include/configs/CPCI4052.h

   1 /*
   2  * (C) Copyright 2001-2004
   3  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_405GP            1       /* This is a PPC405 CPU         */
  37 #define CONFIG_4xx              1       /* ...member of PPC4xx family   */
  38 #define CONFIG_CPCI405          1       /* ...on a CPCI405 board        */
  39 #define CONFIG_CPCI405_VER2     1       /* ...version 2                 */
  40 #undef  CONFIG_CPCI405_6U               /* enable this for 6U boards    */
  41
  42 #define CONFIG_SYS_TEXT_BASE    0xFFFC0000
  43
  44 #define CONFIG_BOARD_EARLY_INIT_F 1     /* call board_early_init_f()    */
  45 #define CONFIG_MISC_INIT_R       1      /* call misc_init_r()           */
  46
  47 #define CONFIG_SYS_CLK_FREQ     33330000 /* external frequency to pll   */
  48
  49 #define CONFIG_BAUDRATE         9600
  50 #define CONFIG_BOOTDELAY        3       /* autoboot after 3 seconds     */
  51
  52 #undef  CONFIG_BOOTARGS
  53 #undef  CONFIG_BOOTCOMMAND
  54
  55 #define CONFIG_PREBOOT                  /* enable preboot variable      */
  56
  57 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  58 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change        */
  59
  60 #define CONFIG_PPC4xx_EMAC
  61 #define CONFIG_MII              1       /* MII PHY management           */
  62 #define CONFIG_PHY_ADDR         0       /* PHY address                  */
  63 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
  64 #define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
  65
  66 #undef  CONFIG_HAS_ETH1
  67
  68 #define CONFIG_RTC_M48T35A      1               /* ST Electronics M48 timekeeper */
  69
  70 /*
  71  * BOOTP options
  72  */
  73 #define CONFIG_BOOTP_SUBNETMASK
  74 #define CONFIG_BOOTP_GATEWAY
  75 #define CONFIG_BOOTP_HOSTNAME
  76 #define CONFIG_BOOTP_BOOTPATH
  77 #define CONFIG_BOOTP_DNS
  78 #define CONFIG_BOOTP_DNS2
  79 #define CONFIG_BOOTP_SEND_HOSTNAME
  80
  81
  82 /*
  83  * Command line configuration.
  84  */
  85 #include <config_cmd_default.h>
  86
  87 #define CONFIG_CMD_DHCP
  88 #define CONFIG_CMD_PCI
  89 #define CONFIG_CMD_IRQ
  90 #define CONFIG_CMD_IDE
  91 #define CONFIG_CMD_FAT
  92 #define CONFIG_CMD_ELF
  93 #define CONFIG_CMD_DATE
  94 #define CONFIG_CMD_I2C
  95 #define CONFIG_CMD_MII
  96 #define CONFIG_CMD_PING
  97 #define CONFIG_CMD_BSP
  98 #define CONFIG_CMD_EEPROM
  99
 100 #define CONFIG_MAC_PARTITION
 101 #define CONFIG_DOS_PARTITION
 102
 103 #define CONFIG_SUPPORT_VFAT
 104
 105 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
 106
 107 #define CONFIG_SDRAM_BANK0      1       /* init onboard SDRAM bank 0    */
 108
 109 /*
 110  * Miscellaneous configurable options
 111  */
 112 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 113 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
 114
 115 #undef  CONFIG_SYS_HUSH_PARSER                  /* use "hush" command parser    */
 116
 117 #if defined(CONFIG_CMD_KGDB)
 118 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 119 #else
 120 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 121 #endif
 122 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 123 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 124 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 125
 126 #define CONFIG_SYS_DEVICE_NULLDEV       1       /* include nulldev device       */
 127
 128 #define CONFIG_SYS_CONSOLE_INFO_QUIET   1       /* don't print console @ startup*/
 129
 130 #define CONFIG_AUTO_COMPLETE    1       /* add autocompletion support   */
 131
 132 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 133 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 134
 135 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
 136 #define CONFIG_SYS_NS16550
 137 #define CONFIG_SYS_NS16550_SERIAL
 138 #define CONFIG_SYS_NS16550_REG_SIZE     1
 139 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 140
 141 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK            /* no external serial clock used */
 142 #define CONFIG_SYS_BASE_BAUD        691200
 143
 144 /* The following table includes the supported baudrates */
 145 #define CONFIG_SYS_BAUDRATE_TABLE       \
 146         { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 147          57600, 115200, 230400, 460800, 921600 }
 148
 149 #define CONFIG_SYS_LOAD_ADDR    0x100000        /* default load address */
 150 #define CONFIG_SYS_EXTBDINFO    1               /* To use extended board_into (bd_t) */
 151
 152 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
 153
 154 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 155
 156 #define CONFIG_LOOPW            1       /* enable loopw command         */
 157
 158 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 159
 160 #define CONFIG_VERSION_VARIABLE 1       /* include version env variable */
 161
 162 #define CONFIG_AUTOBOOT_KEYED   1
 163 #define CONFIG_AUTOBOOT_PROMPT  \
 164         "Press SPACE to abort autoboot in %d seconds\n", bootdelay
 165 #undef CONFIG_AUTOBOOT_DELAY_STR
 166 #define CONFIG_AUTOBOOT_STOP_STR " "
 167
 168 #define CONFIG_SYS_RX_ETH_BUFFER        16      /* use 16 rx buffer on 405 emac */
 169
 170 /*-----------------------------------------------------------------------
 171  * PCI stuff
 172  *-----------------------------------------------------------------------
 173  */
 174 #define PCI_HOST_ADAPTER 0              /* configure as pci adapter     */
 175 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 176 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 177
 178 #define CONFIG_PCI                      /* include pci support          */
 179 #define CONFIG_PCI_HOST PCI_HOST_AUTO   /* select pci host function     */
 180 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 181                                         /* resource configuration       */
 182
 183 #define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
 184
 185 #define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
 186
 187 #define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
 188
 189 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
 190 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
 191 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A    */
 192 #define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
 193 #define CONFIG_SYS_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
 194 #define CONFIG_SYS_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
 195 #define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 196 #define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
 197 #define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
 198 #define CONFIG_SYS_PCI_PTM2PCI (bd->bi_memsize) /* host use this pci address */
 199
 200 #define CONFIG_PCI_4xx_PTM_OVERWRITE    1 /* overwrite PTMx settings by env */
 201
 202 /*-----------------------------------------------------------------------
 203  * IDE/ATA stuff
 204  *-----------------------------------------------------------------------
 205  */
 206 #undef  CONFIG_IDE_8xx_DIRECT               /* no pcmcia interface required */
 207 #undef  CONFIG_IDE_LED                  /* no led for ide supported     */
 208 #define CONFIG_IDE_RESET        1       /* reset for ide supported      */
 209
 210 #define CONFIG_SYS_IDE_MAXBUS           1               /* max. 1 IDE busses    */
 211 #define CONFIG_SYS_IDE_MAXDEVICE        (CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 212
 213 #define CONFIG_SYS_ATA_BASE_ADDR        0xF0100000
 214 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 215
 216 #define CONFIG_SYS_ATA_DATA_OFFSET      0x0000  /* Offset for data I/O                  */
 217 #define CONFIG_SYS_ATA_REG_OFFSET       0x0000  /* Offset for normal register accesses  */
 218 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0000  /* Offset for alternate registers       */
 219
 220 /*-----------------------------------------------------------------------
 221  * Start addresses for the final memory configuration
 222  * (Set up by the startup code)
 223  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 224  */
 225 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 226 #define CONFIG_SYS_FLASH_BASE           0xFFFC0000
 227 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 228 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)    /* Reserve 256 kB for Monitor   */
 229 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024)    /* Reserve 128 kB for malloc()  */
 230
 231 #define CONFIG_PRAM             0       /* use pram variable to overwrite */
 232
 233 /*
 234  * For booting Linux, the board info and command line data
 235  * have to be in the first 8 MB of memory, since this is
 236  * the maximum mapped by the Linux kernel during initialization.
 237  */
 238 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 239
 240 #define CONFIG_OF_LIBFDT
 241 #define CONFIG_OF_BOARD_SETUP
 242
 243 /*-----------------------------------------------------------------------
 244  * FLASH organization
 245  */
 246 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks           */
 247 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip    */
 248
 249 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 250 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 251
 252 #define CONFIG_SYS_FLASH_WORD_SIZE      unsigned short  /* flash word size (width)      */
 253 #define CONFIG_SYS_FLASH_ADDR0          0x5555  /* 1st address for flash config cycles  */
 254 #define CONFIG_SYS_FLASH_ADDR1          0x2AAA  /* 2nd address for flash config cycles  */
 255 /*
 256  * The following defines are added for buggy IOP480 byte interface.
 257  * All other boards should use the standard values (CPCI405 etc.)
 258  */
 259 #define CONFIG_SYS_FLASH_READ0          0x0000  /* 0 is standard                        */
 260 #define CONFIG_SYS_FLASH_READ1          0x0001  /* 1 is standard                        */
 261 #define CONFIG_SYS_FLASH_READ2          0x0002  /* 2 is standard                        */
 262
 263 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
 264
 265 #if 0 /* Use NVRAM for environment variables */
 266 /*-----------------------------------------------------------------------
 267  * NVRAM organization
 268  */
 269 #define CONFIG_ENV_IS_IN_NVRAM  1       /* use NVRAM for environment vars       */
 270 #define CONFIG_ENV_SIZE         0x0ff8          /* Size of Environment vars     */
 271 #define CONFIG_ENV_ADDR         \
 272         (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-(CONFIG_ENV_SIZE+8))  /* Env  */
 273
 274 #else /* Use EEPROM for environment variables */
 275
 276 #define CONFIG_ENV_IS_IN_EEPROM 1       /* use EEPROM for environment vars */
 277 #define CONFIG_ENV_OFFSET               0x000   /* environment starts at the beginning of the EEPROM */
 278 #define CONFIG_ENV_SIZE         0x800   /* 2048 bytes may be used for env vars*/
 279                                    /* total size of a CAT24WC16 is 2048 bytes */
 280 #endif
 281
 282 #define CONFIG_SYS_NVRAM_BASE_ADDR      0xf0200000              /* NVRAM base address   */
 283 #define CONFIG_SYS_NVRAM_SIZE           (32*1024)               /* NVRAM size           */
 284 #define CONFIG_SYS_VXWORKS_MAC_PTR     (CONFIG_SYS_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
 285
 286 /*-----------------------------------------------------------------------
 287  * I2C EEPROM (CAT24WC16) for environment
 288  */
 289 #define CONFIG_HARD_I2C                 /* I2c with hardware support */
 290 #define CONFIG_PPC4XX_I2C               /* use PPC4xx driver            */
 291 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 292 #define CONFIG_SYS_I2C_SLAVE            0x7F
 293
 294 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* EEPROM CAT28WC08             */
 295 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1        /* Bytes of address             */
 296 /* mask of address bits that overflow into the "EEPROM chip address"    */
 297 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW     0x07
 298 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4     /* The Catalyst CAT24WC08 has   */
 299                                         /* 16 byte page write mode using*/
 300                                         /* last 4 bits of the address   */
 301 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10   /* and takes up to 10 msec */
 302
 303 /*
 304  * Init Memory Controller:
 305  *
 306  * BR0/1 and OR0/1 (FLASH)
 307  */
 308
 309 #define FLASH_BASE0_PRELIM      0xFF800000      /* FLASH bank #0        */
 310 #define FLASH_BASE1_PRELIM      0xFFC00000      /* FLASH bank #1        */
 311
 312 /*-----------------------------------------------------------------------
 313  * External Bus Controller (EBC) Setup
 314  */
 315
 316 /* Memory Bank 0 (Flash Bank 0) initialization                                  */
 317 #define CONFIG_SYS_EBC_PB0AP            0x92015480
 318 #define CONFIG_SYS_EBC_PB0CR            0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 319
 320 /* Memory Bank 1 (Flash Bank 1) initialization                                  */
 321 #define CONFIG_SYS_EBC_PB1AP            0x92015480
 322 #define CONFIG_SYS_EBC_PB1CR            0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 323
 324 /* Memory Bank 2 (CAN0, 1) initialization                                       */
 325 #define CONFIG_SYS_EBC_PB2AP            0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 326 #define CONFIG_SYS_EBC_PB2CR            0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 327 #define CONFIG_SYS_LED_ADDR             0xF0000380
 328
 329 /* Memory Bank 3 (CompactFlash IDE) initialization                              */
 330 #define CONFIG_SYS_EBC_PB3AP            0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 331 #define CONFIG_SYS_EBC_PB3CR            0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 332
 333 /* Memory Bank 4 (NVRAM/RTC) initialization                                     */
 334 /*#define CONFIG_SYS_EBC_PB4AP            0x01805280  / * TWT=3,WBN=1,WBF=1,TH=1,SOR=1     */
 335 #define CONFIG_SYS_EBC_PB4AP            0x01805680  /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1     */
 336 #define CONFIG_SYS_EBC_PB4CR            0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit  */
 337
 338 /* Memory Bank 5 (optional Quart) initialization                                */
 339 #define CONFIG_SYS_EBC_PB5AP            0x04005B80  /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
 340 #define CONFIG_SYS_EBC_PB5CR            0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit  */
 341
 342 /* Memory Bank 6 (FPGA internal) initialization                                 */
 343 #define CONFIG_SYS_EBC_PB6AP            0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 344 #define CONFIG_SYS_EBC_PB6CR            0xF041A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 345 #define CONFIG_SYS_FPGA_BASE_ADDR       0xF0400000
 346
 347 /*-----------------------------------------------------------------------
 348  * FPGA stuff
 349  */
 350 /* FPGA internal regs */
 351 #define CONFIG_SYS_FPGA_MODE            0x00
 352 #define CONFIG_SYS_FPGA_STATUS          0x02
 353 #define CONFIG_SYS_FPGA_TS              0x04
 354 #define CONFIG_SYS_FPGA_TS_LOW          0x06
 355 #define CONFIG_SYS_FPGA_TS_CAP0 0x10
 356 #define CONFIG_SYS_FPGA_TS_CAP0_LOW     0x12
 357 #define CONFIG_SYS_FPGA_TS_CAP1 0x14
 358 #define CONFIG_SYS_FPGA_TS_CAP1_LOW     0x16
 359 #define CONFIG_SYS_FPGA_TS_CAP2 0x18
 360 #define CONFIG_SYS_FPGA_TS_CAP2_LOW     0x1a
 361 #define CONFIG_SYS_FPGA_TS_CAP3 0x1c
 362 #define CONFIG_SYS_FPGA_TS_CAP3_LOW     0x1e
 363
 364 /* FPGA Mode Reg */
 365 #define CONFIG_SYS_FPGA_MODE_CF_RESET       0x0001
 366 #define CONFIG_SYS_FPGA_MODE_DUART_RESET   0x0002
 367 #define CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT 0x0004     /* only set on CPCI-405 Ver 3 */
 368 #define CONFIG_SYS_FPGA_MODE_TS_IRQ_ENABLE 0x0100
 369 #define CONFIG_SYS_FPGA_MODE_TS_IRQ_CLEAR  0x1000
 370 #define CONFIG_SYS_FPGA_MODE_TS_CLEAR       0x2000
 371
 372 /* FPGA Status Reg */
 373 #define CONFIG_SYS_FPGA_STATUS_DIP0     0x0001
 374 #define CONFIG_SYS_FPGA_STATUS_DIP1     0x0002
 375 #define CONFIG_SYS_FPGA_STATUS_DIP2     0x0004
 376 #define CONFIG_SYS_FPGA_STATUS_FLASH    0x0008
 377 #define CONFIG_SYS_FPGA_STATUS_TS_IRQ   0x1000
 378
 379 #define CONFIG_SYS_FPGA_SPARTAN2        1           /* using Xilinx Spartan 2 now    */
 380 #define CONFIG_SYS_FPGA_MAX_SIZE        32*1024     /* 32kByte is enough for XC2S15  */
 381
 382 /* FPGA program pin configuration */
 383 #define CONFIG_SYS_FPGA_PRG             0x04000000  /* FPGA program pin (ppc output) */
 384 #define CONFIG_SYS_FPGA_CLK             0x02000000  /* FPGA clk pin (ppc output)     */
 385 #define CONFIG_SYS_FPGA_DATA            0x01000000  /* FPGA data pin (ppc output)    */
 386 #define CONFIG_SYS_FPGA_INIT            0x00010000  /* FPGA init pin (ppc input)     */
 387 #define CONFIG_SYS_FPGA_DONE            0x00008000  /* FPGA done pin (ppc input)     */
 388
 389 /*-----------------------------------------------------------------------
 390  * Definitions for initial stack pointer and data area (in data cache)
 391  */
 392 #define CONFIG_SYS_INIT_DCACHE_CS       7       /* use cs # 7 for data cache memory    */
 393
 394 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000  /* use data cache                  */
 395 #define CONFIG_SYS_INIT_RAM_SIZE        0x2000  /* Size of used area in RAM            */
 396 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 397 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 398
 399 #endif  /* __CONFIG_H */