include/configs/BSC9132QDS.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * BSC9132 QDS board configuration file
  25  */
  26
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 #ifdef CONFIG_BSC9132QDS
  31 #define CONFIG_BSC9132
  32 #endif
  33
  34 #define CONFIG_MISC_INIT_R
  35
  36 #ifdef CONFIG_SDCARD
  37 #define CONFIG_RAMBOOT_SDCARD
  38 #define CONFIG_SYS_RAMBOOT
  39 #define CONFIG_SYS_EXTRA_ENV_RELOC
  40 #define CONFIG_SYS_TEXT_BASE            0x11000000
  41 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  42 #endif
  43 #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769      1
  44 #ifdef CONFIG_SPIFLASH
  45 #define CONFIG_RAMBOOT_SPIFLASH
  46 #define CONFIG_SYS_RAMBOOT
  47 #define CONFIG_SYS_EXTRA_ENV_RELOC
  48 #define CONFIG_SYS_TEXT_BASE            0x11000000
  49 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  50 #endif
  51
  52 #ifdef CONFIG_NAND
  53 #define CONFIG_SPL
  54 #define CONFIG_SPL_INIT_MINIMAL
  55 #define CONFIG_SPL_SERIAL_SUPPORT
  56 #define CONFIG_SPL_NAND_SUPPORT
  57 #define CONFIG_SPL_NAND_MINIMAL
  58 #define CONFIG_SPL_FLUSH_IMAGE
  59 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  60
  61 #define CONFIG_SYS_TEXT_BASE            0x00201000
  62 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  63 #define CONFIG_SPL_MAX_SIZE             8192
  64 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  65 #define CONFIG_SPL_RELOC_STACK          0x00100000
  66 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((512 << 10) - 0x2000)
  67 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  68 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  69 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  70 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  71 #endif
  72
  73 #ifndef CONFIG_SYS_TEXT_BASE
  74 #define CONFIG_SYS_TEXT_BASE            0x8ff80000
  75 #endif
  76
  77 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  78 #define CONFIG_RESET_VECTOR_ADDRESS     0x8ffffffc
  79 #endif
  80
  81 #ifdef CONFIG_SPL_BUILD
  82 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  83 #else
  84 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  85 #endif
  86
  87 /* High Level Configuration Options */
  88 #define CONFIG_BOOKE                    /* BOOKE */
  89 #define CONFIG_E500                     /* BOOKE e500 family */
  90 #define CONFIG_MPC85xx
  91 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  92 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
  93
  94 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  95 #if defined(CONFIG_PCI)
  96 #define CONFIG_PCIE1                    /* PCIE controler 1 (slot 1) */
  97 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  98 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  99 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 100 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 101
 102 #define CONFIG_CMD_NET
 103 #define CONFIG_CMD_PCI
 104
 105 #define CONFIG_E1000                    /*  E1000 pci Ethernet card*/
 106
 107 /*
 108  * PCI Windows
 109  * Memory space is mapped 1-1, but I/O space must start from 0.
 110  */
 111 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 112 #define CONFIG_SYS_PCIE1_NAME           "PCIe Slot"
 113 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
 114 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
 115 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
 116 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 117 #define CONFIG_SYS_PCIE1_IO_VIRT        0xC0010000
 118 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 119 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 120 #define CONFIG_SYS_PCIE1_IO_PHYS        0xC0010000
 121
 122 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 123
 124 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 125 #define CONFIG_DOS_PARTITION
 126 #endif
 127
 128 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 129 #define CONFIG_ENV_OVERWRITE
 130 #define CONFIG_TSEC_ENET /* ethernet */
 131
 132 #if defined(CONFIG_SYS_CLK_100_DDR_100)
 133 #define CONFIG_SYS_CLK_FREQ     100000000
 134 #define CONFIG_DDR_CLK_FREQ     100000000
 135 #elif defined(CONFIG_SYS_CLK_100_DDR_133)
 136 #define CONFIG_SYS_CLK_FREQ     100000000
 137 #define CONFIG_DDR_CLK_FREQ     133000000
 138 #endif
 139
 140 #define CONFIG_MP
 141
 142 #define CONFIG_HWCONFIG
 143 /*
 144  * These can be toggled for performance analysis, otherwise use default.
 145  */
 146 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 147 #define CONFIG_BTB                      /* enable branch predition */
 148
 149 #define CONFIG_SYS_MEMTEST_START        0x01000000      /* memtest works on */
 150 #define CONFIG_SYS_MEMTEST_END          0x01ffffff
 151
 152 /* DDR Setup */
 153 #define CONFIG_FSL_DDR3
 154 #define CONFIG_SYS_SPD_BUS_NUM          0
 155 #define SPD_EEPROM_ADDRESS1             0x54 /* I2C access */
 156 #define SPD_EEPROM_ADDRESS2             0x56 /* I2C access */
 157 #define CONFIG_FSL_DDR_INTERACTIVE
 158
 159 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 160
 161 #define CONFIG_SYS_SDRAM_SIZE           (1024)
 162 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 163 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 164
 165 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 166
 167 /* DDR3 Controller Settings */
 168 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 169 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 170 #define CONFIG_SYS_DDR_CS0_CONFIG_1333  0x80004302
 171 #define CONFIG_SYS_DDR_CS0_CONFIG_800   0x80014302
 172 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 173 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 174 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 175 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 176 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 177 #define CONFIG_SYS_DDR1_CS0_BNDS       0x0040007F
 178
 179 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 180 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 181 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 182 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 183 #define CONFIG_SYS_DDR_CONTROL_800              0x470C0000
 184 #define CONFIG_SYS_DDR_CONTROL_2_800    0x04401050
 185 #define CONFIG_SYS_DDR_TIMING_4_800             0x00220001
 186 #define CONFIG_SYS_DDR_TIMING_5_800             0x03402400
 187
 188 #define CONFIG_SYS_DDR_CONTROL_1333             0x470C0008
 189 #define CONFIG_SYS_DDR_CONTROL_2_1333   0x24401010
 190 #define CONFIG_SYS_DDR_TIMING_4_1333            0x00000001
 191 #define CONFIG_SYS_DDR_TIMING_5_1333            0x03401400
 192
 193 #define CONFIG_SYS_DDR_TIMING_3_800             0x00020000
 194 #define CONFIG_SYS_DDR_TIMING_0_800             0x00330004
 195 #define CONFIG_SYS_DDR_TIMING_1_800             0x6f6B4846
 196 #define CONFIG_SYS_DDR_TIMING_2_800             0x0FA8C8CF
 197 #define CONFIG_SYS_DDR_CLK_CTRL_800             0x03000000
 198 #define CONFIG_SYS_DDR_MODE_1_800               0x40461520
 199 #define CONFIG_SYS_DDR_MODE_2_800               0x8000c000
 200 #define CONFIG_SYS_DDR_INTERVAL_800             0x0C300000
 201 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800        0x8655A608
 202
 203 #define CONFIG_SYS_DDR_TIMING_3_1333            0x01061000
 204 #define CONFIG_SYS_DDR_TIMING_0_1333            0x00440104
 205 #define CONFIG_SYS_DDR_TIMING_1_1333            0x98913A45
 206 #define CONFIG_SYS_DDR_TIMING_2_1333            0x0FB8B114
 207 #define CONFIG_SYS_DDR_CLK_CTRL_1333            0x02800000
 208 #define CONFIG_SYS_DDR_MODE_1_1333              0x00061A50
 209 #define CONFIG_SYS_DDR_MODE_2_1333              0x00100000
 210 #define CONFIG_SYS_DDR_INTERVAL_1333            0x144E0513
 211 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333       0x8655F607
 212
 213 /*FIXME: the following params are constant w.r.t diff freq
 214 combinations. this should be removed later
 215 */
 216 #if CONFIG_DDR_CLK_FREQ == 100000000
 217 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 218 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 219 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800
 220 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 221 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 222 #elif CONFIG_DDR_CLK_FREQ == 133000000
 223 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333
 224 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_1333
 225 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_1333
 226 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333
 227 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333
 228 #else
 229 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 230 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 231 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_800
 232 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 233 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 234 #endif
 235
 236
 237 /* relocated CCSRBAR */
 238 #define CONFIG_SYS_CCSRBAR      CONFIG_SYS_CCSRBAR_DEFAULT
 239 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR_DEFAULT
 240
 241 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR
 242
 243 /*
 244  * IFC Definitions
 245  */
 246 /* NOR Flash on IFC */
 247
 248 #ifdef CONFIG_SPL_BUILD
 249 #define CONFIG_SYS_NO_FLASH
 250 #endif
 251 #define CONFIG_SYS_FLASH_BASE           0x88000000
 252 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* Max number of sector: 32M */
 253
 254 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 255
 256 #define CONFIG_SYS_NOR_CSPR     0x88000101
 257 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 258 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(5)
 259 /* NOR Flash Timing Params */
 260
 261 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) \
 262                                 | FTIM0_NOR_TEADC(0x03) \
 263                                 | FTIM0_NOR_TAVDS(0x00) \
 264                                 | FTIM0_NOR_TEAHC(0x0f))
 265 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1d) \
 266                                 | FTIM1_NOR_TRAD_NOR(0x09) \
 267                                 | FTIM1_NOR_TSEQRAD_NOR(0x09))
 268 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x1) \
 269                                 | FTIM2_NOR_TCH(0x4) \
 270                                 | FTIM2_NOR_TWPH(0x7) \
 271                                 | FTIM2_NOR_TWP(0x1e))
 272 #define CONFIG_SYS_NOR_FTIM3    0x0
 273
 274 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 275 #define CONFIG_SYS_FLASH_QUIET_TEST
 276 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 277 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 278
 279 #undef CONFIG_SYS_FLASH_CHECKSUM
 280 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 281 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 282
 283 /* CFI for NOR Flash */
 284 #define CONFIG_FLASH_CFI_DRIVER
 285 #define CONFIG_SYS_FLASH_CFI
 286 #define CONFIG_SYS_FLASH_EMPTY_INFO
 287 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 288
 289 /* NAND Flash on IFC */
 290 #define CONFIG_SYS_NAND_BASE            0xff800000
 291 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 292
 293 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 294                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 295                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 296                                 | CSPR_V)
 297 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 298
 299 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 300                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 301                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 302                                 | CSOR_NAND_RAL_2       /* RAL = 2Byes */ \
 303                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 304                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 305                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 306
 307 /* NAND Flash Timing Params */
 308 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x03) \
 309                                         | FTIM0_NAND_TWP(0x05) \
 310                                         | FTIM0_NAND_TWCHT(0x02) \
 311                                         | FTIM0_NAND_TWH(0x04))
 312 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x1c) \
 313                                         | FTIM1_NAND_TWBE(0x1e) \
 314                                         | FTIM1_NAND_TRR(0x07) \
 315                                         | FTIM1_NAND_TRP(0x05))
 316 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x08) \
 317                                         | FTIM2_NAND_TREH(0x04) \
 318                                         | FTIM2_NAND_TWHRE(0x11))
 319 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 320
 321 #define CONFIG_SYS_NAND_DDR_LAW         11
 322
 323 /* NAND */
 324 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 325 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 326 #define CONFIG_MTD_NAND_VERIFY_WRITE
 327 #define CONFIG_CMD_NAND
 328
 329 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 330
 331 #ifndef CONFIG_SPL_BUILD
 332 #define CONFIG_FSL_QIXIS
 333 #endif
 334 #ifdef CONFIG_FSL_QIXIS
 335 #define CONFIG_SYS_FPGA_BASE    0xffb00000
 336 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 337 #define QIXIS_BASE      CONFIG_SYS_FPGA_BASE
 338 #define QIXIS_LBMAP_SWITCH      9
 339 #define QIXIS_LBMAP_MASK        0x07
 340 #define QIXIS_LBMAP_SHIFT       0
 341 #define QIXIS_LBMAP_DFLTBANK            0x00
 342 #define QIXIS_LBMAP_ALTBANK             0x04
 343 #define QIXIS_RST_CTL_RESET             0x83
 344 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 345 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 346 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 347
 348 #define CONFIG_SYS_FPGA_BASE_PHYS       CONFIG_SYS_FPGA_BASE
 349
 350 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \
 351                                         | CSPR_PORT_SIZE_8 \
 352                                         | CSPR_MSEL_GPCM \
 353                                         | CSPR_V)
 354 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 355 #define CONFIG_SYS_CSOR2                0x0
 356 /* CPLD Timing parameters for IFC CS3 */
 357 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 358                                         FTIM0_GPCM_TEADC(0x0e) | \
 359                                         FTIM0_GPCM_TEAHC(0x0e))
 360 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 361                                         FTIM1_GPCM_TRAD(0x1f))
 362 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 363                                         FTIM2_GPCM_TCH(0x0) | \
 364                                         FTIM2_GPCM_TWP(0x1f))
 365 #define CONFIG_SYS_CS2_FTIM3            0x0
 366 #endif
 367
 368 /* Set up IFC registers for boot location NOR/NAND */
 369 #if defined(CONFIG_NAND)
 370 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 371 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 372 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 373 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 374 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 375 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 376 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 377 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 378 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 379 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 380 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 381 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 382 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 383 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 384 #else
 385 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 386 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 387 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 388 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 389 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 390 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 391 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 392 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 393 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 394 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 395 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 396 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 397 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 398 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 399 #endif
 400
 401 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 402 #define CONFIG_BOARD_EARLY_INIT_R
 403
 404 #define CONFIG_SYS_INIT_RAM_LOCK
 405 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 406 #define CONFIG_SYS_INIT_RAM_END         0x00004000 /* End of used area in RAM */
 407
 408 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END \
 409                                                 - GENERATED_GBL_DATA_SIZE)
 410 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 411
 412 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024) /* Reserve 256 kB for Mon*/
 413 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 414
 415 /* Serial Port */
 416 #define CONFIG_CONS_INDEX       1
 417 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 418 #define CONFIG_SYS_NS16550
 419 #define CONFIG_SYS_NS16550_SERIAL
 420 #define CONFIG_SYS_NS16550_REG_SIZE     1
 421 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 422 #ifdef CONFIG_SPL_BUILD
 423 #define CONFIG_NS16550_MIN_FUNCTIONS
 424 #endif
 425
 426 #define CONFIG_SERIAL_MULTI     1 /* Enable both serial ports */
 427 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 428
 429 #define CONFIG_SYS_BAUDRATE_TABLE       \
 430         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 431
 432 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 433 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 434 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700)
 435 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800)
 436
 437 /* Use the HUSH parser */
 438 #define CONFIG_SYS_HUSH_PARSER    /* hush parser */
 439 #ifdef  CONFIG_SYS_HUSH_PARSER
 440 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 441 #endif
 442
 443 /*
 444  * Pass open firmware flat tree
 445  */
 446 #define CONFIG_OF_LIBFDT
 447 #define CONFIG_OF_BOARD_SETUP
 448 #define CONFIG_OF_STDOUT_VIA_ALIAS
 449
 450 /* new uImage format support */
 451 #define CONFIG_FIT
 452 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 453
 454 #define CONFIG_SYS_I2C
 455 #define CONFIG_SYS_I2C_FSL
 456 #define CONFIG_SYS_FSL_I2C_SPEED        400800 /* I2C speed and slave address*/
 457 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 458 #define CONFIG_SYS_FSL_I2C2_SPEED       400800 /* I2C speed and slave address*/
 459 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 460 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 461 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 462
 463 /* I2C EEPROM */
 464 #define CONFIG_ID_EEPROM
 465 #ifdef CONFIG_ID_EEPROM
 466 #define CONFIG_SYS_I2C_EEPROM_NXID
 467 #endif
 468 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 469 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 470 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 471
 472 /* enable read and write access to EEPROM */
 473 #define CONFIG_CMD_EEPROM
 474 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 475 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 476 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 477 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 478
 479 /* I2C FPGA */
 480 #define CONFIG_I2C_FPGA
 481 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 482
 483 #define CONFIG_RTC_DS3231
 484 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 485
 486 /*
 487  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 488  * used for SLIC
 489  */
 490 /* eSPI - Enhanced SPI */
 491 #define CONFIG_FSL_ESPI  /* SPI */
 492 #ifdef CONFIG_FSL_ESPI
 493 #define CONFIG_SPI_FLASH
 494 #define CONFIG_SPI_FLASH_SPANSION
 495 #define CONFIG_CMD_SF
 496 #define CONFIG_SF_DEFAULT_SPEED         10000000
 497 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 498 #endif
 499
 500 #if defined(CONFIG_TSEC_ENET)
 501
 502 #define CONFIG_MII                      /* MII PHY management */
 503 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 504 #define CONFIG_TSEC1    1
 505 #define CONFIG_TSEC1_NAME       "eTSEC1"
 506 #define CONFIG_TSEC2    1
 507 #define CONFIG_TSEC2_NAME       "eTSEC2"
 508
 509 #define TSEC1_PHY_ADDR          0
 510 #define TSEC2_PHY_ADDR          1
 511
 512 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 513 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 514
 515 #define TSEC1_PHYIDX            0
 516 #define TSEC2_PHYIDX            0
 517
 518 #define CONFIG_ETHPRIME         "eTSEC1"
 519
 520 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 521
 522 /* TBI PHY configuration for SGMII mode */
 523 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 524                 TBICR_PHY_RESET \
 525                 | TBICR_ANEG_ENABLE \
 526                 | TBICR_FULL_DUPLEX \
 527                 | TBICR_SPEED1_SET \
 528                 )
 529
 530 #endif  /* CONFIG_TSEC_ENET */
 531
 532 #define CONFIG_MMC
 533 #ifdef CONFIG_MMC
 534 #define CONFIG_CMD_MMC
 535 #define CONFIG_DOS_PARTITION
 536 #define CONFIG_FSL_ESDHC
 537 #define CONFIG_GENERIC_MMC
 538 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 539 #endif
 540
 541 #define CONFIG_USB_EHCI  /* USB */
 542 #ifdef CONFIG_USB_EHCI
 543 #define CONFIG_CMD_USB
 544 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 545 #define CONFIG_USB_EHCI_FSL
 546 #define CONFIG_USB_STORAGE
 547 #define CONFIG_HAS_FSL_DR_USB
 548 #endif
 549
 550 /*
 551  * Environment
 552  */
 553 #if defined(CONFIG_RAMBOOT_SDCARD)
 554 #define CONFIG_ENV_IS_IN_MMC
 555 #define CONFIG_SYS_MMC_ENV_DEV          0
 556 #define CONFIG_ENV_SIZE                 0x2000
 557 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 558 #define CONFIG_ENV_IS_IN_SPI_FLASH
 559 #define CONFIG_ENV_SPI_BUS      0
 560 #define CONFIG_ENV_SPI_CS       0
 561 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 562 #define CONFIG_ENV_SPI_MODE     0
 563 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 564 #define CONFIG_ENV_SECT_SIZE    0x10000
 565 #define CONFIG_ENV_SIZE         0x2000
 566 #elif defined(CONFIG_NAND)
 567 #define CONFIG_ENV_IS_IN_NAND
 568 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 569 #define CONFIG_ENV_OFFSET       ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 570 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 571 #elif defined(CONFIG_SYS_RAMBOOT)
 572 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 573 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 574 #define CONFIG_ENV_SIZE                 0x2000
 575 #else
 576 #define CONFIG_ENV_IS_IN_FLASH
 577 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 578 #define CONFIG_ENV_ADDR 0xfff80000
 579 #else
 580 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 581 #endif
 582 #define CONFIG_ENV_SIZE         0x2000
 583 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 584 #endif
 585
 586 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 587 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 588
 589 /*
 590  * Command line configuration.
 591  */
 592 #include <config_cmd_default.h>
 593
 594 #define CONFIG_CMD_DATE
 595 #define CONFIG_CMD_DHCP
 596 #define CONFIG_CMD_ELF
 597 #define CONFIG_CMD_ERRATA
 598 #define CONFIG_CMD_I2C
 599 #define CONFIG_CMD_IRQ
 600 #define CONFIG_CMD_MII
 601 #define CONFIG_CMD_PING
 602 #define CONFIG_CMD_SETEXPR
 603 #define CONFIG_CMD_REGINFO
 604
 605 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 606 #define CONFIG_CMD_EXT2
 607 #define CONFIG_CMD_FAT
 608 #define CONFIG_DOS_PARTITION
 609 #endif
 610
 611 /*
 612  * Miscellaneous configurable options
 613  */
 614 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 615 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 616 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 617 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 618 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 619
 620 #if defined(CONFIG_CMD_KGDB)
 621 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 622 #else
 623 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 624 #endif
 625 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 626                                                 /* Print Buffer Size */
 627 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 628 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 629 #define CONFIG_SYS_HZ           1000            /* decrementer freq:1ms ticks */
 630
 631
 632 /*
 633  * For booting Linux, the board info and command line data
 634  * have to be in the first 64 MB of memory, since this is
 635  * the maximum mapped by the Linux kernel during initialization.
 636  */
 637 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 638 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 639
 640 #if defined(CONFIG_CMD_KGDB)
 641 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 642 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 643 #endif
 644
 645 /*
 646  * Environment Configuration
 647  */
 648
 649 #if defined(CONFIG_TSEC_ENET)
 650 #define CONFIG_HAS_ETH0
 651 #define CONFIG_HAS_ETH1
 652 #endif
 653
 654 #define CONFIG_HOSTNAME         BSC9132qds
 655 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 656 #define CONFIG_BOOTFILE         "uImage"
 657 #define CONFIG_UBOOTPATH        "u-boot.bin"
 658
 659 #define CONFIG_BAUDRATE         115200
 660
 661 #ifdef CONFIG_SDCARD
 662 #define CONFIG_DEF_HWCONFIG     "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 663 #else
 664 #define CONFIG_DEF_HWCONFIG     "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0"
 665 #endif
 666
 667 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 668         "netdev=eth0\0"                                         \
 669         "uboot=" CONFIG_UBOOTPATH "\0"                          \
 670         "loadaddr=1000000\0"                    \
 671         "bootfile=uImage\0"     \
 672         "consoledev=ttyS0\0"                            \
 673         "ramdiskaddr=2000000\0"                 \
 674         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 675         "fdtaddr=c00000\0"                              \
 676         "fdtfile=bsc9132qds.dtb\0"              \
 677         "bdev=sda1\0"   \
 678         CONFIG_DEF_HWCONFIG\
 679         "othbootargs=mem=880M ramdisk_size=600000 " \
 680                 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \
 681                 "isolcpus=0\0" \
 682         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 683                 "console=$consoledev,$baudrate $othbootargs; "  \
 684                 "usb start;"                    \
 685                 "ext2load usb 0:4 $loadaddr $bootfile;"         \
 686                 "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 687                 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 688                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 689         "debug_halt_off=mw ff7e0e30 0xf0000000;"
 690
 691 #define CONFIG_NFSBOOTCOMMAND   \
 692         "setenv bootargs root=/dev/nfs rw "     \
 693         "nfsroot=$serverip:$rootpath "  \
 694         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 695         "console=$consoledev,$baudrate $othbootargs;" \
 696         "tftp $loadaddr $bootfile;"     \
 697         "tftp $fdtaddr $fdtfile;"       \
 698         "bootm $loadaddr - $fdtaddr"
 699
 700 #define CONFIG_HDBOOT   \
 701         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 702         "console=$consoledev,$baudrate $othbootargs;" \
 703         "usb start;"    \
 704         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 705         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 706         "bootm $loadaddr - $fdtaddr"
 707
 708 #define CONFIG_RAMBOOTCOMMAND           \
 709         "setenv bootargs root=/dev/ram rw "     \
 710         "console=$consoledev,$baudrate $othbootargs; "  \
 711         "tftp $ramdiskaddr $ramdiskfile;"       \
 712         "tftp $loadaddr $bootfile;"             \
 713         "tftp $fdtaddr $fdtfile;"               \
 714         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 715
 716 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 717
 718 #endif  /* __CONFIG_H */