include/configs/B4860QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_DISPLAY_BOARDINFO
  11
  12 /*
  13  * B4860 QDS board configuration file
  14  */
  15 #define CONFIG_B4860QDS
  16 #define CONFIG_PHYS_64BIT
  17
  18 #ifdef CONFIG_RAMBOOT_PBL
  19 #define CONFIG_SYS_FSL_PBL_PBI  $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
  20 #define CONFIG_SYS_FSL_PBL_RCW  $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
  21 #ifndef CONFIG_NAND
  22 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  23 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  24 #else
  25 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  26 #define CONFIG_SPL_ENV_SUPPORT
  27 #define CONFIG_SPL_SERIAL_SUPPORT
  28 #define CONFIG_SPL_FLUSH_IMAGE
  29 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  30 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  31 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  32 #define CONFIG_SPL_I2C_SUPPORT
  33 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  34 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  35 #define CONFIG_SYS_TEXT_BASE            0x00201000
  36 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  37 #define CONFIG_SPL_PAD_TO               0x40000
  38 #define CONFIG_SPL_MAX_SIZE             0x28000
  39 #define RESET_VECTOR_OFFSET             0x27FFC
  40 #define BOOT_PAGE_OFFSET                0x27000
  41 #define CONFIG_SPL_NAND_SUPPORT
  42 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  43 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  44 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  45 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  46 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  47 #define CONFIG_SPL_NAND_BOOT
  48 #ifdef CONFIG_SPL_BUILD
  49 #define CONFIG_SPL_SKIP_RELOCATE
  50 #define CONFIG_SPL_COMMON_INIT_DDR
  51 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  52 #define CONFIG_SYS_NO_FLASH
  53 #endif
  54 #endif
  55 #endif
  56
  57 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  58 /* Set 1M boot space */
  59 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  60 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  61                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  62 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  63 #define CONFIG_SYS_NO_FLASH
  64 #endif
  65
  66 /* High Level Configuration Options */
  67 #define CONFIG_BOOKE
  68 #define CONFIG_E500                     /* BOOKE e500 family */
  69 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  70 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  71 #define CONFIG_MP                       /* support multiple processors */
  72
  73 #ifndef CONFIG_SYS_TEXT_BASE
  74 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  75 #endif
  76
  77 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  78 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  79 #endif
  80
  81 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  82 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  83 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  84 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  85 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  86 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  87 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  88 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  89
  90 #ifndef CONFIG_PPC_B4420
  91 #define CONFIG_SYS_SRIO
  92 #define CONFIG_SRIO1                    /* SRIO port 1 */
  93 #define CONFIG_SRIO2                    /* SRIO port 2 */
  94 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  95 #endif
  96
  97 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  98
  99 /* I2C bus multiplexer */
 100 #define I2C_MUX_PCA_ADDR                0x77
 101
 102 /* VSC Crossbar switches */
 103 #define CONFIG_VSC_CROSSBAR
 104 #define I2C_CH_DEFAULT                  0x8
 105 #define I2C_CH_VSC3316                  0xc
 106 #define I2C_CH_VSC3308                  0xd
 107
 108 #define VSC3316_TX_ADDRESS              0x70
 109 #define VSC3316_RX_ADDRESS              0x71
 110 #define VSC3308_TX_ADDRESS              0x02
 111 #define VSC3308_RX_ADDRESS              0x03
 112
 113 /* IDT clock synthesizers */
 114 #define CONFIG_IDT8T49N222A
 115 #define I2C_CH_IDT                     0x9
 116
 117 #define IDT_SERDES1_ADDRESS            0x6E
 118 #define IDT_SERDES2_ADDRESS            0x6C
 119
 120 /* Voltage monitor on channel 2*/
 121 #define I2C_MUX_CH_VOL_MONITOR          0xa
 122 #define I2C_VOL_MONITOR_ADDR            0x40
 123 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 124 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 125 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 126
 127 #define CONFIG_ZM7300
 128 #define I2C_MUX_CH_DPM                  0xa
 129 #define I2C_DPM_ADDR                    0x28
 130
 131 #define CONFIG_ENV_OVERWRITE
 132
 133 #ifdef CONFIG_SYS_NO_FLASH
 134 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
 135 #define CONFIG_ENV_IS_NOWHERE
 136 #endif
 137 #else
 138 #define CONFIG_FLASH_CFI_DRIVER
 139 #define CONFIG_SYS_FLASH_CFI
 140 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 141 #endif
 142
 143 #if defined(CONFIG_SPIFLASH)
 144 #define CONFIG_SYS_EXTRA_ENV_RELOC
 145 #define CONFIG_ENV_IS_IN_SPI_FLASH
 146 #define CONFIG_ENV_SPI_BUS              0
 147 #define CONFIG_ENV_SPI_CS               0
 148 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 149 #define CONFIG_ENV_SPI_MODE             0
 150 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 151 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 152 #define CONFIG_ENV_SECT_SIZE            0x10000
 153 #elif defined(CONFIG_SDCARD)
 154 #define CONFIG_SYS_EXTRA_ENV_RELOC
 155 #define CONFIG_ENV_IS_IN_MMC
 156 #define CONFIG_SYS_MMC_ENV_DEV          0
 157 #define CONFIG_ENV_SIZE                 0x2000
 158 #define CONFIG_ENV_OFFSET               (512 * 1097)
 159 #elif defined(CONFIG_NAND)
 160 #define CONFIG_SYS_EXTRA_ENV_RELOC
 161 #define CONFIG_ENV_IS_IN_NAND
 162 #define CONFIG_ENV_SIZE                 0x2000
 163 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 164 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 165 #define CONFIG_ENV_IS_IN_REMOTE
 166 #define CONFIG_ENV_ADDR         0xffe20000
 167 #define CONFIG_ENV_SIZE         0x2000
 168 #elif defined(CONFIG_ENV_IS_NOWHERE)
 169 #define CONFIG_ENV_SIZE         0x2000
 170 #else
 171 #define CONFIG_ENV_IS_IN_FLASH
 172 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 173 #define CONFIG_ENV_SIZE         0x2000
 174 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 175 #endif
 176
 177 #ifndef __ASSEMBLY__
 178 unsigned long get_board_sys_clk(void);
 179 unsigned long get_board_ddr_clk(void);
 180 #endif
 181 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 182 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 183
 184 /*
 185  * These can be toggled for performance analysis, otherwise use default.
 186  */
 187 #define CONFIG_SYS_CACHE_STASHING
 188 #define CONFIG_BTB                      /* toggle branch predition */
 189 #define CONFIG_DDR_ECC
 190 #ifdef CONFIG_DDR_ECC
 191 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 192 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 193 #endif
 194
 195 #define CONFIG_ENABLE_36BIT_PHYS
 196
 197 #ifdef CONFIG_PHYS_64BIT
 198 #define CONFIG_ADDR_MAP
 199 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 200 #endif
 201
 202 #if 0
 203 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 204 #endif
 205 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 206 #define CONFIG_SYS_MEMTEST_END          0x00400000
 207 #define CONFIG_SYS_ALT_MEMTEST
 208 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 209
 210 /*
 211  *  Config the L3 Cache as L3 SRAM
 212  */
 213 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 214 #define CONFIG_SYS_L3_SIZE              256 << 10
 215 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 216 #ifdef CONFIG_NAND
 217 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 218 #endif
 219 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 220 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 221 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 222 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 223
 224 #ifdef CONFIG_PHYS_64BIT
 225 #define CONFIG_SYS_DCSRBAR              0xf0000000
 226 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 227 #endif
 228
 229 /* EEPROM */
 230 #define CONFIG_ID_EEPROM
 231 #define CONFIG_SYS_I2C_EEPROM_NXID
 232 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 233 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 234 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 235 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 236 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 237
 238 /*
 239  * DDR Setup
 240  */
 241 #define CONFIG_VERY_BIG_RAM
 242 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 243 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 244
 245 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 246 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 247 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 248
 249 #define CONFIG_DDR_SPD
 250 #define CONFIG_SYS_DDR_RAW_TIMING
 251 #define CONFIG_SYS_FSL_DDR3
 252 #ifndef CONFIG_SPL_BUILD
 253 #define CONFIG_FSL_DDR_INTERACTIVE
 254 #endif
 255
 256 #define CONFIG_SYS_SPD_BUS_NUM  0
 257 #define SPD_EEPROM_ADDRESS1     0x51
 258 #define SPD_EEPROM_ADDRESS2     0x53
 259
 260 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 261 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 262
 263 /*
 264  * IFC Definitions
 265  */
 266 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 267 #ifdef CONFIG_PHYS_64BIT
 268 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 269 #else
 270 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 271 #endif
 272
 273 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 274 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 275                                 + 0x8000000) | \
 276                                 CSPR_PORT_SIZE_16 | \
 277                                 CSPR_MSEL_NOR | \
 278                                 CSPR_V)
 279 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 280 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 281                                 CSPR_PORT_SIZE_16 | \
 282                                 CSPR_MSEL_NOR | \
 283                                 CSPR_V)
 284 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 285 /* NOR Flash Timing Params */
 286 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 287 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 288                                 FTIM0_NOR_TEADC(0x04) | \
 289                                 FTIM0_NOR_TEAHC(0x20))
 290 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 291                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 292                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 293 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 294                                 FTIM2_NOR_TCH(0x0E) | \
 295                                 FTIM2_NOR_TWPH(0x0E) | \
 296                                 FTIM2_NOR_TWP(0x1c))
 297 #define CONFIG_SYS_NOR_FTIM3    0x0
 298
 299 #define CONFIG_SYS_FLASH_QUIET_TEST
 300 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 301
 302 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 303 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 304 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 305 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 306
 307 #define CONFIG_SYS_FLASH_EMPTY_INFO
 308 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 309                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 310
 311 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 312 #define CONFIG_FSL_QIXIS_V2
 313 #define QIXIS_BASE              0xffdf0000
 314 #ifdef CONFIG_PHYS_64BIT
 315 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 316 #else
 317 #define QIXIS_BASE_PHYS         QIXIS_BASE
 318 #endif
 319 #define QIXIS_LBMAP_SWITCH              0x01
 320 #define QIXIS_LBMAP_MASK                0x0f
 321 #define QIXIS_LBMAP_SHIFT               0
 322 #define QIXIS_LBMAP_DFLTBANK            0x00
 323 #define QIXIS_LBMAP_ALTBANK             0x02
 324 #define QIXIS_RST_CTL_RESET             0x31
 325 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 326 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 327 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 328
 329 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 330 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 331                                 | CSPR_PORT_SIZE_8 \
 332                                 | CSPR_MSEL_GPCM \
 333                                 | CSPR_V)
 334 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 335 #define CONFIG_SYS_CSOR3        0x0
 336 /* QIXIS Timing parameters for IFC CS3 */
 337 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 338                                         FTIM0_GPCM_TEADC(0x0e) | \
 339                                         FTIM0_GPCM_TEAHC(0x0e))
 340 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 341                                         FTIM1_GPCM_TRAD(0x1f))
 342 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 343                                         FTIM2_GPCM_TCH(0x8) | \
 344                                         FTIM2_GPCM_TWP(0x1f))
 345 #define CONFIG_SYS_CS3_FTIM3            0x0
 346
 347 /* NAND Flash on IFC */
 348 #define CONFIG_NAND_FSL_IFC
 349 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 350 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 351 #define CONFIG_SYS_NAND_BASE            0xff800000
 352 #ifdef CONFIG_PHYS_64BIT
 353 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 354 #else
 355 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 356 #endif
 357
 358 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 359 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 360                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 361                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 362                                 | CSPR_V)
 363 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 364
 365 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 366                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 367                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 368                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 369                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 370                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 371                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 372
 373 #define CONFIG_SYS_NAND_ONFI_DETECTION
 374
 375 /* ONFI NAND Flash mode0 Timing Params */
 376 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 377                                         FTIM0_NAND_TWP(0x18)   | \
 378                                         FTIM0_NAND_TWCHT(0x07) | \
 379                                         FTIM0_NAND_TWH(0x0a))
 380 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 381                                         FTIM1_NAND_TWBE(0x39)  | \
 382                                         FTIM1_NAND_TRR(0x0e)   | \
 383                                         FTIM1_NAND_TRP(0x18))
 384 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 385                                         FTIM2_NAND_TREH(0x0a) | \
 386                                         FTIM2_NAND_TWHRE(0x1e))
 387 #define CONFIG_SYS_NAND_FTIM3           0x0
 388
 389 #define CONFIG_SYS_NAND_DDR_LAW         11
 390
 391 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 392 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 393 #define CONFIG_CMD_NAND
 394
 395 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 396
 397 #if defined(CONFIG_NAND)
 398 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 399 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 400 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 401 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 402 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 403 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 404 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 405 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 406 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 407 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 408 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 409 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 410 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 411 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 412 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 413 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 414 #else
 415 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 416 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 417 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 418 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 419 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 420 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 421 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 422 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 423 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 424 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 425 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 426 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 427 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 428 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 429 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 430 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 431 #endif
 432 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 433 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 434 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 435 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 436 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 437 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 438 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 439 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 440
 441 #ifdef CONFIG_SPL_BUILD
 442 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 443 #else
 444 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 445 #endif
 446
 447 #if defined(CONFIG_RAMBOOT_PBL)
 448 #define CONFIG_SYS_RAMBOOT
 449 #endif
 450
 451 #define CONFIG_BOARD_EARLY_INIT_R
 452 #define CONFIG_MISC_INIT_R
 453
 454 #define CONFIG_HWCONFIG
 455
 456 /* define to use L1 as initial stack */
 457 #define CONFIG_L1_INIT_RAM
 458 #define CONFIG_SYS_INIT_RAM_LOCK
 459 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 460 #ifdef CONFIG_PHYS_64BIT
 461 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 462 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 463 /* The assembler doesn't like typecast */
 464 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 465         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 466           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 467 #else
 468 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 469 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 470 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 471 #endif
 472 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 473
 474 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 475                                         GENERATED_GBL_DATA_SIZE)
 476 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 477
 478 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 479 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 480
 481 /* Serial Port - controlled on board with jumper J8
 482  * open - index 2
 483  * shorted - index 1
 484  */
 485 #define CONFIG_CONS_INDEX       1
 486 #define CONFIG_SYS_NS16550_SERIAL
 487 #define CONFIG_SYS_NS16550_REG_SIZE     1
 488 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 489
 490 #define CONFIG_SYS_BAUDRATE_TABLE       \
 491         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 492
 493 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 494 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 495 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 496 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 497 #ifndef CONFIG_SPL_BUILD
 498 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 499 #endif
 500
 501
 502 /* Use the HUSH parser */
 503 #define CONFIG_SYS_HUSH_PARSER
 504 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 505
 506 /* pass open firmware flat tree */
 507 #define CONFIG_OF_LIBFDT
 508 #define CONFIG_OF_BOARD_SETUP
 509 #define CONFIG_OF_STDOUT_VIA_ALIAS
 510
 511 /* new uImage format support */
 512 #define CONFIG_FIT
 513 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 514
 515 /* I2C */
 516 #define CONFIG_SYS_I2C
 517 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 518 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 519 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 520 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 521 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 522 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 523 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 524
 525 /*
 526  * RTC configuration
 527  */
 528 #define RTC
 529 #define CONFIG_RTC_DS3231               1
 530 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 531
 532 /*
 533  * RapidIO
 534  */
 535 #ifdef CONFIG_SYS_SRIO
 536 #ifdef CONFIG_SRIO1
 537 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 538 #ifdef CONFIG_PHYS_64BIT
 539 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 540 #else
 541 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 542 #endif
 543 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 544 #endif
 545
 546 #ifdef CONFIG_SRIO2
 547 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 548 #ifdef CONFIG_PHYS_64BIT
 549 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 550 #else
 551 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 552 #endif
 553 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 554 #endif
 555 #endif
 556
 557 /*
 558  * for slave u-boot IMAGE instored in master memory space,
 559  * PHYS must be aligned based on the SIZE
 560  */
 561 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 562 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 563 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 564 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 565 /*
 566  * for slave UCODE and ENV instored in master memory space,
 567  * PHYS must be aligned based on the SIZE
 568  */
 569 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 570 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 571 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 572
 573 /* slave core release by master*/
 574 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 575 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 576
 577 /*
 578  * SRIO_PCIE_BOOT - SLAVE
 579  */
 580 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 581 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 582 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 583                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 584 #endif
 585
 586 /*
 587  * eSPI - Enhanced SPI
 588  */
 589 #define CONFIG_CMD_SF
 590 #define CONFIG_SF_DEFAULT_SPEED         10000000
 591 #define CONFIG_SF_DEFAULT_MODE          0
 592
 593 /*
 594  * MAPLE
 595  */
 596 #ifdef CONFIG_PHYS_64BIT
 597 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 598 #else
 599 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 600 #endif
 601
 602 /*
 603  * General PCI
 604  * Memory space is mapped 1-1, but I/O space must start from 0.
 605  */
 606
 607 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 608 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 609 #ifdef CONFIG_PHYS_64BIT
 610 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 611 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 612 #else
 613 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 614 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 615 #endif
 616 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 617 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 618 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 619 #ifdef CONFIG_PHYS_64BIT
 620 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 621 #else
 622 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 623 #endif
 624 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 625
 626 /* Qman/Bman */
 627 #ifndef CONFIG_NOBQFMAN
 628 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 629 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 630 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 631 #ifdef CONFIG_PHYS_64BIT
 632 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 633 #else
 634 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 635 #endif
 636 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 637 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 638 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 639 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 640 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 641 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 642                                         CONFIG_SYS_BMAN_CENA_SIZE)
 643 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 644 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 645 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 646 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 647 #ifdef CONFIG_PHYS_64BIT
 648 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 649 #else
 650 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 651 #endif
 652 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 653 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 654 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 655 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 656 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 657 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 658                                         CONFIG_SYS_QMAN_CENA_SIZE)
 659 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 660 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 661
 662 #define CONFIG_SYS_DPAA_FMAN
 663
 664 #define CONFIG_SYS_DPAA_RMAN
 665
 666 /* Default address of microcode for the Linux Fman driver */
 667 #if defined(CONFIG_SPIFLASH)
 668 /*
 669  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 670  * env, so we got 0x110000.
 671  */
 672 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 673 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 674 #elif defined(CONFIG_SDCARD)
 675 /*
 676  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 677  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 678  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 679  */
 680 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 681 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
 682 #elif defined(CONFIG_NAND)
 683 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 684 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
 685 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 686 /*
 687  * Slave has no ucode locally, it can fetch this from remote. When implementing
 688  * in two corenet boards, slave's ucode could be stored in master's memory
 689  * space, the address can be mapped from slave TLB->slave LAW->
 690  * slave SRIO or PCIE outbound window->master inbound window->
 691  * master LAW->the ucode address in master's memory space.
 692  */
 693 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 694 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 695 #else
 696 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 697 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 698 #endif
 699 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 700 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 701 #endif /* CONFIG_NOBQFMAN */
 702
 703 #ifdef CONFIG_SYS_DPAA_FMAN
 704 #define CONFIG_FMAN_ENET
 705 #define CONFIG_PHYLIB_10G
 706 #define CONFIG_PHY_VITESSE
 707 #define CONFIG_PHY_TERANETICS
 708 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 709 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 710 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 711 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 712 #endif
 713
 714 #ifdef CONFIG_PCI
 715 #define CONFIG_PCI_INDIRECT_BRIDGE
 716 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 717
 718 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 719 #define CONFIG_DOS_PARTITION
 720 #endif  /* CONFIG_PCI */
 721
 722 #ifdef CONFIG_FMAN_ENET
 723 #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
 724 #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
 725
 726 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 727 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 728 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 729
 730
 731 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 732 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 733 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 734 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 735
 736 #define CONFIG_MII              /* MII PHY management */
 737 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 738 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 739 #endif
 740
 741 #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
 742
 743 /*
 744  * Environment
 745  */
 746 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 747 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 748
 749 /*
 750  * Command line configuration.
 751  */
 752 #define CONFIG_CMD_DATE
 753 #define CONFIG_CMD_DHCP
 754 #define CONFIG_CMD_EEPROM
 755 #define CONFIG_CMD_ERRATA
 756 #define CONFIG_CMD_GREPENV
 757 #define CONFIG_CMD_IRQ
 758 #define CONFIG_CMD_I2C
 759 #define CONFIG_CMD_MII
 760 #define CONFIG_CMD_PING
 761 #define CONFIG_CMD_REGINFO
 762
 763 #ifdef CONFIG_PCI
 764 #define CONFIG_CMD_PCI
 765 #endif
 766
 767 /* Hash command with SHA acceleration supported in hardware */
 768 #ifdef CONFIG_FSL_CAAM
 769 #define CONFIG_CMD_HASH
 770 #define CONFIG_SHA_HW_ACCEL
 771 #endif
 772
 773 /*
 774 * USB
 775 */
 776 #define CONFIG_HAS_FSL_DR_USB
 777
 778 #ifdef CONFIG_HAS_FSL_DR_USB
 779 #define CONFIG_USB_EHCI
 780
 781 #ifdef CONFIG_USB_EHCI
 782 #define CONFIG_CMD_USB
 783 #define CONFIG_USB_STORAGE
 784 #define CONFIG_USB_EHCI_FSL
 785 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 786 #define CONFIG_CMD_EXT2
 787 #endif
 788 #endif
 789
 790 /*
 791  * Miscellaneous configurable options
 792  */
 793 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 794 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 795 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 796 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 797 #ifdef CONFIG_CMD_KGDB
 798 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 799 #else
 800 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 801 #endif
 802 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 803 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 804 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 805
 806 /*
 807  * For booting Linux, the board info and command line data
 808  * have to be in the first 64 MB of memory, since this is
 809  * the maximum mapped by the Linux kernel during initialization.
 810  */
 811 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 812 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 813
 814 #ifdef CONFIG_CMD_KGDB
 815 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 816 #endif
 817
 818 /*
 819  * Environment Configuration
 820  */
 821 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 822 #define CONFIG_BOOTFILE         "uImage"
 823 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 824
 825 /* default location for tftp and bootm */
 826 #define CONFIG_LOADADDR         1000000
 827
 828 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 829
 830 #define CONFIG_BAUDRATE 115200
 831
 832 #define __USB_PHY_TYPE  ulpi
 833
 834 #ifdef CONFIG_PPC_B4860
 835 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
 836                         "bank_intlv=cs0_cs1;"   \
 837                         "en_cpc:cpc2;"
 838 #else
 839 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
 840 #endif
 841
 842 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 843         HWCONFIG                                                \
 844         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 845         "netdev=eth0\0"                                         \
 846         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 847         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 848         "tftpflash=tftpboot $loadaddr $uboot && "               \
 849         "protect off $ubootaddr +$filesize && "                 \
 850         "erase $ubootaddr +$filesize && "                       \
 851         "cp.b $loadaddr $ubootaddr $filesize && "               \
 852         "protect on $ubootaddr +$filesize && "                  \
 853         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 854         "consoledev=ttyS0\0"                                    \
 855         "ramdiskaddr=2000000\0"                                 \
 856         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 857         "fdtaddr=c00000\0"                                      \
 858         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 859         "bdev=sda3\0"
 860
 861 /* For emulation this causes u-boot to jump to the start of the proof point
 862    app code automatically */
 863 #define CONFIG_PROOF_POINTS                     \
 864  "setenv bootargs root=/dev/$bdev rw "          \
 865  "console=$consoledev,$baudrate $othbootargs;"  \
 866  "cpu 1 release 0x29000000 - - -;"              \
 867  "cpu 2 release 0x29000000 - - -;"              \
 868  "cpu 3 release 0x29000000 - - -;"              \
 869  "cpu 4 release 0x29000000 - - -;"              \
 870  "cpu 5 release 0x29000000 - - -;"              \
 871  "cpu 6 release 0x29000000 - - -;"              \
 872  "cpu 7 release 0x29000000 - - -;"              \
 873  "go 0x29000000"
 874
 875 #define CONFIG_HVBOOT   \
 876  "setenv bootargs config-addr=0x60000000; "     \
 877  "bootm 0x01000000 - 0x00f00000"
 878
 879 #define CONFIG_ALU                              \
 880  "setenv bootargs root=/dev/$bdev rw "          \
 881  "console=$consoledev,$baudrate $othbootargs;"  \
 882  "cpu 1 release 0x01000000 - - -;"              \
 883  "cpu 2 release 0x01000000 - - -;"              \
 884  "cpu 3 release 0x01000000 - - -;"              \
 885  "cpu 4 release 0x01000000 - - -;"              \
 886  "cpu 5 release 0x01000000 - - -;"              \
 887  "cpu 6 release 0x01000000 - - -;"              \
 888  "cpu 7 release 0x01000000 - - -;"              \
 889  "go 0x01000000"
 890
 891 #define CONFIG_LINUX                            \
 892  "setenv bootargs root=/dev/ram rw "            \
 893  "console=$consoledev,$baudrate $othbootargs;"  \
 894  "setenv ramdiskaddr 0x02000000;"               \
 895  "setenv fdtaddr 0x00c00000;"                   \
 896  "setenv loadaddr 0x1000000;"                   \
 897  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 898
 899 #define CONFIG_HDBOOT                                   \
 900         "setenv bootargs root=/dev/$bdev rw "           \
 901         "console=$consoledev,$baudrate $othbootargs;"   \
 902         "tftp $loadaddr $bootfile;"                     \
 903         "tftp $fdtaddr $fdtfile;"                       \
 904         "bootm $loadaddr - $fdtaddr"
 905
 906 #define CONFIG_NFSBOOTCOMMAND                   \
 907         "setenv bootargs root=/dev/nfs rw "     \
 908         "nfsroot=$serverip:$rootpath "          \
 909         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 910         "console=$consoledev,$baudrate $othbootargs;"   \
 911         "tftp $loadaddr $bootfile;"             \
 912         "tftp $fdtaddr $fdtfile;"               \
 913         "bootm $loadaddr - $fdtaddr"
 914
 915 #define CONFIG_RAMBOOTCOMMAND                           \
 916         "setenv bootargs root=/dev/ram rw "             \
 917         "console=$consoledev,$baudrate $othbootargs;"   \
 918         "tftp $ramdiskaddr $ramdiskfile;"               \
 919         "tftp $loadaddr $bootfile;"                     \
 920         "tftp $fdtaddr $fdtfile;"                       \
 921         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 922
 923 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 924
 925 #include <asm/fsl_secure_boot.h>
 926
 927 #endif  /* __CONFIG_H */