include/configs/M54455EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF54455 EVB board.
   3  *
   4  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M54455EVB_H
  15 #define _M54455EVB_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_M54455EVB        /* M54455EVB board */
  22
  23 #define CONFIG_MCFUART
  24 #define CONFIG_SYS_UART_PORT            (0)
  25
  26 #undef CONFIG_WATCHDOG
  27
  28 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  29
  30 /*
  31  * BOOTP options
  32  */
  33 #define CONFIG_BOOTP_BOOTFILESIZE
  34 #define CONFIG_BOOTP_BOOTPATH
  35 #define CONFIG_BOOTP_GATEWAY
  36 #define CONFIG_BOOTP_HOSTNAME
  37
  38 /* Command line configuration */
  39 #define CONFIG_CMD_DATE
  40 #define CONFIG_CMD_IDE
  41 #define CONFIG_CMD_JFFS2
  42 #undef CONFIG_CMD_PCI
  43 #define CONFIG_CMD_REGINFO
  44
  45 /* Network configuration */
  46 #define CONFIG_MCFFEC
  47 #ifdef CONFIG_MCFFEC
  48 #       define CONFIG_MII               1
  49 #       define CONFIG_MII_INIT          1
  50 #       define CONFIG_SYS_DISCOVER_PHY
  51 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  52 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  53
  54 #       define CONFIG_SYS_FEC0_PINMUX   0
  55 #       define CONFIG_SYS_FEC1_PINMUX   0
  56 #       define CONFIG_SYS_FEC0_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  57 #       define CONFIG_SYS_FEC1_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  58 #       define MCFFEC_TOUT_LOOP 50000
  59 #       define CONFIG_HAS_ETH1
  60
  61 #       define CONFIG_BOOTARGS          "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
  62 #       define CONFIG_ETHPRIME          "FEC0"
  63 #       define CONFIG_IPADDR            192.162.1.2
  64 #       define CONFIG_NETMASK           255.255.255.0
  65 #       define CONFIG_SERVERIP          192.162.1.1
  66 #       define CONFIG_GATEWAYIP         192.162.1.1
  67
  68 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  69 #       ifndef CONFIG_SYS_DISCOVER_PHY
  70 #               define FECDUPLEX        FULL
  71 #               define FECSPEED         _100BASET
  72 #       else
  73 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  74 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  75 #               endif
  76 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  77 #endif
  78
  79 #define CONFIG_HOSTNAME         M54455EVB
  80 #ifdef CONFIG_SYS_STMICRO_BOOT
  81 /* ST Micro serial flash */
  82 #define CONFIG_SYS_LOAD_ADDR2           0x40010013
  83 #define CONFIG_EXTRA_ENV_SETTINGS               \
  84         "netdev=eth0\0"                         \
  85         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
  86         "loadaddr=0x40010000\0"                 \
  87         "sbfhdr=sbfhdr.bin\0"                   \
  88         "uboot=u-boot.bin\0"                    \
  89         "load=tftp ${loadaddr} ${sbfhdr};"      \
  90         "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"       \
  91         "upd=run load; run prog\0"              \
  92         "prog=sf probe 0:1 1000000 3;"          \
  93         "sf erase 0 30000;"                     \
  94         "sf write ${loadaddr} 0 0x30000;"       \
  95         "save\0"                                \
  96         ""
  97 #else
  98 /* Atmel and Intel */
  99 #ifdef CONFIG_SYS_ATMEL_BOOT
 100 #       define CONFIG_SYS_UBOOT_END     0x0403FFFF
 101 #elif defined(CONFIG_SYS_INTEL_BOOT)
 102 #       define CONFIG_SYS_UBOOT_END     0x3FFFF
 103 #endif
 104 #define CONFIG_EXTRA_ENV_SETTINGS               \
 105         "netdev=eth0\0"                         \
 106         "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"     \
 107         "loadaddr=0x40010000\0"                 \
 108         "uboot=u-boot.bin\0"                    \
 109         "load=tftp ${loadaddr} ${uboot}\0"      \
 110         "upd=run load; run prog\0"              \
 111         "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)     \
 112         " " __stringify(CONFIG_SYS_UBOOT_END) ";"               \
 113         "era " __stringify(CONFIG_SYS_FLASH_BASE) " "           \
 114         __stringify(CONFIG_SYS_UBOOT_END) ";"                   \
 115         "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)  \
 116         " ${filesize}; save\0"                  \
 117         ""
 118 #endif
 119
 120 /* ATA configuration */
 121 #define CONFIG_IDE_RESET        1
 122 #define CONFIG_IDE_PREINIT      1
 123 #define CONFIG_ATAPI
 124 #undef CONFIG_LBA48
 125
 126 #define CONFIG_SYS_IDE_MAXBUS           1
 127 #define CONFIG_SYS_IDE_MAXDEVICE        2
 128
 129 #define CONFIG_SYS_ATA_BASE_ADDR        0x90000000
 130 #define CONFIG_SYS_ATA_IDE0_OFFSET      0
 131
 132 #define CONFIG_SYS_ATA_DATA_OFFSET      0xA0    /* Offset for data I/O                            */
 133 #define CONFIG_SYS_ATA_REG_OFFSET       0xA0    /* Offset for normal register accesses */
 134 #define CONFIG_SYS_ATA_ALT_OFFSET       0xC0    /* Offset for alternate registers           */
 135 #define CONFIG_SYS_ATA_STRIDE           4       /* Interval between registers                 */
 136
 137 /* Realtime clock */
 138 #define CONFIG_MCFRTC
 139 #undef RTC_DEBUG
 140 #define CONFIG_SYS_RTC_OSCILLATOR       (32 * CONFIG_SYS_HZ)
 141
 142 /* Timer */
 143 #define CONFIG_MCFTMR
 144 #undef CONFIG_MCFPIT
 145
 146 /* I2c */
 147 #define CONFIG_SYS_I2C
 148 #define CONFIG_SYS_I2C_FSL
 149 #define CONFIG_SYS_FSL_I2C_SPEED        80000
 150 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 151 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
 152 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
 153
 154 /* DSPI and Serial Flash */
 155 #define CONFIG_CF_SPI
 156 #define CONFIG_CF_DSPI
 157 #define CONFIG_HARD_SPI
 158 #define CONFIG_SYS_SBFHDR_SIZE          0x13
 159 #ifdef CONFIG_CMD_SPI
 160
 161 #       define CONFIG_SYS_DSPI_CTAR0            (DSPI_CTAR_TRSZ(7) | \
 162                                          DSPI_CTAR_PCSSCK_1CLK | \
 163                                          DSPI_CTAR_PASC(0) | \
 164                                          DSPI_CTAR_PDT(0) | \
 165                                          DSPI_CTAR_CSSCK(0) | \
 166                                          DSPI_CTAR_ASC(0) | \
 167                                          DSPI_CTAR_DT(1))
 168 #endif
 169
 170 /* PCI */
 171 #ifdef CONFIG_CMD_PCI
 172 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
 173
 174 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE  4
 175
 176 #define CONFIG_SYS_PCI_MEM_BUS          0xA0000000
 177 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS
 178 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
 179
 180 #define CONFIG_SYS_PCI_IO_BUS           0xB1000000
 181 #define CONFIG_SYS_PCI_IO_PHYS          CONFIG_SYS_PCI_IO_BUS
 182 #define CONFIG_SYS_PCI_IO_SIZE          0x01000000
 183
 184 #define CONFIG_SYS_PCI_CFG_BUS          0xB0000000
 185 #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS
 186 #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000
 187 #endif
 188
 189 /* FPGA - Spartan 2 */
 190 /* experiment
 191 #define CONFIG_FPGA
 192 #define CONFIG_FPGA_COUNT       1
 193 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 194 #define CONFIG_SYS_FPGA_CHECK_CTRLC
 195 */
 196
 197 /* Input, PCI, Flexbus, and VCO */
 198 #define CONFIG_EXTRA_CLOCK
 199
 200 #define CONFIG_PRAM             2048    /* 2048 KB */
 201
 202 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 203
 204 #if defined(CONFIG_CMD_KGDB)
 205 #define CONFIG_SYS_CBSIZE                       1024    /* Console I/O Buffer Size */
 206 #else
 207 #define CONFIG_SYS_CBSIZE                       256     /* Console I/O Buffer Size */
 208 #endif
 209 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 210 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 211 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 212
 213 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x10000)
 214
 215 #define CONFIG_SYS_MBAR         0xFC000000
 216
 217 /*
 218  * Low Level Configuration Settings
 219  * (address mappings, register initial values, etc.)
 220  * You should know what you are doing if you make changes here.
 221  */
 222
 223 /*-----------------------------------------------------------------------
 224  * Definitions for initial stack pointer and data area (in DPRAM)
 225  */
 226 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 227 #define CONFIG_SYS_INIT_RAM_SIZE                0x8000  /* Size of used area in internal SRAM */
 228 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 229 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
 230 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 231 #define CONFIG_SYS_SBFHDR_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - 32)
 232
 233 /*-----------------------------------------------------------------------
 234  * Start addresses for the final memory configuration
 235  * (Set up by the startup code)
 236  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 237  */
 238 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 239 #define CONFIG_SYS_SDRAM_BASE1          0x48000000
 240 #define CONFIG_SYS_SDRAM_SIZE           256     /* SDRAM size in MB */
 241 #define CONFIG_SYS_SDRAM_CFG1           0x65311610
 242 #define CONFIG_SYS_SDRAM_CFG2           0x59670000
 243 #define CONFIG_SYS_SDRAM_CTRL           0xEA0B2000
 244 #define CONFIG_SYS_SDRAM_EMOD           0x40010000
 245 #define CONFIG_SYS_SDRAM_MODE           0x00010033
 246 #define CONFIG_SYS_SDRAM_DRV_STRENGTH   0xAA
 247
 248 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 249 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 250
 251 #ifdef CONFIG_CF_SBF
 252 #       define CONFIG_SERIAL_BOOT
 253 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_TEXT_BASE + 0x400)
 254 #else
 255 #       define CONFIG_SYS_MONITOR_BASE  (CONFIG_SYS_FLASH_BASE + 0x400)
 256 #endif
 257 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 258 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 259
 260 /* Reserve 256 kB for malloc() */
 261 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 262
 263 /*
 264  * For booting Linux, the board info and command line data
 265  * have to be in the first 8 MB of memory, since this is
 266  * the maximum mapped by the Linux kernel during initialization ??
 267  */
 268 /* Initial Memory map for Linux */
 269 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 270
 271 /*
 272  * Configuration for environment
 273  * Environment is not embedded in u-boot. First time runing may have env
 274  * crc error warning if there is no correct environment on the flash.
 275  */
 276 #ifdef CONFIG_CF_SBF
 277 #       define CONFIG_ENV_IS_IN_SPI_FLASH
 278 #       define CONFIG_ENV_SPI_CS                1
 279 #else
 280 #       define CONFIG_ENV_IS_IN_FLASH   1
 281 #endif
 282 #undef CONFIG_ENV_OVERWRITE
 283
 284 /*-----------------------------------------------------------------------
 285  * FLASH organization
 286  */
 287 #ifdef CONFIG_SYS_STMICRO_BOOT
 288 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 289 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS1_BASE
 290 #       define CONFIG_ENV_OFFSET                0x30000
 291 #       define CONFIG_ENV_SIZE          0x2000
 292 #       define CONFIG_ENV_SECT_SIZE     0x10000
 293 #endif
 294 #ifdef CONFIG_SYS_ATMEL_BOOT
 295 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 296 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS0_BASE
 297 #       define CONFIG_SYS_FLASH1_BASE           CONFIG_SYS_CS1_BASE
 298 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 299 #       define CONFIG_ENV_SIZE          0x2000
 300 #       define CONFIG_ENV_SECT_SIZE     0x10000
 301 #endif
 302 #ifdef CONFIG_SYS_INTEL_BOOT
 303 #       define CONFIG_SYS_FLASH_BASE            CONFIG_SYS_CS0_BASE
 304 #       define CONFIG_SYS_FLASH0_BASE           CONFIG_SYS_CS0_BASE
 305 #       define CONFIG_SYS_FLASH1_BASE           CONFIG_SYS_CS1_BASE
 306 #       define CONFIG_ENV_ADDR          (CONFIG_SYS_FLASH_BASE + 0x40000)
 307 #       define CONFIG_ENV_SIZE          0x2000
 308 #       define CONFIG_ENV_SECT_SIZE     0x20000
 309 #endif
 310
 311 #define CONFIG_SYS_FLASH_CFI
 312 #ifdef CONFIG_SYS_FLASH_CFI
 313
 314 #       define CONFIG_FLASH_CFI_DRIVER  1
 315 #       define CONFIG_SYS_FLASH_USE_BUFFER_WRITE        1
 316 #       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 317 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_8BIT
 318 #       define CONFIG_SYS_MAX_FLASH_BANKS       2       /* max number of memory banks */
 319 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 320 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 321 #       define CONFIG_SYS_FLASH_CHECKSUM
 322 #       define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
 323 #       define CONFIG_FLASH_CFI_LEGACY
 324
 325 #ifdef CONFIG_FLASH_CFI_LEGACY
 326 #       define CONFIG_SYS_ATMEL_REGION          4
 327 #       define CONFIG_SYS_ATMEL_TOTALSECT       11
 328 #       define CONFIG_SYS_ATMEL_SECT            {1, 2, 1, 7}
 329 #       define CONFIG_SYS_ATMEL_SECTSZ          {0x4000, 0x2000, 0x8000, 0x10000}
 330 #endif
 331 #endif
 332
 333 /*
 334  * This is setting for JFFS2 support in u-boot.
 335  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 336  */
 337 #ifdef CONFIG_CMD_JFFS2
 338 #ifdef CF_STMICRO_BOOT
 339 #       define CONFIG_JFFS2_DEV         "nor1"
 340 #       define CONFIG_JFFS2_PART_SIZE   0x01000000
 341 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000)
 342 #endif
 343 #ifdef CONFIG_SYS_ATMEL_BOOT
 344 #       define CONFIG_JFFS2_DEV         "nor1"
 345 #       define CONFIG_JFFS2_PART_SIZE   0x01000000
 346 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000)
 347 #endif
 348 #ifdef CONFIG_SYS_INTEL_BOOT
 349 #       define CONFIG_JFFS2_DEV         "nor0"
 350 #       define CONFIG_JFFS2_PART_SIZE   (0x01000000 - 0x500000)
 351 #       define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
 352 #endif
 353 #endif
 354
 355 /*-----------------------------------------------------------------------
 356  * Cache Configuration
 357  */
 358 #define CONFIG_SYS_CACHELINE_SIZE               16
 359
 360 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 361                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 362 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 363                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 364 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_BCINVA + CF_CACR_ICINVA)
 365 #define CONFIG_SYS_DCACHE_INV           (CF_CACR_DCINVA)
 366 #define CONFIG_SYS_CACHE_ACR2           (CONFIG_SYS_SDRAM_BASE | \
 367                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 368                                          CF_ACR_EN | CF_ACR_SM_ALL)
 369 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_BEC | CF_CACR_IEC | \
 370                                          CF_CACR_ICINVA | CF_CACR_EUSP)
 371 #define CONFIG_SYS_CACHE_DCACR          ((CONFIG_SYS_CACHE_ICACR | \
 372                                          CF_CACR_DEC | CF_CACR_DDCM_P | \
 373                                          CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
 374
 375 /*-----------------------------------------------------------------------
 376  * Memory bank definitions
 377  */
 378 /*
 379  * CS0 - NOR Flash 1, 2, 4, or 8MB
 380  * CS1 - CompactFlash and registers
 381  * CS2 - CPLD
 382  * CS3 - FPGA
 383  * CS4 - Available
 384  * CS5 - Available
 385  */
 386
 387 #if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT)
 388  /* Atmel Flash */
 389 #define CONFIG_SYS_CS0_BASE             0x04000000
 390 #define CONFIG_SYS_CS0_MASK             0x00070001
 391 #define CONFIG_SYS_CS0_CTRL             0x00001140
 392 /* Intel Flash */
 393 #define CONFIG_SYS_CS1_BASE             0x00000000
 394 #define CONFIG_SYS_CS1_MASK             0x01FF0001
 395 #define CONFIG_SYS_CS1_CTRL             0x00000D60
 396
 397 #define CONFIG_SYS_ATMEL_BASE           CONFIG_SYS_CS0_BASE
 398 #else
 399 /* Intel Flash */
 400 #define CONFIG_SYS_CS0_BASE             0x00000000
 401 #define CONFIG_SYS_CS0_MASK             0x01FF0001
 402 #define CONFIG_SYS_CS0_CTRL             0x00000D60
 403  /* Atmel Flash */
 404 #define CONFIG_SYS_CS1_BASE             0x04000000
 405 #define CONFIG_SYS_CS1_MASK             0x00070001
 406 #define CONFIG_SYS_CS1_CTRL             0x00001140
 407
 408 #define CONFIG_SYS_ATMEL_BASE           CONFIG_SYS_CS1_BASE
 409 #endif
 410
 411 /* CPLD */
 412 #define CONFIG_SYS_CS2_BASE             0x08000000
 413 #define CONFIG_SYS_CS2_MASK             0x00070001
 414 #define CONFIG_SYS_CS2_CTRL             0x003f1140
 415
 416 /* FPGA */
 417 #define CONFIG_SYS_CS3_BASE             0x09000000
 418 #define CONFIG_SYS_CS3_MASK             0x00070001
 419 #define CONFIG_SYS_CS3_CTRL             0x00000020
 420
 421 #endif                          /* _M54455EVB_H */