include/configs/M5208EVBE.h

   1 /*
   2  * Configuation settings for the Freescale MCF5208EVBe.
   3  *
   4  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #ifndef _M5208EVBE_H
  27 #define _M5208EVBE_H
  28
  29 /*
  30  * High Level Configuration Options
  31  * (easy to change)
  32  */
  33 #define CONFIG_MCF520x          /* define processor family */
  34 #define CONFIG_M5208            /* define processor type */
  35
  36 #define CONFIG_MCFUART
  37 #define CONFIG_SYS_UART_PORT            (0)
  38 #define CONFIG_BAUDRATE                 115200
  39 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600 , 19200 , 38400 , 57600, 115200 }
  40
  41 #undef CONFIG_WATCHDOG
  42 #define CONFIG_WATCHDOG_TIMEOUT         5000
  43
  44 /* Command line configuration */
  45 #include <config_cmd_default.h>
  46
  47 #define CONFIG_CMD_CACHE
  48 #define CONFIG_CMD_ELF
  49 #define CONFIG_CMD_FLASH
  50 #undef CONFIG_CMD_I2C
  51 #define CONFIG_CMD_MEMORY
  52 #define CONFIG_CMD_MISC
  53 #define CONFIG_CMD_MII
  54 #define CONFIG_CMD_NET
  55 #define CONFIG_CMD_PING
  56 #define CONFIG_CMD_REGINFO
  57
  58 #define CONFIG_MCFFEC
  59 #ifdef CONFIG_MCFFEC
  60 #       define CONFIG_NET_MULTI         1
  61 #       define CONFIG_MII               1
  62 #       define CONFIG_MII_INIT          1
  63 #       define CONFIG_SYS_DISCOVER_PHY
  64 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  65 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  66 #       define CONFIG_HAS_ETH1
  67
  68 #       define CONFIG_SYS_FEC0_PINMUX   0
  69 #       define CONFIG_SYS_FEC0_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  70 #       define MCFFEC_TOUT_LOOP         50000
  71 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  72 #       ifndef CONFIG_SYS_DISCOVER_PHY
  73 #               define FECDUPLEX        FULL
  74 #               define FECSPEED         _100BASET
  75 #       else
  76 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  77 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  78 #               endif
  79 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  80 #endif
  81
  82 /* Timer */
  83 #define CONFIG_MCFTMR
  84 #undef CONFIG_MCFPIT
  85
  86 /* I2C */
  87 #define CONFIG_FSL_I2C
  88 #define CONFIG_HARD_I2C                 /* I2C with hw support */
  89 #undef CONFIG_SOFT_I2C                  /* I2C bit-banged */
  90 #define CONFIG_SYS_I2C_SPEED            80000
  91 #define CONFIG_SYS_I2C_SLAVE            0x7F
  92 #define CONFIG_SYS_I2C_OFFSET           0x58000
  93 #define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
  94
  95 #define CONFIG_BOOTDELAY                1       /* autoboot after 5 seconds */
  96 #define CONFIG_UDP_CHECKSUM
  97
  98 #ifdef CONFIG_MCFFEC
  99 #       define CONFIG_ETHADDR   00:e0:0c:bc:e5:60
 100 #       define CONFIG_IPADDR    192.162.1.2
 101 #       define CONFIG_NETMASK   255.255.255.0
 102 #       define CONFIG_SERVERIP  192.162.1.1
 103 #       define CONFIG_GATEWAYIP 192.162.1.1
 104 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
 105 #endif                          /* CONFIG_MCFFEC */
 106
 107 #define CONFIG_HOSTNAME         M5208EVBe
 108 #define CONFIG_EXTRA_ENV_SETTINGS               \
 109         "netdev=eth0\0"                         \
 110         "loadaddr=40010000\0"                   \
 111         "u-boot=u-boot.bin\0"                   \
 112         "load=tftp ${loadaddr) ${u-boot}\0"     \
 113         "upd=run load; run prog\0"              \
 114         "prog=prot off 0 3ffff;"                \
 115         "era 0 3ffff;"                          \
 116         "cp.b ${loadaddr} 0 ${filesize};"       \
 117         "save\0"                                \
 118         ""
 119
 120 #define CONFIG_PRAM             512     /* 512 KB */
 121 #define CONFIG_SYS_PROMPT       "-> "
 122 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 123
 124 #ifdef CONFIG_CMD_KGDB
 125 #       define CONFIG_SYS_CBSIZE        1024    /* Console I/O Buffer Size */
 126 #else
 127 #       define CONFIG_SYS_CBSIZE        256     /* Console I/O Buffer Size */
 128 #endif
 129
 130 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 131 #define CONFIG_SYS_MAXARGS      16              /* max number of cmd args */
 132 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Arg Buf Sz */
 133 #define CONFIG_SYS_LOAD_ADDR    0x40010000
 134
 135 #define CONFIG_SYS_HZ           1000
 136 #define CONFIG_SYS_CLK          166666666       /* CPU Core Clock */
 137 #define CONFIG_SYS_PLL_ODR      0x36
 138 #define CONFIG_SYS_PLL_FDR      0x7D
 139
 140 #define CONFIG_SYS_MBAR         0xFC000000
 141
 142 /*
 143  * Low Level Configuration Settings
 144  * (address mappings, register initial values, etc.)
 145  * You should know what you are doing if you make changes here.
 146  */
 147 /* Definitions for initial stack pointer and data area (in DPRAM) */
 148 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 149 #define CONFIG_SYS_INIT_RAM_END         0x4000  /* End of used area in internal SRAM */
 150 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 151 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* size in bytes reserved for initial data */
 152 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
 153 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 154
 155 /*
 156  * Start addresses for the final memory configuration
 157  * (Set up by the startup code)
 158  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 159  */
 160 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 161 #define CONFIG_SYS_SDRAM_SIZE           64      /* SDRAM size in MB */
 162 #define CONFIG_SYS_SDRAM_CFG1           0x43711630
 163 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
 164 #define CONFIG_SYS_SDRAM_CTRL           0xE1002000
 165 #define CONFIG_SYS_SDRAM_EMOD           0x80010000
 166 #define CONFIG_SYS_SDRAM_MODE           0x00CD0000
 167
 168 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 169 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 170
 171 #define CONFIG_SYS_MONITOR_BASE         (CONFIG_SYS_FLASH_BASE + 0x400)
 172 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 173
 174 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 175 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 176
 177 /*
 178  * For booting Linux, the board info and command line data
 179  * have to be in the first 8 MB of memory, since this is
 180  * the maximum mapped by the Linux kernel during initialization ??
 181  */
 182 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 183 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 184
 185 /* FLASH organization */
 186 #define CONFIG_SYS_FLASH_CFI
 187 #ifdef CONFIG_SYS_FLASH_CFI
 188 #       define CONFIG_FLASH_CFI_DRIVER          1
 189 #       define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
 190 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 191 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 192 #       define CONFIG_SYS_MAX_FLASH_SECT        254     /* max number of sectors on one chip */
 193 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 194 #endif
 195
 196 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 197
 198 /*
 199  * Configuration for environment
 200  * Environment is embedded in u-boot in the second sector of the flash
 201  */
 202 #define CONFIG_ENV_OFFSET               0x2000
 203 #define CONFIG_ENV_SIZE                 0x1000
 204 #define CONFIG_ENV_SECT_SIZE            0x2000
 205 #define CONFIG_ENV_IS_IN_FLASH          1
 206
 207 /* Cache Configuration */
 208 #define CONFIG_SYS_CACHELINE_SIZE       16
 209
 210 /* Chipselect bank definitions */
 211 /*
 212  * CS0 - NOR Flash
 213  * CS1 - Available
 214  * CS2 - Available
 215  * CS3 - Available
 216  * CS4 - Available
 217  * CS5 - Available
 218  */
 219 #define CONFIG_SYS_CS0_BASE             0
 220 #define CONFIG_SYS_CS0_MASK             0x007F0001
 221 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 222
 223 #endif                          /* _M5208EVBE_H */