include/configs/M54451EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF54451 EVB board.
   3  *
   4  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M54451EVB_H
  15 #define _M54451EVB_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_MCF5445x         /* define processor family */
  22 #define CONFIG_M54451           /* define processor type */
  23 #define CONFIG_M54451EVB        /* M54451EVB board */
  24
  25 #define CONFIG_DISPLAY_BOARDINFO
  26
  27 #define CONFIG_MCFUART
  28 #define CONFIG_SYS_UART_PORT            (0)
  29 #define CONFIG_BAUDRATE         115200
  30
  31 #undef CONFIG_WATCHDOG
  32
  33 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  34
  35 /*
  36  * BOOTP options
  37  */
  38 #define CONFIG_BOOTP_BOOTFILESIZE
  39 #define CONFIG_BOOTP_BOOTPATH
  40 #define CONFIG_BOOTP_GATEWAY
  41 #define CONFIG_BOOTP_HOSTNAME
  42
  43 /* Command line configuration */
  44 #include <config_cmd_default.h>
  45
  46 #define CONFIG_CMD_BOOTD
  47 #define CONFIG_CMD_CACHE
  48 #define CONFIG_CMD_DATE
  49 #define CONFIG_CMD_DHCP
  50 #define CONFIG_CMD_ELF
  51 #define CONFIG_CMD_FLASH
  52 #define CONFIG_CMD_I2C
  53 #undef CONFIG_CMD_JFFS2
  54 #define CONFIG_CMD_MEMORY
  55 #define CONFIG_CMD_MISC
  56 #define CONFIG_CMD_MII
  57 #define CONFIG_CMD_NET
  58 #define CONFIG_CMD_NFS
  59 #define CONFIG_CMD_PING
  60 #define CONFIG_CMD_REGINFO
  61 #define CONFIG_CMD_SPI
  62 #define CONFIG_CMD_SF
  63
  64 #undef CONFIG_CMD_LOADB
  65 #undef CONFIG_CMD_LOADS
  66
  67 /* Network configuration */
  68 #define CONFIG_MCFFEC
  69 #ifdef CONFIG_MCFFEC
  70 #       define CONFIG_MII               1
  71 #       define CONFIG_MII_INIT          1
  72 #       define CONFIG_SYS_DISCOVER_PHY
  73 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  74 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  75
  76 #       define CONFIG_SYS_FEC0_PINMUX   0
  77 #       define CONFIG_SYS_FEC0_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  78 #       define MCFFEC_TOUT_LOOP 50000
  79
  80 #       define CONFIG_BOOTDELAY 1       /* autoboot after 5 seconds */
  81 #       define CONFIG_BOOTARGS          "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)"
  82 #       define CONFIG_ETHADDR           00:e0:0c:bc:e5:60
  83 #       define CONFIG_ETHPRIME          "FEC0"
  84 #       define CONFIG_IPADDR            192.162.1.2
  85 #       define CONFIG_NETMASK           255.255.255.0
  86 #       define CONFIG_SERVERIP          192.162.1.1
  87 #       define CONFIG_GATEWAYIP         192.162.1.1
  88 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
  89
  90 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  91 #       ifndef CONFIG_SYS_DISCOVER_PHY
  92 #               define FECDUPLEX        FULL
  93 #               define FECSPEED         _100BASET
  94 #       else
  95 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  96 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  97 #               endif
  98 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  99 #endif
 100
 101 #define CONFIG_HOSTNAME         M54451EVB
 102 #ifdef CONFIG_SYS_STMICRO_BOOT
 103 /* ST Micro serial flash */
 104 #define CONFIG_SYS_LOAD_ADDR2           0x40010007
 105 #define CONFIG_EXTRA_ENV_SETTINGS               \
 106         "netdev=eth0\0"                         \
 107         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 108         "loadaddr=0x40010000\0"                 \
 109         "sbfhdr=sbfhdr.bin\0"                   \
 110         "uboot=u-boot.bin\0"                    \
 111         "load=tftp ${loadaddr} ${sbfhdr};"      \
 112         "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"       \
 113         "upd=run load; run prog\0"              \
 114         "prog=sf probe 0:1 1000000 3;"          \
 115         "sf erase 0 30000;"                     \
 116         "sf write ${loadaddr} 0 30000;"         \
 117         "save\0"                                \
 118         ""
 119 #else
 120 #define CONFIG_SYS_UBOOT_END    0x3FFFF
 121 #define CONFIG_EXTRA_ENV_SETTINGS               \
 122         "netdev=eth0\0"                         \
 123         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 124         "loadaddr=40010000\0"                   \
 125         "u-boot=u-boot.bin\0"                   \
 126         "load=tftp ${loadaddr) ${u-boot}\0"     \
 127         "upd=run load; run prog\0"              \
 128         "prog=prot off 0 " __stringify(CONFIG_SYS_UBOOT_END)    \
 129         "; era 0 " __stringify(CONFIG_SYS_UBOOT_END) " ;"       \
 130         "cp.b ${loadaddr} 0 ${filesize};"       \
 131         "save\0"                                \
 132         ""
 133 #endif
 134
 135 /* Realtime clock */
 136 #define CONFIG_MCFRTC
 137 #undef RTC_DEBUG
 138 #define CONFIG_SYS_RTC_OSCILLATOR       (32 * CONFIG_SYS_HZ)
 139
 140 /* Timer */
 141 #define CONFIG_MCFTMR
 142 #undef CONFIG_MCFPIT
 143
 144 /* I2c */
 145 #define CONFIG_SYS_I2C
 146 #define CONFIG_SYS_I2C_FSL
 147 #define CONFIG_SYS_FSL_I2C_SPEED        80000
 148 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 149 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
 150 #define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
 151
 152 /* DSPI and Serial Flash */
 153 #define CONFIG_CF_SPI
 154 #define CONFIG_CF_DSPI
 155 #define CONFIG_SERIAL_FLASH
 156 #define CONFIG_HARD_SPI
 157 #define CONFIG_SYS_SBFHDR_SIZE          0x7
 158 #ifdef CONFIG_CMD_SPI
 159 #       define CONFIG_SPI_FLASH
 160 #       define CONFIG_SPI_FLASH_STMICRO
 161
 162 #       define CONFIG_SYS_DSPI_CTAR0    (DSPI_CTAR_TRSZ(7) | \
 163                                          DSPI_CTAR_PCSSCK_1CLK | \
 164                                          DSPI_CTAR_PASC(0) | \
 165                                          DSPI_CTAR_PDT(0) | \
 166                                          DSPI_CTAR_CSSCK(0) | \
 167                                          DSPI_CTAR_ASC(0) | \
 168                                          DSPI_CTAR_DT(1))
 169 #       define CONFIG_SYS_DSPI_CTAR1    (CONFIG_SYS_DSPI_CTAR0)
 170 #       define CONFIG_SYS_DSPI_CTAR2    (CONFIG_SYS_DSPI_CTAR0)
 171 #endif
 172
 173 /* Input, PCI, Flexbus, and VCO */
 174 #define CONFIG_EXTRA_CLOCK
 175
 176 #define CONFIG_PRAM                     2048    /* 2048 KB */
 177
 178 #define CONFIG_SYS_PROMPT               "-> "
 179 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 180
 181 #if defined(CONFIG_CMD_KGDB)
 182 #define CONFIG_SYS_CBSIZE                       1024    /* Console I/O Buffer Size */
 183 #else
 184 #define CONFIG_SYS_CBSIZE                       256     /* Console I/O Buffer Size */
 185 #endif
 186 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 187 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 188 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 189
 190 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x10000)
 191
 192 #define CONFIG_SYS_MBAR                 0xFC000000
 193
 194 /*
 195  * Low Level Configuration Settings
 196  * (address mappings, register initial values, etc.)
 197  * You should know what you are doing if you make changes here.
 198  */
 199
 200 /*-----------------------------------------------------------------------
 201  * Definitions for initial stack pointer and data area (in DPRAM)
 202  */
 203 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 204 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000  /* Size of used area in internal SRAM */
 205 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 206 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
 207 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 208 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 209
 210 /*-----------------------------------------------------------------------
 211  * Start addresses for the final memory configuration
 212  * (Set up by the startup code)
 213  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 214  */
 215 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 216 #define CONFIG_SYS_SDRAM_SIZE           128     /* SDRAM size in MB */
 217 #define CONFIG_SYS_SDRAM_CFG1           0x33633F30
 218 #define CONFIG_SYS_SDRAM_CFG2           0x57670000
 219 #define CONFIG_SYS_SDRAM_CTRL           0xE20D2C00
 220 #define CONFIG_SYS_SDRAM_EMOD           0x80810000
 221 #define CONFIG_SYS_SDRAM_MODE           0x008D0000
 222 #define CONFIG_SYS_SDRAM_DRV_STRENGTH   0x44
 223
 224 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 225 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 226
 227 #ifdef CONFIG_CF_SBF
 228 #       define CONFIG_SERIAL_BOOT
 229 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_TEXT_BASE + 0x400)
 230 #else
 231 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_FLASH_BASE + 0x400)
 232 #endif
 233 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 234 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 235
 236 /* Reserve 256 kB for malloc() */
 237 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 238 /*
 239  * For booting Linux, the board info and command line data
 240  * have to be in the first 8 MB of memory, since this is
 241  * the maximum mapped by the Linux kernel during initialization ??
 242  */
 243 /* Initial Memory map for Linux */
 244 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 245
 246 /* Configuration for environment
 247  * Environment is not embedded in u-boot. First time runing may have env
 248  * crc error warning if there is no correct environment on the flash.
 249  */
 250 #if defined(CONFIG_SYS_STMICRO_BOOT)
 251 #       define CONFIG_ENV_IS_IN_SPI_FLASH       1
 252 #       define CONFIG_ENV_SPI_CS                1
 253 #       define CONFIG_ENV_OFFSET                0x20000
 254 #       define CONFIG_ENV_SIZE          0x2000
 255 #       define CONFIG_ENV_SECT_SIZE     0x10000
 256 #else
 257 #       define CONFIG_ENV_IS_IN_FLASH   1
 258 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 259 #       define CONFIG_ENV_SIZE          0x2000
 260 #       define CONFIG_ENV_SECT_SIZE     0x20000
 261 #endif
 262 #undef CONFIG_ENV_OVERWRITE
 263
 264 /* FLASH organization */
 265 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 266
 267 #define CONFIG_SYS_FLASH_CFI
 268 #ifdef CONFIG_SYS_FLASH_CFI
 269
 270 #       define CONFIG_FLASH_CFI_DRIVER  1
 271 #       define CONFIG_SYS_FLASH_USE_BUFFER_WRITE        1
 272 #       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 273 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 274 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 275 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 276 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 277 #       define CONFIG_SYS_FLASH_CHECKSUM
 278 #       define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_CS0_BASE }
 279
 280 #endif
 281
 282 /*
 283  * This is setting for JFFS2 support in u-boot.
 284  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 285  */
 286 #ifdef CONFIG_CMD_JFFS2
 287 #       define CONFIG_JFFS2_DEV         "nor0"
 288 #       define CONFIG_JFFS2_PART_SIZE   0x01000000
 289 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
 290 #endif
 291
 292 /* Cache Configuration */
 293 #define CONFIG_SYS_CACHELINE_SIZE               16
 294
 295 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 296                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 297 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 298                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 299 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_BCINVA + CF_CACR_ICINVA)
 300 #define CONFIG_SYS_DCACHE_INV           (CF_CACR_DCINVA)
 301 #define CONFIG_SYS_CACHE_ACR2           (CONFIG_SYS_SDRAM_BASE | \
 302                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 303                                          CF_ACR_EN | CF_ACR_SM_ALL)
 304 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_BEC | CF_CACR_IEC | \
 305                                          CF_CACR_ICINVA | CF_CACR_EUSP)
 306 #define CONFIG_SYS_CACHE_DCACR          ((CONFIG_SYS_CACHE_ICACR | \
 307                                          CF_CACR_DEC | CF_CACR_DDCM_P | \
 308                                          CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
 309
 310 /*-----------------------------------------------------------------------
 311  * Memory bank definitions
 312  */
 313 /*
 314  * CS0 - NOR Flash 16MB
 315  * CS1 - Available
 316  * CS2 - Available
 317  * CS3 - Available
 318  * CS4 - Available
 319  * CS5 - Available
 320  */
 321
 322  /* Flash */
 323 #define CONFIG_SYS_CS0_BASE             0x00000000
 324 #define CONFIG_SYS_CS0_MASK             0x00FF0001
 325 #define CONFIG_SYS_CS0_CTRL             0x00004D80
 326
 327 #define CONFIG_SYS_SPANSION_BASE        CONFIG_SYS_CS0_BASE
 328
 329 #endif                          /* _M54451EVB_H */