include/configs/BSC9132QDS.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * BSC9132 QDS board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_SYS_GENERIC_BOARD
  15 #define CONFIG_DISPLAY_BOARDINFO
  16
  17 #ifdef CONFIG_BSC9132QDS
  18 #define CONFIG_BSC9132
  19 #endif
  20
  21 #define CONFIG_MISC_INIT_R
  22
  23 #ifdef CONFIG_SDCARD
  24 #define CONFIG_RAMBOOT_SDCARD
  25 #define CONFIG_SYS_RAMBOOT
  26 #define CONFIG_SYS_EXTRA_ENV_RELOC
  27 #define CONFIG_SYS_TEXT_BASE            0x11000000
  28 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  29 #endif
  30 #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769      1
  31 #ifdef CONFIG_SPIFLASH
  32 #define CONFIG_RAMBOOT_SPIFLASH
  33 #define CONFIG_SYS_RAMBOOT
  34 #define CONFIG_SYS_EXTRA_ENV_RELOC
  35 #define CONFIG_SYS_TEXT_BASE            0x11000000
  36 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  37 #endif
  38 #ifdef CONFIG_NAND_SECBOOT
  39 #define CONFIG_RAMBOOT_NAND
  40 #define CONFIG_SYS_RAMBOOT
  41 #define CONFIG_SYS_EXTRA_ENV_RELOC
  42 #define CONFIG_SYS_TEXT_BASE            0x11000000
  43 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  44 #endif
  45
  46 #ifdef CONFIG_NAND
  47 #define CONFIG_SPL_INIT_MINIMAL
  48 #define CONFIG_SPL_SERIAL_SUPPORT
  49 #define CONFIG_SPL_NAND_SUPPORT
  50 #define CONFIG_SPL_NAND_BOOT
  51 #define CONFIG_SPL_FLUSH_IMAGE
  52 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  53
  54 #define CONFIG_SYS_TEXT_BASE            0x00201000
  55 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  56 #define CONFIG_SPL_MAX_SIZE             8192
  57 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  58 #define CONFIG_SPL_RELOC_STACK          0x00100000
  59 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  60 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  61 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  62 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  63 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  64 #endif
  65
  66 #ifndef CONFIG_SYS_TEXT_BASE
  67 #define CONFIG_SYS_TEXT_BASE            0x8ff40000
  68 #endif
  69
  70 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  71 #define CONFIG_RESET_VECTOR_ADDRESS     0x8ffffffc
  72 #endif
  73
  74 #ifdef CONFIG_SPL_BUILD
  75 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  76 #else
  77 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  78 #endif
  79
  80 /* High Level Configuration Options */
  81 #define CONFIG_BOOKE                    /* BOOKE */
  82 #define CONFIG_E500                     /* BOOKE e500 family */
  83 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  84 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  85 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
  86
  87 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  88 #if defined(CONFIG_PCI)
  89 #define CONFIG_PCIE1                    /* PCIE controler 1 (slot 1) */
  90 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  91 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  92 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
  93 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  94
  95 #define CONFIG_CMD_NET
  96 #define CONFIG_CMD_PCI
  97
  98 #define CONFIG_E1000                    /*  E1000 pci Ethernet card*/
  99
 100 /*
 101  * PCI Windows
 102  * Memory space is mapped 1-1, but I/O space must start from 0.
 103  */
 104 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 105 #define CONFIG_SYS_PCIE1_NAME           "PCIe Slot"
 106 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
 107 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
 108 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
 109 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 110 #define CONFIG_SYS_PCIE1_IO_VIRT        0xC0010000
 111 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 112 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 113 #define CONFIG_SYS_PCIE1_IO_PHYS        0xC0010000
 114
 115 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 116
 117 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 118 #define CONFIG_DOS_PARTITION
 119 #endif
 120
 121 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 122 #define CONFIG_ENV_OVERWRITE
 123 #define CONFIG_TSEC_ENET /* ethernet */
 124
 125 #if defined(CONFIG_SYS_CLK_100_DDR_100)
 126 #define CONFIG_SYS_CLK_FREQ     100000000
 127 #define CONFIG_DDR_CLK_FREQ     100000000
 128 #elif defined(CONFIG_SYS_CLK_100_DDR_133)
 129 #define CONFIG_SYS_CLK_FREQ     100000000
 130 #define CONFIG_DDR_CLK_FREQ     133000000
 131 #endif
 132
 133 #define CONFIG_MP
 134
 135 #define CONFIG_HWCONFIG
 136 /*
 137  * These can be toggled for performance analysis, otherwise use default.
 138  */
 139 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 140 #define CONFIG_BTB                      /* enable branch predition */
 141
 142 #define CONFIG_SYS_MEMTEST_START        0x01000000      /* memtest works on */
 143 #define CONFIG_SYS_MEMTEST_END          0x01ffffff
 144
 145 /* DDR Setup */
 146 #define CONFIG_SYS_FSL_DDR3
 147 #define CONFIG_SYS_SPD_BUS_NUM          0
 148 #define SPD_EEPROM_ADDRESS1             0x54 /* I2C access */
 149 #define SPD_EEPROM_ADDRESS2             0x56 /* I2C access */
 150 #define CONFIG_FSL_DDR_INTERACTIVE
 151
 152 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 153
 154 #define CONFIG_SYS_SDRAM_SIZE           (1024)
 155 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 156 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 157
 158 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 159
 160 /* DDR3 Controller Settings */
 161 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 162 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 163 #define CONFIG_SYS_DDR_CS0_CONFIG_1333  0x80004302
 164 #define CONFIG_SYS_DDR_CS0_CONFIG_800   0x80014302
 165 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 166 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 167 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 168 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 169 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 170 #define CONFIG_SYS_DDR1_CS0_BNDS       0x0040007F
 171
 172 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 173 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 174 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 175 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 176 #define CONFIG_SYS_DDR_CONTROL_800              0x470C0000
 177 #define CONFIG_SYS_DDR_CONTROL_2_800    0x04401050
 178 #define CONFIG_SYS_DDR_TIMING_4_800             0x00220001
 179 #define CONFIG_SYS_DDR_TIMING_5_800             0x03402400
 180
 181 #define CONFIG_SYS_DDR_CONTROL_1333             0x470C0008
 182 #define CONFIG_SYS_DDR_CONTROL_2_1333   0x24401010
 183 #define CONFIG_SYS_DDR_TIMING_4_1333            0x00000001
 184 #define CONFIG_SYS_DDR_TIMING_5_1333            0x03401400
 185
 186 #define CONFIG_SYS_DDR_TIMING_3_800             0x00020000
 187 #define CONFIG_SYS_DDR_TIMING_0_800             0x00330004
 188 #define CONFIG_SYS_DDR_TIMING_1_800             0x6f6B4846
 189 #define CONFIG_SYS_DDR_TIMING_2_800             0x0FA8C8CF
 190 #define CONFIG_SYS_DDR_CLK_CTRL_800             0x03000000
 191 #define CONFIG_SYS_DDR_MODE_1_800               0x40461520
 192 #define CONFIG_SYS_DDR_MODE_2_800               0x8000c000
 193 #define CONFIG_SYS_DDR_INTERVAL_800             0x0C300000
 194 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800        0x8655A608
 195
 196 #define CONFIG_SYS_DDR_TIMING_3_1333            0x01061000
 197 #define CONFIG_SYS_DDR_TIMING_0_1333            0x00440104
 198 #define CONFIG_SYS_DDR_TIMING_1_1333            0x98913A45
 199 #define CONFIG_SYS_DDR_TIMING_2_1333            0x0FB8B114
 200 #define CONFIG_SYS_DDR_CLK_CTRL_1333            0x02800000
 201 #define CONFIG_SYS_DDR_MODE_1_1333              0x00061A50
 202 #define CONFIG_SYS_DDR_MODE_2_1333              0x00100000
 203 #define CONFIG_SYS_DDR_INTERVAL_1333            0x144E0513
 204 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333       0x8655F607
 205
 206 /*FIXME: the following params are constant w.r.t diff freq
 207 combinations. this should be removed later
 208 */
 209 #if CONFIG_DDR_CLK_FREQ == 100000000
 210 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 211 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 212 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800
 213 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 214 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 215 #elif CONFIG_DDR_CLK_FREQ == 133000000
 216 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333
 217 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_1333
 218 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_1333
 219 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333
 220 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333
 221 #else
 222 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 223 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 224 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_800
 225 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 226 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 227 #endif
 228
 229
 230 /* relocated CCSRBAR */
 231 #define CONFIG_SYS_CCSRBAR      CONFIG_SYS_CCSRBAR_DEFAULT
 232 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR_DEFAULT
 233
 234 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR
 235
 236 /* DSP CCSRBAR */
 237 #define CONFIG_SYS_FSL_DSP_CCSRBAR      CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 238 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 239
 240 /*
 241  * IFC Definitions
 242  */
 243 /* NOR Flash on IFC */
 244
 245 #ifdef CONFIG_SPL_BUILD
 246 #define CONFIG_SYS_NO_FLASH
 247 #endif
 248 #define CONFIG_SYS_FLASH_BASE           0x88000000
 249 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* Max number of sector: 32M */
 250
 251 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 252
 253 #define CONFIG_SYS_NOR_CSPR     0x88000101
 254 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 255 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(5)
 256 /* NOR Flash Timing Params */
 257
 258 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) \
 259                                 | FTIM0_NOR_TEADC(0x03) \
 260                                 | FTIM0_NOR_TAVDS(0x00) \
 261                                 | FTIM0_NOR_TEAHC(0x0f))
 262 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1d) \
 263                                 | FTIM1_NOR_TRAD_NOR(0x09) \
 264                                 | FTIM1_NOR_TSEQRAD_NOR(0x09))
 265 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x1) \
 266                                 | FTIM2_NOR_TCH(0x4) \
 267                                 | FTIM2_NOR_TWPH(0x7) \
 268                                 | FTIM2_NOR_TWP(0x1e))
 269 #define CONFIG_SYS_NOR_FTIM3    0x0
 270
 271 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 272 #define CONFIG_SYS_FLASH_QUIET_TEST
 273 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 274 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 275
 276 #undef CONFIG_SYS_FLASH_CHECKSUM
 277 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 278 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 279
 280 /* CFI for NOR Flash */
 281 #define CONFIG_FLASH_CFI_DRIVER
 282 #define CONFIG_SYS_FLASH_CFI
 283 #define CONFIG_SYS_FLASH_EMPTY_INFO
 284 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 285
 286 /* NAND Flash on IFC */
 287 #define CONFIG_SYS_NAND_BASE            0xff800000
 288 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 289
 290 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 291                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 292                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 293                                 | CSPR_V)
 294 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 295
 296 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 297                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 298                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 299                                 | CSOR_NAND_RAL_2       /* RAL = 2Byes */ \
 300                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 301                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 302                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 303
 304 /* NAND Flash Timing Params */
 305 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x03) \
 306                                         | FTIM0_NAND_TWP(0x05) \
 307                                         | FTIM0_NAND_TWCHT(0x02) \
 308                                         | FTIM0_NAND_TWH(0x04))
 309 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x1c) \
 310                                         | FTIM1_NAND_TWBE(0x1e) \
 311                                         | FTIM1_NAND_TRR(0x07) \
 312                                         | FTIM1_NAND_TRP(0x05))
 313 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x08) \
 314                                         | FTIM2_NAND_TREH(0x04) \
 315                                         | FTIM2_NAND_TWHRE(0x11))
 316 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 317
 318 #define CONFIG_SYS_NAND_DDR_LAW         11
 319
 320 /* NAND */
 321 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 322 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 323 #define CONFIG_MTD_NAND_VERIFY_WRITE
 324 #define CONFIG_CMD_NAND
 325
 326 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 327
 328 #ifndef CONFIG_SPL_BUILD
 329 #define CONFIG_FSL_QIXIS
 330 #endif
 331 #ifdef CONFIG_FSL_QIXIS
 332 #define CONFIG_SYS_FPGA_BASE    0xffb00000
 333 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 334 #define QIXIS_BASE      CONFIG_SYS_FPGA_BASE
 335 #define QIXIS_LBMAP_SWITCH      9
 336 #define QIXIS_LBMAP_MASK        0x07
 337 #define QIXIS_LBMAP_SHIFT       0
 338 #define QIXIS_LBMAP_DFLTBANK            0x00
 339 #define QIXIS_LBMAP_ALTBANK             0x04
 340 #define QIXIS_RST_CTL_RESET             0x83
 341 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 342 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 343 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 344
 345 #define CONFIG_SYS_FPGA_BASE_PHYS       CONFIG_SYS_FPGA_BASE
 346
 347 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \
 348                                         | CSPR_PORT_SIZE_8 \
 349                                         | CSPR_MSEL_GPCM \
 350                                         | CSPR_V)
 351 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 352 #define CONFIG_SYS_CSOR2                0x0
 353 /* CPLD Timing parameters for IFC CS3 */
 354 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 355                                         FTIM0_GPCM_TEADC(0x0e) | \
 356                                         FTIM0_GPCM_TEAHC(0x0e))
 357 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 358                                         FTIM1_GPCM_TRAD(0x1f))
 359 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 360                                         FTIM2_GPCM_TCH(0x8) | \
 361                                         FTIM2_GPCM_TWP(0x1f))
 362 #define CONFIG_SYS_CS2_FTIM3            0x0
 363 #endif
 364
 365 /* Set up IFC registers for boot location NOR/NAND */
 366 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 367 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 368 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 369 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 370 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 371 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 372 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 373 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 374 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 375 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 376 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 377 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 378 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 379 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 380 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 381 #else
 382 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 383 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 384 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 385 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 386 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 387 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 388 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 389 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 390 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 391 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 392 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 393 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 394 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 395 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 396 #endif
 397
 398 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 399 #define CONFIG_BOARD_EARLY_INIT_R
 400
 401 #define CONFIG_SYS_INIT_RAM_LOCK
 402 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 403 #define CONFIG_SYS_INIT_RAM_END         0x00004000 /* End of used area in RAM */
 404
 405 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END \
 406                                                 - GENERATED_GBL_DATA_SIZE)
 407 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 408
 409 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 410 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 411
 412 /* Serial Port */
 413 #define CONFIG_CONS_INDEX       1
 414 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 415 #define CONFIG_SYS_NS16550
 416 #define CONFIG_SYS_NS16550_SERIAL
 417 #define CONFIG_SYS_NS16550_REG_SIZE     1
 418 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 419 #ifdef CONFIG_SPL_BUILD
 420 #define CONFIG_NS16550_MIN_FUNCTIONS
 421 #endif
 422
 423 #define CONFIG_SERIAL_MULTI     1 /* Enable both serial ports */
 424 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 425
 426 #define CONFIG_SYS_BAUDRATE_TABLE       \
 427         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 428
 429 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 430 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 431 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700)
 432 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800)
 433
 434 /* Use the HUSH parser */
 435 #define CONFIG_SYS_HUSH_PARSER    /* hush parser */
 436 #ifdef  CONFIG_SYS_HUSH_PARSER
 437 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 438 #endif
 439
 440 /*
 441  * Pass open firmware flat tree
 442  */
 443 #define CONFIG_OF_LIBFDT
 444 #define CONFIG_OF_BOARD_SETUP
 445 #define CONFIG_OF_STDOUT_VIA_ALIAS
 446
 447 /* new uImage format support */
 448 #define CONFIG_FIT
 449 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 450
 451 #define CONFIG_SYS_I2C
 452 #define CONFIG_SYS_I2C_FSL
 453 #define CONFIG_SYS_FSL_I2C_SPEED        400800 /* I2C speed and slave address*/
 454 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 455 #define CONFIG_SYS_FSL_I2C2_SPEED       400800 /* I2C speed and slave address*/
 456 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 457 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 458 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 459
 460 /* I2C EEPROM */
 461 #define CONFIG_ID_EEPROM
 462 #ifdef CONFIG_ID_EEPROM
 463 #define CONFIG_SYS_I2C_EEPROM_NXID
 464 #endif
 465 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 466 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 467 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 468
 469 /* enable read and write access to EEPROM */
 470 #define CONFIG_CMD_EEPROM
 471 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 472 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 473 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 474 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 475
 476 /* I2C FPGA */
 477 #define CONFIG_I2C_FPGA
 478 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 479
 480 #define CONFIG_RTC_DS3231
 481 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 482
 483 /*
 484  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 485  * used for SLIC
 486  */
 487 /* eSPI - Enhanced SPI */
 488 #define CONFIG_FSL_ESPI  /* SPI */
 489 #ifdef CONFIG_FSL_ESPI
 490 #define CONFIG_SPI_FLASH
 491 #define CONFIG_SPI_FLASH_SPANSION
 492 #define CONFIG_CMD_SF
 493 #define CONFIG_SF_DEFAULT_SPEED         10000000
 494 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 495 #endif
 496
 497 #if defined(CONFIG_TSEC_ENET)
 498
 499 #define CONFIG_MII                      /* MII PHY management */
 500 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 501 #define CONFIG_TSEC1    1
 502 #define CONFIG_TSEC1_NAME       "eTSEC1"
 503 #define CONFIG_TSEC2    1
 504 #define CONFIG_TSEC2_NAME       "eTSEC2"
 505
 506 #define TSEC1_PHY_ADDR          0
 507 #define TSEC2_PHY_ADDR          1
 508
 509 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 510 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 511
 512 #define TSEC1_PHYIDX            0
 513 #define TSEC2_PHYIDX            0
 514
 515 #define CONFIG_ETHPRIME         "eTSEC1"
 516
 517 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 518
 519 /* TBI PHY configuration for SGMII mode */
 520 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 521                 TBICR_PHY_RESET \
 522                 | TBICR_ANEG_ENABLE \
 523                 | TBICR_FULL_DUPLEX \
 524                 | TBICR_SPEED1_SET \
 525                 )
 526
 527 #endif  /* CONFIG_TSEC_ENET */
 528
 529 #define CONFIG_MMC
 530 #ifdef CONFIG_MMC
 531 #define CONFIG_CMD_MMC
 532 #define CONFIG_DOS_PARTITION
 533 #define CONFIG_FSL_ESDHC
 534 #define CONFIG_GENERIC_MMC
 535 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 536 #endif
 537
 538 #define CONFIG_USB_EHCI  /* USB */
 539 #ifdef CONFIG_USB_EHCI
 540 #define CONFIG_CMD_USB
 541 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 542 #define CONFIG_USB_EHCI_FSL
 543 #define CONFIG_USB_STORAGE
 544 #define CONFIG_HAS_FSL_DR_USB
 545 #endif
 546
 547 /*
 548  * Environment
 549  */
 550 #if defined(CONFIG_RAMBOOT_SDCARD)
 551 #define CONFIG_ENV_IS_IN_MMC
 552 #define CONFIG_FSL_FIXED_MMC_LOCATION
 553 #define CONFIG_SYS_MMC_ENV_DEV          0
 554 #define CONFIG_ENV_SIZE                 0x2000
 555 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 556 #define CONFIG_ENV_IS_IN_SPI_FLASH
 557 #define CONFIG_ENV_SPI_BUS      0
 558 #define CONFIG_ENV_SPI_CS       0
 559 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 560 #define CONFIG_ENV_SPI_MODE     0
 561 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 562 #define CONFIG_ENV_SECT_SIZE    0x10000
 563 #define CONFIG_ENV_SIZE         0x2000
 564 #elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 565 #define CONFIG_ENV_IS_IN_NAND
 566 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 567 #define CONFIG_ENV_OFFSET       ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 568 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 569 #elif defined(CONFIG_SYS_RAMBOOT)
 570 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 571 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 572 #define CONFIG_ENV_SIZE                 0x2000
 573 #else
 574 #define CONFIG_ENV_IS_IN_FLASH
 575 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 576 #define CONFIG_ENV_SIZE         0x2000
 577 #define CONFIG_ENV_SECT_SIZE    0x20000
 578 #endif
 579
 580 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 581 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 582
 583 /*
 584  * Command line configuration.
 585  */
 586 #include <config_cmd_default.h>
 587
 588 #define CONFIG_CMD_DATE
 589 #define CONFIG_CMD_DHCP
 590 #define CONFIG_CMD_ELF
 591 #define CONFIG_CMD_ERRATA
 592 #define CONFIG_CMD_I2C
 593 #define CONFIG_CMD_IRQ
 594 #define CONFIG_CMD_MII
 595 #define CONFIG_CMD_PING
 596 #define CONFIG_CMD_SETEXPR
 597 #define CONFIG_CMD_REGINFO
 598
 599 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 600 #define CONFIG_CMD_EXT2
 601 #define CONFIG_CMD_FAT
 602 #define CONFIG_DOS_PARTITION
 603 #endif
 604
 605 /* Hash command with SHA acceleration supported in hardware */
 606 #ifdef CONFIG_FSL_CAAM
 607 #define CONFIG_CMD_HASH
 608 #define CONFIG_SHA_HW_ACCEL
 609 #endif
 610
 611 /*
 612  * Miscellaneous configurable options
 613  */
 614 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 615 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 616 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 617 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 618
 619 #if defined(CONFIG_CMD_KGDB)
 620 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 621 #else
 622 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 623 #endif
 624 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 625                                                 /* Print Buffer Size */
 626 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 627 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 628
 629
 630 /*
 631  * For booting Linux, the board info and command line data
 632  * have to be in the first 64 MB of memory, since this is
 633  * the maximum mapped by the Linux kernel during initialization.
 634  */
 635 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 636 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 637
 638 #if defined(CONFIG_CMD_KGDB)
 639 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 640 #endif
 641
 642 /*
 643  * Dynamic MTD Partition support with mtdparts
 644  */
 645 #ifndef CONFIG_SYS_NO_FLASH
 646 #define CONFIG_MTD_DEVICE
 647 #define CONFIG_MTD_PARTITIONS
 648 #define CONFIG_CMD_MTDPARTS
 649 #define CONFIG_FLASH_CFI_MTD
 650 #define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash,"
 651 #define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \
 652                         "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \
 653                         "8m(kernel),512k(dtb),-(fs)"
 654 #endif
 655 /*
 656  * Override partitions in device tree using info
 657  * in "mtdparts" environment variable
 658  */
 659 #ifdef CONFIG_CMD_MTDPARTS
 660 #define CONFIG_FDT_FIXUP_PARTITIONS
 661 #endif
 662
 663 /*
 664  * Environment Configuration
 665  */
 666
 667 #if defined(CONFIG_TSEC_ENET)
 668 #define CONFIG_HAS_ETH0
 669 #define CONFIG_HAS_ETH1
 670 #endif
 671
 672 #define CONFIG_HOSTNAME         BSC9132qds
 673 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 674 #define CONFIG_BOOTFILE         "uImage"
 675 #define CONFIG_UBOOTPATH        "u-boot.bin"
 676
 677 #define CONFIG_BAUDRATE         115200
 678
 679 #ifdef CONFIG_SDCARD
 680 #define CONFIG_DEF_HWCONFIG     "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 681 #else
 682 #define CONFIG_DEF_HWCONFIG     "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0"
 683 #endif
 684
 685 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 686         "netdev=eth0\0"                                         \
 687         "uboot=" CONFIG_UBOOTPATH "\0"                          \
 688         "loadaddr=1000000\0"                    \
 689         "bootfile=uImage\0"     \
 690         "consoledev=ttyS0\0"                            \
 691         "ramdiskaddr=2000000\0"                 \
 692         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 693         "fdtaddr=c00000\0"                              \
 694         "fdtfile=bsc9132qds.dtb\0"              \
 695         "bdev=sda1\0"   \
 696         CONFIG_DEF_HWCONFIG\
 697         "othbootargs=mem=880M ramdisk_size=600000 " \
 698                 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \
 699                 "isolcpus=0\0" \
 700         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 701                 "console=$consoledev,$baudrate $othbootargs; "  \
 702                 "usb start;"                    \
 703                 "ext2load usb 0:4 $loadaddr $bootfile;"         \
 704                 "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 705                 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 706                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 707         "debug_halt_off=mw ff7e0e30 0xf0000000;"
 708
 709 #define CONFIG_NFSBOOTCOMMAND   \
 710         "setenv bootargs root=/dev/nfs rw "     \
 711         "nfsroot=$serverip:$rootpath "  \
 712         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 713         "console=$consoledev,$baudrate $othbootargs;" \
 714         "tftp $loadaddr $bootfile;"     \
 715         "tftp $fdtaddr $fdtfile;"       \
 716         "bootm $loadaddr - $fdtaddr"
 717
 718 #define CONFIG_HDBOOT   \
 719         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 720         "console=$consoledev,$baudrate $othbootargs;" \
 721         "usb start;"    \
 722         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 723         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 724         "bootm $loadaddr - $fdtaddr"
 725
 726 #define CONFIG_RAMBOOTCOMMAND           \
 727         "setenv bootargs root=/dev/ram rw "     \
 728         "console=$consoledev,$baudrate $othbootargs; "  \
 729         "tftp $ramdiskaddr $ramdiskfile;"       \
 730         "tftp $loadaddr $bootfile;"             \
 731         "tftp $fdtaddr $fdtfile;"               \
 732         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 733
 734 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 735
 736 #include <asm/fsl_secure_boot.h>
 737
 738 #ifdef CONFIG_SECURE_BOOT
 739 #define CONFIG_CMD_BLOB
 740 #endif
 741
 742 #endif  /* __CONFIG_H */