include/configs/DU405.h

   1 /*
   2  * (C) Copyright 2001
   3  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35 #define CONFIG_IDENT_STRING     " $Name:  $"
  36
  37 #define CONFIG_405GP            1       /* This is a PPC405 CPU         */
  38 #define CONFIG_4xx              1       /* ...member of PPC4xx family   */
  39 #define CONFIG_DU405            1       /* ...on a DU405 board          */
  40
  41 #define CONFIG_BOARD_EARLY_INIT_F 1     /* call board_early_init_f()    */
  42 #define CONFIG_MISC_INIT_R      1       /* call misc_init_r()           */
  43
  44 #define CONFIG_SYS_CLK_FREQ     25000000 /* external frequency to pll   */
  45
  46 #define CONFIG_BAUDRATE         9600
  47 #define CONFIG_BOOTDELAY        3       /* autoboot after 3 seconds     */
  48
  49 #undef  CONFIG_BOOTARGS
  50 #define CONFIG_BOOTCOMMAND      "bootm fff00000"
  51
  52 #define CONFIG_PREBOOT                  /* enable preboot variable      */
  53
  54 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  55 #define CFG_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
  56
  57 #define CONFIG_MII              1       /* MII PHY management           */
  58 #define CONFIG_PHY_ADDR         0       /* PHY address                  */
  59 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
  60
  61
  62 /*
  63  * BOOTP options
  64  */
  65 #define CONFIG_BOOTP_BOOTFILESIZE
  66 #define CONFIG_BOOTP_BOOTPATH
  67 #define CONFIG_BOOTP_GATEWAY
  68 #define CONFIG_BOOTP_HOSTNAME
  69
  70
  71 /*
  72  * Command line configuration.
  73  */
  74 #include <config_cmd_default.h>
  75
  76 #define CONFIG_CMD_PCI
  77 #define CONFIG_CMD_IRQ
  78 #define CONFIG_CMD_IDE
  79 #define CONFIG_CMD_ELF
  80 #define CONFIG_CMD_MII
  81 #define CONFIG_CMD_DATE
  82 #define CONFIG_CMD_EEPROM
  83
  84
  85 #define CONFIG_MAC_PARTITION
  86 #define CONFIG_DOS_PARTITION
  87
  88 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
  89
  90 #define CONFIG_RTC_MC146818             /* BQ3285 is MC146818 compatible*/
  91 #define CFG_RTC_REG_BASE_ADDR    0xF0000080 /* RTC Base Address         */
  92
  93 #define CONFIG_SDRAM_BANK0      1       /* init onboard SDRAM bank 0    */
  94
  95 /*
  96  * Miscellaneous configurable options
  97  */
  98 #define CFG_LONGHELP                    /* undef to save memory         */
  99 #define CFG_PROMPT      "=> "           /* Monitor Command Prompt       */
 100 #if defined(CONFIG_CMD_KGDB)
 101 #define CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 102 #else
 103 #define CFG_CBSIZE      256             /* Console I/O Buffer Size      */
 104 #endif
 105 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 106 #define CFG_MAXARGS     16              /* max number of command args   */
 107 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 108
 109 #define CFG_CONSOLE_INFO_QUIET  1       /* don't print console @ startup*/
 110
 111 #define CFG_MEMTEST_START       0x0400000       /* memtest works on     */
 112 #define CFG_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 113
 114 #define CFG_EXT_SERIAL_CLOCK    11059200  /* use external serial clock  */
 115
 116 /* The following table includes the supported baudrates */
 117 #define CFG_BAUDRATE_TABLE      \
 118         { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 119          57600, 115200, 230400, 460800, 921600 }
 120
 121 #define CFG_LOAD_ADDR   0x100000        /* default load address */
 122 #define CFG_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 123
 124 #define CFG_HZ          1000            /* decrementer freq: 1 ms ticks */
 125
 126 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 127
 128 #define CFG_RX_ETH_BUFFER       16      /* use 16 rx buffer on 405 emac */
 129
 130 /*-----------------------------------------------------------------------
 131  * PCI stuff
 132  *-----------------------------------------------------------------------
 133  */
 134 #define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
 135 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 136 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 137
 138 #define CONFIG_PCI                      /* include pci support          */
 139 #define CONFIG_PCI_HOST PCI_HOST_AUTO   /* select pci host function     */
 140 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 141                                         /* resource configuration       */
 142
 143 #define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
 144
 145 #define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
 146
 147 #define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
 148 #define CFG_PCI_SUBSYS_DEVICEID 0x0404  /* PCI Device ID: CPCI-ISER4    */
 149 #define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
 150 #define CFG_PCI_PTM1MS  0xff000001      /* 16MB, enable hard-wired to 1 */
 151 #define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 152 #define CFG_PCI_PTM2LA  0xffe00000      /* point to flash               */
 153 #define CFG_PCI_PTM2MS  0xffe00001      /* 2MB, enable                  */
 154 #define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 155
 156 /*-----------------------------------------------------------------------
 157  * IDE/ATA stuff
 158  *-----------------------------------------------------------------------
 159  */
 160 #undef  CONFIG_IDE_8xx_DIRECT           /* no pcmcia interface required */
 161 #undef  CONFIG_IDE_LED                  /* no led for ide supported     */
 162 #undef  CONFIG_IDE_RESET                /* no reset for ide supported   */
 163
 164 #define CFG_IDE_MAXBUS          1               /* max. 1 IDE busses    */
 165 #define CFG_IDE_MAXDEVICE       (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 166
 167 #define CFG_ATA_BASE_ADDR       0xF0100000
 168 #define CFG_ATA_IDE0_OFFSET     0x0000
 169
 170 #define CFG_ATA_DATA_OFFSET     0x0000  /* Offset for data I/O                  */
 171 #define CFG_ATA_REG_OFFSET      0x0000  /* Offset for normal register accesses  */
 172 #define CFG_ATA_ALT_OFFSET      0x0000  /* Offset for alternate registers       */
 173
 174 /*-----------------------------------------------------------------------
 175  * Start addresses for the final memory configuration
 176  * (Set up by the startup code)
 177  * Please note that CFG_SDRAM_BASE _must_ start at 0
 178  */
 179 #define CFG_SDRAM_BASE          0x00000000
 180 #define CFG_FLASH_BASE          0xFFFD0000
 181 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 182 #define CFG_MONITOR_LEN         (192 * 1024)    /* Reserve 192 kB for Monitor   */
 183 #define CFG_MALLOC_LEN          (128 * 1024)    /* Reserve 128 kB for malloc()  */
 184
 185 /*
 186  * For booting Linux, the board info and command line data
 187  * have to be in the first 8 MB of memory, since this is
 188  * the maximum mapped by the Linux kernel during initialization.
 189  */
 190 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 191 /*-----------------------------------------------------------------------
 192  * FLASH organization
 193  */
 194 #define CFG_MAX_FLASH_BANKS     2       /* max number of memory banks           */
 195 #define CFG_MAX_FLASH_SECT      256     /* max number of sectors on one chip    */
 196
 197 #define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
 198 #define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
 199
 200 #define CFG_FLASH_WORD_SIZE     unsigned short  /* flash word size (width)      */
 201 #define CFG_FLASH_ADDR0         0x5555  /* 1st address for flash config cycles  */
 202 #define CFG_FLASH_ADDR1         0x2AAA  /* 2nd address for flash config cycles  */
 203 /*
 204  * The following defines are added for buggy IOP480 byte interface.
 205  * All other boards should use the standard values (CPCI405 etc.)
 206  */
 207 #define CFG_FLASH_READ0         0x0000  /* 0 is standard                        */
 208 #define CFG_FLASH_READ1         0x0001  /* 1 is standard                        */
 209 #define CFG_FLASH_READ2         0x0002  /* 2 is standard                        */
 210
 211 #define CFG_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
 212
 213 /*-----------------------------------------------------------------------
 214  * I2C EEPROM (CAT24WC08) for environment
 215  */
 216 #define CONFIG_HARD_I2C                 /* I2c with hardware support */
 217 #define CFG_I2C_SPEED           400000  /* I2C speed and slave address */
 218 #define CFG_I2C_SLAVE           0x7F
 219
 220 #define CFG_I2C_EEPROM_ADDR     0x50    /* EEPROM CAT28WC08             */
 221 #define CFG_I2C_EEPROM_ADDR_LEN 1       /* Bytes of address             */
 222 /* mask of address bits that overflow into the "EEPROM chip address"    */
 223 #define CFG_I2C_EEPROM_ADDR_OVERFLOW    0x07
 224 #define CFG_EEPROM_PAGE_WRITE_BITS 4    /* The Catalyst CAT24WC08 has   */
 225                                         /* 16 byte page write mode using*/
 226                                         /* last 4 bits of the address   */
 227 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS  10   /* and takes up to 10 msec */
 228 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 229
 230 #define CONFIG_ENV_IS_IN_EEPROM 1       /* use EEPROM for environment vars */
 231 #define CONFIG_ENV_OFFSET               0x000   /* environment starts at the beginning of the EEPROM */
 232 #define CONFIG_ENV_SIZE         0x400   /* 1024 bytes may be used for env vars */
 233                                    /* total size of a CAT24WC08 is 1024 bytes */
 234
 235 /*
 236  * Init Memory Controller:
 237  *
 238  * BR0/1 and OR0/1 (FLASH)
 239  */
 240
 241 #define FLASH_BASE0_PRELIM      0xFF800000      /* FLASH bank #0        */
 242 #define FLASH_BASE1_PRELIM      0xFFC00000      /* FLASH bank #1        */
 243
 244 /*-----------------------------------------------------------------------
 245  * External Bus Controller (EBC) Setup
 246  */
 247
 248 #define FLASH0_BA       0xFFC00000          /* FLASH 0 Base Address             */
 249 #define FLASH1_BA       0xFF800000          /* FLASH 1 Base Address             */
 250 #define CAN_BA          0xF0000000          /* CAN Base Address                 */
 251 #define DUART_BA        0xF0300000          /* DUART Base Address               */
 252 #define CF_BA           0xF0100000          /* CompactFlash Base Address        */
 253 #define SRAM_BA         0xF0200000          /* SRAM Base Address                */
 254 #define DURAG_IO_BA     0xF0400000          /* DURAG Bus IO Base Address        */
 255 #define DURAG_MEM_BA    0xF0500000          /* DURAG Bus Mem Base Address       */
 256
 257 #define FPGA_MODE_REG   (DUART_BA+0x80)     /* FPGA Mode Register               */
 258
 259 /* Memory Bank 0 (Flash Bank 0) initialization                                  */
 260 #define CFG_EBC_PB0AP   0x92015480
 261 #define CFG_EBC_PB0CR   FLASH0_BA | 0x5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 262
 263 /* Memory Bank 1 (Flash Bank 1) initialization                                  */
 264 #define CFG_EBC_PB1AP   0x92015480
 265 #define CFG_EBC_PB1CR   FLASH1_BA | 0x5A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 266
 267 /* Memory Bank 2 (CAN0) initialization                                          */
 268 #define CFG_EBC_PB2AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 269 #define CFG_EBC_PB2CR   CAN_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 270
 271 /* Memory Bank 3 (DUART) initialization                                         */
 272 #define CFG_EBC_PB3AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 273 #define CFG_EBC_PB3CR   DUART_BA | 0x18000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit  */
 274
 275 /* Memory Bank 4 (CompactFlash IDE) initialization                              */
 276 #define CFG_EBC_PB4AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 277 #define CFG_EBC_PB4CR   CF_BA | 0x1A000     /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 278
 279 /* Memory Bank 5 (SRAM) initialization                                          */
 280 #define CFG_EBC_PB5AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 281 #define CFG_EBC_PB5CR   SRAM_BA | 0x1A000   /* BAS=0xF02,BS=1MB,BU=R/W,BW=16bit */
 282
 283 /* Memory Bank 6 (DURAG Bus IO Space) initialization                            */
 284 #define CFG_EBC_PB6AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 285 #define CFG_EBC_PB6CR   DURAG_IO_BA | 0x18000 /* BAS=0xF04,BS=1MB,BU=R/W,BW=8bit*/
 286
 287 /* Memory Bank 7 (DURAG Bus Mem Space) initialization                           */
 288 #define CFG_EBC_PB7AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 289 #define CFG_EBC_PB7CR   DURAG_MEM_BA | 0x18000 /* BAS=0xF05,BS=1MB,BU=R/W,BW=8bit */
 290
 291
 292 /*-----------------------------------------------------------------------
 293  * Definitions for initial stack pointer and data area (in DPRAM)
 294  */
 295
 296 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
 297 #define CFG_TEMP_STACK_OCM        1
 298
 299 /* On Chip Memory location */
 300 #define CFG_OCM_DATA_ADDR       0xF8000000
 301 #define CFG_OCM_DATA_SIZE       0x1000
 302
 303 #define CFG_INIT_RAM_ADDR       CFG_OCM_DATA_ADDR /* inside of SDRAM            */
 304 #define CFG_INIT_RAM_END        CFG_OCM_DATA_SIZE /* End of used area in RAM    */
 305 #define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
 306 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 307 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 308
 309
 310 /*
 311  * Internal Definitions
 312  *
 313  * Boot Flags
 314  */
 315 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 316 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 317
 318 #endif  /* __CONFIG_H */