include/configs/BSC9132QDS.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * BSC9132 QDS board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #ifdef CONFIG_BSC9132QDS
  15 #define CONFIG_BSC9132
  16 #endif
  17
  18 #define CONFIG_MISC_INIT_R
  19
  20 #ifdef CONFIG_SDCARD
  21 #define CONFIG_RAMBOOT_SDCARD
  22 #define CONFIG_SYS_RAMBOOT
  23 #define CONFIG_SYS_EXTRA_ENV_RELOC
  24 #define CONFIG_SYS_TEXT_BASE            0x11000000
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  26 #endif
  27 #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769      1
  28 #ifdef CONFIG_SPIFLASH
  29 #define CONFIG_RAMBOOT_SPIFLASH
  30 #define CONFIG_SYS_RAMBOOT
  31 #define CONFIG_SYS_EXTRA_ENV_RELOC
  32 #define CONFIG_SYS_TEXT_BASE            0x11000000
  33 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  34 #endif
  35 #ifdef CONFIG_NAND_SECBOOT
  36 #define CONFIG_RAMBOOT_NAND
  37 #define CONFIG_SYS_RAMBOOT
  38 #define CONFIG_SYS_EXTRA_ENV_RELOC
  39 #define CONFIG_SYS_TEXT_BASE            0x11000000
  40 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  41 #endif
  42
  43 #ifdef CONFIG_NAND
  44 #define CONFIG_SPL_INIT_MINIMAL
  45 #define CONFIG_SPL_NAND_BOOT
  46 #define CONFIG_SPL_FLUSH_IMAGE
  47 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  48
  49 #define CONFIG_SYS_TEXT_BASE            0x00201000
  50 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  51 #define CONFIG_SPL_MAX_SIZE             8192
  52 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  53 #define CONFIG_SPL_RELOC_STACK          0x00100000
  54 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  55 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  56 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  57 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  58 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  59 #endif
  60
  61 #ifndef CONFIG_SYS_TEXT_BASE
  62 #define CONFIG_SYS_TEXT_BASE            0x8ff40000
  63 #endif
  64
  65 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  66 #define CONFIG_RESET_VECTOR_ADDRESS     0x8ffffffc
  67 #endif
  68
  69 #ifdef CONFIG_SPL_BUILD
  70 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  71 #else
  72 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  73 #endif
  74
  75 /* High Level Configuration Options */
  76 #define CONFIG_BOOKE                    /* BOOKE */
  77 #define CONFIG_E500                     /* BOOKE e500 family */
  78 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  79 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  80 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
  81
  82 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  83 #if defined(CONFIG_PCI)
  84 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
  85 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  86 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  87 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
  88 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  89
  90 #define CONFIG_CMD_PCI
  91
  92 /*
  93  * PCI Windows
  94  * Memory space is mapped 1-1, but I/O space must start from 0.
  95  */
  96 /* controller 1, Slot 1, tgtid 1, Base address a000 */
  97 #define CONFIG_SYS_PCIE1_NAME           "PCIe Slot"
  98 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
  99 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
 100 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
 101 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 102 #define CONFIG_SYS_PCIE1_IO_VIRT        0xC0010000
 103 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 104 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 105 #define CONFIG_SYS_PCIE1_IO_PHYS        0xC0010000
 106
 107 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 108
 109 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 110 #define CONFIG_DOS_PARTITION
 111 #endif
 112
 113 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 114 #define CONFIG_ENV_OVERWRITE
 115 #define CONFIG_TSEC_ENET /* ethernet */
 116
 117 #if defined(CONFIG_SYS_CLK_100_DDR_100)
 118 #define CONFIG_SYS_CLK_FREQ     100000000
 119 #define CONFIG_DDR_CLK_FREQ     100000000
 120 #elif defined(CONFIG_SYS_CLK_100_DDR_133)
 121 #define CONFIG_SYS_CLK_FREQ     100000000
 122 #define CONFIG_DDR_CLK_FREQ     133000000
 123 #endif
 124
 125 #define CONFIG_MP
 126
 127 #define CONFIG_HWCONFIG
 128 /*
 129  * These can be toggled for performance analysis, otherwise use default.
 130  */
 131 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 132 #define CONFIG_BTB                      /* enable branch predition */
 133
 134 #define CONFIG_SYS_MEMTEST_START        0x01000000      /* memtest works on */
 135 #define CONFIG_SYS_MEMTEST_END          0x01ffffff
 136
 137 /* DDR Setup */
 138 #define CONFIG_SYS_FSL_DDR3
 139 #define CONFIG_SYS_SPD_BUS_NUM          0
 140 #define SPD_EEPROM_ADDRESS1             0x54 /* I2C access */
 141 #define SPD_EEPROM_ADDRESS2             0x56 /* I2C access */
 142 #define CONFIG_FSL_DDR_INTERACTIVE
 143
 144 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 145
 146 #define CONFIG_SYS_SDRAM_SIZE           (1024)
 147 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 148 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 149
 150 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 151
 152 /* DDR3 Controller Settings */
 153 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 154 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 155 #define CONFIG_SYS_DDR_CS0_CONFIG_1333  0x80004302
 156 #define CONFIG_SYS_DDR_CS0_CONFIG_800   0x80014302
 157 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 158 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 159 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 160 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 161 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 162 #define CONFIG_SYS_DDR1_CS0_BNDS       0x0040007F
 163
 164 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 165 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 166 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 167 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 168 #define CONFIG_SYS_DDR_CONTROL_800              0x470C0000
 169 #define CONFIG_SYS_DDR_CONTROL_2_800    0x04401050
 170 #define CONFIG_SYS_DDR_TIMING_4_800             0x00220001
 171 #define CONFIG_SYS_DDR_TIMING_5_800             0x03402400
 172
 173 #define CONFIG_SYS_DDR_CONTROL_1333             0x470C0008
 174 #define CONFIG_SYS_DDR_CONTROL_2_1333   0x24401010
 175 #define CONFIG_SYS_DDR_TIMING_4_1333            0x00000001
 176 #define CONFIG_SYS_DDR_TIMING_5_1333            0x03401400
 177
 178 #define CONFIG_SYS_DDR_TIMING_3_800             0x00020000
 179 #define CONFIG_SYS_DDR_TIMING_0_800             0x00330004
 180 #define CONFIG_SYS_DDR_TIMING_1_800             0x6f6B4846
 181 #define CONFIG_SYS_DDR_TIMING_2_800             0x0FA8C8CF
 182 #define CONFIG_SYS_DDR_CLK_CTRL_800             0x03000000
 183 #define CONFIG_SYS_DDR_MODE_1_800               0x40461520
 184 #define CONFIG_SYS_DDR_MODE_2_800               0x8000c000
 185 #define CONFIG_SYS_DDR_INTERVAL_800             0x0C300000
 186 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800        0x8655A608
 187
 188 #define CONFIG_SYS_DDR_TIMING_3_1333            0x01061000
 189 #define CONFIG_SYS_DDR_TIMING_0_1333            0x00440104
 190 #define CONFIG_SYS_DDR_TIMING_1_1333            0x98913A45
 191 #define CONFIG_SYS_DDR_TIMING_2_1333            0x0FB8B114
 192 #define CONFIG_SYS_DDR_CLK_CTRL_1333            0x02800000
 193 #define CONFIG_SYS_DDR_MODE_1_1333              0x00061A50
 194 #define CONFIG_SYS_DDR_MODE_2_1333              0x00100000
 195 #define CONFIG_SYS_DDR_INTERVAL_1333            0x144E0513
 196 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333       0x8655F607
 197
 198 /*FIXME: the following params are constant w.r.t diff freq
 199 combinations. this should be removed later
 200 */
 201 #if CONFIG_DDR_CLK_FREQ == 100000000
 202 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 203 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 204 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800
 205 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 206 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 207 #elif CONFIG_DDR_CLK_FREQ == 133000000
 208 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333
 209 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_1333
 210 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_1333
 211 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333
 212 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333
 213 #else
 214 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 215 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 216 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_800
 217 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 218 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 219 #endif
 220
 221 /* relocated CCSRBAR */
 222 #define CONFIG_SYS_CCSRBAR      CONFIG_SYS_CCSRBAR_DEFAULT
 223 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR_DEFAULT
 224
 225 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR
 226
 227 /* DSP CCSRBAR */
 228 #define CONFIG_SYS_FSL_DSP_CCSRBAR      CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 229 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 230
 231 /*
 232  * IFC Definitions
 233  */
 234 /* NOR Flash on IFC */
 235
 236 #ifdef CONFIG_SPL_BUILD
 237 #define CONFIG_SYS_NO_FLASH
 238 #endif
 239 #define CONFIG_SYS_FLASH_BASE           0x88000000
 240 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* Max number of sector: 32M */
 241
 242 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 243
 244 #define CONFIG_SYS_NOR_CSPR     0x88000101
 245 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 246 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(5)
 247 /* NOR Flash Timing Params */
 248
 249 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) \
 250                                 | FTIM0_NOR_TEADC(0x03) \
 251                                 | FTIM0_NOR_TAVDS(0x00) \
 252                                 | FTIM0_NOR_TEAHC(0x0f))
 253 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1d) \
 254                                 | FTIM1_NOR_TRAD_NOR(0x09) \
 255                                 | FTIM1_NOR_TSEQRAD_NOR(0x09))
 256 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x1) \
 257                                 | FTIM2_NOR_TCH(0x4) \
 258                                 | FTIM2_NOR_TWPH(0x7) \
 259                                 | FTIM2_NOR_TWP(0x1e))
 260 #define CONFIG_SYS_NOR_FTIM3    0x0
 261
 262 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 263 #define CONFIG_SYS_FLASH_QUIET_TEST
 264 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 265 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 266
 267 #undef CONFIG_SYS_FLASH_CHECKSUM
 268 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 269 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 270
 271 /* CFI for NOR Flash */
 272 #define CONFIG_FLASH_CFI_DRIVER
 273 #define CONFIG_SYS_FLASH_CFI
 274 #define CONFIG_SYS_FLASH_EMPTY_INFO
 275 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 276
 277 /* NAND Flash on IFC */
 278 #define CONFIG_SYS_NAND_BASE            0xff800000
 279 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 280
 281 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 282                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 283                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 284                                 | CSPR_V)
 285 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 286
 287 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 288                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 289                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 290                                 | CSOR_NAND_RAL_2       /* RAL = 2Byes */ \
 291                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 292                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 293                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 294
 295 /* NAND Flash Timing Params */
 296 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x03) \
 297                                         | FTIM0_NAND_TWP(0x05) \
 298                                         | FTIM0_NAND_TWCHT(0x02) \
 299                                         | FTIM0_NAND_TWH(0x04))
 300 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x1c) \
 301                                         | FTIM1_NAND_TWBE(0x1e) \
 302                                         | FTIM1_NAND_TRR(0x07) \
 303                                         | FTIM1_NAND_TRP(0x05))
 304 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x08) \
 305                                         | FTIM2_NAND_TREH(0x04) \
 306                                         | FTIM2_NAND_TWHRE(0x11))
 307 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 308
 309 #define CONFIG_SYS_NAND_DDR_LAW         11
 310
 311 /* NAND */
 312 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 313 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 314 #define CONFIG_CMD_NAND
 315
 316 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 317
 318 #ifndef CONFIG_SPL_BUILD
 319 #define CONFIG_FSL_QIXIS
 320 #endif
 321 #ifdef CONFIG_FSL_QIXIS
 322 #define CONFIG_SYS_FPGA_BASE    0xffb00000
 323 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 324 #define QIXIS_BASE      CONFIG_SYS_FPGA_BASE
 325 #define QIXIS_LBMAP_SWITCH      9
 326 #define QIXIS_LBMAP_MASK        0x07
 327 #define QIXIS_LBMAP_SHIFT       0
 328 #define QIXIS_LBMAP_DFLTBANK            0x00
 329 #define QIXIS_LBMAP_ALTBANK             0x04
 330 #define QIXIS_RST_CTL_RESET             0x83
 331 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 332 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 333 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 334
 335 #define CONFIG_SYS_FPGA_BASE_PHYS       CONFIG_SYS_FPGA_BASE
 336
 337 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \
 338                                         | CSPR_PORT_SIZE_8 \
 339                                         | CSPR_MSEL_GPCM \
 340                                         | CSPR_V)
 341 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 342 #define CONFIG_SYS_CSOR2                0x0
 343 /* CPLD Timing parameters for IFC CS3 */
 344 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 345                                         FTIM0_GPCM_TEADC(0x0e) | \
 346                                         FTIM0_GPCM_TEAHC(0x0e))
 347 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 348                                         FTIM1_GPCM_TRAD(0x1f))
 349 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 350                                         FTIM2_GPCM_TCH(0x8) | \
 351                                         FTIM2_GPCM_TWP(0x1f))
 352 #define CONFIG_SYS_CS2_FTIM3            0x0
 353 #endif
 354
 355 /* Set up IFC registers for boot location NOR/NAND */
 356 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 357 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 358 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 359 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 360 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 361 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 362 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 363 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 364 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 365 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 366 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 367 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 368 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 369 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 370 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 371 #else
 372 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 373 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 374 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 375 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 376 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 377 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 378 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 379 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 380 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 381 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 382 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 383 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 384 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 385 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 386 #endif
 387
 388 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 389 #define CONFIG_BOARD_EARLY_INIT_R
 390
 391 #define CONFIG_SYS_INIT_RAM_LOCK
 392 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 393 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 394
 395 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 396                                                 - GENERATED_GBL_DATA_SIZE)
 397 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 398
 399 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 400 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 401
 402 /* Serial Port */
 403 #define CONFIG_CONS_INDEX       1
 404 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 405 #define CONFIG_SYS_NS16550_SERIAL
 406 #define CONFIG_SYS_NS16550_REG_SIZE     1
 407 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 408 #ifdef CONFIG_SPL_BUILD
 409 #define CONFIG_NS16550_MIN_FUNCTIONS
 410 #endif
 411
 412 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 413
 414 #define CONFIG_SYS_BAUDRATE_TABLE       \
 415         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 416
 417 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 418 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 419 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700)
 420 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800)
 421
 422 #define CONFIG_SYS_I2C
 423 #define CONFIG_SYS_I2C_FSL
 424 #define CONFIG_SYS_FSL_I2C_SPEED        400800 /* I2C speed and slave address*/
 425 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 426 #define CONFIG_SYS_FSL_I2C2_SPEED       400800 /* I2C speed and slave address*/
 427 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 428 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 429 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 430
 431 /* I2C EEPROM */
 432 #define CONFIG_ID_EEPROM
 433 #ifdef CONFIG_ID_EEPROM
 434 #define CONFIG_SYS_I2C_EEPROM_NXID
 435 #endif
 436 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 437 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 438 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 439
 440 /* enable read and write access to EEPROM */
 441 #define CONFIG_CMD_EEPROM
 442 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 443 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 444 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 445
 446 /* I2C FPGA */
 447 #define CONFIG_I2C_FPGA
 448 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 449
 450 #define CONFIG_RTC_DS3231
 451 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 452
 453 /*
 454  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 455  * used for SLIC
 456  */
 457 /* eSPI - Enhanced SPI */
 458 #ifdef CONFIG_FSL_ESPI
 459 #define CONFIG_SF_DEFAULT_SPEED         10000000
 460 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 461 #endif
 462
 463 #if defined(CONFIG_TSEC_ENET)
 464
 465 #define CONFIG_MII                      /* MII PHY management */
 466 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 467 #define CONFIG_TSEC1    1
 468 #define CONFIG_TSEC1_NAME       "eTSEC1"
 469 #define CONFIG_TSEC2    1
 470 #define CONFIG_TSEC2_NAME       "eTSEC2"
 471
 472 #define TSEC1_PHY_ADDR          0
 473 #define TSEC2_PHY_ADDR          1
 474
 475 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 476 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 477
 478 #define TSEC1_PHYIDX            0
 479 #define TSEC2_PHYIDX            0
 480
 481 #define CONFIG_ETHPRIME         "eTSEC1"
 482
 483 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 484
 485 /* TBI PHY configuration for SGMII mode */
 486 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 487                 TBICR_PHY_RESET \
 488                 | TBICR_ANEG_ENABLE \
 489                 | TBICR_FULL_DUPLEX \
 490                 | TBICR_SPEED1_SET \
 491                 )
 492
 493 #endif  /* CONFIG_TSEC_ENET */
 494
 495 #define CONFIG_MMC
 496 #ifdef CONFIG_MMC
 497 #define CONFIG_DOS_PARTITION
 498 #define CONFIG_FSL_ESDHC
 499 #define CONFIG_GENERIC_MMC
 500 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 501 #endif
 502
 503 #define CONFIG_USB_EHCI  /* USB */
 504 #ifdef CONFIG_USB_EHCI
 505 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 506 #define CONFIG_USB_EHCI_FSL
 507 #define CONFIG_HAS_FSL_DR_USB
 508 #endif
 509
 510 /*
 511  * Environment
 512  */
 513 #if defined(CONFIG_RAMBOOT_SDCARD)
 514 #define CONFIG_ENV_IS_IN_MMC
 515 #define CONFIG_FSL_FIXED_MMC_LOCATION
 516 #define CONFIG_SYS_MMC_ENV_DEV          0
 517 #define CONFIG_ENV_SIZE                 0x2000
 518 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 519 #define CONFIG_ENV_IS_IN_SPI_FLASH
 520 #define CONFIG_ENV_SPI_BUS      0
 521 #define CONFIG_ENV_SPI_CS       0
 522 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 523 #define CONFIG_ENV_SPI_MODE     0
 524 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 525 #define CONFIG_ENV_SECT_SIZE    0x10000
 526 #define CONFIG_ENV_SIZE         0x2000
 527 #elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 528 #define CONFIG_ENV_IS_IN_NAND
 529 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 530 #define CONFIG_ENV_OFFSET       ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 531 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 532 #elif defined(CONFIG_SYS_RAMBOOT)
 533 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 534 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 535 #define CONFIG_ENV_SIZE                 0x2000
 536 #else
 537 #define CONFIG_ENV_IS_IN_FLASH
 538 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 539 #define CONFIG_ENV_SIZE         0x2000
 540 #define CONFIG_ENV_SECT_SIZE    0x20000
 541 #endif
 542
 543 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 544 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 545
 546 /*
 547  * Command line configuration.
 548  */
 549 #define CONFIG_CMD_DATE
 550 #define CONFIG_CMD_ERRATA
 551 #define CONFIG_CMD_IRQ
 552 #define CONFIG_CMD_REGINFO
 553
 554 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 555 #define CONFIG_DOS_PARTITION
 556 #endif
 557
 558 /* Hash command with SHA acceleration supported in hardware */
 559 #ifdef CONFIG_FSL_CAAM
 560 #define CONFIG_CMD_HASH
 561 #define CONFIG_SHA_HW_ACCEL
 562 #endif
 563
 564 /*
 565  * Miscellaneous configurable options
 566  */
 567 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 568 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 569 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 570 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 571
 572 #if defined(CONFIG_CMD_KGDB)
 573 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 574 #else
 575 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 576 #endif
 577 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 578                                                 /* Print Buffer Size */
 579 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 580 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 581
 582 /*
 583  * For booting Linux, the board info and command line data
 584  * have to be in the first 64 MB of memory, since this is
 585  * the maximum mapped by the Linux kernel during initialization.
 586  */
 587 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 588 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 589
 590 #if defined(CONFIG_CMD_KGDB)
 591 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 592 #endif
 593
 594 /*
 595  * Dynamic MTD Partition support with mtdparts
 596  */
 597 #ifndef CONFIG_SYS_NO_FLASH
 598 #define CONFIG_MTD_DEVICE
 599 #define CONFIG_MTD_PARTITIONS
 600 #define CONFIG_CMD_MTDPARTS
 601 #define CONFIG_FLASH_CFI_MTD
 602 #define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash,"
 603 #define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \
 604                         "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \
 605                         "8m(kernel),512k(dtb),-(fs)"
 606 #endif
 607 /*
 608  * Override partitions in device tree using info
 609  * in "mtdparts" environment variable
 610  */
 611 #ifdef CONFIG_CMD_MTDPARTS
 612 #define CONFIG_FDT_FIXUP_PARTITIONS
 613 #endif
 614
 615 /*
 616  * Environment Configuration
 617  */
 618
 619 #if defined(CONFIG_TSEC_ENET)
 620 #define CONFIG_HAS_ETH0
 621 #define CONFIG_HAS_ETH1
 622 #endif
 623
 624 #define CONFIG_HOSTNAME         BSC9132qds
 625 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 626 #define CONFIG_BOOTFILE         "uImage"
 627 #define CONFIG_UBOOTPATH        "u-boot.bin"
 628
 629 #define CONFIG_BAUDRATE         115200
 630
 631 #ifdef CONFIG_SDCARD
 632 #define CONFIG_DEF_HWCONFIG     "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 633 #else
 634 #define CONFIG_DEF_HWCONFIG     "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0"
 635 #endif
 636
 637 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 638         "netdev=eth0\0"                                         \
 639         "uboot=" CONFIG_UBOOTPATH "\0"                          \
 640         "loadaddr=1000000\0"                    \
 641         "bootfile=uImage\0"     \
 642         "consoledev=ttyS0\0"                            \
 643         "ramdiskaddr=2000000\0"                 \
 644         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 645         "fdtaddr=1e00000\0"                             \
 646         "fdtfile=bsc9132qds.dtb\0"              \
 647         "bdev=sda1\0"   \
 648         CONFIG_DEF_HWCONFIG\
 649         "othbootargs=mem=880M ramdisk_size=600000 " \
 650                 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \
 651                 "isolcpus=0\0" \
 652         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 653                 "console=$consoledev,$baudrate $othbootargs; "  \
 654                 "usb start;"                    \
 655                 "ext2load usb 0:4 $loadaddr $bootfile;"         \
 656                 "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 657                 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 658                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 659         "debug_halt_off=mw ff7e0e30 0xf0000000;"
 660
 661 #define CONFIG_NFSBOOTCOMMAND   \
 662         "setenv bootargs root=/dev/nfs rw "     \
 663         "nfsroot=$serverip:$rootpath "  \
 664         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 665         "console=$consoledev,$baudrate $othbootargs;" \
 666         "tftp $loadaddr $bootfile;"     \
 667         "tftp $fdtaddr $fdtfile;"       \
 668         "bootm $loadaddr - $fdtaddr"
 669
 670 #define CONFIG_HDBOOT   \
 671         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 672         "console=$consoledev,$baudrate $othbootargs;" \
 673         "usb start;"    \
 674         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 675         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 676         "bootm $loadaddr - $fdtaddr"
 677
 678 #define CONFIG_RAMBOOTCOMMAND           \
 679         "setenv bootargs root=/dev/ram rw "     \
 680         "console=$consoledev,$baudrate $othbootargs; "  \
 681         "tftp $ramdiskaddr $ramdiskfile;"       \
 682         "tftp $loadaddr $bootfile;"             \
 683         "tftp $fdtaddr $fdtfile;"               \
 684         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 685
 686 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 687
 688 #include <asm/fsl_secure_boot.h>
 689
 690 #endif  /* __CONFIG_H */