include/configs/M5373EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF5373 FireEngine board.
   3  *
   4  * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M5373EVB_H
  15 #define _M5373EVB_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21
  22 #define CONFIG_MCFUART
  23 #define CONFIG_SYS_UART_PORT            (0)
  24 #define CONFIG_BAUDRATE         115200
  25
  26 #undef CONFIG_WATCHDOG
  27 #define CONFIG_WATCHDOG_TIMEOUT 3360    /* timeout in ms, max is 3.36 sec */
  28
  29 /* Command line configuration */
  30 #include <config_cmd_default.h>
  31
  32 #define CONFIG_CMD_CACHE
  33 #define CONFIG_CMD_DATE
  34 #define CONFIG_CMD_ELF
  35 #define CONFIG_CMD_FLASH
  36 #define CONFIG_CMD_I2C
  37 #define CONFIG_CMD_MEMORY
  38 #define CONFIG_CMD_MISC
  39 #define CONFIG_CMD_MII
  40 #define CONFIG_CMD_NET
  41 #define CONFIG_CMD_PING
  42 #define CONFIG_CMD_REGINFO
  43
  44 #ifdef CONFIG_NANDFLASH_SIZE
  45 #      define CONFIG_CMD_NAND
  46 #endif
  47
  48 #define CONFIG_SYS_UNIFY_CACHE
  49
  50 #define CONFIG_MCFFEC
  51 #ifdef CONFIG_MCFFEC
  52 #       define CONFIG_MII               1
  53 #       define CONFIG_MII_INIT          1
  54 #       define CONFIG_SYS_DISCOVER_PHY
  55 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  56 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  57
  58 #       define CONFIG_SYS_FEC0_PINMUX           0
  59 #       define CONFIG_SYS_FEC0_MIIBASE          CONFIG_SYS_FEC0_IOBASE
  60 #       define MCFFEC_TOUT_LOOP         50000
  61 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  62 #       ifndef CONFIG_SYS_DISCOVER_PHY
  63 #               define FECDUPLEX        FULL
  64 #               define FECSPEED         _100BASET
  65 #       else
  66 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  67 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  68 #               endif
  69 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  70 #endif
  71
  72 #define CONFIG_MCFRTC
  73 #undef RTC_DEBUG
  74
  75 /* Timer */
  76 #define CONFIG_MCFTMR
  77 #undef CONFIG_MCFPIT
  78
  79 /* I2C */
  80 #define CONFIG_SYS_I2C
  81 #define CONFIG_SYS_I2C_FSL
  82 #define CONFIG_SYS_FSL_I2C_SPEED        80000
  83 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
  84 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
  85 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
  86
  87 #define CONFIG_BOOTDELAY        1       /* autoboot after 5 seconds */
  88 #define CONFIG_UDP_CHECKSUM
  89
  90 #ifdef CONFIG_MCFFEC
  91 #       define CONFIG_ETHADDR   00:e0:0c:bc:e5:60
  92 #       define CONFIG_IPADDR    192.162.1.2
  93 #       define CONFIG_NETMASK   255.255.255.0
  94 #       define CONFIG_SERVERIP  192.162.1.1
  95 #       define CONFIG_GATEWAYIP 192.162.1.1
  96 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
  97 #endif                          /* FEC_ENET */
  98
  99 #define CONFIG_HOSTNAME         M5373EVB
 100 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 101         "netdev=eth0\0"                 \
 102         "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"      \
 103         "u-boot=u-boot.bin\0"   \
 104         "load=tftp ${loadaddr) ${u-boot}\0"     \
 105         "upd=run load; run prog\0"      \
 106         "prog=prot off 0 3ffff;"        \
 107         "era 0 3ffff;"  \
 108         "cp.b ${loadaddr} 0 ${filesize};"       \
 109         "save\0"        \
 110         ""
 111
 112 #define CONFIG_PRAM             512     /* 512 KB */
 113 #define CONFIG_SYS_PROMPT               "-> "
 114 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 115
 116 #ifdef CONFIG_CMD_KGDB
 117 #       define CONFIG_SYS_CBSIZE        1024    /* Console I/O Buffer Size */
 118 #else
 119 #       define CONFIG_SYS_CBSIZE        256     /* Console I/O Buffer Size */
 120 #endif
 121
 122 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 123 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 124 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 125 #define CONFIG_SYS_LOAD_ADDR            0x40010000
 126
 127 #define CONFIG_SYS_CLK                  80000000
 128 #define CONFIG_SYS_CPU_CLK              CONFIG_SYS_CLK * 3
 129
 130 #define CONFIG_SYS_MBAR         0xFC000000
 131
 132 #define CONFIG_SYS_LATCH_ADDR           (CONFIG_SYS_CS1_BASE + 0x80000)
 133
 134 /*
 135  * Low Level Configuration Settings
 136  * (address mappings, register initial values, etc.)
 137  * You should know what you are doing if you make changes here.
 138  */
 139 /*-----------------------------------------------------------------------
 140  * Definitions for initial stack pointer and data area (in DPRAM)
 141  */
 142 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 143 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000  /* Size of used area in internal SRAM */
 144 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 145 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
 146 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 147
 148 /*-----------------------------------------------------------------------
 149  * Start addresses for the final memory configuration
 150  * (Set up by the startup code)
 151  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 152  */
 153 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 154 #define CONFIG_SYS_SDRAM_SIZE           32      /* SDRAM size in MB */
 155 #define CONFIG_SYS_SDRAM_CFG1           0x53722730
 156 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
 157 #define CONFIG_SYS_SDRAM_CTRL           0xE1092000
 158 #define CONFIG_SYS_SDRAM_EMOD           0x40010000
 159 #define CONFIG_SYS_SDRAM_MODE           0x018D0000
 160
 161 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 162 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 163
 164 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 165 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 166
 167 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 168 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 169
 170 /*
 171  * For booting Linux, the board info and command line data
 172  * have to be in the first 8 MB of memory, since this is
 173  * the maximum mapped by the Linux kernel during initialization ??
 174  */
 175 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 176 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 177
 178 /*-----------------------------------------------------------------------
 179  * FLASH organization
 180  */
 181 #define CONFIG_SYS_FLASH_CFI
 182 #ifdef CONFIG_SYS_FLASH_CFI
 183 #       define CONFIG_FLASH_CFI_DRIVER  1
 184 #       define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
 185 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 186 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 187 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 188 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 189 #endif
 190
 191 #ifdef CONFIG_NANDFLASH_SIZE
 192 #       define CONFIG_SYS_MAX_NAND_DEVICE       1
 193 #       define CONFIG_SYS_NAND_BASE             CONFIG_SYS_CS2_BASE
 194 #       define CONFIG_SYS_NAND_SIZE             1
 195 #       define CONFIG_SYS_NAND_BASE_LIST        { CONFIG_SYS_NAND_BASE }
 196 #       define NAND_ALLOW_ERASE_ALL     1
 197 #       define CONFIG_JFFS2_NAND        1
 198 #       define CONFIG_JFFS2_DEV         "nand0"
 199 #       define CONFIG_JFFS2_PART_SIZE   (CONFIG_SYS_CS2_MASK & ~1)
 200 #       define CONFIG_JFFS2_PART_OFFSET 0x00000000
 201 #endif
 202
 203 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 204
 205 /* Configuration for environment
 206  * Environment is embedded in u-boot in the second sector of the flash
 207  */
 208 #define CONFIG_ENV_OFFSET               0x4000
 209 #define CONFIG_ENV_SECT_SIZE    0x2000
 210 #define CONFIG_ENV_IS_IN_FLASH  1
 211
 212 #define LDS_BOARD_TEXT \
 213         . = DEFINED(env_offset) ? env_offset : .; \
 214         common/env_embedded.o (.text*);
 215
 216 /*-----------------------------------------------------------------------
 217  * Cache Configuration
 218  */
 219 #define CONFIG_SYS_CACHELINE_SIZE       16
 220
 221 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 222                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 223 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 224                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 225 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINVA)
 226 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 227                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 228                                          CF_ACR_EN | CF_ACR_SM_ALL)
 229 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_EC | CF_CACR_CINVA | \
 230                                          CF_CACR_DCM_P)
 231
 232 /*-----------------------------------------------------------------------
 233  * Chipselect bank definitions
 234  */
 235 /*
 236  * CS0 - NOR Flash 1, 2, 4, or 8MB
 237  * CS1 - CompactFlash and registers
 238  * CS2 - NAND Flash 16, 32, or 64MB
 239  * CS3 - Available
 240  * CS4 - Available
 241  * CS5 - Available
 242  */
 243 #define CONFIG_SYS_CS0_BASE             0
 244 #define CONFIG_SYS_CS0_MASK             0x007f0001
 245 #define CONFIG_SYS_CS0_CTRL             0x00001fa0
 246
 247 #define CONFIG_SYS_CS1_BASE             0x10000000
 248 #define CONFIG_SYS_CS1_MASK             0x001f0001
 249 #define CONFIG_SYS_CS1_CTRL             0x002A3780
 250
 251 #ifdef CONFIG_NANDFLASH_SIZE
 252 #define CONFIG_SYS_CS2_BASE             0x20000000
 253 #define CONFIG_SYS_CS2_MASK             ((CONFIG_NANDFLASH_SIZE << 20) | 1)
 254 #define CONFIG_SYS_CS2_CTRL             0x00001f60
 255 #endif
 256
 257 #endif                          /* _M5373EVB_H */