include/configs/MPC832XEMDS.h

   1 /*
   2  * Copyright (C) 2006 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License as
   6  * published by the Free Software Foundation; either version 2 of
   7  * the License, or (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  17  * MA 02111-1307 USA
  18  */
  19
  20 #ifndef __CONFIG_H
  21 #define __CONFIG_H
  22
  23 /*
  24  * High Level Configuration Options
  25  */
  26 #define CONFIG_E300             1       /* E300 family */
  27 #define CONFIG_QE               1       /* Has QE */
  28 #define CONFIG_MPC83xx          1       /* MPC83xx family */
  29 #define CONFIG_MPC832x          1       /* MPC832x CPU specific */
  30 #define CONFIG_MPC832XEMDS      1       /* MPC832XEMDS board specific */
  31
  32 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  33
  34 /*
  35  * System Clock Setup
  36  */
  37 #ifdef CONFIG_PCISLAVE
  38 #define CONFIG_83XX_PCICLK      66000000        /* in HZ */
  39 #else
  40 #define CONFIG_83XX_CLKIN       66000000        /* in Hz */
  41 #endif
  42
  43 #ifndef CONFIG_SYS_CLK_FREQ
  44 #define CONFIG_SYS_CLK_FREQ     66000000
  45 #endif
  46
  47 /*
  48  * Hardware Reset Configuration Word
  49  */
  50 #define CONFIG_SYS_HRCW_LOW (\
  51         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
  52         HRCWL_DDR_TO_SCB_CLK_2X1 |\
  53         HRCWL_VCO_1X2 |\
  54         HRCWL_CSB_TO_CLKIN_2X1 |\
  55         HRCWL_CORE_TO_CSB_2X1 |\
  56         HRCWL_CE_PLL_VCO_DIV_2 |\
  57         HRCWL_CE_PLL_DIV_1X1 |\
  58         HRCWL_CE_TO_PLL_1X3)
  59
  60 #ifdef CONFIG_PCISLAVE
  61 #define CONFIG_SYS_HRCW_HIGH (\
  62         HRCWH_PCI_AGENT |\
  63         HRCWH_PCI1_ARBITER_DISABLE |\
  64         HRCWH_CORE_ENABLE |\
  65         HRCWH_FROM_0XFFF00100 |\
  66         HRCWH_BOOTSEQ_DISABLE |\
  67         HRCWH_SW_WATCHDOG_DISABLE |\
  68         HRCWH_ROM_LOC_LOCAL_16BIT |\
  69         HRCWH_BIG_ENDIAN |\
  70         HRCWH_LALE_NORMAL)
  71 #else
  72 #define CONFIG_SYS_HRCW_HIGH (\
  73         HRCWH_PCI_HOST |\
  74         HRCWH_PCI1_ARBITER_ENABLE |\
  75         HRCWH_CORE_ENABLE |\
  76         HRCWH_FROM_0X00000100 |\
  77         HRCWH_BOOTSEQ_DISABLE |\
  78         HRCWH_SW_WATCHDOG_DISABLE |\
  79         HRCWH_ROM_LOC_LOCAL_16BIT |\
  80         HRCWH_BIG_ENDIAN |\
  81         HRCWH_LALE_NORMAL)
  82 #endif
  83
  84 /*
  85  * System IO Config
  86  */
  87 #define CONFIG_SYS_SICRL                0x00000000
  88
  89 #define CONFIG_BOARD_EARLY_INIT_F       /* call board_pre_init */
  90 #define CONFIG_BOARD_EARLY_INIT_R
  91
  92 /*
  93  * IMMR new address
  94  */
  95 #define CONFIG_SYS_IMMR         0xE0000000
  96
  97 /*
  98  * DDR Setup
  99  */
 100 #define CONFIG_SYS_DDR_BASE             0x00000000      /* DDR is system memory */
 101 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 102 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 103 #define CONFIG_SYS_DDRCDR               0x73000002      /* DDR II voltage is 1.8V */
 104
 105 #undef CONFIG_SPD_EEPROM
 106 #if defined(CONFIG_SPD_EEPROM)
 107 /* Determine DDR configuration from I2C interface
 108  */
 109 #define SPD_EEPROM_ADDRESS      0x51    /* DDR SODIMM */
 110 #else
 111 /* Manually set up DDR parameters
 112  */
 113 #define CONFIG_SYS_DDR_SIZE             128     /* MB */
 114 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80840102
 115 #define CONFIG_SYS_DDR_TIMING_0 0x00220802
 116 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322
 117 #define CONFIG_SYS_DDR_TIMING_2 0x0f9048ca
 118 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 119 #define CONFIG_SYS_DDR_CLK_CNTL 0x02000000
 120 #define CONFIG_SYS_DDR_MODE             0x44400232
 121 #define CONFIG_SYS_DDR_MODE2            0x8000c000
 122 #define CONFIG_SYS_DDR_INTERVAL 0x03200064
 123 #define CONFIG_SYS_DDR_CS0_BNDS 0x00000007
 124 #define CONFIG_SYS_DDR_SDRAM_CFG        0x43080000
 125 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
 126 #endif
 127
 128 /*
 129  * Memory test
 130  */
 131 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
 132 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
 133 #define CONFIG_SYS_MEMTEST_END          0x00100000
 134
 135 /*
 136  * The reserved memory
 137  */
 138 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 139
 140 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 141 #define CONFIG_SYS_RAMBOOT
 142 #else
 143 #undef  CONFIG_SYS_RAMBOOT
 144 #endif
 145
 146 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 147 #define CONFIG_SYS_MONITOR_LEN          (384 * 1024)    /* Reserve 384 kB for Mon */
 148 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024)    /* Reserved for malloc */
 149
 150 /*
 151  * Initial RAM Base Address Setup
 152  */
 153 #define CONFIG_SYS_INIT_RAM_LOCK        1
 154 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000      /* Initial RAM address */
 155 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000          /* Size of used area in RAM */
 156 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 157
 158 /*
 159  * Local Bus Configuration & Clock Setup
 160  */
 161 #define CONFIG_SYS_LCRR_DBYP            LCRR_DBYP
 162 #define CONFIG_SYS_LCRR_CLKDIV          LCRR_CLKDIV_2
 163 #define CONFIG_SYS_LBC_LBCR             0x00000000
 164
 165 /*
 166  * FLASH on the Local Bus
 167  */
 168 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 169 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
 170 #define CONFIG_SYS_FLASH_BASE           0xFE000000      /* FLASH base address */
 171 #define CONFIG_SYS_FLASH_SIZE           16      /* FLASH size is 16M */
 172 #define CONFIG_SYS_FLASH_PROTECTION     1               /* Use h/w Flash protection. */
 173
 174 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE   /* Window base at flash base */
 175 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x80000018      /* 32MB window size */
 176
 177 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE |        /* Flash Base address */ \
 178                         (2 << BR_PS_SHIFT) |    /* 16 bit port size */ \
 179                         BR_V)                   /* valid */
 180 #define CONFIG_SYS_OR0_PRELIM           0xfe006ff7      /* 16MB Flash size */
 181
 182 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 183 #define CONFIG_SYS_MAX_FLASH_SECT       128             /* sectors per device */
 184
 185 #undef CONFIG_SYS_FLASH_CHECKSUM
 186
 187 /*
 188  * BCSR on the Local Bus
 189  */
 190 #define CONFIG_SYS_BCSR         0xF8000000
 191 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_BCSR /* Access window base at BCSR base */
 192 #define CONFIG_SYS_LBLAWAR1_PRELIM      0x8000000E      /* Access window size 32K */
 193
 194 #define CONFIG_SYS_BR1_PRELIM           (CONFIG_SYS_BCSR|0x00000801)    /* Port size=8bit, MSEL=GPCM */
 195 #define CONFIG_SYS_OR1_PRELIM           0xFFFFE9f7      /* length 32K */
 196
 197 /*
 198  * SDRAM on the Local Bus
 199  */
 200 #undef CONFIG_SYS_LB_SDRAM              /* The board has not SRDAM on local bus */
 201
 202 #ifdef CONFIG_SYS_LB_SDRAM
 203 #define CONFIG_SYS_LBC_SDRAM_BASE       0xF0000000      /* SDRAM base address */
 204 #define CONFIG_SYS_LBC_SDRAM_SIZE       64              /* LBC SDRAM is 64MB */
 205
 206 #define CONFIG_SYS_LBLAWBAR2_PRELIM     CONFIG_SYS_LBC_SDRAM_BASE
 207 #define CONFIG_SYS_LBLAWAR2_PRELIM      0x80000019      /* 64MB */
 208
 209 /*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
 210 /*
 211  * Base Register 2 and Option Register 2 configure SDRAM.
 212  * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
 213  *
 214  * For BR2, need:
 215  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 216  *    port size = 32-bits = BR2[19:20] = 11
 217  *    no parity checking = BR2[21:22] = 00
 218  *    SDRAM for MSEL = BR2[24:26] = 011
 219  *    Valid = BR[31] = 1
 220  *
 221  * 0    4    8    12   16   20   24   28
 222  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
 223  *
 224  * CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
 225  * the top 17 bits of BR2.
 226  */
 227
 228 #define CONFIG_SYS_BR2_PRELIM   0xf0001861      /*Port size=32bit, MSEL=SDRAM */
 229
 230 /*
 231  * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 232  *
 233  * For OR2, need:
 234  *    64MB mask for AM, OR2[0:7] = 1111 1100
 235  *                 XAM, OR2[17:18] = 11
 236  *    9 columns OR2[19-21] = 010
 237  *    13 rows   OR2[23-25] = 100
 238  *    EAD set for extra time OR[31] = 1
 239  *
 240  * 0    4    8    12   16   20   24   28
 241  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
 242  */
 243
 244 #define CONFIG_SYS_OR2_PRELIM   0xfc006901
 245
 246 #define CONFIG_SYS_LBC_LSRT     0x32000000      /* LB sdram refresh timer, about 6us */
 247 #define CONFIG_SYS_LBC_MRTPR    0x20000000      /* LB refresh timer prescal, 266MHz/32 */
 248
 249 #define CONFIG_SYS_LBC_LSDMR_COMMON     0x0063b723
 250
 251 #endif
 252
 253 /*
 254  * Windows to access PIB via local bus
 255  */
 256 #define CONFIG_SYS_LBLAWBAR3_PRELIM     0xf8008000      /* windows base 0xf8008000 */
 257 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x8000000f      /* windows size 64KB */
 258
 259 /*
 260  * CS2 on Local Bus, to PIB
 261  */
 262 #define CONFIG_SYS_BR2_PRELIM   0xf8008801      /* CS2 base address at 0xf8008000 */
 263 #define CONFIG_SYS_OR2_PRELIM   0xffffe9f7      /* size 32KB, port size 8bit, GPCM */
 264
 265 /*
 266  * CS3 on Local Bus, to PIB
 267  */
 268 #define CONFIG_SYS_BR3_PRELIM   0xf8010801      /* CS3 base address at 0xf8010000 */
 269 #define CONFIG_SYS_OR3_PRELIM   0xffffe9f7      /* size 32KB, port size 8bit, GPCM */
 270
 271 /*
 272  * Serial Port
 273  */
 274 #define CONFIG_CONS_INDEX       1
 275 #define CONFIG_SYS_NS16550
 276 #define CONFIG_SYS_NS16550_SERIAL
 277 #define CONFIG_SYS_NS16550_REG_SIZE     1
 278 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 279
 280 #define CONFIG_SYS_BAUDRATE_TABLE  \
 281         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 282
 283 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 284 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 285
 286 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 287 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
 288 /* Use the HUSH parser */
 289 #define CONFIG_SYS_HUSH_PARSER
 290 #ifdef CONFIG_SYS_HUSH_PARSER
 291 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 292 #endif
 293
 294 /* pass open firmware flat tree */
 295 #define CONFIG_OF_LIBFDT        1
 296 #define CONFIG_OF_BOARD_SETUP   1
 297 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 298
 299 /* I2C */
 300 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 301 #undef CONFIG_SOFT_I2C          /* I2C bit-banged */
 302 #define CONFIG_FSL_I2C
 303 #define CONFIG_SYS_I2C_SPEED    400000  /* I2C speed and slave address */
 304 #define CONFIG_SYS_I2C_SLAVE    0x7F
 305 #define CONFIG_SYS_I2C_NOPROBES {0x51}  /* Don't probe these addrs */
 306 #define CONFIG_SYS_I2C_OFFSET   0x3000
 307
 308 /*
 309  * Config on-board RTC
 310  */
 311 #define CONFIG_RTC_DS1374               /* use ds1374 rtc via i2c */
 312 #define CONFIG_SYS_I2C_RTC_ADDR 0x68    /* at address 0x68 */
 313
 314 /*
 315  * General PCI
 316  * Addresses are mapped 1-1.
 317  */
 318 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 319 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 320 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 321 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 322 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 323 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 324 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 325 #define CONFIG_SYS_PCI1_IO_PHYS         0xE0300000
 326 #define CONFIG_SYS_PCI1_IO_SIZE         0x100000        /* 1M */
 327
 328 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL    CONFIG_SYS_SDRAM_BASE
 329 #define CONFIG_SYS_PCI_SLV_MEM_BUS      0x00000000
 330 #define CONFIG_SYS_PCI_SLV_MEM_SIZE     0x80000000
 331
 332
 333 #ifdef CONFIG_PCI
 334
 335 #define CONFIG_NET_MULTI
 336 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 337 #define CONFIG_83XX_PCI_STREAMING
 338
 339 #undef CONFIG_EEPRO100
 340 #undef CONFIG_PCI_SCAN_SHOW     /* show pci devices on startup */
 341 #define CONFIG_SYS_PCI_SUBSYS_VENDORID  0x1957  /* Freescale */
 342
 343 #endif  /* CONFIG_PCI */
 344
 345
 346 #ifndef CONFIG_NET_MULTI
 347 #define CONFIG_NET_MULTI        1
 348 #endif
 349
 350 /*
 351  * QE UEC ethernet configuration
 352  */
 353 #define CONFIG_UEC_ETH
 354 #define CONFIG_ETHPRIME         "UEC0"
 355
 356 #define CONFIG_UEC_ETH1         /* ETH3 */
 357
 358 #ifdef CONFIG_UEC_ETH1
 359 #define CONFIG_SYS_UEC1_UCC_NUM 2       /* UCC3 */
 360 #define CONFIG_SYS_UEC1_RX_CLK          QE_CLK9
 361 #define CONFIG_SYS_UEC1_TX_CLK          QE_CLK10
 362 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 363 #define CONFIG_SYS_UEC1_PHY_ADDR        3
 364 #define CONFIG_SYS_UEC1_INTERFACE_TYPE  PHY_INTERFACE_MODE_MII
 365 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 366 #endif
 367
 368 #define CONFIG_UEC_ETH2         /* ETH4 */
 369
 370 #ifdef CONFIG_UEC_ETH2
 371 #define CONFIG_SYS_UEC2_UCC_NUM 3       /* UCC4 */
 372 #define CONFIG_SYS_UEC2_RX_CLK          QE_CLK7
 373 #define CONFIG_SYS_UEC2_TX_CLK          QE_CLK8
 374 #define CONFIG_SYS_UEC2_ETH_TYPE        FAST_ETH
 375 #define CONFIG_SYS_UEC2_PHY_ADDR        4
 376 #define CONFIG_SYS_UEC2_INTERFACE_TYPE  PHY_INTERFACE_MODE_MII
 377 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
 378 #endif
 379
 380 /*
 381  * Environment
 382  */
 383 #ifndef CONFIG_SYS_RAMBOOT
 384         #define CONFIG_ENV_IS_IN_FLASH  1
 385         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 386         #define CONFIG_ENV_SECT_SIZE    0x20000
 387         #define CONFIG_ENV_SIZE         0x2000
 388 #else
 389         #define CONFIG_SYS_NO_FLASH             1       /* Flash is not usable now */
 390         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 391         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 392         #define CONFIG_ENV_SIZE         0x2000
 393 #endif
 394
 395 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 396 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 397
 398 /*
 399  * BOOTP options
 400  */
 401 #define CONFIG_BOOTP_BOOTFILESIZE
 402 #define CONFIG_BOOTP_BOOTPATH
 403 #define CONFIG_BOOTP_GATEWAY
 404 #define CONFIG_BOOTP_HOSTNAME
 405
 406
 407 /*
 408  * Command line configuration.
 409  */
 410 #include <config_cmd_default.h>
 411
 412 #define CONFIG_CMD_PING
 413 #define CONFIG_CMD_I2C
 414 #define CONFIG_CMD_ASKENV
 415
 416 #if defined(CONFIG_PCI)
 417     #define CONFIG_CMD_PCI
 418 #endif
 419
 420 #if defined(CONFIG_SYS_RAMBOOT)
 421     #undef CONFIG_CMD_SAVEENV
 422     #undef CONFIG_CMD_LOADS
 423 #endif
 424
 425
 426 #undef CONFIG_WATCHDOG          /* watchdog disabled */
 427
 428 /*
 429  * Miscellaneous configurable options
 430  */
 431 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 432 #define CONFIG_SYS_LOAD_ADDR            0x2000000       /* default load address */
 433 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt */
 434
 435 #if defined(CONFIG_CMD_KGDB)
 436         #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 437 #else
 438         #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 439 #endif
 440
 441 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)      /* Print Buffer Size */
 442 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 443 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 444 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 445
 446 /*
 447  * For booting Linux, the board info and command line data
 448  * have to be in the first 256 MB of memory, since this is
 449  * the maximum mapped by the Linux kernel during initialization.
 450  */
 451 #define CONFIG_SYS_BOOTMAPSZ            (256 << 20)     /* Initial Memory map for Linux */
 452
 453 /*
 454  * Core HID Setup
 455  */
 456 #define CONFIG_SYS_HID0_INIT    0x000000000
 457 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 458                                  HID0_ENABLE_INSTRUCTION_CACHE)
 459 #define CONFIG_SYS_HID2         HID2_HBE
 460
 461 /*
 462  * MMU Setup
 463  */
 464
 465 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 466
 467 /* DDR: cache cacheable */
 468 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 469 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 470 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 471 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 472
 473 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
 474 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_IMMR | BATL_PP_10 | \
 475                         BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 476 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
 477 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 478 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 479
 480 /* BCSR: cache-inhibit and guarded */
 481 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_BCSR | BATL_PP_10 | \
 482                         BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 483 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
 484 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 485 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 486
 487 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
 488 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 489 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
 490 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 491                         BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 492 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 493
 494 #define CONFIG_SYS_IBAT4L       (0)
 495 #define CONFIG_SYS_IBAT4U       (0)
 496 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 497 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 498
 499 /* Stack in dcache: cacheable, no memory coherence */
 500 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
 501 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 502 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 503 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 504
 505 #ifdef CONFIG_PCI
 506 /* PCI MEM space: cacheable */
 507 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
 508 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
 509 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 510 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 511 /* PCI MMIO space: cache-inhibit and guarded */
 512 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_PCI1_MMIO_PHYS | BATL_PP_10 | \
 513                         BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 514 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
 515 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 516 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 517 #else
 518 #define CONFIG_SYS_IBAT6L       (0)
 519 #define CONFIG_SYS_IBAT6U       (0)
 520 #define CONFIG_SYS_IBAT7L       (0)
 521 #define CONFIG_SYS_IBAT7U       (0)
 522 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 523 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 524 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 525 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 526 #endif
 527
 528 #if defined(CONFIG_CMD_KGDB)
 529 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 530 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 531 #endif
 532
 533 /*
 534  * Environment Configuration
 535  */ #define CONFIG_ENV_OVERWRITE
 536
 537 #if defined(CONFIG_UEC_ETH)
 538 #define CONFIG_HAS_ETH0
 539 #define CONFIG_HAS_ETH1
 540 #endif
 541
 542 #define CONFIG_BAUDRATE 115200
 543
 544 #define CONFIG_LOADADDR 800000  /* default location for tftp and bootm */
 545
 546 #define CONFIG_BOOTDELAY 6      /* -1 disables auto-boot */
 547 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 548
 549 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 550    "netdev=eth0\0"                                                      \
 551    "consoledev=ttyS0\0"                                                 \
 552    "ramdiskaddr=1000000\0"                                              \
 553    "ramdiskfile=ramfs.83xx\0"                                           \
 554    "fdtaddr=780000\0"                                                   \
 555    "fdtfile=mpc832x_mds.dtb\0"                                          \
 556    ""
 557
 558 #define CONFIG_NFSBOOTCOMMAND                                           \
 559    "setenv bootargs root=/dev/nfs rw "                                  \
 560       "nfsroot=$serverip:$rootpath "                                    \
 561       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 562       "console=$consoledev,$baudrate $othbootargs;"                     \
 563    "tftp $loadaddr $bootfile;"                                          \
 564    "tftp $fdtaddr $fdtfile;"                                            \
 565    "bootm $loadaddr - $fdtaddr"
 566
 567 #define CONFIG_RAMBOOTCOMMAND                                           \
 568    "setenv bootargs root=/dev/ram rw "                                  \
 569       "console=$consoledev,$baudrate $othbootargs;"                     \
 570    "tftp $ramdiskaddr $ramdiskfile;"                                    \
 571    "tftp $loadaddr $bootfile;"                                          \
 572    "tftp $fdtaddr $fdtfile;"                                            \
 573    "bootm $loadaddr $ramdiskaddr $fdtaddr"
 574
 575
 576 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 577
 578 #endif  /* __CONFIG_H */