include/configs/A3000.h

   1 /*
   2  * (C) Copyright 2001, 2002, 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /* ------------------------------------------------------------------------- */
  25 /*
  26  * Configuration settings for the A-3000 board (Artis Microsystems Inc.).
  27  * http://artismicro.com
  28  */
  29
  30 /* ------------------------------------------------------------------------- */
  31
  32 /*
  33  * board/config.h - configuration options, board specific
  34  */
  35
  36 #ifndef __CONFIG_H
  37 #define __CONFIG_H
  38
  39 /*
  40  * High Level Configuration Options
  41  * (easy to change)
  42  */
  43
  44 #define CONFIG_MPC824X          1
  45 #define CONFIG_MPC8245          1
  46 #define CONFIG_A3000            1
  47
  48
  49 #define CONFIG_CONS_INDEX       1
  50 #define CONFIG_BAUDRATE         9600
  51 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  52
  53 #define CONFIG_BOOTDELAY        5
  54
  55
  56 /*
  57  * BOOTP options
  58  */
  59 #define CONFIG_BOOTP_BOOTFILESIZE
  60 #define CONFIG_BOOTP_BOOTPATH
  61 #define CONFIG_BOOTP_GATEWAY
  62 #define CONFIG_BOOTP_HOSTNAME
  63
  64
  65 /*
  66  * Command line configuration.
  67  */
  68 #include <config_cmd_default.h>
  69
  70
  71 /*
  72  * Miscellaneous configurable options
  73  */
  74 #undef CONFIG_SYS_LONGHELP                      /* undef to save memory         */
  75 #define CONFIG_SYS_PROMPT       "A3000> "               /* Monitor Command Prompt       */
  76 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
  77
  78 /* Print Buffer Size
  79  */
  80 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  81 #define CONFIG_SYS_MAXARGS      8               /* Max number of command args   */
  82 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
  83 #define CONFIG_SYS_LOAD_ADDR    0x00400000      /* Default load address         */
  84
  85 /*-----------------------------------------------------------------------
  86  * PCI stuff
  87  *-----------------------------------------------------------------------
  88  */
  89 #define CONFIG_HARD_I2C         1               /* To enable I2C support        */
  90 #undef  CONFIG_SOFT_I2C                         /* I2C bit-banged               */
  91 #define CONFIG_SYS_I2C_SPEED            400000          /* I2C speed and slave address  */
  92 #define CONFIG_SYS_I2C_SLAVE            0x7F
  93
  94 /*-----------------------------------------------------------------------
  95  * PCI stuff
  96  *-----------------------------------------------------------------------
  97  */
  98 #define CONFIG_PCI                      /* include pci support          */
  99 #undef  CONFIG_PCI_PNP
 100 #define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
 101
 102 #define CONFIG_NET_MULTI                /* Multi ethernet cards support */
 103
 104 /* #define CONFIG_TULIP */
 105 /* #define CONFIG_EEPRO100 */
 106 #define CONFIG_NATSEMI
 107
 108 #define PCI_ENET0_IOADDR                0x80000000
 109 #define PCI_ENET0_MEMADDR               0x80000000
 110 #define PCI_ENET1_IOADDR                0x81000000
 111 #define PCI_ENET1_MEMADDR               0x81000000
 112 #define PCI_ENET2_IOADDR                0x82000000
 113 #define PCI_ENET2_MEMADDR               0x82000000
 114 #define PCI_ENET3_IOADDR                0x83000000
 115 #define PCI_ENET3_MEMADDR               0x83000000
 116
 117
 118 /*-----------------------------------------------------------------------
 119  * Start addresses for the final memory configuration
 120  * (Set up by the startup code)
 121  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 122  */
 123 #define CONFIG_SYS_SDRAM_BASE                   0x00000000
 124
 125 #define CONFIG_SYS_FLASH_BASE0_PRELIM           0xFF000000      /* FLASH bank on RCS#0 */
 126 #define CONFIG_SYS_FLASH_BASE1_PRELIM           0xFF000000      /* FLASH bank on RCS#1 */
 127 #define CONFIG_SYS_FLASH_BASE                   CONFIG_SYS_FLASH_BASE0_PRELIM
 128 #define CONFIG_SYS_FLASH_BANKS                  { CONFIG_SYS_FLASH_BASE0_PRELIM }
 129
 130 /* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
 131  * reset vector is actually located at FFB00100, but the 8245
 132  * takes care of us.
 133  */
 134 #define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 135
 136 #define CONFIG_SYS_EUMB_ADDR        0xFC000000
 137
 138 #define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 139 #define CONFIG_SYS_MONITOR_LEN      (256 << 10) /* Reserve 256 kB for Monitor   */
 140 #define CONFIG_SYS_MALLOC_LEN       (128 << 10) /* Reserve 128 kB for malloc()  */
 141
 142 #define CONFIG_SYS_MEMTEST_START   0x00004000   /* memtest works on             */
 143 #define CONFIG_SYS_MEMTEST_END      0x02000000  /* 0 ... 32 MB in DRAM          */
 144
 145         /* Maximum amount of RAM.
 146          */
 147 #define CONFIG_SYS_MAX_RAM_SIZE    0x04000000   /* 0 .. 128 MB of (S)DRAM */
 148
 149
 150 #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 151 #undef CONFIG_SYS_RAMBOOT
 152 #else
 153 #define CONFIG_SYS_RAMBOOT
 154 #endif
 155
 156 /*
 157  * NS16550 Configuration
 158  */
 159 #define CONFIG_SYS_NS16550
 160 #define CONFIG_SYS_NS16550_SERIAL
 161
 162 #define CONFIG_SYS_NS16550_REG_SIZE     1
 163
 164 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 165
 166 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500)
 167 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600)
 168
 169 /*-----------------------------------------------------------------------
 170  * Definitions for initial stack pointer and data area
 171  */
 172
 173 /* #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE */
 174 /*#define CONFIG_SYS_GBL_DATA_SIZE    256*/
 175 #define CONFIG_SYS_GBL_DATA_SIZE      128
 176 #define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
 177 #define CONFIG_SYS_INIT_RAM_END      0x1000
 178 #define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 179
 180
 181 /*
 182  * Low Level Configuration Settings
 183  * (address mappings, register initial values, etc.)
 184  * You should know what you are doing if you make changes here.
 185  * For the detail description refer to the MPC8240 user's manual.
 186  */
 187
 188 #define CONFIG_SYS_CLK_FREQ  33333333   /* external frequency to pll */
 189 #define CONFIG_SYS_HZ                1000
 190
 191         /* Bit-field values for MCCR1.
 192          */
 193 #define CONFIG_SYS_ROMNAL           7
 194 #define CONFIG_SYS_ROMFAL           11
 195 #define CONFIG_SYS_DBUS_SIZE        0x3
 196
 197         /* Bit-field values for MCCR2.
 198          */
 199 #define CONFIG_SYS_TSWAIT           0x5             /* Transaction Start Wait States timer */
 200 #define CONFIG_SYS_REFINT           0x400           /* Refresh interval FIXME: was 0t430                */
 201
 202         /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
 203          */
 204 #define CONFIG_SYS_BSTOPRE          121
 205
 206         /* Bit-field values for MCCR3.
 207          */
 208 #define CONFIG_SYS_REFREC           8       /* Refresh to activate interval */
 209
 210         /* Bit-field values for MCCR4.
 211          */
 212 #define CONFIG_SYS_PRETOACT         3       /* Precharge to activate interval FIXME: was 2      */
 213 #define CONFIG_SYS_ACTTOPRE         5       /* Activate to Precharge interval FIXME: was 5      */
 214 #define CONFIG_SYS_ACTORW           3           /* FIXME was 2 */
 215 #define CONFIG_SYS_SDMODE_CAS_LAT  3        /* SDMODE CAS latancy */
 216 #define CONFIG_SYS_SDMODE_WRAP      0       /* SDMODE wrap type */
 217 #define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
 218 #define CONFIG_SYS_EXTROM           1
 219 #define CONFIG_SYS_REGDIMM          0
 220
 221 #define CONFIG_SYS_PGMAX            0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
 222
 223 #define CONFIG_SYS_SDRAM_DSCD   0x20    /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
 224
 225 /* Memory bank settings.
 226  * Only bits 20-29 are actually used from these vales to set the
 227  * start/end addresses. The upper two bits will always be 0, and the lower
 228  * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
 229  * address. Refer to the MPC8240 book.
 230  */
 231
 232 #define CONFIG_SYS_BANK0_START      0x00000000
 233 #define CONFIG_SYS_BANK0_END        (CONFIG_SYS_MAX_RAM_SIZE - 1)
 234 #define CONFIG_SYS_BANK0_ENABLE    1
 235 #define CONFIG_SYS_BANK1_START      0x3ff00000
 236 #define CONFIG_SYS_BANK1_END        0x3fffffff
 237 #define CONFIG_SYS_BANK1_ENABLE    0
 238 #define CONFIG_SYS_BANK2_START      0x3ff00000
 239 #define CONFIG_SYS_BANK2_END        0x3fffffff
 240 #define CONFIG_SYS_BANK2_ENABLE    0
 241 #define CONFIG_SYS_BANK3_START      0x3ff00000
 242 #define CONFIG_SYS_BANK3_END        0x3fffffff
 243 #define CONFIG_SYS_BANK3_ENABLE    0
 244 #define CONFIG_SYS_BANK4_START      0x3ff00000
 245 #define CONFIG_SYS_BANK4_END        0x3fffffff
 246 #define CONFIG_SYS_BANK4_ENABLE    0
 247 #define CONFIG_SYS_BANK5_START      0x3ff00000
 248 #define CONFIG_SYS_BANK5_END        0x3fffffff
 249 #define CONFIG_SYS_BANK5_ENABLE    0
 250 #define CONFIG_SYS_BANK6_START      0x3ff00000
 251 #define CONFIG_SYS_BANK6_END        0x3fffffff
 252 #define CONFIG_SYS_BANK6_ENABLE    0
 253 #define CONFIG_SYS_BANK7_START      0x3ff00000
 254 #define CONFIG_SYS_BANK7_END        0x3fffffff
 255 #define CONFIG_SYS_BANK7_ENABLE    0
 256
 257 #define CONFIG_SYS_ODCR     0xff
 258
 259 #define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 260 #define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 261
 262 #define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
 263 #define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 264
 265 #define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
 266 #define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 267
 268 #define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
 269 #define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 270
 271 #define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
 272 #define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
 273 #define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
 274 #define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
 275 #define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
 276 #define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
 277 #define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
 278 #define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 279
 280 /*
 281  * For booting Linux, the board info and command line data
 282  * have to be in the first 8 MB of memory, since this is
 283  * the maximum mapped by the Linux kernel during initialization.
 284  */
 285 #define CONFIG_SYS_BOOTMAPSZ        (8 << 20)   /* Initial Memory map for Linux */
 286
 287 /*-----------------------------------------------------------------------
 288  * FLASH organization
 289  */
 290 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* Max number of flash banks            */
 291 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* Max number of sectors per flash      */
 292
 293 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms) */
 294 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms) */
 295
 296
 297         /* Warining: environment is not EMBEDDED in the U-Boot code.
 298          * It's stored in flash separately.
 299          */
 300 #define CONFIG_ENV_IS_IN_FLASH      1
 301 #define CONFIG_ENV_ADDR         0xFFFE0000
 302 #define CONFIG_ENV_SIZE         0x00020000 /* Size of the Environment           */
 303 #define CONFIG_ENV_SECT_SIZE    0x00020000 /* Size of the Environment Sector    */
 304
 305 /*-----------------------------------------------------------------------
 306  * Cache Configuration
 307  */
 308 #define CONFIG_SYS_CACHELINE_SIZE       32
 309 #if defined(CONFIG_CMD_KGDB)
 310 #  define CONFIG_SYS_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 311 #endif
 312
 313 /*
 314  * Internal Definitions
 315  *
 316  * Boot Flags
 317  */
 318 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH     */
 319 #define BOOTFLAG_WARM           0x02    /* Software reboot                      */
 320
 321 #endif  /* __CONFIG_H */