include/configs/10m50_devboard.h

   1 /*
   2  * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
   3  * Scott McNutt <smcnutt@psyent.com>
   4  * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /*
  13  * BOARD/CPU
  14  */
  15 #define CONFIG_DISPLAY_CPUINFO
  16 #define CONFIG_DISPLAY_BOARDINFO_LATE
  17
  18 /*
  19  * SERIAL
  20  */
  21 #define CONFIG_BAUDRATE                 115200
  22 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* Suppress console info */
  23 #define CONFIG_SYS_NS16550_MEM32
  24
  25 /*
  26  * Flash
  27  */
  28 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  29 #define CONFIG_SYS_MAX_FLASH_SECT       1024
  30 #define CONFIG_MTD_DEVICE
  31
  32 /*
  33  * NET options
  34  */
  35 #define CONFIG_SYS_RX_ETH_BUFFER        0
  36 #define CONFIG_CMD_MII
  37 #define CONFIG_PHY_GIGE
  38 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  39 #define CONFIG_PHY_MARVELL
  40
  41 /*
  42  * BOOTP options
  43  */
  44 #define CONFIG_BOOTP_BOOTFILESIZE
  45 #define CONFIG_BOOTP_BOOTPATH
  46 #define CONFIG_BOOTP_GATEWAY
  47 #define CONFIG_BOOTP_HOSTNAME
  48
  49 /*
  50  * FDT options
  51  */
  52 #define CONFIG_OF_LIBFDT
  53 #define CONFIG_OF_BOARD_SETUP
  54 #define CONFIG_LMB
  55
  56 /*
  57  * MEMORY ORGANIZATION
  58  * -Monitor at top of sdram.
  59  * -The heap is placed below the monitor
  60  * -The stack is placed below the heap (&grows down).
  61  */
  62 #define CONFIG_SYS_SDRAM_BASE           0xc8000000
  63 #define CONFIG_SYS_SDRAM_SIZE           0x08000000
  64 #define CONFIG_NR_DRAM_BANKS            1
  65 #define CONFIG_MONITOR_IS_IN_RAM
  66 #define CONFIG_SYS_MONITOR_LEN          0x80000 /* Reserve 512k */
  67 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
  68                                          CONFIG_SYS_SDRAM_SIZE - \
  69                                          CONFIG_SYS_MONITOR_LEN)
  70 #define CONFIG_SYS_MALLOC_LEN           0x20000
  71
  72 /*
  73  * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
  74  * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
  75  * reset address, no? This will keep the environment in user region
  76  * of flash. NOTE: the monitor length must be multiple of sector size
  77  * (which is common practice).
  78  */
  79 #define CONFIG_ENV_IS_IN_FLASH
  80
  81 #define CONFIG_ENV_SIZE                 0x10000 /* 64k, 1 sector */
  82 #define CONFIG_ENV_OVERWRITE            /* Serial change Ok     */
  83 #define CONFIG_ENV_ADDR                 (0xf4000000 + CONFIG_SYS_MONITOR_LEN)
  84
  85 /*
  86  * MISC
  87  */
  88 #define CONFIG_SYS_LONGHELP             /* Provide extended help */
  89 #define CONFIG_SYS_CBSIZE               256     /* Console I/O buf size */
  90 #define CONFIG_SYS_MAXARGS              16      /* Max command args     */
  91 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Bootarg buf size */
  92 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
  93                                         sizeof(CONFIG_SYS_PROMPT) + \
  94                                          16)    /* Print buf size */
  95 #define CONFIG_SYS_LOAD_ADDR            0xcc000000      /* Half of RAM */
  96 #define CONFIG_LOADADDR                 CONFIG_SYS_LOAD_ADDR
  97 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  98 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MONITOR_BASE - \
  99                                          CONFIG_ENV_SIZE - \
 100                                          CONFIG_SYS_MALLOC_LEN -        \
 101                                          0x10000)
 102 #define CONFIG_VERSION_VARIABLE
 103 #define CONFIG_AUTO_COMPLETE
 104 #define CONFIG_CMDLINE_EDITING
 105
 106 #endif /* __CONFIG_H */