include/configs/M5275EVB.h

   1 /*
   2  * Configuation settings for the Motorola MC5275EVB board.
   3  *
   4  * By Arthur Shipkowski <art@videon-central.com>
   5  * Copyright (C) 2005 Videon Central, Inc.
   6  *
   7  * Based off of M5272C3 board code by Josef Baumgartner
   8  * <josef.baumgartner@telex.de>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 /*
  14  * board/config.h - configuration options, board specific
  15  */
  16
  17 #ifndef _M5275EVB_H
  18 #define _M5275EVB_H
  19
  20 /*
  21  * High Level Configuration Options
  22  * (easy to change)
  23  */
  24 #define CONFIG_M5275EVB                 /* define board type */
  25
  26 #define CONFIG_MCFTMR
  27
  28 #define CONFIG_MCFUART
  29 #define CONFIG_SYS_UART_PORT            (0)
  30
  31 /* Configuration for environment
  32  * Environment is embedded in u-boot in the second sector of the flash
  33  */
  34 #ifndef CONFIG_MONITOR_IS_IN_RAM
  35 #define CONFIG_ENV_OFFSET               0x4000
  36 #define CONFIG_ENV_SECT_SIZE    0x2000
  37 #else
  38 #define CONFIG_ENV_ADDR         0xffe04000
  39 #define CONFIG_ENV_SECT_SIZE    0x2000
  40 #endif
  41
  42 #define LDS_BOARD_TEXT \
  43         . = DEFINED(env_offset) ? env_offset : .; \
  44         env/embedded.o(.text);
  45
  46 /*
  47  * BOOTP options
  48  */
  49 #define CONFIG_BOOTP_BOOTFILESIZE
  50 #define CONFIG_BOOTP_BOOTPATH
  51 #define CONFIG_BOOTP_GATEWAY
  52 #define CONFIG_BOOTP_HOSTNAME
  53
  54 /* Available command configuration */
  55
  56 #define CONFIG_MCFFEC
  57 #ifdef CONFIG_MCFFEC
  58 #define CONFIG_MII              1
  59 #define CONFIG_MII_INIT         1
  60 #define CONFIG_SYS_DISCOVER_PHY
  61 #define CONFIG_SYS_RX_ETH_BUFFER        8
  62 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  63 #define CONFIG_SYS_FEC0_PINMUX          0
  64 #define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
  65 #define CONFIG_SYS_FEC1_PINMUX          0
  66 #define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC1_IOBASE
  67 #define MCFFEC_TOUT_LOOP        50000
  68 #define CONFIG_HAS_ETH1
  69 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  70 #ifndef CONFIG_SYS_DISCOVER_PHY
  71 #define FECDUPLEX               FULL
  72 #define FECSPEED                _100BASET
  73 #else
  74 #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  75 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  76 #endif
  77 #endif
  78 #endif
  79
  80 /* I2C */
  81 #define CONFIG_SYS_I2C
  82 #define CONFIG_SYS_I2C_FSL
  83 #define CONFIG_SYS_FSL_I2C_SPEED        80000
  84 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
  85 #define CONFIG_SYS_FSL_I2C_OFFSET       0x00000300
  86 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
  87 #define CONFIG_SYS_I2C_PINMUX_REG       (gpio_reg->par_feci2c)
  88 #define CONFIG_SYS_I2C_PINMUX_CLR       (0xFFF0)
  89 #define CONFIG_SYS_I2C_PINMUX_SET       (0x000F)
  90
  91 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  92
  93 #if (CONFIG_CMD_KGDB)
  94 #       define CONFIG_SYS_CBSIZE        1024
  95 #else
  96 #       define CONFIG_SYS_CBSIZE        256
  97 #endif
  98 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  99 #define CONFIG_SYS_MAXARGS              16
 100 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 101
 102 #define CONFIG_SYS_LOAD_ADDR            0x800000
 103
 104 #define CONFIG_BOOTCOMMAND      "bootm ffe40000"
 105 #define CONFIG_SYS_MEMTEST_START        0x400
 106 #define CONFIG_SYS_MEMTEST_END          0x380000
 107
 108 #ifdef CONFIG_MCFFEC
 109 #       define CONFIG_NET_RETRY_COUNT   5
 110 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
 111 #endif                          /* FEC_ENET */
 112
 113 #define CONFIG_EXTRA_ENV_SETTINGS               \
 114         "netdev=eth0\0"                         \
 115         "loadaddr=10000\0"                      \
 116         "uboot=u-boot.bin\0"                    \
 117         "load=tftp ${loadaddr} ${uboot}\0"      \
 118         "upd=run load; run prog\0"              \
 119         "prog=prot off ffe00000 ffe3ffff;"      \
 120         "era ffe00000 ffe3ffff;"                \
 121         "cp.b ${loadaddr} ffe00000 ${filesize};"\
 122         "save\0"                                \
 123         ""
 124
 125 #define CONFIG_SYS_CLK                  150000000
 126
 127 /*
 128  * Low Level Configuration Settings
 129  * (address mappings, register initial values, etc.)
 130  * You should know what you are doing if you make changes here.
 131  */
 132
 133 #define CONFIG_SYS_MBAR         0x40000000
 134
 135 /*-----------------------------------------------------------------------
 136  * Definitions for initial stack pointer and data area (in DPRAM)
 137  */
 138 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000
 139 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000 /* Size of used area in internal SRAM */
 140 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 141 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 142
 143 /*-----------------------------------------------------------------------
 144  * Start addresses for the final memory configuration
 145  * (Set up by the startup code)
 146  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 147  */
 148 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 149 #define CONFIG_SYS_SDRAM_SIZE           16      /* SDRAM size in MB */
 150 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 151
 152 #ifdef CONFIG_MONITOR_IS_IN_RAM
 153 #define CONFIG_SYS_MONITOR_BASE 0x20000
 154 #else
 155 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 156 #endif
 157
 158 #define CONFIG_SYS_MONITOR_LEN          0x20000
 159 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 160 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 161
 162 /*
 163  * For booting Linux, the board info and command line data
 164  * have to be in the first 8 MB of memory, since this is
 165  * the maximum mapped by the Linux kernel during initialization ??
 166  */
 167 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 168 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 169
 170 /*-----------------------------------------------------------------------
 171  * FLASH organization
 172  */
 173 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 174 #define CONFIG_SYS_MAX_FLASH_SECT       11      /* max number of sectors on one chip */
 175 #define CONFIG_SYS_FLASH_ERASE_TOUT     1000
 176
 177 #define CONFIG_SYS_FLASH_CFI            1
 178 #define CONFIG_FLASH_CFI_DRIVER 1
 179 #define CONFIG_SYS_FLASH_SIZE           0x200000
 180
 181 /*-----------------------------------------------------------------------
 182  * Cache Configuration
 183  */
 184 #define CONFIG_SYS_CACHELINE_SIZE       16
 185
 186 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 187                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 188 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 189                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 190 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
 191 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 192                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 193                                          CF_ACR_EN | CF_ACR_SM_ALL)
 194 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
 195                                          CF_CACR_DISD | CF_CACR_INVI | \
 196                                          CF_CACR_CEIB | CF_CACR_DCM | \
 197                                          CF_CACR_EUSP)
 198
 199 /*-----------------------------------------------------------------------
 200  * Memory bank definitions
 201  */
 202 #define CONFIG_SYS_CS0_BASE             0xffe00000
 203 #define CONFIG_SYS_CS0_CTRL             0x00001980
 204 #define CONFIG_SYS_CS0_MASK             0x001F0001
 205
 206 #define CONFIG_SYS_CS1_BASE             0x30000000
 207 #define CONFIG_SYS_CS1_CTRL             0x00001900
 208 #define CONFIG_SYS_CS1_MASK             0x00070001
 209
 210 /*-----------------------------------------------------------------------
 211  * Port configuration
 212  */
 213 #define CONFIG_SYS_FECI2C               0x0FA0
 214
 215 #endif  /* _M5275EVB_H */