include/configs/B4860QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * B4860 QDS board configuration file
  12  */
  13 #ifdef CONFIG_RAMBOOT_PBL
  14 #define CONFIG_SYS_FSL_PBL_PBI  $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
  15 #define CONFIG_SYS_FSL_PBL_RCW  $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
  16 #ifndef CONFIG_NAND
  17 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  18 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  19 #else
  20 #define CONFIG_SPL_FLUSH_IMAGE
  21 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  22 #define CONFIG_SYS_TEXT_BASE            0x00201000
  23 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  24 #define CONFIG_SPL_PAD_TO               0x40000
  25 #define CONFIG_SPL_MAX_SIZE             0x28000
  26 #define RESET_VECTOR_OFFSET             0x27FFC
  27 #define BOOT_PAGE_OFFSET                0x27000
  28 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  29 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  30 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  31 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  32 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  33 #define CONFIG_SPL_NAND_BOOT
  34 #ifdef CONFIG_SPL_BUILD
  35 #define CONFIG_SPL_SKIP_RELOCATE
  36 #define CONFIG_SPL_COMMON_INIT_DDR
  37 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  38 #define CONFIG_SYS_NO_FLASH
  39 #endif
  40 #endif
  41 #endif
  42
  43 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  44 /* Set 1M boot space */
  45 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  46 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  47                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  48 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  49 #define CONFIG_SYS_NO_FLASH
  50 #endif
  51
  52 /* High Level Configuration Options */
  53 #define CONFIG_BOOKE
  54 #define CONFIG_E500                     /* BOOKE e500 family */
  55 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  56 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  57 #define CONFIG_MP                       /* support multiple processors */
  58
  59 #ifndef CONFIG_SYS_TEXT_BASE
  60 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  61 #endif
  62
  63 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  64 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  65 #endif
  66
  67 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  68 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  69 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  70 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  71 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  72 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  73 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  74
  75 #ifndef CONFIG_ARCH_B4420
  76 #define CONFIG_SYS_SRIO
  77 #define CONFIG_SRIO1                    /* SRIO port 1 */
  78 #define CONFIG_SRIO2                    /* SRIO port 2 */
  79 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  80 #endif
  81
  82 /* I2C bus multiplexer */
  83 #define I2C_MUX_PCA_ADDR                0x77
  84
  85 /* VSC Crossbar switches */
  86 #define CONFIG_VSC_CROSSBAR
  87 #define I2C_CH_DEFAULT                  0x8
  88 #define I2C_CH_VSC3316                  0xc
  89 #define I2C_CH_VSC3308                  0xd
  90
  91 #define VSC3316_TX_ADDRESS              0x70
  92 #define VSC3316_RX_ADDRESS              0x71
  93 #define VSC3308_TX_ADDRESS              0x02
  94 #define VSC3308_RX_ADDRESS              0x03
  95
  96 /* IDT clock synthesizers */
  97 #define CONFIG_IDT8T49N222A
  98 #define I2C_CH_IDT                     0x9
  99
 100 #define IDT_SERDES1_ADDRESS            0x6E
 101 #define IDT_SERDES2_ADDRESS            0x6C
 102
 103 /* Voltage monitor on channel 2*/
 104 #define I2C_MUX_CH_VOL_MONITOR          0xa
 105 #define I2C_VOL_MONITOR_ADDR            0x40
 106 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 107 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 108 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 109
 110 #define CONFIG_ZM7300
 111 #define I2C_MUX_CH_DPM                  0xa
 112 #define I2C_DPM_ADDR                    0x28
 113
 114 #define CONFIG_ENV_OVERWRITE
 115
 116 #ifdef CONFIG_SYS_NO_FLASH
 117 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
 118 #define CONFIG_ENV_IS_NOWHERE
 119 #endif
 120 #else
 121 #define CONFIG_FLASH_CFI_DRIVER
 122 #define CONFIG_SYS_FLASH_CFI
 123 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 124 #endif
 125
 126 #if defined(CONFIG_SPIFLASH)
 127 #define CONFIG_SYS_EXTRA_ENV_RELOC
 128 #define CONFIG_ENV_IS_IN_SPI_FLASH
 129 #define CONFIG_ENV_SPI_BUS              0
 130 #define CONFIG_ENV_SPI_CS               0
 131 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 132 #define CONFIG_ENV_SPI_MODE             0
 133 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 134 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 135 #define CONFIG_ENV_SECT_SIZE            0x10000
 136 #elif defined(CONFIG_SDCARD)
 137 #define CONFIG_SYS_EXTRA_ENV_RELOC
 138 #define CONFIG_ENV_IS_IN_MMC
 139 #define CONFIG_SYS_MMC_ENV_DEV          0
 140 #define CONFIG_ENV_SIZE                 0x2000
 141 #define CONFIG_ENV_OFFSET               (512 * 1097)
 142 #elif defined(CONFIG_NAND)
 143 #define CONFIG_SYS_EXTRA_ENV_RELOC
 144 #define CONFIG_ENV_IS_IN_NAND
 145 #define CONFIG_ENV_SIZE                 0x2000
 146 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 147 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 148 #define CONFIG_ENV_IS_IN_REMOTE
 149 #define CONFIG_ENV_ADDR         0xffe20000
 150 #define CONFIG_ENV_SIZE         0x2000
 151 #elif defined(CONFIG_ENV_IS_NOWHERE)
 152 #define CONFIG_ENV_SIZE         0x2000
 153 #else
 154 #define CONFIG_ENV_IS_IN_FLASH
 155 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 156 #define CONFIG_ENV_SIZE         0x2000
 157 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 158 #endif
 159
 160 #ifndef __ASSEMBLY__
 161 unsigned long get_board_sys_clk(void);
 162 unsigned long get_board_ddr_clk(void);
 163 #endif
 164 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 165 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 166
 167 /*
 168  * These can be toggled for performance analysis, otherwise use default.
 169  */
 170 #define CONFIG_SYS_CACHE_STASHING
 171 #define CONFIG_BTB                      /* toggle branch predition */
 172 #define CONFIG_DDR_ECC
 173 #ifdef CONFIG_DDR_ECC
 174 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 175 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 176 #endif
 177
 178 #define CONFIG_ENABLE_36BIT_PHYS
 179
 180 #ifdef CONFIG_PHYS_64BIT
 181 #define CONFIG_ADDR_MAP
 182 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 183 #endif
 184
 185 #if 0
 186 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 187 #endif
 188 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 189 #define CONFIG_SYS_MEMTEST_END          0x00400000
 190 #define CONFIG_SYS_ALT_MEMTEST
 191 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 192
 193 /*
 194  *  Config the L3 Cache as L3 SRAM
 195  */
 196 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 197 #define CONFIG_SYS_L3_SIZE              256 << 10
 198 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 199 #ifdef CONFIG_NAND
 200 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 201 #endif
 202 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 203 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 204 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 205 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 206
 207 #ifdef CONFIG_PHYS_64BIT
 208 #define CONFIG_SYS_DCSRBAR              0xf0000000
 209 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 210 #endif
 211
 212 /* EEPROM */
 213 #define CONFIG_ID_EEPROM
 214 #define CONFIG_SYS_I2C_EEPROM_NXID
 215 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 216 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 217 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 218 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 219 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 220
 221 /*
 222  * DDR Setup
 223  */
 224 #define CONFIG_VERY_BIG_RAM
 225 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 226 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 227
 228 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 229 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 230 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 231
 232 #define CONFIG_DDR_SPD
 233 #define CONFIG_SYS_DDR_RAW_TIMING
 234 #define CONFIG_SYS_FSL_DDR3
 235 #ifndef CONFIG_SPL_BUILD
 236 #define CONFIG_FSL_DDR_INTERACTIVE
 237 #endif
 238
 239 #define CONFIG_SYS_SPD_BUS_NUM  0
 240 #define SPD_EEPROM_ADDRESS1     0x51
 241 #define SPD_EEPROM_ADDRESS2     0x53
 242
 243 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 244 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 245
 246 /*
 247  * IFC Definitions
 248  */
 249 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 250 #ifdef CONFIG_PHYS_64BIT
 251 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 252 #else
 253 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 254 #endif
 255
 256 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 257 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 258                                 + 0x8000000) | \
 259                                 CSPR_PORT_SIZE_16 | \
 260                                 CSPR_MSEL_NOR | \
 261                                 CSPR_V)
 262 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 263 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 264                                 CSPR_PORT_SIZE_16 | \
 265                                 CSPR_MSEL_NOR | \
 266                                 CSPR_V)
 267 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 268 /* NOR Flash Timing Params */
 269 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 270 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 271                                 FTIM0_NOR_TEADC(0x04) | \
 272                                 FTIM0_NOR_TEAHC(0x20))
 273 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 274                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 275                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 276 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 277                                 FTIM2_NOR_TCH(0x0E) | \
 278                                 FTIM2_NOR_TWPH(0x0E) | \
 279                                 FTIM2_NOR_TWP(0x1c))
 280 #define CONFIG_SYS_NOR_FTIM3    0x0
 281
 282 #define CONFIG_SYS_FLASH_QUIET_TEST
 283 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 284
 285 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 286 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 287 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 288 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 289
 290 #define CONFIG_SYS_FLASH_EMPTY_INFO
 291 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 292                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 293
 294 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 295 #define CONFIG_FSL_QIXIS_V2
 296 #define QIXIS_BASE              0xffdf0000
 297 #ifdef CONFIG_PHYS_64BIT
 298 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 299 #else
 300 #define QIXIS_BASE_PHYS         QIXIS_BASE
 301 #endif
 302 #define QIXIS_LBMAP_SWITCH              0x01
 303 #define QIXIS_LBMAP_MASK                0x0f
 304 #define QIXIS_LBMAP_SHIFT               0
 305 #define QIXIS_LBMAP_DFLTBANK            0x00
 306 #define QIXIS_LBMAP_ALTBANK             0x02
 307 #define QIXIS_RST_CTL_RESET             0x31
 308 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 309 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 310 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 311
 312 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 313 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 314                                 | CSPR_PORT_SIZE_8 \
 315                                 | CSPR_MSEL_GPCM \
 316                                 | CSPR_V)
 317 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 318 #define CONFIG_SYS_CSOR3        0x0
 319 /* QIXIS Timing parameters for IFC CS3 */
 320 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 321                                         FTIM0_GPCM_TEADC(0x0e) | \
 322                                         FTIM0_GPCM_TEAHC(0x0e))
 323 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 324                                         FTIM1_GPCM_TRAD(0x1f))
 325 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 326                                         FTIM2_GPCM_TCH(0x8) | \
 327                                         FTIM2_GPCM_TWP(0x1f))
 328 #define CONFIG_SYS_CS3_FTIM3            0x0
 329
 330 /* NAND Flash on IFC */
 331 #define CONFIG_NAND_FSL_IFC
 332 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 333 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 334 #define CONFIG_SYS_NAND_BASE            0xff800000
 335 #ifdef CONFIG_PHYS_64BIT
 336 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 337 #else
 338 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 339 #endif
 340
 341 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 342 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 343                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 344                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 345                                 | CSPR_V)
 346 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 347
 348 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 349                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 350                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 351                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 352                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 353                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 354                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 355
 356 #define CONFIG_SYS_NAND_ONFI_DETECTION
 357
 358 /* ONFI NAND Flash mode0 Timing Params */
 359 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 360                                         FTIM0_NAND_TWP(0x18)   | \
 361                                         FTIM0_NAND_TWCHT(0x07) | \
 362                                         FTIM0_NAND_TWH(0x0a))
 363 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 364                                         FTIM1_NAND_TWBE(0x39)  | \
 365                                         FTIM1_NAND_TRR(0x0e)   | \
 366                                         FTIM1_NAND_TRP(0x18))
 367 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 368                                         FTIM2_NAND_TREH(0x0a) | \
 369                                         FTIM2_NAND_TWHRE(0x1e))
 370 #define CONFIG_SYS_NAND_FTIM3           0x0
 371
 372 #define CONFIG_SYS_NAND_DDR_LAW         11
 373
 374 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 375 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 376 #define CONFIG_CMD_NAND
 377
 378 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 379
 380 #if defined(CONFIG_NAND)
 381 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 382 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 383 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 384 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 385 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 386 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 387 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 388 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 389 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 390 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 391 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 392 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 393 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 394 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 395 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 396 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 397 #else
 398 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 399 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 400 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 401 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 402 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 403 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 404 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 405 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 406 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 407 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 408 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 409 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 410 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 411 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 412 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 413 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 414 #endif
 415 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 416 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 417 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 418 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 419 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 420 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 421 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 422 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 423
 424 #ifdef CONFIG_SPL_BUILD
 425 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 426 #else
 427 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 428 #endif
 429
 430 #if defined(CONFIG_RAMBOOT_PBL)
 431 #define CONFIG_SYS_RAMBOOT
 432 #endif
 433
 434 #define CONFIG_BOARD_EARLY_INIT_R
 435 #define CONFIG_MISC_INIT_R
 436
 437 #define CONFIG_HWCONFIG
 438
 439 /* define to use L1 as initial stack */
 440 #define CONFIG_L1_INIT_RAM
 441 #define CONFIG_SYS_INIT_RAM_LOCK
 442 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 443 #ifdef CONFIG_PHYS_64BIT
 444 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 445 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 446 /* The assembler doesn't like typecast */
 447 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 448         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 449           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 450 #else
 451 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 452 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 453 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 454 #endif
 455 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 456
 457 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 458                                         GENERATED_GBL_DATA_SIZE)
 459 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 460
 461 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 462 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 463
 464 /* Serial Port - controlled on board with jumper J8
 465  * open - index 2
 466  * shorted - index 1
 467  */
 468 #define CONFIG_CONS_INDEX       1
 469 #define CONFIG_SYS_NS16550_SERIAL
 470 #define CONFIG_SYS_NS16550_REG_SIZE     1
 471 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 472
 473 #define CONFIG_SYS_BAUDRATE_TABLE       \
 474         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 475
 476 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 477 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 478 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 479 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 480
 481 /* I2C */
 482 #define CONFIG_SYS_I2C
 483 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 484 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 485 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 486 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 487 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 488 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 489 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 490
 491 /*
 492  * RTC configuration
 493  */
 494 #define RTC
 495 #define CONFIG_RTC_DS3231               1
 496 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 497
 498 /*
 499  * RapidIO
 500  */
 501 #ifdef CONFIG_SYS_SRIO
 502 #ifdef CONFIG_SRIO1
 503 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 504 #ifdef CONFIG_PHYS_64BIT
 505 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 506 #else
 507 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 508 #endif
 509 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 510 #endif
 511
 512 #ifdef CONFIG_SRIO2
 513 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 514 #ifdef CONFIG_PHYS_64BIT
 515 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 516 #else
 517 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 518 #endif
 519 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 520 #endif
 521 #endif
 522
 523 /*
 524  * for slave u-boot IMAGE instored in master memory space,
 525  * PHYS must be aligned based on the SIZE
 526  */
 527 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 528 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 529 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 530 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 531 /*
 532  * for slave UCODE and ENV instored in master memory space,
 533  * PHYS must be aligned based on the SIZE
 534  */
 535 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 536 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 537 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 538
 539 /* slave core release by master*/
 540 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 541 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 542
 543 /*
 544  * SRIO_PCIE_BOOT - SLAVE
 545  */
 546 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 547 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 548 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 549                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 550 #endif
 551
 552 /*
 553  * eSPI - Enhanced SPI
 554  */
 555 #define CONFIG_SF_DEFAULT_SPEED         10000000
 556 #define CONFIG_SF_DEFAULT_MODE          0
 557
 558 /*
 559  * MAPLE
 560  */
 561 #ifdef CONFIG_PHYS_64BIT
 562 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 563 #else
 564 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 565 #endif
 566
 567 /*
 568  * General PCI
 569  * Memory space is mapped 1-1, but I/O space must start from 0.
 570  */
 571
 572 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 573 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 574 #ifdef CONFIG_PHYS_64BIT
 575 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 576 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 577 #else
 578 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 579 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 580 #endif
 581 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 582 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 583 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 584 #ifdef CONFIG_PHYS_64BIT
 585 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 586 #else
 587 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 588 #endif
 589 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 590
 591 /* Qman/Bman */
 592 #ifndef CONFIG_NOBQFMAN
 593 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 594 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 595 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 596 #ifdef CONFIG_PHYS_64BIT
 597 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 598 #else
 599 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 600 #endif
 601 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 602 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 603 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 604 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 605 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 606 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 607                                         CONFIG_SYS_BMAN_CENA_SIZE)
 608 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 609 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 610 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 611 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 612 #ifdef CONFIG_PHYS_64BIT
 613 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 614 #else
 615 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 616 #endif
 617 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 618 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 619 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 620 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 621 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 622 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 623                                         CONFIG_SYS_QMAN_CENA_SIZE)
 624 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 625 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 626
 627 #define CONFIG_SYS_DPAA_FMAN
 628
 629 #define CONFIG_SYS_DPAA_RMAN
 630
 631 /* Default address of microcode for the Linux Fman driver */
 632 #if defined(CONFIG_SPIFLASH)
 633 /*
 634  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 635  * env, so we got 0x110000.
 636  */
 637 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 638 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 639 #elif defined(CONFIG_SDCARD)
 640 /*
 641  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 642  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 643  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 644  */
 645 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 646 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
 647 #elif defined(CONFIG_NAND)
 648 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 649 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
 650 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 651 /*
 652  * Slave has no ucode locally, it can fetch this from remote. When implementing
 653  * in two corenet boards, slave's ucode could be stored in master's memory
 654  * space, the address can be mapped from slave TLB->slave LAW->
 655  * slave SRIO or PCIE outbound window->master inbound window->
 656  * master LAW->the ucode address in master's memory space.
 657  */
 658 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 659 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 660 #else
 661 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 662 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 663 #endif
 664 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 665 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 666 #endif /* CONFIG_NOBQFMAN */
 667
 668 #ifdef CONFIG_SYS_DPAA_FMAN
 669 #define CONFIG_FMAN_ENET
 670 #define CONFIG_PHYLIB_10G
 671 #define CONFIG_PHY_VITESSE
 672 #define CONFIG_PHY_TERANETICS
 673 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 674 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 675 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 676 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 677 #endif
 678
 679 #ifdef CONFIG_PCI
 680 #define CONFIG_PCI_INDIRECT_BRIDGE
 681
 682 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 683 #define CONFIG_DOS_PARTITION
 684 #endif  /* CONFIG_PCI */
 685
 686 #ifdef CONFIG_FMAN_ENET
 687 #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
 688 #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
 689
 690 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 691 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 692 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 693
 694 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 695 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 696 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 697 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 698
 699 #define CONFIG_MII              /* MII PHY management */
 700 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 701 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 702 #endif
 703
 704 #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
 705
 706 /*
 707  * Environment
 708  */
 709 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 710 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 711
 712 /*
 713  * Command line configuration.
 714  */
 715 #define CONFIG_CMD_DATE
 716 #define CONFIG_CMD_EEPROM
 717 #define CONFIG_CMD_ERRATA
 718 #define CONFIG_CMD_IRQ
 719 #define CONFIG_CMD_REGINFO
 720
 721 #ifdef CONFIG_PCI
 722 #define CONFIG_CMD_PCI
 723 #endif
 724
 725 /* Hash command with SHA acceleration supported in hardware */
 726 #ifdef CONFIG_FSL_CAAM
 727 #define CONFIG_CMD_HASH
 728 #define CONFIG_SHA_HW_ACCEL
 729 #endif
 730
 731 /*
 732 * USB
 733 */
 734 #define CONFIG_HAS_FSL_DR_USB
 735
 736 #ifdef CONFIG_HAS_FSL_DR_USB
 737 #define CONFIG_USB_EHCI
 738
 739 #ifdef CONFIG_USB_EHCI
 740 #define CONFIG_USB_EHCI_FSL
 741 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 742 #endif
 743 #endif
 744
 745 /*
 746  * Miscellaneous configurable options
 747  */
 748 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 749 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 750 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 751 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 752 #ifdef CONFIG_CMD_KGDB
 753 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 754 #else
 755 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 756 #endif
 757 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 758 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 759 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 760
 761 /*
 762  * For booting Linux, the board info and command line data
 763  * have to be in the first 64 MB of memory, since this is
 764  * the maximum mapped by the Linux kernel during initialization.
 765  */
 766 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 767 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 768
 769 #ifdef CONFIG_CMD_KGDB
 770 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 771 #endif
 772
 773 /*
 774  * Environment Configuration
 775  */
 776 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 777 #define CONFIG_BOOTFILE         "uImage"
 778 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 779
 780 /* default location for tftp and bootm */
 781 #define CONFIG_LOADADDR         1000000
 782
 783
 784 #define CONFIG_BAUDRATE 115200
 785
 786 #define __USB_PHY_TYPE  ulpi
 787
 788 #ifdef CONFIG_ARCH_B4860
 789 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
 790                         "bank_intlv=cs0_cs1;"   \
 791                         "en_cpc:cpc2;"
 792 #else
 793 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
 794 #endif
 795
 796 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 797         HWCONFIG                                                \
 798         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 799         "netdev=eth0\0"                                         \
 800         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 801         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 802         "tftpflash=tftpboot $loadaddr $uboot && "               \
 803         "protect off $ubootaddr +$filesize && "                 \
 804         "erase $ubootaddr +$filesize && "                       \
 805         "cp.b $loadaddr $ubootaddr $filesize && "               \
 806         "protect on $ubootaddr +$filesize && "                  \
 807         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 808         "consoledev=ttyS0\0"                                    \
 809         "ramdiskaddr=2000000\0"                                 \
 810         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 811         "fdtaddr=1e00000\0"                                     \
 812         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 813         "bdev=sda3\0"
 814
 815 /* For emulation this causes u-boot to jump to the start of the proof point
 816    app code automatically */
 817 #define CONFIG_PROOF_POINTS                     \
 818  "setenv bootargs root=/dev/$bdev rw "          \
 819  "console=$consoledev,$baudrate $othbootargs;"  \
 820  "cpu 1 release 0x29000000 - - -;"              \
 821  "cpu 2 release 0x29000000 - - -;"              \
 822  "cpu 3 release 0x29000000 - - -;"              \
 823  "cpu 4 release 0x29000000 - - -;"              \
 824  "cpu 5 release 0x29000000 - - -;"              \
 825  "cpu 6 release 0x29000000 - - -;"              \
 826  "cpu 7 release 0x29000000 - - -;"              \
 827  "go 0x29000000"
 828
 829 #define CONFIG_HVBOOT   \
 830  "setenv bootargs config-addr=0x60000000; "     \
 831  "bootm 0x01000000 - 0x00f00000"
 832
 833 #define CONFIG_ALU                              \
 834  "setenv bootargs root=/dev/$bdev rw "          \
 835  "console=$consoledev,$baudrate $othbootargs;"  \
 836  "cpu 1 release 0x01000000 - - -;"              \
 837  "cpu 2 release 0x01000000 - - -;"              \
 838  "cpu 3 release 0x01000000 - - -;"              \
 839  "cpu 4 release 0x01000000 - - -;"              \
 840  "cpu 5 release 0x01000000 - - -;"              \
 841  "cpu 6 release 0x01000000 - - -;"              \
 842  "cpu 7 release 0x01000000 - - -;"              \
 843  "go 0x01000000"
 844
 845 #define CONFIG_LINUX                            \
 846  "setenv bootargs root=/dev/ram rw "            \
 847  "console=$consoledev,$baudrate $othbootargs;"  \
 848  "setenv ramdiskaddr 0x02000000;"               \
 849  "setenv fdtaddr 0x01e00000;"                   \
 850  "setenv loadaddr 0x1000000;"                   \
 851  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 852
 853 #define CONFIG_HDBOOT                                   \
 854         "setenv bootargs root=/dev/$bdev rw "           \
 855         "console=$consoledev,$baudrate $othbootargs;"   \
 856         "tftp $loadaddr $bootfile;"                     \
 857         "tftp $fdtaddr $fdtfile;"                       \
 858         "bootm $loadaddr - $fdtaddr"
 859
 860 #define CONFIG_NFSBOOTCOMMAND                   \
 861         "setenv bootargs root=/dev/nfs rw "     \
 862         "nfsroot=$serverip:$rootpath "          \
 863         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 864         "console=$consoledev,$baudrate $othbootargs;"   \
 865         "tftp $loadaddr $bootfile;"             \
 866         "tftp $fdtaddr $fdtfile;"               \
 867         "bootm $loadaddr - $fdtaddr"
 868
 869 #define CONFIG_RAMBOOTCOMMAND                           \
 870         "setenv bootargs root=/dev/ram rw "             \
 871         "console=$consoledev,$baudrate $othbootargs;"   \
 872         "tftp $ramdiskaddr $ramdiskfile;"               \
 873         "tftp $loadaddr $bootfile;"                     \
 874         "tftp $fdtaddr $fdtfile;"                       \
 875         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 876
 877 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 878
 879 #include <asm/fsl_secure_boot.h>
 880
 881 #endif  /* __CONFIG_H */