include/configs/MPC8349EMDS.h

   1 /*
   2  * (C) Copyright 2006-2010
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * mpc8349emds board configuration file
  10  *
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #define CONFIG_SYS_GENERIC_BOARD
  17 #define CONFIG_DISPLAY_BOARDINFO
  18
  19 /*
  20  * High Level Configuration Options
  21  */
  22 #define CONFIG_E300             1       /* E300 Family */
  23 #define CONFIG_MPC834x          1       /* MPC834x family */
  24 #define CONFIG_MPC8349          1       /* MPC8349 specific */
  25 #define CONFIG_MPC8349EMDS      1       /* MPC8349EMDS board specific */
  26
  27 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  28
  29 #define CONFIG_PCI_66M
  30 #ifdef CONFIG_PCI_66M
  31 #define CONFIG_83XX_CLKIN       66000000        /* in Hz */
  32 #else
  33 #define CONFIG_83XX_CLKIN       33000000        /* in Hz */
  34 #endif
  35
  36 #ifdef CONFIG_PCISLAVE
  37 #define CONFIG_PCI
  38 #define CONFIG_83XX_PCICLK      66666666        /* in Hz */
  39 #endif /* CONFIG_PCISLAVE */
  40
  41 #ifndef CONFIG_SYS_CLK_FREQ
  42 #ifdef CONFIG_PCI_66M
  43 #define CONFIG_SYS_CLK_FREQ     66000000
  44 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_4X1
  45 #else
  46 #define CONFIG_SYS_CLK_FREQ     33000000
  47 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_8X1
  48 #endif
  49 #endif
  50
  51 #define CONFIG_BOARD_EARLY_INIT_F               /* call board_pre_init */
  52
  53 #define CONFIG_SYS_IMMR         0xE0000000
  54
  55 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
  56 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
  57 #define CONFIG_SYS_MEMTEST_END          0x00100000
  58
  59 /*
  60  * DDR Setup
  61  */
  62 #define CONFIG_DDR_ECC                  /* support DDR ECC function */
  63 #define CONFIG_DDR_ECC_CMD              /* use DDR ECC user commands */
  64 #define CONFIG_SPD_EEPROM               /* use SPD EEPROM for DDR setup*/
  65
  66 /*
  67  * define CONFIG_SYS_FSL_DDR2 to use unified DDR driver
  68  * undefine it to use old spd_sdram.c
  69  */
  70 #define CONFIG_SYS_FSL_DDR2
  71 #ifdef CONFIG_SYS_FSL_DDR2
  72 #define CONFIG_SYS_FSL_DDRC_GEN2
  73 #define CONFIG_SYS_SPD_BUS_NUM  0
  74 #define SPD_EEPROM_ADDRESS1     0x52
  75 #define SPD_EEPROM_ADDRESS2     0x51
  76 #define CONFIG_NUM_DDR_CONTROLLERS      1
  77 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
  78 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
  79 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  80 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
  81 #endif
  82
  83 /*
  84  * 32-bit data path mode.
  85  *
  86  * Please note that using this mode for devices with the real density of 64-bit
  87  * effectively reduces the amount of available memory due to the effect of
  88  * wrapping around while translating address to row/columns, for example in the
  89  * 256MB module the upper 128MB get aliased with contents of the lower
  90  * 128MB); normally this define should be used for devices with real 32-bit
  91  * data path.
  92  */
  93 #undef CONFIG_DDR_32BIT
  94
  95 #define CONFIG_SYS_DDR_BASE     0x00000000      /* DDR is system memory*/
  96 #define CONFIG_SYS_SDRAM_BASE   CONFIG_SYS_DDR_BASE
  97 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  98 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN \
  99                                         | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
 100 #undef  CONFIG_DDR_2T_TIMING
 101
 102 /*
 103  * DDRCDR - DDR Control Driver Register
 104  */
 105 #define CONFIG_SYS_DDRCDR_VALUE 0x80080001
 106
 107 #if defined(CONFIG_SPD_EEPROM)
 108 /*
 109  * Determine DDR configuration from I2C interface.
 110  */
 111 #define SPD_EEPROM_ADDRESS      0x51            /* DDR DIMM */
 112 #else
 113 /*
 114  * Manually set up DDR parameters
 115  */
 116 #define CONFIG_SYS_DDR_SIZE             256             /* MB */
 117 #if defined(CONFIG_DDR_II)
 118 #define CONFIG_SYS_DDRCDR               0x80080001
 119 #define CONFIG_SYS_DDR_CS2_BNDS         0x0000000f
 120 #define CONFIG_SYS_DDR_CS2_CONFIG       0x80330102
 121 #define CONFIG_SYS_DDR_TIMING_0         0x00220802
 122 #define CONFIG_SYS_DDR_TIMING_1         0x38357322
 123 #define CONFIG_SYS_DDR_TIMING_2         0x2f9048c8
 124 #define CONFIG_SYS_DDR_TIMING_3         0x00000000
 125 #define CONFIG_SYS_DDR_CLK_CNTL         0x02000000
 126 #define CONFIG_SYS_DDR_MODE             0x47d00432
 127 #define CONFIG_SYS_DDR_MODE2            0x8000c000
 128 #define CONFIG_SYS_DDR_INTERVAL         0x03cf0080
 129 #define CONFIG_SYS_DDR_SDRAM_CFG        0x43000000
 130 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
 131 #else
 132 #define CONFIG_SYS_DDR_CS2_CONFIG       (CSCONFIG_EN \
 133                                 | CSCONFIG_ROW_BIT_13 \
 134                                 | CSCONFIG_COL_BIT_10)
 135 #define CONFIG_SYS_DDR_TIMING_1 0x36332321
 136 #define CONFIG_SYS_DDR_TIMING_2 0x00000800      /* P9-45,may need tuning */
 137 #define CONFIG_SYS_DDR_CONTROL  0xc2000000      /* unbuffered,no DYN_PWR */
 138 #define CONFIG_SYS_DDR_INTERVAL 0x04060100      /* autocharge,no open page */
 139
 140 #if defined(CONFIG_DDR_32BIT)
 141 /* set burst length to 8 for 32-bit data path */
 142                                 /* DLL,normal,seq,4/2.5, 8 burst len */
 143 #define CONFIG_SYS_DDR_MODE     0x00000023
 144 #else
 145 /* the default burst length is 4 - for 64-bit data path */
 146                                 /* DLL,normal,seq,4/2.5, 4 burst len */
 147 #define CONFIG_SYS_DDR_MODE     0x00000022
 148 #endif
 149 #endif
 150 #endif
 151
 152 /*
 153  * SDRAM on the Local Bus
 154  */
 155 #define CONFIG_SYS_LBC_SDRAM_BASE       0xF0000000      /* Localbus SDRAM */
 156 #define CONFIG_SYS_LBC_SDRAM_SIZE       64              /* LBC SDRAM is 64MB */
 157
 158 /*
 159  * FLASH on the Local Bus
 160  */
 161 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 162 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 163 #define CONFIG_SYS_FLASH_BASE           0xFE000000      /* start of FLASH   */
 164 #define CONFIG_SYS_FLASH_SIZE           32      /* max flash size in MB */
 165 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
 166 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 167
 168 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE \
 169                                 | BR_PS_16      /* 16 bit port  */ \
 170                                 | BR_MS_GPCM    /* MSEL = GPCM */ \
 171                                 | BR_V)         /* valid */
 172 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 173                                 | OR_UPM_XAM \
 174                                 | OR_GPCM_CSNT \
 175                                 | OR_GPCM_ACS_DIV2 \
 176                                 | OR_GPCM_XACS \
 177                                 | OR_GPCM_SCY_15 \
 178                                 | OR_GPCM_TRLX_SET \
 179                                 | OR_GPCM_EHTR_SET \
 180                                 | OR_GPCM_EAD)
 181
 182                                         /* window base at flash base */
 183 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 184 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_32MB)
 185
 186 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 187 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max sectors per device */
 188
 189 #undef CONFIG_SYS_FLASH_CHECKSUM
 190 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 191 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 192
 193 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 194
 195 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 196 #define CONFIG_SYS_RAMBOOT
 197 #else
 198 #undef  CONFIG_SYS_RAMBOOT
 199 #endif
 200
 201 /*
 202  * BCSR register on local bus 32KB, 8-bit wide for MDS config reg
 203  */
 204 #define CONFIG_SYS_BCSR                 0xE2400000
 205                                         /* Access window base at BCSR base */
 206 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_BCSR
 207 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 208 #define CONFIG_SYS_BR1_PRELIM           (CONFIG_SYS_BCSR \
 209                                         | BR_PS_8 \
 210                                         | BR_MS_GPCM \
 211                                         | BR_V)
 212                                         /* 0x00000801 */
 213 #define CONFIG_SYS_OR1_PRELIM           (OR_AM_32KB \
 214                                         | OR_GPCM_XAM \
 215                                         | OR_GPCM_CSNT \
 216                                         | OR_GPCM_SCY_15 \
 217                                         | OR_GPCM_TRLX_CLEAR \
 218                                         | OR_GPCM_EHTR_CLEAR)
 219                                         /* 0xFFFFE8F0 */
 220
 221 #define CONFIG_SYS_INIT_RAM_LOCK        1
 222 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000      /* Initial RAM addr */
 223 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000  /* Size of used area in RAM*/
 224
 225 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 226                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 227 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 228
 229 #define CONFIG_SYS_MONITOR_LEN  (384 * 1024)    /* Reserve 384 kB for Mon */
 230 #define CONFIG_SYS_MALLOC_LEN   (256 * 1024)    /* Reserved for malloc */
 231
 232 /*
 233  * Local Bus LCRR and LBCR regs
 234  *    LCRR:  DLL bypass, Clock divider is 4
 235  * External Local Bus rate is
 236  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
 237  */
 238 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 239 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 240 #define CONFIG_SYS_LBC_LBCR     0x00000000
 241
 242 /*
 243  * The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory.
 244  * if board has SRDAM on local bus, you can define CONFIG_SYS_LB_SDRAM
 245  */
 246 #undef CONFIG_SYS_LB_SDRAM
 247
 248 #ifdef CONFIG_SYS_LB_SDRAM
 249 /* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */
 250 /*
 251  * Base Register 2 and Option Register 2 configure SDRAM.
 252  * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
 253  *
 254  * For BR2, need:
 255  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 256  *    port-size = 32-bits = BR2[19:20] = 11
 257  *    no parity checking = BR2[21:22] = 00
 258  *    SDRAM for MSEL = BR2[24:26] = 011
 259  *    Valid = BR[31] = 1
 260  *
 261  * 0    4    8    12   16   20   24   28
 262  * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
 263  */
 264
 265 #define CONFIG_SYS_BR2_PRELIM           (CONFIG_SYS_LBC_SDRAM_BASE \
 266                                         | BR_PS_32      /* 32-bit port */ \
 267                                         | BR_MS_SDRAM   /* MSEL = SDRAM */ \
 268                                         | BR_V)         /* Valid */
 269                                         /* 0xF0001861 */
 270 #define CONFIG_SYS_LBLAWBAR2_PRELIM     CONFIG_SYS_LBC_SDRAM_BASE
 271 #define CONFIG_SYS_LBLAWAR2_PRELIM      (LBLAWAR_EN | LBLAWAR_64MB)
 272
 273 /*
 274  * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 275  *
 276  * For OR2, need:
 277  *    64MB mask for AM, OR2[0:7] = 1111 1100
 278  *                 XAM, OR2[17:18] = 11
 279  *    9 columns OR2[19-21] = 010
 280  *    13 rows   OR2[23-25] = 100
 281  *    EAD set for extra time OR[31] = 1
 282  *
 283  * 0    4    8    12   16   20   24   28
 284  * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
 285  */
 286
 287 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_64MB \
 288                         | OR_SDRAM_XAM \
 289                         | ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \
 290                         | ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \
 291                         | OR_SDRAM_EAD)
 292                         /* 0xFC006901 */
 293
 294                                 /* LB sdram refresh timer, about 6us */
 295 #define CONFIG_SYS_LBC_LSRT     0x32000000
 296                                 /* LB refresh timer prescal, 266MHz/32 */
 297 #define CONFIG_SYS_LBC_MRTPR    0x20000000
 298
 299 #define CONFIG_SYS_LBC_LSDMR_COMMON    (LSDMR_RFEN      \
 300                                 | LSDMR_BSMA1516        \
 301                                 | LSDMR_RFCR8           \
 302                                 | LSDMR_PRETOACT6       \
 303                                 | LSDMR_ACTTORW3        \
 304                                 | LSDMR_BL8             \
 305                                 | LSDMR_WRC3            \
 306                                 | LSDMR_CL3)
 307
 308 /*
 309  * SDRAM Controller configuration sequence.
 310  */
 311 #define CONFIG_SYS_LBC_LSDMR_1  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
 312 #define CONFIG_SYS_LBC_LSDMR_2  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
 313 #define CONFIG_SYS_LBC_LSDMR_3  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
 314 #define CONFIG_SYS_LBC_LSDMR_4  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
 315 #define CONFIG_SYS_LBC_LSDMR_5  (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
 316 #endif
 317
 318 /*
 319  * Serial Port
 320  */
 321 #define CONFIG_CONS_INDEX     1
 322 #define CONFIG_SYS_NS16550
 323 #define CONFIG_SYS_NS16550_SERIAL
 324 #define CONFIG_SYS_NS16550_REG_SIZE    1
 325 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 326
 327 #define CONFIG_SYS_BAUDRATE_TABLE  \
 328                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 329
 330 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 331 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 332
 333 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 334 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
 335 /* Use the HUSH parser */
 336 #define CONFIG_SYS_HUSH_PARSER
 337
 338 /* pass open firmware flat tree */
 339 #define CONFIG_OF_LIBFDT        1
 340 #define CONFIG_OF_BOARD_SETUP   1
 341 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 342
 343 /* I2C */
 344 #define CONFIG_SYS_I2C
 345 #define CONFIG_SYS_I2C_FSL
 346 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 347 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 348 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 349 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 350 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 351 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 352 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x69} }
 353
 354 /* SPI */
 355 #define CONFIG_MPC8XXX_SPI
 356 #undef CONFIG_SOFT_SPI                  /* SPI bit-banged */
 357
 358 /* GPIOs.  Used as SPI chip selects */
 359 #define CONFIG_SYS_GPIO1_PRELIM
 360 #define CONFIG_SYS_GPIO1_DIR            0xC0000000  /* SPI CS on 0, LED on 1 */
 361 #define CONFIG_SYS_GPIO1_DAT            0xC0000000  /* Both are active LOW */
 362
 363 /* TSEC */
 364 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 365 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 366 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 367 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 368
 369 /* USB */
 370 #define CONFIG_SYS_USE_MPC834XSYS_USB_PHY       1 /* Use SYS board PHY */
 371
 372 /*
 373  * General PCI
 374  * Addresses are mapped 1-1.
 375  */
 376 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 377 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 378 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 379 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 380 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 381 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 382 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 383 #define CONFIG_SYS_PCI1_IO_PHYS         0xE2000000
 384 #define CONFIG_SYS_PCI1_IO_SIZE         0x00100000      /* 1M */
 385
 386 #define CONFIG_SYS_PCI2_MEM_BASE        0xA0000000
 387 #define CONFIG_SYS_PCI2_MEM_PHYS        CONFIG_SYS_PCI2_MEM_BASE
 388 #define CONFIG_SYS_PCI2_MEM_SIZE        0x10000000      /* 256M */
 389 #define CONFIG_SYS_PCI2_MMIO_BASE       0xB0000000
 390 #define CONFIG_SYS_PCI2_MMIO_PHYS       CONFIG_SYS_PCI2_MMIO_BASE
 391 #define CONFIG_SYS_PCI2_MMIO_SIZE       0x10000000      /* 256M */
 392 #define CONFIG_SYS_PCI2_IO_BASE         0x00000000
 393 #define CONFIG_SYS_PCI2_IO_PHYS         0xE2100000
 394 #define CONFIG_SYS_PCI2_IO_SIZE         0x00100000      /* 1M */
 395
 396 #if defined(CONFIG_PCI)
 397
 398 #define PCI_ONE_PCI1
 399 #if defined(PCI_64BIT)
 400 #undef PCI_ALL_PCI1
 401 #undef PCI_TWO_PCI1
 402 #undef PCI_ONE_PCI1
 403 #endif
 404
 405 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 406 #define CONFIG_83XX_PCI_STREAMING
 407
 408 #undef CONFIG_EEPRO100
 409 #undef CONFIG_TULIP
 410
 411 #if !defined(CONFIG_PCI_PNP)
 412         #define PCI_ENET0_IOADDR        0xFIXME
 413         #define PCI_ENET0_MEMADDR       0xFIXME
 414         #define PCI_IDSEL_NUMBER        0x0c    /* slot0->3(IDSEL)=12->15 */
 415 #endif
 416
 417 #undef CONFIG_PCI_SCAN_SHOW             /* show pci devices on startup */
 418 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
 419
 420 #endif  /* CONFIG_PCI */
 421
 422 /*
 423  * TSEC configuration
 424  */
 425 #define CONFIG_TSEC_ENET        /* TSEC ethernet support */
 426
 427 #if defined(CONFIG_TSEC_ENET)
 428
 429 #define CONFIG_GMII             1       /* MII PHY management */
 430 #define CONFIG_TSEC1            1
 431 #define CONFIG_TSEC1_NAME       "TSEC0"
 432 #define CONFIG_TSEC2            1
 433 #define CONFIG_TSEC2_NAME       "TSEC1"
 434 #define TSEC1_PHY_ADDR          0
 435 #define TSEC2_PHY_ADDR          1
 436 #define TSEC1_PHYIDX            0
 437 #define TSEC2_PHYIDX            0
 438 #define TSEC1_FLAGS             TSEC_GIGABIT
 439 #define TSEC2_FLAGS             TSEC_GIGABIT
 440
 441 /* Options are: TSEC[0-1] */
 442 #define CONFIG_ETHPRIME         "TSEC0"
 443
 444 #endif  /* CONFIG_TSEC_ENET */
 445
 446 /*
 447  * Configure on-board RTC
 448  */
 449 #define CONFIG_RTC_DS1374               /* use ds1374 rtc via i2c */
 450 #define CONFIG_SYS_I2C_RTC_ADDR 0x68    /* at address 0x68 */
 451
 452 /*
 453  * Environment
 454  */
 455 #ifndef CONFIG_SYS_RAMBOOT
 456         #define CONFIG_ENV_IS_IN_FLASH  1
 457         #define CONFIG_ENV_ADDR         \
 458                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 459         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 460         #define CONFIG_ENV_SIZE         0x2000
 461
 462 /* Address and size of Redundant Environment Sector     */
 463 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 464 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 465
 466 #else
 467         #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
 468         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 469         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 470         #define CONFIG_ENV_SIZE         0x2000
 471 #endif
 472
 473 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 474 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 475
 476
 477 /*
 478  * BOOTP options
 479  */
 480 #define CONFIG_BOOTP_BOOTFILESIZE
 481 #define CONFIG_BOOTP_BOOTPATH
 482 #define CONFIG_BOOTP_GATEWAY
 483 #define CONFIG_BOOTP_HOSTNAME
 484
 485
 486 /*
 487  * Command line configuration.
 488  */
 489 #include <config_cmd_default.h>
 490
 491 #define CONFIG_CMD_PING
 492 #define CONFIG_CMD_I2C
 493 #define CONFIG_CMD_DATE
 494 #define CONFIG_CMD_MII
 495
 496 #if defined(CONFIG_PCI)
 497     #define CONFIG_CMD_PCI
 498 #endif
 499
 500 #if defined(CONFIG_SYS_RAMBOOT)
 501     #undef CONFIG_CMD_SAVEENV
 502     #undef CONFIG_CMD_LOADS
 503 #endif
 504
 505
 506 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 507
 508 /*
 509  * Miscellaneous configurable options
 510  */
 511 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 512 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 513
 514 #if defined(CONFIG_CMD_KGDB)
 515         #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 516 #else
 517         #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 518 #endif
 519
 520                                 /* Print Buffer Size */
 521 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 522 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 523                                 /* Boot Argument Buffer Size */
 524 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 525
 526 /*
 527  * For booting Linux, the board info and command line data
 528  * have to be in the first 256 MB of memory, since this is
 529  * the maximum mapped by the Linux kernel during initialization.
 530  */
 531                                 /* Initial Memory map for Linux*/
 532 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)
 533
 534 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 535
 536 #if 1 /*528/264*/
 537 #define CONFIG_SYS_HRCW_LOW (\
 538         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 539         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 540         HRCWL_CSB_TO_CLKIN |\
 541         HRCWL_VCO_1X2 |\
 542         HRCWL_CORE_TO_CSB_2X1)
 543 #elif 0 /*396/132*/
 544 #define CONFIG_SYS_HRCW_LOW (\
 545         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 546         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 547         HRCWL_CSB_TO_CLKIN |\
 548         HRCWL_VCO_1X4 |\
 549         HRCWL_CORE_TO_CSB_3X1)
 550 #elif 0 /*264/132*/
 551 #define CONFIG_SYS_HRCW_LOW (\
 552         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 553         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 554         HRCWL_CSB_TO_CLKIN |\
 555         HRCWL_VCO_1X4 |\
 556         HRCWL_CORE_TO_CSB_2X1)
 557 #elif 0 /*132/132*/
 558 #define CONFIG_SYS_HRCW_LOW (\
 559         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 560         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 561         HRCWL_CSB_TO_CLKIN |\
 562         HRCWL_VCO_1X4 |\
 563         HRCWL_CORE_TO_CSB_1X1)
 564 #elif 0 /*264/264 */
 565 #define CONFIG_SYS_HRCW_LOW (\
 566         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 567         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 568         HRCWL_CSB_TO_CLKIN |\
 569         HRCWL_VCO_1X4 |\
 570         HRCWL_CORE_TO_CSB_1X1)
 571 #endif
 572
 573 #ifdef CONFIG_PCISLAVE
 574 #define CONFIG_SYS_HRCW_HIGH (\
 575         HRCWH_PCI_AGENT |\
 576         HRCWH_64_BIT_PCI |\
 577         HRCWH_PCI1_ARBITER_DISABLE |\
 578         HRCWH_PCI2_ARBITER_DISABLE |\
 579         HRCWH_CORE_ENABLE |\
 580         HRCWH_FROM_0X00000100 |\
 581         HRCWH_BOOTSEQ_DISABLE |\
 582         HRCWH_SW_WATCHDOG_DISABLE |\
 583         HRCWH_ROM_LOC_LOCAL_16BIT |\
 584         HRCWH_TSEC1M_IN_GMII |\
 585         HRCWH_TSEC2M_IN_GMII)
 586 #else
 587 #if defined(PCI_64BIT)
 588 #define CONFIG_SYS_HRCW_HIGH (\
 589         HRCWH_PCI_HOST |\
 590         HRCWH_64_BIT_PCI |\
 591         HRCWH_PCI1_ARBITER_ENABLE |\
 592         HRCWH_PCI2_ARBITER_DISABLE |\
 593         HRCWH_CORE_ENABLE |\
 594         HRCWH_FROM_0X00000100 |\
 595         HRCWH_BOOTSEQ_DISABLE |\
 596         HRCWH_SW_WATCHDOG_DISABLE |\
 597         HRCWH_ROM_LOC_LOCAL_16BIT |\
 598         HRCWH_TSEC1M_IN_GMII |\
 599         HRCWH_TSEC2M_IN_GMII)
 600 #else
 601 #define CONFIG_SYS_HRCW_HIGH (\
 602         HRCWH_PCI_HOST |\
 603         HRCWH_32_BIT_PCI |\
 604         HRCWH_PCI1_ARBITER_ENABLE |\
 605         HRCWH_PCI2_ARBITER_ENABLE |\
 606         HRCWH_CORE_ENABLE |\
 607         HRCWH_FROM_0X00000100 |\
 608         HRCWH_BOOTSEQ_DISABLE |\
 609         HRCWH_SW_WATCHDOG_DISABLE |\
 610         HRCWH_ROM_LOC_LOCAL_16BIT |\
 611         HRCWH_TSEC1M_IN_GMII |\
 612         HRCWH_TSEC2M_IN_GMII)
 613 #endif /* PCI_64BIT */
 614 #endif /* CONFIG_PCISLAVE */
 615
 616 /*
 617  * System performance
 618  */
 619 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth (0-3) */
 620 #define CONFIG_SYS_ACR_RPTCNT   3       /* Arbiter repeat count (0-7) */
 621 #define CONFIG_SYS_SPCR_TSEC1EP 3       /* TSEC1 emergency priority (0-3) */
 622 #define CONFIG_SYS_SPCR_TSEC2EP 3       /* TSEC2 emergency priority (0-3) */
 623 #define CONFIG_SYS_SCCR_TSEC1CM 1       /* TSEC1 clock mode (0-3) */
 624 #define CONFIG_SYS_SCCR_TSEC2CM 1       /* TSEC2 & I2C0 clock mode (0-3) */
 625
 626 /* System IO Config */
 627 #define CONFIG_SYS_SICRH 0
 628 #define CONFIG_SYS_SICRL SICRL_LDP_A
 629
 630 #define CONFIG_SYS_HID0_INIT    0x000000000
 631 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK \
 632                                 | HID0_ENABLE_INSTRUCTION_CACHE)
 633
 634 /* #define CONFIG_SYS_HID0_FINAL        (\
 635         HID0_ENABLE_INSTRUCTION_CACHE |\
 636         HID0_ENABLE_M_BIT |\
 637         HID0_ENABLE_ADDRESS_BROADCAST) */
 638
 639
 640 #define CONFIG_SYS_HID2 HID2_HBE
 641 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 642
 643 /* DDR @ 0x00000000 */
 644 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE \
 645                                 | BATL_PP_RW \
 646                                 | BATL_MEMCOHERENCE)
 647 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 648                                 | BATU_BL_256M \
 649                                 | BATU_VS \
 650                                 | BATU_VP)
 651
 652 /* PCI @ 0x80000000 */
 653 #ifdef CONFIG_PCI
 654 #define CONFIG_PCI_INDIRECT_BRIDGE
 655 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE \
 656                                 | BATL_PP_RW \
 657                                 | BATL_MEMCOHERENCE)
 658 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE \
 659                                 | BATU_BL_256M \
 660                                 | BATU_VS \
 661                                 | BATU_VP)
 662 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE \
 663                                 | BATL_PP_RW \
 664                                 | BATL_CACHEINHIBIT \
 665                                 | BATL_GUARDEDSTORAGE)
 666 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE \
 667                                 | BATU_BL_256M \
 668                                 | BATU_VS \
 669                                 | BATU_VP)
 670 #else
 671 #define CONFIG_SYS_IBAT1L       (0)
 672 #define CONFIG_SYS_IBAT1U       (0)
 673 #define CONFIG_SYS_IBAT2L       (0)
 674 #define CONFIG_SYS_IBAT2U       (0)
 675 #endif
 676
 677 #ifdef CONFIG_MPC83XX_PCI2
 678 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_PCI2_MEM_BASE \
 679                                 | BATL_PP_RW \
 680                                 | BATL_MEMCOHERENCE)
 681 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_PCI2_MEM_BASE \
 682                                 | BATU_BL_256M \
 683                                 | BATU_VS \
 684                                 | BATU_VP)
 685 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI2_MMIO_BASE \
 686                                 | BATL_PP_RW \
 687                                 | BATL_CACHEINHIBIT \
 688                                 | BATL_GUARDEDSTORAGE)
 689 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI2_MMIO_BASE \
 690                                 | BATU_BL_256M \
 691                                 | BATU_VS \
 692                                 | BATU_VP)
 693 #else
 694 #define CONFIG_SYS_IBAT3L       (0)
 695 #define CONFIG_SYS_IBAT3U       (0)
 696 #define CONFIG_SYS_IBAT4L       (0)
 697 #define CONFIG_SYS_IBAT4U       (0)
 698 #endif
 699
 700 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 701 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR \
 702                                 | BATL_PP_RW \
 703                                 | BATL_CACHEINHIBIT \
 704                                 | BATL_GUARDEDSTORAGE)
 705 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR \
 706                                 | BATU_BL_256M \
 707                                 | BATU_VS \
 708                                 | BATU_VP)
 709
 710 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 711 #define CONFIG_SYS_IBAT6L       (0xF0000000 \
 712                                 | BATL_PP_RW \
 713                                 | BATL_MEMCOHERENCE \
 714                                 | BATL_GUARDEDSTORAGE)
 715 #define CONFIG_SYS_IBAT6U       (0xF0000000 \
 716                                 | BATU_BL_256M \
 717                                 | BATU_VS \
 718                                 | BATU_VP)
 719
 720 #define CONFIG_SYS_IBAT7L       (0)
 721 #define CONFIG_SYS_IBAT7U       (0)
 722
 723 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 724 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 725 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 726 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 727 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 728 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 729 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 730 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 731 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 732 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 733 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 734 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 735 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 736 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 737 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 738 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 739
 740 #if defined(CONFIG_CMD_KGDB)
 741 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 742 #endif
 743
 744 /*
 745  * Environment Configuration
 746  */
 747 #define CONFIG_ENV_OVERWRITE
 748
 749 #if defined(CONFIG_TSEC_ENET)
 750 #define CONFIG_HAS_ETH1
 751 #define CONFIG_HAS_ETH0
 752 #endif
 753
 754 #define CONFIG_HOSTNAME         mpc8349emds
 755 #define CONFIG_ROOTPATH         "/nfsroot/rootfs"
 756 #define CONFIG_BOOTFILE         "uImage"
 757
 758 #define CONFIG_LOADADDR 800000  /* default location for tftp and bootm */
 759
 760 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 761 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 762
 763 #define CONFIG_BAUDRATE  115200
 764
 765 #define CONFIG_PREBOOT  "echo;" \
 766         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 767         "echo"
 768
 769 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 770         "netdev=eth0\0"                                                 \
 771         "hostname=mpc8349emds\0"                                        \
 772         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 773                 "nfsroot=${serverip}:${rootpath}\0"                     \
 774         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 775         "addip=setenv bootargs ${bootargs} "                            \
 776                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 777                 ":${hostname}:${netdev}:off panic=1\0"                  \
 778         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 779         "flash_nfs=run nfsargs addip addtty;"                           \
 780                 "bootm ${kernel_addr}\0"                                \
 781         "flash_self=run ramargs addip addtty;"                          \
 782                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 783         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 784                 "bootm\0"                                               \
 785         "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0"           \
 786         "update=protect off fe000000 fe03ffff; "                        \
 787                 "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"\
 788         "upd=run load update\0"                                         \
 789         "fdtaddr=780000\0"                                              \
 790         "fdtfile=mpc834x_mds.dtb\0"                                     \
 791         ""
 792
 793 #define CONFIG_NFSBOOTCOMMAND                                           \
 794         "setenv bootargs root=/dev/nfs rw "                             \
 795                 "nfsroot=$serverip:$rootpath "                          \
 796                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"   \
 797                                                         "$netdev:off "  \
 798                 "console=$consoledev,$baudrate $othbootargs;"           \
 799         "tftp $loadaddr $bootfile;"                                     \
 800         "tftp $fdtaddr $fdtfile;"                                       \
 801         "bootm $loadaddr - $fdtaddr"
 802
 803 #define CONFIG_RAMBOOTCOMMAND                                           \
 804         "setenv bootargs root=/dev/ram rw "                             \
 805                 "console=$consoledev,$baudrate $othbootargs;"           \
 806         "tftp $ramdiskaddr $ramdiskfile;"                               \
 807         "tftp $loadaddr $bootfile;"                                     \
 808         "tftp $fdtaddr $fdtfile;"                                       \
 809         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 810
 811 #define CONFIG_BOOTCOMMAND      "run flash_self"
 812
 813 #endif  /* __CONFIG_H */