include/configs/M5275EVB.h

   1 /*
   2  * Configuation settings for the Motorola MC5275EVB board.
   3  *
   4  * By Arthur Shipkowski <art@videon-central.com>
   5  * Copyright (C) 2005 Videon Central, Inc.
   6  *
   7  * Based off of M5272C3 board code by Josef Baumgartner
   8  * <josef.baumgartner@telex.de>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 /*
  14  * board/config.h - configuration options, board specific
  15  */
  16
  17 #ifndef _M5275EVB_H
  18 #define _M5275EVB_H
  19
  20 /*
  21  * High Level Configuration Options
  22  * (easy to change)
  23  */
  24 #define CONFIG_M5275EVB                 /* define board type */
  25
  26 #define CONFIG_MCFTMR
  27
  28 #define CONFIG_MCFUART
  29 #define CONFIG_SYS_UART_PORT            (0)
  30
  31 /* Configuration for environment
  32  * Environment is embedded in u-boot in the second sector of the flash
  33  */
  34 #ifndef CONFIG_MONITOR_IS_IN_RAM
  35 #define CONFIG_ENV_OFFSET               0x4000
  36 #define CONFIG_ENV_SECT_SIZE    0x2000
  37 #else
  38 #define CONFIG_ENV_ADDR         0xffe04000
  39 #define CONFIG_ENV_SECT_SIZE    0x2000
  40 #endif
  41
  42 #define LDS_BOARD_TEXT \
  43         . = DEFINED(env_offset) ? env_offset : .; \
  44         env/embedded.o(.text);
  45
  46 /*
  47  * BOOTP options
  48  */
  49 #define CONFIG_BOOTP_BOOTFILESIZE
  50 #define CONFIG_BOOTP_BOOTPATH
  51 #define CONFIG_BOOTP_GATEWAY
  52 #define CONFIG_BOOTP_HOSTNAME
  53
  54 /* Available command configuration */
  55
  56 #define CONFIG_MCFFEC
  57 #ifdef CONFIG_MCFFEC
  58 #define CONFIG_MII              1
  59 #define CONFIG_MII_INIT         1
  60 #define CONFIG_SYS_DISCOVER_PHY
  61 #define CONFIG_SYS_RX_ETH_BUFFER        8
  62 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  63 #define CONFIG_SYS_FEC0_PINMUX          0
  64 #define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
  65 #define CONFIG_SYS_FEC1_PINMUX          0
  66 #define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC1_IOBASE
  67 #define MCFFEC_TOUT_LOOP        50000
  68 #define CONFIG_HAS_ETH1
  69 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  70 #ifndef CONFIG_SYS_DISCOVER_PHY
  71 #define FECDUPLEX               FULL
  72 #define FECSPEED                _100BASET
  73 #else
  74 #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  75 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  76 #endif
  77 #endif
  78 #endif
  79
  80 /* I2C */
  81 #define CONFIG_SYS_I2C
  82 #define CONFIG_SYS_I2C_FSL
  83 #define CONFIG_SYS_FSL_I2C_SPEED        80000
  84 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
  85 #define CONFIG_SYS_FSL_I2C_OFFSET       0x00000300
  86 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
  87 #define CONFIG_SYS_I2C_PINMUX_REG       (gpio_reg->par_feci2c)
  88 #define CONFIG_SYS_I2C_PINMUX_CLR       (0xFFF0)
  89 #define CONFIG_SYS_I2C_PINMUX_SET       (0x000F)
  90
  91 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  92
  93 #define CONFIG_SYS_LOAD_ADDR            0x800000
  94
  95 #define CONFIG_BOOTCOMMAND      "bootm ffe40000"
  96 #define CONFIG_SYS_MEMTEST_START        0x400
  97 #define CONFIG_SYS_MEMTEST_END          0x380000
  98
  99 #ifdef CONFIG_MCFFEC
 100 #       define CONFIG_NET_RETRY_COUNT   5
 101 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
 102 #endif                          /* FEC_ENET */
 103
 104 #define CONFIG_EXTRA_ENV_SETTINGS               \
 105         "netdev=eth0\0"                         \
 106         "loadaddr=10000\0"                      \
 107         "uboot=u-boot.bin\0"                    \
 108         "load=tftp ${loadaddr} ${uboot}\0"      \
 109         "upd=run load; run prog\0"              \
 110         "prog=prot off ffe00000 ffe3ffff;"      \
 111         "era ffe00000 ffe3ffff;"                \
 112         "cp.b ${loadaddr} ffe00000 ${filesize};"\
 113         "save\0"                                \
 114         ""
 115
 116 #define CONFIG_SYS_CLK                  150000000
 117
 118 /*
 119  * Low Level Configuration Settings
 120  * (address mappings, register initial values, etc.)
 121  * You should know what you are doing if you make changes here.
 122  */
 123
 124 #define CONFIG_SYS_MBAR         0x40000000
 125
 126 /*-----------------------------------------------------------------------
 127  * Definitions for initial stack pointer and data area (in DPRAM)
 128  */
 129 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000
 130 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000 /* Size of used area in internal SRAM */
 131 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 132 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 133
 134 /*-----------------------------------------------------------------------
 135  * Start addresses for the final memory configuration
 136  * (Set up by the startup code)
 137  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 138  */
 139 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 140 #define CONFIG_SYS_SDRAM_SIZE           16      /* SDRAM size in MB */
 141 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 142
 143 #ifdef CONFIG_MONITOR_IS_IN_RAM
 144 #define CONFIG_SYS_MONITOR_BASE 0x20000
 145 #else
 146 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 147 #endif
 148
 149 #define CONFIG_SYS_MONITOR_LEN          0x20000
 150 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 151 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 152
 153 /*
 154  * For booting Linux, the board info and command line data
 155  * have to be in the first 8 MB of memory, since this is
 156  * the maximum mapped by the Linux kernel during initialization ??
 157  */
 158 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 159 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 160
 161 /*-----------------------------------------------------------------------
 162  * FLASH organization
 163  */
 164 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 165 #define CONFIG_SYS_MAX_FLASH_SECT       11      /* max number of sectors on one chip */
 166 #define CONFIG_SYS_FLASH_ERASE_TOUT     1000
 167
 168 #define CONFIG_SYS_FLASH_CFI            1
 169 #define CONFIG_FLASH_CFI_DRIVER 1
 170 #define CONFIG_SYS_FLASH_SIZE           0x200000
 171
 172 /*-----------------------------------------------------------------------
 173  * Cache Configuration
 174  */
 175 #define CONFIG_SYS_CACHELINE_SIZE       16
 176
 177 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 178                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 179 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 180                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 181 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
 182 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 183                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 184                                          CF_ACR_EN | CF_ACR_SM_ALL)
 185 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
 186                                          CF_CACR_DISD | CF_CACR_INVI | \
 187                                          CF_CACR_CEIB | CF_CACR_DCM | \
 188                                          CF_CACR_EUSP)
 189
 190 /*-----------------------------------------------------------------------
 191  * Memory bank definitions
 192  */
 193 #define CONFIG_SYS_CS0_BASE             0xffe00000
 194 #define CONFIG_SYS_CS0_CTRL             0x00001980
 195 #define CONFIG_SYS_CS0_MASK             0x001F0001
 196
 197 #define CONFIG_SYS_CS1_BASE             0x30000000
 198 #define CONFIG_SYS_CS1_CTRL             0x00001900
 199 #define CONFIG_SYS_CS1_MASK             0x00070001
 200
 201 /*-----------------------------------------------------------------------
 202  * Port configuration
 203  */
 204 #define CONFIG_SYS_FECI2C               0x0FA0
 205
 206 #endif  /* _M5275EVB_H */