include/configs/MPC8349ITX.h

   1 /*
   2  * Copyright (C) Freescale Semiconductor, Inc. 2006.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  MPC8349E-mITX and MPC8349E-mITX-GP board configuration file
   9
  10  Memory map:
  11
  12  0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB)
  13  0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB)
  14  0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB)
  15  0xE000_0000-0xEFFF_FFFF IMMR (1 MB)
  16  0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB)
  17  0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB)
  18  0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only)
  19  0xF001_0000-0xF001_FFFF Local bus expansion slot
  20  0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only)
  21  0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory
  22  0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only)
  23
  24  I2C address list:
  25                                                 Align.  Board
  26  Bus    Addr    Part No.        Description     Length  Location
  27  ----------------------------------------------------------------
  28  I2C0   0x50    M24256-BWMN6P   Board EEPROM    2       U64
  29
  30  I2C1   0x20    PCF8574         I2C Expander    0       U8
  31  I2C1   0x21    PCF8574         I2C Expander    0       U10
  32  I2C1   0x38    PCF8574A        I2C Expander    0       U8
  33  I2C1   0x39    PCF8574A        I2C Expander    0       U10
  34  I2C1   0x51    (DDR)           DDR EEPROM      1       U1
  35  I2C1   0x68    DS1339          RTC             1       U68
  36
  37  Note that a given board has *either* a pair of 8574s or a pair of 8574As.
  38 */
  39
  40 #ifndef __CONFIG_H
  41 #define __CONFIG_H
  42
  43 #if (CONFIG_SYS_TEXT_BASE == 0xFE000000)
  44 #define CONFIG_SYS_LOWBOOT
  45 #endif
  46
  47 /*
  48  * High Level Configuration Options
  49  */
  50 #define CONFIG_MPC834x          /* MPC834x family (8343, 8347, 8349) */
  51 #define CONFIG_MPC8349          /* MPC8349 specific */
  52
  53 #ifndef CONFIG_SYS_TEXT_BASE
  54 #define CONFIG_SYS_TEXT_BASE    0xFEF00000
  55 #endif
  56
  57 #define CONFIG_SYS_IMMR 0xE0000000      /* The IMMR is relocated to here */
  58
  59 #define CONFIG_MISC_INIT_F
  60 #define CONFIG_MISC_INIT_R
  61
  62 /*
  63  * On-board devices
  64  */
  65
  66 #ifdef CONFIG_MPC8349ITX
  67 /* The CF card interface on the back of the board */
  68 #define CONFIG_COMPACT_FLASH
  69 #define CONFIG_VSC7385_ENET     /* VSC7385 ethernet support */
  70 #define CONFIG_SATA_SIL3114     /* SIL3114 SATA controller */
  71 #define CONFIG_SYS_USB_HOST     /* use the EHCI USB controller */
  72 #endif
  73
  74 #define CONFIG_RTC_DS1337
  75 #define CONFIG_SYS_I2C
  76 #define CONFIG_TSEC_ENET                /* TSEC Ethernet support */
  77
  78 /*
  79  * Device configurations
  80  */
  81
  82 /* I2C */
  83 #ifdef CONFIG_SYS_I2C
  84 #define CONFIG_SYS_I2C_FSL
  85 #define CONFIG_SYS_FSL_I2C_SPEED        400000
  86 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
  87 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
  88 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
  89 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
  90 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
  91
  92 #define CONFIG_SYS_SPD_BUS_NUM          1       /* The I2C bus for SPD */
  93 #define CONFIG_SYS_RTC_BUS_NUM          1       /* The I2C bus for RTC */
  94
  95 #define CONFIG_SYS_I2C_8574_ADDR1       0x20    /* I2C1, PCF8574 */
  96 #define CONFIG_SYS_I2C_8574_ADDR2       0x21    /* I2C1, PCF8574 */
  97 #define CONFIG_SYS_I2C_8574A_ADDR1      0x38    /* I2C1, PCF8574A */
  98 #define CONFIG_SYS_I2C_8574A_ADDR2      0x39    /* I2C1, PCF8574A */
  99 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* I2C0, Board EEPROM */
 100 #define CONFIG_SYS_I2C_RTC_ADDR         0x68    /* I2C1, DS1339 RTC*/
 101 #define SPD_EEPROM_ADDRESS              0x51    /* I2C1, DDR */
 102
 103 /* Don't probe these addresses: */
 104 #define CONFIG_SYS_I2C_NOPROBES { {1, CONFIG_SYS_I2C_8574_ADDR1}, \
 105                                  {1, CONFIG_SYS_I2C_8574_ADDR2}, \
 106                                  {1, CONFIG_SYS_I2C_8574A_ADDR1}, \
 107                                  {1, CONFIG_SYS_I2C_8574A_ADDR2} }
 108 /* Bit definitions for the 8574[A] I2C expander */
 109                                 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */
 110 #define I2C_8574_REVISION       0x03
 111 #define I2C_8574_CF             0x08    /* 1=Compact flash absent, 0=present */
 112 #define I2C_8574_MPCICLKRN      0x10    /* MiniPCI Clk Run */
 113 #define I2C_8574_PCI66          0x20    /* 0=33MHz PCI, 1=66MHz PCI */
 114 #define I2C_8574_FLASHSIDE      0x40    /* 0=Reset vector from U4, 1=from U7*/
 115
 116 #endif
 117
 118 /* Compact Flash */
 119 #ifdef CONFIG_COMPACT_FLASH
 120
 121 #define CONFIG_SYS_IDE_MAXBUS           1
 122 #define CONFIG_SYS_IDE_MAXDEVICE        1
 123
 124 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 125 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_CF_BASE
 126 #define CONFIG_SYS_ATA_DATA_OFFSET      0x0000
 127 #define CONFIG_SYS_ATA_REG_OFFSET       0
 128 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0200
 129 #define CONFIG_SYS_ATA_STRIDE           2
 130
 131 /* If a CF card is not inserted, time out quickly */
 132 #define ATA_RESET_TIME  1
 133
 134 #endif
 135
 136 /*
 137  * SATA
 138  */
 139 #ifdef CONFIG_SATA_SIL3114
 140
 141 #define CONFIG_SYS_SATA_MAX_DEVICE      4
 142 #define CONFIG_LIBATA
 143 #define CONFIG_LBA48
 144
 145 #endif
 146
 147 #ifdef CONFIG_SYS_USB_HOST
 148 /*
 149  * Support USB
 150  */
 151 #define CONFIG_USB_EHCI_FSL
 152
 153 /* Current USB implementation supports the only USB controller,
 154  * so we have to choose between the MPH or the DR ones */
 155 #if 1
 156 #define CONFIG_HAS_FSL_MPH_USB
 157 #else
 158 #define CONFIG_HAS_FSL_DR_USB
 159 #endif
 160
 161 #endif
 162
 163 /*
 164  * DDR Setup
 165  */
 166 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory*/
 167 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 168 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 169 #define CONFIG_SYS_83XX_DDR_USES_CS0
 170 #define CONFIG_SYS_MEMTEST_START        0x1000  /* memtest region */
 171 #define CONFIG_SYS_MEMTEST_END          0x2000
 172
 173 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN \
 174                                         | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
 175
 176 #define CONFIG_VERY_BIG_RAM
 177 #define CONFIG_MAX_MEM_MAPPED   ((phys_size_t)256 << 20)
 178
 179 #ifdef CONFIG_SYS_I2C
 180 #define CONFIG_SPD_EEPROM               /* use SPD EEPROM for DDR setup*/
 181 #endif
 182
 183 /* No SPD? Then manually set up DDR parameters */
 184 #ifndef CONFIG_SPD_EEPROM
 185     #define CONFIG_SYS_DDR_SIZE         256     /* Mb */
 186     #define CONFIG_SYS_DDR_CS0_CONFIG   (CSCONFIG_EN \
 187                                         | CSCONFIG_ROW_BIT_13 \
 188                                         | CSCONFIG_COL_BIT_10)
 189
 190     #define CONFIG_SYS_DDR_TIMING_1     0x26242321
 191     #define CONFIG_SYS_DDR_TIMING_2     0x00000800  /* P9-45, may need tuning */
 192 #endif
 193
 194 /*
 195  *Flash on the Local Bus
 196  */
 197
 198 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 199 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 200 #define CONFIG_SYS_FLASH_BASE           0xFE000000      /* start of FLASH   */
 201 #define CONFIG_SYS_FLASH_EMPTY_INFO
 202 /* 127 64KB sectors + 8 8KB sectors per device */
 203 #define CONFIG_SYS_MAX_FLASH_SECT       135
 204 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 205 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 206 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 207
 208 /* The ITX has two flash chips, but the ITX-GP has only one.  To support both
 209 boards, we say we have two, but don't display a message if we find only one. */
 210 #define CONFIG_SYS_FLASH_QUIET_TEST
 211 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 212 #define CONFIG_SYS_FLASH_BANKS_LIST     \
 213                 {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000}
 214 #define CONFIG_SYS_FLASH_SIZE           16      /* FLASH size in MB */
 215 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
 216
 217 /* Vitesse 7385 */
 218
 219 #ifdef CONFIG_VSC7385_ENET
 220
 221 #define CONFIG_TSEC2
 222
 223 /* The flash address and size of the VSC7385 firmware image */
 224 #define CONFIG_VSC7385_IMAGE            0xFEFFE000
 225 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 226
 227 #endif
 228
 229 /*
 230  * BRx, ORx, LBLAWBARx, and LBLAWARx
 231  */
 232
 233 /* Flash */
 234
 235 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE \
 236                                 | BR_PS_16 \
 237                                 | BR_MS_GPCM \
 238                                 | BR_V)
 239 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 240                                 | OR_UPM_XAM \
 241                                 | OR_GPCM_CSNT \
 242                                 | OR_GPCM_ACS_DIV2 \
 243                                 | OR_GPCM_XACS \
 244                                 | OR_GPCM_SCY_15 \
 245                                 | OR_GPCM_TRLX_SET \
 246                                 | OR_GPCM_EHTR_SET \
 247                                 | OR_GPCM_EAD)
 248 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 249 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_16MB)
 250
 251 /* Vitesse 7385 */
 252
 253 #define CONFIG_SYS_VSC7385_BASE 0xF8000000
 254
 255 #ifdef CONFIG_VSC7385_ENET
 256
 257 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_VSC7385_BASE \
 258                                 | BR_PS_8 \
 259                                 | BR_MS_GPCM \
 260                                 | BR_V)
 261 #define CONFIG_SYS_OR1_PRELIM   (OR_AM_128KB \
 262                                 | OR_GPCM_CSNT \
 263                                 | OR_GPCM_XACS \
 264                                 | OR_GPCM_SCY_15 \
 265                                 | OR_GPCM_SETA \
 266                                 | OR_GPCM_TRLX_SET \
 267                                 | OR_GPCM_EHTR_SET \
 268                                 | OR_GPCM_EAD)
 269
 270 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_VSC7385_BASE
 271 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_128KB)
 272
 273 #endif
 274
 275 /* LED */
 276
 277 #define CONFIG_SYS_LED_BASE     0xF9000000
 278 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_LED_BASE \
 279                                 | BR_PS_8 \
 280                                 | BR_MS_GPCM \
 281                                 | BR_V)
 282 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_2MB \
 283                                 | OR_GPCM_CSNT \
 284                                 | OR_GPCM_ACS_DIV2 \
 285                                 | OR_GPCM_XACS \
 286                                 | OR_GPCM_SCY_9 \
 287                                 | OR_GPCM_TRLX_SET \
 288                                 | OR_GPCM_EHTR_SET \
 289                                 | OR_GPCM_EAD)
 290
 291 /* Compact Flash */
 292
 293 #ifdef CONFIG_COMPACT_FLASH
 294
 295 #define CONFIG_SYS_CF_BASE      0xF0000000
 296
 297 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_CF_BASE \
 298                                 | BR_PS_16 \
 299                                 | BR_MS_UPMA \
 300                                 | BR_V)
 301 #define CONFIG_SYS_OR3_PRELIM   (OR_UPM_AM | OR_UPM_BI)
 302
 303 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_CF_BASE
 304 #define CONFIG_SYS_LBLAWAR3_PRELIM      (LBLAWAR_EN | LBLAWAR_64KB)
 305
 306 #endif
 307
 308 /*
 309  * U-Boot memory configuration
 310  */
 311 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 312
 313 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 314 #define CONFIG_SYS_RAMBOOT
 315 #else
 316 #undef  CONFIG_SYS_RAMBOOT
 317 #endif
 318
 319 #define CONFIG_SYS_INIT_RAM_LOCK
 320 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000      /* Initial RAM addr */
 321 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000  /* Size of used area in RAM*/
 322
 323 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 324                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 325 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 326
 327 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 328 #define CONFIG_SYS_MONITOR_LEN  (512 * 1024) /* Reserve 512 kB for Mon */
 329 #define CONFIG_SYS_MALLOC_LEN   (256 * 1024) /* Reserved for malloc */
 330
 331 /*
 332  * Local Bus LCRR and LBCR regs
 333  *    LCRR:  DLL bypass, Clock divider is 4
 334  * External Local Bus rate is
 335  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
 336  */
 337 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 338 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 339 #define CONFIG_SYS_LBC_LBCR     0x00000000
 340
 341                                 /* LB sdram refresh timer, about 6us */
 342 #define CONFIG_SYS_LBC_LSRT     0x32000000
 343                                 /* LB refresh timer prescal, 266MHz/32*/
 344 #define CONFIG_SYS_LBC_MRTPR    0x20000000
 345
 346 /*
 347  * Serial Port
 348  */
 349 #define CONFIG_CONS_INDEX       1
 350 #define CONFIG_SYS_NS16550_SERIAL
 351 #define CONFIG_SYS_NS16550_REG_SIZE     1
 352 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 353
 354 #define CONFIG_SYS_BAUDRATE_TABLE  \
 355                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 356
 357 #define CONSOLE                 ttyS0
 358
 359 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
 360 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
 361
 362 /*
 363  * PCI
 364  */
 365 #ifdef CONFIG_PCI
 366 #define CONFIG_PCI_INDIRECT_BRIDGE
 367
 368 #define CONFIG_MPC83XX_PCI2
 369
 370 /*
 371  * General PCI
 372  * Addresses are mapped 1-1.
 373  */
 374 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 375 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 376 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 377 #define CONFIG_SYS_PCI1_MMIO_BASE       \
 378                         (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
 379 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 380 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 381 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 382 #define CONFIG_SYS_PCI1_IO_PHYS         0xE2000000
 383 #define CONFIG_SYS_PCI1_IO_SIZE         0x01000000      /* 16M */
 384
 385 #ifdef CONFIG_MPC83XX_PCI2
 386 #define CONFIG_SYS_PCI2_MEM_BASE        \
 387                         (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE)
 388 #define CONFIG_SYS_PCI2_MEM_PHYS        CONFIG_SYS_PCI2_MEM_BASE
 389 #define CONFIG_SYS_PCI2_MEM_SIZE        0x10000000      /* 256M */
 390 #define CONFIG_SYS_PCI2_MMIO_BASE       \
 391                         (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE)
 392 #define CONFIG_SYS_PCI2_MMIO_PHYS       CONFIG_SYS_PCI2_MMIO_BASE
 393 #define CONFIG_SYS_PCI2_MMIO_SIZE       0x10000000      /* 256M */
 394 #define CONFIG_SYS_PCI2_IO_BASE         0x00000000
 395 #define CONFIG_SYS_PCI2_IO_PHYS         \
 396                         (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE)
 397 #define CONFIG_SYS_PCI2_IO_SIZE         0x01000000      /* 16M */
 398 #endif
 399
 400 #ifndef CONFIG_PCI_PNP
 401     #define PCI_ENET0_IOADDR    0x00000000
 402     #define PCI_ENET0_MEMADDR   CONFIG_SYS_PCI2_MEM_BASE
 403     #define PCI_IDSEL_NUMBER    0x0f    /* IDSEL = AD15 */
 404 #endif
 405
 406 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 407
 408 #endif
 409
 410 #define CONFIG_PCI_66M
 411 #ifdef CONFIG_PCI_66M
 412 #define CONFIG_83XX_CLKIN       66666666        /* in Hz */
 413 #else
 414 #define CONFIG_83XX_CLKIN       33333333        /* in Hz */
 415 #endif
 416
 417 /* TSEC */
 418
 419 #ifdef CONFIG_TSEC_ENET
 420
 421 #define CONFIG_MII
 422 #define CONFIG_PHY_GIGE         /* In case CONFIG_CMD_MII is specified */
 423
 424 #define CONFIG_TSEC1
 425
 426 #ifdef CONFIG_TSEC1
 427 #define CONFIG_HAS_ETH0
 428 #define CONFIG_TSEC1_NAME  "TSEC0"
 429 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 430 #define TSEC1_PHY_ADDR          0x1c    /* VSC8201 uses address 0x1c */
 431 #define TSEC1_PHYIDX            0
 432 #define TSEC1_FLAGS             TSEC_GIGABIT
 433 #endif
 434
 435 #ifdef CONFIG_TSEC2
 436 #define CONFIG_HAS_ETH1
 437 #define CONFIG_TSEC2_NAME  "TSEC1"
 438 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 439
 440 #define TSEC2_PHY_ADDR          4
 441 #define TSEC2_PHYIDX            0
 442 #define TSEC2_FLAGS             TSEC_GIGABIT
 443 #endif
 444
 445 #define CONFIG_ETHPRIME         "Freescale TSEC"
 446
 447 #endif
 448
 449 /*
 450  * Environment
 451  */
 452 #define CONFIG_ENV_OVERWRITE
 453
 454 #ifndef CONFIG_SYS_RAMBOOT
 455   #define CONFIG_ENV_IS_IN_FLASH
 456   #define CONFIG_ENV_ADDR       \
 457                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 458   #define CONFIG_ENV_SECT_SIZE  0x10000 /* 64K (one sector) for environment */
 459   #define CONFIG_ENV_SIZE       0x2000
 460 #else
 461   #undef  CONFIG_FLASH_CFI_DRIVER
 462   #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
 463   #define CONFIG_ENV_ADDR       (CONFIG_SYS_MONITOR_BASE - 0x1000)
 464   #define CONFIG_ENV_SIZE       0x2000
 465 #endif
 466
 467 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 468 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 469
 470 /*
 471  * BOOTP options
 472  */
 473 #define CONFIG_BOOTP_BOOTFILESIZE
 474 #define CONFIG_BOOTP_BOOTPATH
 475 #define CONFIG_BOOTP_GATEWAY
 476 #define CONFIG_BOOTP_HOSTNAME
 477
 478 /*
 479  * Command line configuration.
 480  */
 481 #define CONFIG_CMD_SDRAM
 482
 483 #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
 484                                 || defined(CONFIG_USB_STORAGE)
 485         #define CONFIG_SUPPORT_VFAT
 486 #endif
 487
 488 #ifdef CONFIG_SATA_SIL3114
 489         #define CONFIG_CMD_SATA
 490 #endif
 491
 492 #if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE)
 493 #endif
 494
 495 #ifdef CONFIG_PCI
 496         #define CONFIG_CMD_PCI
 497 #endif
 498
 499 /* Watchdog */
 500 #undef CONFIG_WATCHDOG          /* watchdog disabled */
 501
 502 /*
 503  * Miscellaneous configurable options
 504  */
 505 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 506 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 507 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 508
 509 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 510 #define CONFIG_LOADADDR 800000  /* default location for tftp and bootm */
 511
 512 #if defined(CONFIG_CMD_KGDB)
 513         #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 514 #else
 515         #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 516 #endif
 517
 518                                 /* Print Buffer Size */
 519 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 520 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 521                                 /* Boot Argument Buffer Size */
 522 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 523
 524 /*
 525  * For booting Linux, the board info and command line data
 526  * have to be in the first 256 MB of memory, since this is
 527  * the maximum mapped by the Linux kernel during initialization.
 528  */
 529                                 /* Initial Memory map for Linux*/
 530 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)
 531 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 532
 533 #define CONFIG_SYS_HRCW_LOW (\
 534         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 535         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 536         HRCWL_CSB_TO_CLKIN_4X1 |\
 537         HRCWL_VCO_1X2 |\
 538         HRCWL_CORE_TO_CSB_2X1)
 539
 540 #ifdef CONFIG_SYS_LOWBOOT
 541 #define CONFIG_SYS_HRCW_HIGH (\
 542         HRCWH_PCI_HOST |\
 543         HRCWH_32_BIT_PCI |\
 544         HRCWH_PCI1_ARBITER_ENABLE |\
 545         HRCWH_PCI2_ARBITER_ENABLE |\
 546         HRCWH_CORE_ENABLE |\
 547         HRCWH_FROM_0X00000100 |\
 548         HRCWH_BOOTSEQ_DISABLE |\
 549         HRCWH_SW_WATCHDOG_DISABLE |\
 550         HRCWH_ROM_LOC_LOCAL_16BIT |\
 551         HRCWH_TSEC1M_IN_GMII |\
 552         HRCWH_TSEC2M_IN_GMII)
 553 #else
 554 #define CONFIG_SYS_HRCW_HIGH (\
 555         HRCWH_PCI_HOST |\
 556         HRCWH_32_BIT_PCI |\
 557         HRCWH_PCI1_ARBITER_ENABLE |\
 558         HRCWH_PCI2_ARBITER_ENABLE |\
 559         HRCWH_CORE_ENABLE |\
 560         HRCWH_FROM_0XFFF00100 |\
 561         HRCWH_BOOTSEQ_DISABLE |\
 562         HRCWH_SW_WATCHDOG_DISABLE |\
 563         HRCWH_ROM_LOC_LOCAL_16BIT |\
 564         HRCWH_TSEC1M_IN_GMII |\
 565         HRCWH_TSEC2M_IN_GMII)
 566 #endif
 567
 568 /*
 569  * System performance
 570  */
 571 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth (0-3) */
 572 #define CONFIG_SYS_ACR_RPTCNT   3       /* Arbiter repeat count (0-7) */
 573 #define CONFIG_SYS_SPCR_TSEC1EP 3       /* TSEC1 emergency priority (0-3) */
 574 #define CONFIG_SYS_SPCR_TSEC2EP 3       /* TSEC2 emergency priority (0-3) */
 575 #define CONFIG_SYS_SCCR_TSEC1CM 1       /* TSEC1 clock mode (0-3) */
 576 #define CONFIG_SYS_SCCR_TSEC2CM 1       /* TSEC2 & I2C0 clock mode (0-3) */
 577 #define CONFIG_SYS_SCCR_USBMPHCM 3      /* USB MPH controller's clock */
 578 #define CONFIG_SYS_SCCR_USBDRCM 0       /* USB DR controller's clock */
 579
 580 /*
 581  * System IO Config
 582  */
 583 /* Needed for gigabit to work on TSEC 1 */
 584 #define CONFIG_SYS_SICRH SICRH_TSOBI1
 585                                 /* USB DR as device + USB MPH as host */
 586 #define CONFIG_SYS_SICRL        (SICRL_LDP_A | SICRL_USB1)
 587
 588 #define CONFIG_SYS_HID0_INIT    0x00000000
 589 #define CONFIG_SYS_HID0_FINAL   HID0_ENABLE_INSTRUCTION_CACHE
 590
 591 #define CONFIG_SYS_HID2 HID2_HBE
 592 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 593
 594 /* DDR  */
 595 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE \
 596                                 | BATL_PP_RW \
 597                                 | BATL_MEMCOHERENCE)
 598 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 599                                 | BATU_BL_256M \
 600                                 | BATU_VS \
 601                                 | BATU_VP)
 602
 603 /* PCI  */
 604 #ifdef CONFIG_PCI
 605 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE \
 606                                 | BATL_PP_RW \
 607                                 | BATL_MEMCOHERENCE)
 608 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE \
 609                                 | BATU_BL_256M \
 610                                 | BATU_VS \
 611                                 | BATU_VP)
 612 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE \
 613                                 | BATL_PP_RW \
 614                                 | BATL_CACHEINHIBIT \
 615                                 | BATL_GUARDEDSTORAGE)
 616 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE \
 617                                 | BATU_BL_256M \
 618                                 | BATU_VS \
 619                                 | BATU_VP)
 620 #else
 621 #define CONFIG_SYS_IBAT1L       0
 622 #define CONFIG_SYS_IBAT1U       0
 623 #define CONFIG_SYS_IBAT2L       0
 624 #define CONFIG_SYS_IBAT2U       0
 625 #endif
 626
 627 #ifdef CONFIG_MPC83XX_PCI2
 628 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_PCI2_MEM_BASE \
 629                                 | BATL_PP_RW \
 630                                 | BATL_MEMCOHERENCE)
 631 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_PCI2_MEM_BASE \
 632                                 | BATU_BL_256M \
 633                                 | BATU_VS \
 634                                 | BATU_VP)
 635 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI2_MMIO_BASE \
 636                                 | BATL_PP_RW \
 637                                 | BATL_CACHEINHIBIT \
 638                                 | BATL_GUARDEDSTORAGE)
 639 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI2_MMIO_BASE \
 640                                 | BATU_BL_256M \
 641                                 | BATU_VS \
 642                                 | BATU_VP)
 643 #else
 644 #define CONFIG_SYS_IBAT3L       0
 645 #define CONFIG_SYS_IBAT3U       0
 646 #define CONFIG_SYS_IBAT4L       0
 647 #define CONFIG_SYS_IBAT4U       0
 648 #endif
 649
 650 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 651 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR \
 652                                 | BATL_PP_RW \
 653                                 | BATL_CACHEINHIBIT \
 654                                 | BATL_GUARDEDSTORAGE)
 655 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR \
 656                                 | BATU_BL_256M \
 657                                 | BATU_VS \
 658                                 | BATU_VP)
 659
 660 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 661 #define CONFIG_SYS_IBAT6L       (0xF0000000 \
 662                                 | BATL_PP_RW \
 663                                 | BATL_MEMCOHERENCE \
 664                                 | BATL_GUARDEDSTORAGE)
 665 #define CONFIG_SYS_IBAT6U       (0xF0000000 \
 666                                 | BATU_BL_256M \
 667                                 | BATU_VS \
 668                                 | BATU_VP)
 669
 670 #define CONFIG_SYS_IBAT7L       0
 671 #define CONFIG_SYS_IBAT7U       0
 672
 673 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 674 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 675 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 676 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 677 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 678 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 679 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 680 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 681 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 682 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 683 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 684 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 685 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 686 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 687 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 688 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 689
 690 #if defined(CONFIG_CMD_KGDB)
 691 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 692 #endif
 693
 694 /*
 695  * Environment Configuration
 696  */
 697 #define CONFIG_ENV_OVERWRITE
 698
 699 #define CONFIG_NETDEV           "eth0"
 700
 701 #ifdef CONFIG_MPC8349ITX
 702 #define CONFIG_HOSTNAME         "mpc8349emitx"
 703 #else
 704 #define CONFIG_HOSTNAME         "mpc8349emitxgp"
 705 #endif
 706
 707 /* Default path and filenames */
 708 #define CONFIG_ROOTPATH         "/nfsroot/rootfs"
 709 #define CONFIG_BOOTFILE         "uImage"
 710                                 /* U-Boot image on TFTP server */
 711 #define CONFIG_UBOOTPATH        "u-boot.bin"
 712
 713 #ifdef CONFIG_MPC8349ITX
 714 #define CONFIG_FDTFILE          "mpc8349emitx.dtb"
 715 #else
 716 #define CONFIG_FDTFILE          "mpc8349emitxgp.dtb"
 717 #endif
 718
 719
 720 #define CONFIG_BOOTARGS \
 721         "root=/dev/nfs rw" \
 722         " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH    \
 723         " ip=" __stringify(CONFIG_IPADDR) ":"           \
 724                 __stringify(CONFIG_SERVERIP) ":"        \
 725                 __stringify(CONFIG_GATEWAYIP) ":"       \
 726                 __stringify(CONFIG_NETMASK) ":"         \
 727                 CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off"                \
 728         " console=" __stringify(CONSOLE) "," __stringify(CONFIG_BAUDRATE)
 729
 730 #define CONFIG_EXTRA_ENV_SETTINGS \
 731         "console=" __stringify(CONSOLE) "\0"                    \
 732         "netdev=" CONFIG_NETDEV "\0"                                    \
 733         "uboot=" CONFIG_UBOOTPATH "\0"                                  \
 734         "tftpflash=tftpboot $loadaddr $uboot; "                         \
 735                 "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 736                         " +$filesize; " \
 737                 "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 738                         " +$filesize; " \
 739                 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 740                         " $filesize; "  \
 741                 "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 742                         " +$filesize; " \
 743                 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 744                         " $filesize\0"  \
 745         "fdtaddr=780000\0"                                              \
 746         "fdtfile=" CONFIG_FDTFILE "\0"
 747
 748 #define CONFIG_NFSBOOTCOMMAND                                           \
 749         "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath"  \
 750         " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\
 751         " console=$console,$baudrate $othbootargs; "                    \
 752         "tftp $loadaddr $bootfile;"                                     \
 753         "tftp $fdtaddr $fdtfile;"                                       \
 754         "bootm $loadaddr - $fdtaddr"
 755
 756 #define CONFIG_RAMBOOTCOMMAND                                           \
 757         "setenv bootargs root=/dev/ram rw"                              \
 758         " console=$console,$baudrate $othbootargs; "                    \
 759         "tftp $ramdiskaddr $ramdiskfile;"                               \
 760         "tftp $loadaddr $bootfile;"                                     \
 761         "tftp $fdtaddr $fdtfile;"                                       \
 762         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 763
 764 #endif