include/configs/M54455EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF54455 EVB board.
   3  *
   4  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M54455EVB_H
  15 #define _M54455EVB_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_M54455EVB        /* M54455EVB board */
  22
  23 #define CONFIG_MCFUART
  24 #define CONFIG_SYS_UART_PORT            (0)
  25
  26 #undef CONFIG_WATCHDOG
  27
  28 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  29
  30 /*
  31  * BOOTP options
  32  */
  33 #define CONFIG_BOOTP_BOOTFILESIZE
  34 #define CONFIG_BOOTP_BOOTPATH
  35 #define CONFIG_BOOTP_GATEWAY
  36 #define CONFIG_BOOTP_HOSTNAME
  37
  38 /* Command line configuration */
  39 #undef CONFIG_CMD_PCI
  40
  41 /* Network configuration */
  42 #define CONFIG_MCFFEC
  43 #ifdef CONFIG_MCFFEC
  44 #       define CONFIG_MII               1
  45 #       define CONFIG_MII_INIT          1
  46 #       define CONFIG_SYS_DISCOVER_PHY
  47 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  48 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  49
  50 #       define CONFIG_SYS_FEC0_PINMUX   0
  51 #       define CONFIG_SYS_FEC1_PINMUX   0
  52 #       define CONFIG_SYS_FEC0_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  53 #       define CONFIG_SYS_FEC1_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  54 #       define MCFFEC_TOUT_LOOP 50000
  55 #       define CONFIG_HAS_ETH1
  56
  57 #       define CONFIG_BOOTARGS          "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
  58 #       define CONFIG_ETHPRIME          "FEC0"
  59 #       define CONFIG_IPADDR            192.162.1.2
  60 #       define CONFIG_NETMASK           255.255.255.0
  61 #       define CONFIG_SERVERIP          192.162.1.1
  62 #       define CONFIG_GATEWAYIP         192.162.1.1
  63
  64 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  65 #       ifndef CONFIG_SYS_DISCOVER_PHY
  66 #               define FECDUPLEX        FULL
  67 #               define FECSPEED         _100BASET
  68 #       else
  69 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  70 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  71 #               endif
  72 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  73 #endif
  74
  75 #define CONFIG_HOSTNAME         M54455EVB
  76 #ifdef CONFIG_SYS_STMICRO_BOOT
  77 /* ST Micro serial flash */
  78 #define CONFIG_SYS_LOAD_ADDR2           0x40010013
  79 #define CONFIG_EXTRA_ENV_SETTINGS               \
  80         "netdev=eth0\0"                         \
  81         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
  82         "loadaddr=0x40010000\0"                 \
  83         "sbfhdr=sbfhdr.bin\0"                   \
  84         "uboot=u-boot.bin\0"                    \
  85         "load=tftp ${loadaddr} ${sbfhdr};"      \
  86         "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"       \
  87         "upd=run load; run prog\0"              \
  88         "prog=sf probe 0:1 1000000 3;"          \
  89         "sf erase 0 30000;"                     \
  90         "sf write ${loadaddr} 0 0x30000;"       \
  91         "save\0"                                \
  92         ""
  93 #else
  94 /* Atmel and Intel */
  95 #ifdef CONFIG_SYS_ATMEL_BOOT
  96 #       define CONFIG_SYS_UBOOT_END     0x0403FFFF
  97 #elif defined(CONFIG_SYS_INTEL_BOOT)
  98 #       define CONFIG_SYS_UBOOT_END     0x3FFFF
  99 #endif
 100 #define CONFIG_EXTRA_ENV_SETTINGS               \
 101         "netdev=eth0\0"                         \
 102         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 103         "loadaddr=0x40010000\0"                 \
 104         "uboot=u-boot.bin\0"                    \
 105         "load=tftp ${loadaddr} ${uboot}\0"      \
 106         "upd=run load; run prog\0"              \
 107         "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)     \
 108         " " __stringify(CONFIG_SYS_UBOOT_END) ";"               \
 109         "era " __stringify(CONFIG_SYS_FLASH_BASE) " "           \
 110         __stringify(CONFIG_SYS_UBOOT_END) ";"                   \
 111         "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)  \
 112         " ${filesize}; save\0"                  \
 113         ""
 114 #endif
 115
 116 /* ATA configuration */
 117 #define CONFIG_IDE_RESET        1
 118 #define CONFIG_IDE_PREINIT      1
 119 #define CONFIG_ATAPI
 120 #undef CONFIG_LBA48
 121
 122 #define CONFIG_SYS_IDE_MAXBUS           1
 123 #define CONFIG_SYS_IDE_MAXDEVICE        2
 124
 125 #define CONFIG_SYS_ATA_BASE_ADDR        0x90000000
 126 #define CONFIG_SYS_ATA_IDE0_OFFSET      0
 127
 128 #define CONFIG_SYS_ATA_DATA_OFFSET      0xA0    /* Offset for data I/O                            */
 129 #define CONFIG_SYS_ATA_REG_OFFSET       0xA0    /* Offset for normal register accesses */
 130 #define CONFIG_SYS_ATA_ALT_OFFSET       0xC0    /* Offset for alternate registers           */
 131 #define CONFIG_SYS_ATA_STRIDE           4       /* Interval between registers                 */
 132
 133 /* Realtime clock */
 134 #define CONFIG_MCFRTC
 135 #undef RTC_DEBUG
 136 #define CONFIG_SYS_RTC_OSCILLATOR       (32 * CONFIG_SYS_HZ)
 137
 138 /* Timer */
 139 #define CONFIG_MCFTMR
 140 #undef CONFIG_MCFPIT
 141
 142 /* I2c */
 143 #define CONFIG_SYS_I2C
 144 #define CONFIG_SYS_I2C_FSL
 145 #define CONFIG_SYS_FSL_I2C_SPEED        80000
 146 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 147 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
 148 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
 149
 150 /* DSPI and Serial Flash */
 151 #define CONFIG_CF_SPI
 152 #define CONFIG_CF_DSPI
 153 #define CONFIG_HARD_SPI
 154 #define CONFIG_SYS_SBFHDR_SIZE          0x13
 155 #ifdef CONFIG_CMD_SPI
 156
 157 #       define CONFIG_SYS_DSPI_CTAR0            (DSPI_CTAR_TRSZ(7) | \
 158                                          DSPI_CTAR_PCSSCK_1CLK | \
 159                                          DSPI_CTAR_PASC(0) | \
 160                                          DSPI_CTAR_PDT(0) | \
 161                                          DSPI_CTAR_CSSCK(0) | \
 162                                          DSPI_CTAR_ASC(0) | \
 163                                          DSPI_CTAR_DT(1))
 164 #endif
 165
 166 /* PCI */
 167 #ifdef CONFIG_CMD_PCI
 168 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
 169
 170 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE  4
 171
 172 #define CONFIG_SYS_PCI_MEM_BUS          0xA0000000
 173 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS
 174 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
 175
 176 #define CONFIG_SYS_PCI_IO_BUS           0xB1000000
 177 #define CONFIG_SYS_PCI_IO_PHYS          CONFIG_SYS_PCI_IO_BUS
 178 #define CONFIG_SYS_PCI_IO_SIZE          0x01000000
 179
 180 #define CONFIG_SYS_PCI_CFG_BUS          0xB0000000
 181 #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS
 182 #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000
 183 #endif
 184
 185 /* FPGA - Spartan 2 */
 186 /* experiment
 187 #define CONFIG_FPGA
 188 #define CONFIG_FPGA_COUNT       1
 189 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 190 #define CONFIG_SYS_FPGA_CHECK_CTRLC
 191 */
 192
 193 /* Input, PCI, Flexbus, and VCO */
 194 #define CONFIG_EXTRA_CLOCK
 195
 196 #define CONFIG_PRAM             2048    /* 2048 KB */
 197
 198 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 199
 200 #if defined(CONFIG_CMD_KGDB)
 201 #define CONFIG_SYS_CBSIZE                       1024    /* Console I/O Buffer Size */
 202 #else
 203 #define CONFIG_SYS_CBSIZE                       256     /* Console I/O Buffer Size */
 204 #endif
 205 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 206 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 207 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 208
 209 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x10000)
 210
 211 #define CONFIG_SYS_MBAR         0xFC000000
 212
 213 /*
 214  * Low Level Configuration Settings
 215  * (address mappings, register initial values, etc.)
 216  * You should know what you are doing if you make changes here.
 217  */
 218
 219 /*-----------------------------------------------------------------------
 220  * Definitions for initial stack pointer and data area (in DPRAM)
 221  */
 222 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 223 #define CONFIG_SYS_INIT_RAM_SIZE                0x8000  /* Size of used area in internal SRAM */
 224 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 225 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
 226 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 227 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 228
 229 /*-----------------------------------------------------------------------
 230  * Start addresses for the final memory configuration
 231  * (Set up by the startup code)
 232  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 233  */
 234 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 235 #define CONFIG_SYS_SDRAM_BASE1          0x48000000
 236 #define CONFIG_SYS_SDRAM_SIZE           256     /* SDRAM size in MB */
 237 #define CONFIG_SYS_SDRAM_CFG1           0x65311610
 238 #define CONFIG_SYS_SDRAM_CFG2           0x59670000
 239 #define CONFIG_SYS_SDRAM_CTRL           0xEA0B2000
 240 #define CONFIG_SYS_SDRAM_EMOD           0x40010000
 241 #define CONFIG_SYS_SDRAM_MODE           0x00010033
 242 #define CONFIG_SYS_SDRAM_DRV_STRENGTH   0xAA
 243
 244 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 245 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 246
 247 #ifdef CONFIG_CF_SBF
 248 #       define CONFIG_SERIAL_BOOT
 249 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_TEXT_BASE + 0x400)
 250 #else
 251 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_FLASH_BASE + 0x400)
 252 #endif
 253 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 254 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 255
 256 /* Reserve 256 kB for malloc() */
 257 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 258
 259 /*
 260  * For booting Linux, the board info and command line data
 261  * have to be in the first 8 MB of memory, since this is
 262  * the maximum mapped by the Linux kernel during initialization ??
 263  */
 264 /* Initial Memory map for Linux */
 265 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 266
 267 /*
 268  * Configuration for environment
 269  * Environment is not embedded in u-boot. First time runing may have env
 270  * crc error warning if there is no correct environment on the flash.
 271  */
 272 #ifdef CONFIG_CF_SBF
 273 #       define CONFIG_ENV_IS_IN_SPI_FLASH
 274 #       define CONFIG_ENV_SPI_CS                1
 275 #endif
 276 #undef CONFIG_ENV_OVERWRITE
 277
 278 /*-----------------------------------------------------------------------
 279  * FLASH organization
 280  */
 281 #ifdef CONFIG_SYS_STMICRO_BOOT
 282 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 283 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS1_BASE
 284 #       define CONFIG_ENV_OFFSET                0x30000
 285 #       define CONFIG_ENV_SIZE          0x2000
 286 #       define CONFIG_ENV_SECT_SIZE     0x10000
 287 #endif
 288 #ifdef CONFIG_SYS_ATMEL_BOOT
 289 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 290 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS0_BASE
 291 #       define CONFIG_SYS_FLASH1_BASE           CONFIG_SYS_CS1_BASE
 292 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 293 #       define CONFIG_ENV_SIZE          0x2000
 294 #       define CONFIG_ENV_SECT_SIZE     0x10000
 295 #endif
 296 #ifdef CONFIG_SYS_INTEL_BOOT
 297 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 298 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS0_BASE
 299 #       define CONFIG_SYS_FLASH1_BASE           CONFIG_SYS_CS1_BASE
 300 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 301 #       define CONFIG_ENV_SIZE          0x2000
 302 #       define CONFIG_ENV_SECT_SIZE     0x20000
 303 #endif
 304
 305 #define CONFIG_SYS_FLASH_CFI
 306 #ifdef CONFIG_SYS_FLASH_CFI
 307
 308 #       define CONFIG_FLASH_CFI_DRIVER  1
 309 #       define CONFIG_SYS_FLASH_USE_BUFFER_WRITE        1
 310 #       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 311 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_8BIT
 312 #       define CONFIG_SYS_MAX_FLASH_BANKS       2       /* max number of memory banks */
 313 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 314 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 315 #       define CONFIG_SYS_FLASH_CHECKSUM
 316 #       define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
 317 #       define CONFIG_FLASH_CFI_LEGACY
 318
 319 #ifdef CONFIG_FLASH_CFI_LEGACY
 320 #       define CONFIG_SYS_ATMEL_REGION          4
 321 #       define CONFIG_SYS_ATMEL_TOTALSECT       11
 322 #       define CONFIG_SYS_ATMEL_SECT            {1, 2, 1, 7}
 323 #       define CONFIG_SYS_ATMEL_SECTSZ          {0x4000, 0x2000, 0x8000, 0x10000}
 324 #endif
 325 #endif
 326
 327 /*
 328  * This is setting for JFFS2 support in u-boot.
 329  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 330  */
 331 #ifdef CONFIG_CMD_JFFS2
 332 #ifdef CF_STMICRO_BOOT
 333 #       define CONFIG_JFFS2_DEV         "nor1"
 334 #       define CONFIG_JFFS2_PART_SIZE   0x01000000
 335 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000)
 336 #endif
 337 #ifdef CONFIG_SYS_ATMEL_BOOT
 338 #       define CONFIG_JFFS2_DEV         "nor1"
 339 #       define CONFIG_JFFS2_PART_SIZE   0x01000000
 340 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000)
 341 #endif
 342 #ifdef CONFIG_SYS_INTEL_BOOT
 343 #       define CONFIG_JFFS2_DEV         "nor0"
 344 #       define CONFIG_JFFS2_PART_SIZE   (0x01000000 - 0x500000)
 345 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
 346 #endif
 347 #endif
 348
 349 /*-----------------------------------------------------------------------
 350  * Cache Configuration
 351  */
 352 #define CONFIG_SYS_CACHELINE_SIZE               16
 353
 354 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 355                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 356 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 357                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 358 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_BCINVA + CF_CACR_ICINVA)
 359 #define CONFIG_SYS_DCACHE_INV           (CF_CACR_DCINVA)
 360 #define CONFIG_SYS_CACHE_ACR2           (CONFIG_SYS_SDRAM_BASE | \
 361                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 362                                          CF_ACR_EN | CF_ACR_SM_ALL)
 363 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_BEC | CF_CACR_IEC | \
 364                                          CF_CACR_ICINVA | CF_CACR_EUSP)
 365 #define CONFIG_SYS_CACHE_DCACR          ((CONFIG_SYS_CACHE_ICACR | \
 366                                          CF_CACR_DEC | CF_CACR_DDCM_P | \
 367                                          CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
 368
 369 /*-----------------------------------------------------------------------
 370  * Memory bank definitions
 371  */
 372 /*
 373  * CS0 - NOR Flash 1, 2, 4, or 8MB
 374  * CS1 - CompactFlash and registers
 375  * CS2 - CPLD
 376  * CS3 - FPGA
 377  * CS4 - Available
 378  * CS5 - Available
 379  */
 380
 381 #if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT)
 382  /* Atmel Flash */
 383 #define CONFIG_SYS_CS0_BASE             0x04000000
 384 #define CONFIG_SYS_CS0_MASK             0x00070001
 385 #define CONFIG_SYS_CS0_CTRL             0x00001140
 386 /* Intel Flash */
 387 #define CONFIG_SYS_CS1_BASE             0x00000000
 388 #define CONFIG_SYS_CS1_MASK             0x01FF0001
 389 #define CONFIG_SYS_CS1_CTRL             0x00000D60
 390
 391 #define CONFIG_SYS_ATMEL_BASE           CONFIG_SYS_CS0_BASE
 392 #else
 393 /* Intel Flash */
 394 #define CONFIG_SYS_CS0_BASE             0x00000000
 395 #define CONFIG_SYS_CS0_MASK             0x01FF0001
 396 #define CONFIG_SYS_CS0_CTRL             0x00000D60
 397  /* Atmel Flash */
 398 #define CONFIG_SYS_CS1_BASE             0x04000000
 399 #define CONFIG_SYS_CS1_MASK             0x00070001
 400 #define CONFIG_SYS_CS1_CTRL             0x00001140
 401
 402 #define CONFIG_SYS_ATMEL_BASE           CONFIG_SYS_CS1_BASE
 403 #endif
 404
 405 /* CPLD */
 406 #define CONFIG_SYS_CS2_BASE             0x08000000
 407 #define CONFIG_SYS_CS2_MASK             0x00070001
 408 #define CONFIG_SYS_CS2_CTRL             0x003f1140
 409
 410 /* FPGA */
 411 #define CONFIG_SYS_CS3_BASE             0x09000000
 412 #define CONFIG_SYS_CS3_MASK             0x00070001
 413 #define CONFIG_SYS_CS3_CTRL             0x00000020
 414
 415 #endif                          /* _M54455EVB_H */