include/configs/M5275EVB.h

   1 /*
   2  * Configuation settings for the Motorola MC5275EVB board.
   3  *
   4  * By Arthur Shipkowski <art@videon-central.com>
   5  * Copyright (C) 2005 Videon Central, Inc.
   6  *
   7  * Based off of M5272C3 board code by Josef Baumgartner
   8  * <josef.baumgartner@telex.de>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 /*
  14  * board/config.h - configuration options, board specific
  15  */
  16
  17 #ifndef _M5275EVB_H
  18 #define _M5275EVB_H
  19
  20 /*
  21  * High Level Configuration Options
  22  * (easy to change)
  23  */
  24
  25 #define CONFIG_MCFTMR
  26
  27 #define CONFIG_MCFUART
  28 #define CONFIG_SYS_UART_PORT            (0)
  29
  30 /* Configuration for environment
  31  * Environment is embedded in u-boot in the second sector of the flash
  32  */
  33 #ifndef CONFIG_MONITOR_IS_IN_RAM
  34 #define CONFIG_ENV_OFFSET               0x4000
  35 #define CONFIG_ENV_SECT_SIZE    0x2000
  36 #else
  37 #define CONFIG_ENV_ADDR         0xffe04000
  38 #define CONFIG_ENV_SECT_SIZE    0x2000
  39 #endif
  40
  41 #define LDS_BOARD_TEXT \
  42         . = DEFINED(env_offset) ? env_offset : .; \
  43         env/embedded.o(.text);
  44
  45 /*
  46  * BOOTP options
  47  */
  48 #define CONFIG_BOOTP_BOOTFILESIZE
  49 #define CONFIG_BOOTP_BOOTPATH
  50 #define CONFIG_BOOTP_GATEWAY
  51 #define CONFIG_BOOTP_HOSTNAME
  52
  53 /* Available command configuration */
  54
  55 #define CONFIG_MCFFEC
  56 #ifdef CONFIG_MCFFEC
  57 #define CONFIG_MII              1
  58 #define CONFIG_MII_INIT         1
  59 #define CONFIG_SYS_DISCOVER_PHY
  60 #define CONFIG_SYS_RX_ETH_BUFFER        8
  61 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  62 #define CONFIG_SYS_FEC0_PINMUX          0
  63 #define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
  64 #define CONFIG_SYS_FEC1_PINMUX          0
  65 #define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC1_IOBASE
  66 #define MCFFEC_TOUT_LOOP        50000
  67 #define CONFIG_HAS_ETH1
  68 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  69 #ifndef CONFIG_SYS_DISCOVER_PHY
  70 #define FECDUPLEX               FULL
  71 #define FECSPEED                _100BASET
  72 #else
  73 #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  74 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  75 #endif
  76 #endif
  77 #endif
  78
  79 /* I2C */
  80 #define CONFIG_SYS_I2C
  81 #define CONFIG_SYS_I2C_FSL
  82 #define CONFIG_SYS_FSL_I2C_SPEED        80000
  83 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
  84 #define CONFIG_SYS_FSL_I2C_OFFSET       0x00000300
  85 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
  86 #define CONFIG_SYS_I2C_PINMUX_REG       (gpio_reg->par_feci2c)
  87 #define CONFIG_SYS_I2C_PINMUX_CLR       (0xFFF0)
  88 #define CONFIG_SYS_I2C_PINMUX_SET       (0x000F)
  89
  90 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  91
  92 #define CONFIG_SYS_LOAD_ADDR            0x800000
  93
  94 #define CONFIG_BOOTCOMMAND      "bootm ffe40000"
  95 #define CONFIG_SYS_MEMTEST_START        0x400
  96 #define CONFIG_SYS_MEMTEST_END          0x380000
  97
  98 #ifdef CONFIG_MCFFEC
  99 #       define CONFIG_NET_RETRY_COUNT   5
 100 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
 101 #endif                          /* FEC_ENET */
 102
 103 #define CONFIG_EXTRA_ENV_SETTINGS               \
 104         "netdev=eth0\0"                         \
 105         "loadaddr=10000\0"                      \
 106         "uboot=u-boot.bin\0"                    \
 107         "load=tftp ${loadaddr} ${uboot}\0"      \
 108         "upd=run load; run prog\0"              \
 109         "prog=prot off ffe00000 ffe3ffff;"      \
 110         "era ffe00000 ffe3ffff;"                \
 111         "cp.b ${loadaddr} ffe00000 ${filesize};"\
 112         "save\0"                                \
 113         ""
 114
 115 #define CONFIG_SYS_CLK                  150000000
 116
 117 /*
 118  * Low Level Configuration Settings
 119  * (address mappings, register initial values, etc.)
 120  * You should know what you are doing if you make changes here.
 121  */
 122
 123 #define CONFIG_SYS_MBAR         0x40000000
 124
 125 /*-----------------------------------------------------------------------
 126  * Definitions for initial stack pointer and data area (in DPRAM)
 127  */
 128 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000
 129 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000 /* Size of used area in internal SRAM */
 130 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 131 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 132
 133 /*-----------------------------------------------------------------------
 134  * Start addresses for the final memory configuration
 135  * (Set up by the startup code)
 136  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 137  */
 138 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 139 #define CONFIG_SYS_SDRAM_SIZE           16      /* SDRAM size in MB */
 140 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 141
 142 #ifdef CONFIG_MONITOR_IS_IN_RAM
 143 #define CONFIG_SYS_MONITOR_BASE 0x20000
 144 #else
 145 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 146 #endif
 147
 148 #define CONFIG_SYS_MONITOR_LEN          0x20000
 149 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 150 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 151
 152 /*
 153  * For booting Linux, the board info and command line data
 154  * have to be in the first 8 MB of memory, since this is
 155  * the maximum mapped by the Linux kernel during initialization ??
 156  */
 157 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 158 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 159
 160 /*-----------------------------------------------------------------------
 161  * FLASH organization
 162  */
 163 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 164 #define CONFIG_SYS_MAX_FLASH_SECT       11      /* max number of sectors on one chip */
 165 #define CONFIG_SYS_FLASH_ERASE_TOUT     1000
 166
 167 #define CONFIG_SYS_FLASH_CFI            1
 168 #define CONFIG_FLASH_CFI_DRIVER 1
 169 #define CONFIG_SYS_FLASH_SIZE           0x200000
 170
 171 /*-----------------------------------------------------------------------
 172  * Cache Configuration
 173  */
 174 #define CONFIG_SYS_CACHELINE_SIZE       16
 175
 176 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 177                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 178 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 179                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 180 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
 181 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 182                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 183                                          CF_ACR_EN | CF_ACR_SM_ALL)
 184 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
 185                                          CF_CACR_DISD | CF_CACR_INVI | \
 186                                          CF_CACR_CEIB | CF_CACR_DCM | \
 187                                          CF_CACR_EUSP)
 188
 189 /*-----------------------------------------------------------------------
 190  * Memory bank definitions
 191  */
 192 #define CONFIG_SYS_CS0_BASE             0xffe00000
 193 #define CONFIG_SYS_CS0_CTRL             0x00001980
 194 #define CONFIG_SYS_CS0_MASK             0x001F0001
 195
 196 #define CONFIG_SYS_CS1_BASE             0x30000000
 197 #define CONFIG_SYS_CS1_CTRL             0x00001900
 198 #define CONFIG_SYS_CS1_MASK             0x00070001
 199
 200 /*-----------------------------------------------------------------------
 201  * Port configuration
 202  */
 203 #define CONFIG_SYS_FECI2C               0x0FA0
 204
 205 #endif  /* _M5275EVB_H */