_dcache_range(unsigned long start, unsigned long stop);
 759 void    invalidate_dcache_all(void);
 760 void    invalidate_icache_all(void);
 761
 762 enum {
 763         /* Disable caches (else flush caches but leave them active) */
 764         CBL_DISABLE_CACHES              = 1 << 0,
 765         CBL_SHOW_BOOTSTAGE_REPORT       = 1 << 1,
 766
 767         CBL_ALL                         = 3,
 768 };
 769
 770 /**
 771  * Clean up ready for linux
 772  *
 773  * @param flags         Flags to control what is done
 774  */
 775 int cleanup_before_linux_select(int flags);
 776
 777 /* arch/$(ARCH)/lib/ticks.S */
 778 uint64_t get_ticks(void);
 779 void    wait_ticks    (unsigned long);
 780
 781 /* arch/$(ARCH)/lib/time.c */
 782 void    __udelay      (unsigned long);
 783 ulong   usec2ticks    (unsigned long usec);
 784 ulong   ticks2usec    (unsigned long ticks);
 785 int     init_timebase (void);
 786
 787 /* lib/gunzip.c */
 788 int gunzip(void *, int, unsigned char *, unsigned long *);
 789 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
 790                                                 int stoponerr, int offset);
 791
 792 /**
 793  * gzwrite progress indicators: defined weak to allow board-specific
 794  * overrides:
 795  *
 796  *      gzwrite_progress_init called on startup
 797  *      gzwrite_progress called during decompress/write loop
 798  *      gzwrite_progress_finish called at end of loop to
 799  *              indicate success (retcode=0) or failure
 800  */
 801 void gzwrite_progress_init(u64 expected_size);
 802
 803 void gzwrite_progress(int iteration,
 804                      u64 bytes_written,
 805                      u64 total_bytes);
 806
 807 void gzwrite_progress_finish(int retcode,
 808                              u64 totalwritten,
 809                              u64 totalsize,
 810                              u32 expected_crc,
 811                              u32 calculated_crc);
 812
 813 /**
 814  * decompress and write gzipped image from memory to block device
 815  *
 816  * @param       src             compressed image address
 817  * @param       len             compressed image length in bytes
 818  * @param       dev             block device descriptor
 819  * @param       szwritebuf      bytes per write (pad to erase size)
 820  * @param       startoffs       offset in bytes of first write
 821  * @param       szexpected      expected uncompressed length
 822  *                              may be zero to use gzip trailer
 823  *                              for files under 4GiB
 824  */
 825 int gzwrite(unsigned char *src, int len,
 826             struct block_dev_desc *dev,
 827             unsigned long szwritebuf,
 828             u64 startoffs,
 829             u64 szexpected);
 830
 831 /* lib/lz4_wrapper.c */
 832 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
 833
 834 /* lib/qsort.c */
 835 void qsort(void *base, size_t nmemb, size_t size,
 836            int(*compar)(const void *, const void *));
 837 int strcmp_compar(const void *, const void *);
 838
 839 /* lib/time.c */
 840 void    udelay        (unsigned long);
 841 void mdelay(unsigned long);
 842
 843 /* lib/uuid.c */
 844 #include <uuid.h>
 845
 846 /* lib/vsprintf.c */
 847 #include <vsprintf.h>
 848
 849 /* lib/strmhz.c */
 850 char *  strmhz(char *buf, unsigned long hz);
 851
 852 /* lib/crc32.c */
 853 #include <u-boot/crc.h>
 854
 855 /* lib/rand.c */
 856 #define RAND_MAX -1U
 857 void srand(unsigned int seed);
 858 unsigned int rand(void);
 859 unsigned int rand_r(unsigned int *seedp);
 860
 861 /*
 862  * STDIO based functions (can always be used)
 863  */
 864 /* serial stuff */
 865 int     serial_printf (const char *fmt, ...)
 866                 __attribute__ ((format (__printf__, 1, 2)));
 867 /* stdin */
 868 int     getc(void);
 869 int     tstc(void);
 870
 871 /* stdout */
 872 #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT)
 873 #define putc(...) do { } while (0)
 874 #define puts(...) do { } while (0)
 875 #define printf(...) do { } while (0)
 876 #define vprintf(...) do { } while (0)
 877 #else
 878 void    putc(const char c);
 879 void    puts(const char *s);
 880 int     printf(const char *fmt, ...)
 881                 __attribute__ ((format (__printf__, 1, 2)));
 882 int     vprintf(const char *fmt, va_list args);
 883 #endif
 884
 885 /* stderr */
 886 #define eputc(c)                fputc(stderr, c)
 887 #define eputs(s)                fputs(stderr, s)
 888 #define eprintf(fmt,args...)    fprintf(stderr,fmt ,##args)
 889
 890 /*
 891  * FILE based functions (can only be used AFTER relocation!)
 892  */
 893 #define stdin           0
 894 #define stdout          1
 895 #define stderr          2
 896 #define MAX_FILES       3
 897
 898 int     fprintf(int file, const char *fmt, ...)
 899                 __attribute__ ((format (__printf__, 2, 3)));
 900 void    fputs(int file, const char *s);
 901 void    fputc(int file, const char c);
 902 int     ftstc(int file);
 903 int     fgetc(int file);
 904
 905 /* lib/gzip.c */
 906 int gzip(void *dst, unsigned long *lenp,
 907                 unsigned char *src, unsigned long srclen);
 908 int zzip(void *dst, unsigned long *lenp, unsigned char *src,
 909                 unsigned long srclen, int stoponerr,
 910                 int (*func)(unsigned long, unsigned long));
 911
 912 /* lib/net_utils.c */
 913 #include <net.h>
 914 static inline struct in_addr getenv_ip(char *var)
 915 {
 916         return string_to_ip(getenv(var));
 917 }
 918
 919 int     pcmcia_init (void);
 920
 921 #ifdef CONFIG_STATUS_LED
 922 # include <status_led.h>
 923 #endif
 924
 925 #include <bootstage.h>
 926
 927 #ifdef CONFIG_SHOW_ACTIVITY
 928 void show_activity(int arg);
 929 #endif
 930
 931 /* Multicore arch functions */
 932 #ifdef CONFIG_MP
 933 int cpu_status(int nr);
 934 int cpu_reset(int nr);
 935 int cpu_disable(int nr);
 936 int cpu_release(int nr, int argc, char * const argv[]);
 937 #endif
 938
 939 #endif /* __ASSEMBLY__ */
 940
 941 #ifdef CONFIG_PPC
 942 /*
 943  * Has to be included outside of the #ifndef __ASSEMBLY__ section.
 944  * Otherwise might lead to compilation errors in assembler files.
 945  */
 946 #include <asm/cache.h>
 947 #endif
 948
 949 /* Put only stuff here that the assembler can digest */
 950
 951 #ifdef CONFIG_POST
 952 #define CONFIG_HAS_POST
 953 #ifndef CONFIG_POST_ALT_LIST
 954 #define CONFIG_POST_STD_LIST
 955 #endif
 956 #endif
 957
 958 #ifdef CONFIG_INIT_CRITICAL
 959 #error CONFIG_INIT_CRITICAL is deprecated!
 960 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
 961 #endif
 962
 963 #define ROUND(a,b)              (((a) + (b) - 1) & ~((b) - 1))
 964
 965 /*
 966  * check_member() - Check the offset of a structure member
 967  *
 968  * @structure:  Name of structure (e.g. global_data)
 969  * @member:     Name of member (e.g. baudrate)
 970  * @offset:     Expected offset in bytes
 971  */
 972 #define check_member(structure, member, offset) _Static_assert( \
 973         offsetof(struct structure, member) == offset, \
 974         "`struct " #structure "` offset for `" #member "` is not " #offset)
 975
 976 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
 977 #ifdef CONFIG_EFI_STUB
 978 #define ll_boot_init()  false
 979 #else
 980 #define ll_boot_init()  true
 981 #endif
 982
 983 /* Pull in stuff for the build system */
 984 #ifdef DO_DEPS_ONLY
 985 # include <environment.h>
 986 #endif
 987
 988 #endif  /* __COMMON_H_ */